As others have stated, easy video to follow and well explained, extremely helpful to a novice like myself just starting out into rifle, and field target shooting thank you,
Excellent video,, really well explained,, can not thank you enough,, it’s a brilliant scope,, but it can be a bit daunting to setup,,you are definitely the best on to follow,, 👏👏👍🤠
Your explanation helped me a lot! What is the effect of putting the distance on 50 meters or any other distance. I don’t understand this. Another question: sometimes (to often) when ranging a distance it shows ranging error in the scope. Do you have an explanation?
Hi, thanks. The 50 meters or any distance will show holdover in reticle section , think this is more to do with glass scope , range error sometimes with an obstical too close or ranging beyond your ballistic tables furthest distance and sometimes just not recived properly, poor alingment from surface!
Just to say that I've watched your videos on this scope and they are very helpful. However I seem to be struggling to get the ballistic data sent via bluetooth to the scope. Ive set up a profile for my AA S510, addad the JSB Exact Diablo 177 data, saved it ect, but when I bluetooth it over my phone screen shows the spinner, the scope says Synchronize Ballistic Tabe data but I never get successful confirmation. Then when I use the scope I don't get the holdover marker but do get a screen that says Local Device without ballistic table. Frankly struggling to find any help but your vids have helped me get this far so thanks.
Hi, make sure bluetooth on phone up to date , phone location is on , scope and app have latest version, Reboot your phone, If that's all ok you may have to try uninstalling app and then reinstall ,keep a note of your ballistic info you inputted . If that doesn't work email Arken ,contact info is in the app, tell them your problem , tell them what phone you have and the operating system/version it running . Iv contacted them in the past and they do reply ,there helpful. hope you get it sorted 👍
In your parameters settings at 5:56 in the video you show FFP and have it checked, what does it stand for, I was thinking First Focal Plane ? should it be checked or not, or what's it stand for, or is that supposed to be FPS?
Hi, you are correct First Focal Plane , I dont think it matters in the app ,the app can also be used for glass scopes , so that's why the option is there. The zulus reticle is FFP.
@@tylerwolfley2689 Hi , yes, as far as I know Arken zulus specific . You would be able to use the ballistic table for glass scope, using mill dots or MOA
Hi, make sure phone has latest update same with scope and app. Bluetooth switched on in scope menu, You need to have Location turned on in your phone, go to your phone Bluetooth connections see if zulus is there ,if it is select it . don't know what else to try ,if your still having problems send Arken a message , I had a problem on one App update, Bluetooth wouldn't connect Arken sorted it for me, there very good with there customers
@@keithcruickshank5984 no idea why it says ranging button, all I need to do is have scope on, Bluetooth on in scope menu, open app and it connects, if it doesn't connect I go into phone bluetooth and selected zulus, after that it picks up the connection whenever I open app
@@cjoutdoors8264 yes , great video but bump the volume up please and show one how to use in the scope an settings that show the yardage info when you range something. In the manual it isn't very clear, or what sections you should be setting it to. Great info thanks so much, 👍👍👍👍
Good video,,nice and steady to follow,,I'd already got mine set up before watching this video but I think a lot of new starters will find it useful,,
Thanks for the comment ,appreciate it 👍
As others have stated, easy video to follow and well explained, extremely helpful to a novice like myself just starting out into rifle, and field target shooting thank you,
Thanks :) appreciate the comment , have fun in your new sport ,its addictive :)
Excellent video,, really well explained,, can not thank you enough,, it’s a brilliant scope,, but it can be a bit daunting to setup,,you are definitely the best on to follow,, 👏👏👍🤠
Thanks , appreciate that 🙂 . Yes can be a little daunting to start with, once you've done it a few times it doesn't take long to add a new profile 👍
@@cjoutdoors8264 yes but you make it so easy to follow,, thanks once again 👍🤠
Another great video, amazing content thanks
Thanks 🙂appreciate your comment👍
Thank you so much 👍🏼 easy vid to follow 🥳
Thanks for the comment 👍
Great video mate, helped me a lot straight to the point cheers. subscribed!
