actually worked. before i was getting about 2 bbs before needing to recharge. i really thought it was the mag itself and was thinking of buying a new one so you saved me some money too
Thankyou for your video i was only getting 4 bbs out before i had to recharge, turns out i must have had air because the "hold open valve and purge with Green gas" method has fixed it completely 👍
I've tried purging both of my SSP2(hi capa ) mags and it didnt seem to work on them! I have a WE extended mag and the gun seems to work normal. Is there anything else to be done?
I'm sorry to hear about your gas mag woes. It can be infuriating tracking down the problem. The most obvious problem could be a very slight leak on the mags. I say this as it works fine with the other mag. To check this out there are a few options but in my case if I suspect a leak I would normally strip the mag and check all o rings. These can go dry. If they are still intact a bit of silicone grease can restore them and seal the mag up again. Hope this helps.
Had an issue with a M&Pc mag. Was leaking from the fill valve, used silicon oil took a few try’s and drops of oil to stop it. The gun was brand new as was the mag, was using Abby green gas. I’m in Scotland too, and I was wondering if the temperature is effecting the gas. I just don’t feel I get that many shots out of a mag, is it how I’m filling it? Is there enough gas in there how can I tell? And I’m wanting to get more mags for it and holsters, but it looks like the Compact versions don’t have many holsters available (haven’t found any.) Is there any “universal” type of holsters, that could take various sized guns?
I've had that many times. Gas mags can be temperamental. If silicon oil doesn't work