@@deanmurney1283 Thanks 🙂
And thanks for subscribing 👍 glad it was of help.
Your explanation helped me a lot! What is the effect of putting the distance on 50 meters or any other distance. I don’t understand this.
Another question: sometimes (to often) when ranging a distance it shows ranging error in the scope. Do you have an explanation?
Hi, thanks. The 50 meters or any distance will show holdover in reticle section , think this is more to do with glass scope , range error sometimes with an obstical too close or ranging beyond your ballistic tables furthest distance and sometimes just not recived properly, poor alingment from surface!
Check out the DNT app
Thanks again! Will look at DNT
Just to say that I've watched your videos on this scope and they are very helpful. However I seem to be struggling to get the ballistic data sent via bluetooth to the scope. Ive set up a profile for my AA S510, addad the JSB Exact Diablo 177 data, saved it ect, but when I bluetooth it over my phone screen shows the spinner, the scope says Synchronize Ballistic Tabe data but I never get successful confirmation. Then when I use the scope I don't get the holdover marker but do get a screen that says Local Device without ballistic table. Frankly struggling to find any help but your vids have helped me get this far so thanks.
Hi, make sure bluetooth on phone up to date , phone location is on , scope and app have latest version, Reboot your phone, If that's all ok you may have to try uninstalling app and then reinstall ,keep a note of your ballistic info you inputted .
If that doesn't work email Arken ,contact info is in the app, tell them your problem , tell them what phone you have and the operating system/version it running .
Iv contacted them in the past and they do reply ,there helpful. hope you get it sorted 👍
In your parameters settings at 5:56 in the video you show FFP and have it checked, what does it stand for, I was thinking First Focal Plane ? should it be checked or not, or what's it stand for, or is that supposed to be FPS?
Hi, you are correct First Focal Plane , I dont think it matters in the app ,the app can also be used for glass scopes , so that's why the option is there. The zulus reticle is FFP.
@@cjoutdoors8264 Thanks so very much, 👍👍
Thanks for all the great videos! Does the Zulus rangefinder have the incline angle taken into calculation of ballistics? Thanks again.
Thanks 🙂 , yes it it does calculate incline 👍
Great Video 💯 '' Many Thanks for Sharing 💥💥💥💥💥💥💥
Thanks 🙂 glad you like it 👍
Is the ballistic app only zulu specific?? Or can i use it for other scopes?? Pry a dumb question but im gunna ask it anyway
@@tylerwolfley2689 Hi , yes, as far as I know Arken zulus specific . You would be able to use the ballistic table for glass scope, using mill dots or MOA
Jsb 5.52 19gr fps 910.how much ballictics coefficient
Hi mate 8m zerod at 25y when 8m shooting at 60 im slightly high do i decrease the bc or increase
Hi, if pellet hits above target raise BC 👍
Hi mate can you advise me how to connect Bluetooth im having problems connecting, regards Keith
Hi, make sure phone has latest update same with scope and app. Bluetooth switched on in scope menu, You need to have Location turned on in your phone, go to your phone Bluetooth connections see if zulus is there ,if it is select it .
don't know what else to try ,if your still having problems send Arken a message ,
I had a problem on one App update, Bluetooth wouldn't connect Arken sorted it for me, there very good with there customers
Thanks for reply, the manual says connect Bluetooth on device and ranging button , not sure what they mean by ranging button mate ?
@@keithcruickshank5984 no idea why it says ranging button, all I need to do is have scope on, Bluetooth on in scope menu, open app and it connects, if it doesn't connect I go into phone bluetooth and selected zulus, after that it picks up the connection whenever I open app
Excellent vid but volume very low.
Hi, thanks for the comment , will have a try at bumping volume up .
@@cjoutdoors8264 yes , great video but bump the volume up please and show one how to use in the scope an settings that show the yardage info when you range something. In the manual it isn't very clear, or what sections you should be setting it to. Great info thanks so much, 👍👍👍👍
Tôi gặp khó khăn về cài thông số.bạn có thể hỗ trợ tôi không
Hi ,what are you having difficulty with
@@cjoutdoors8264 mycelium has a ballistics coefficient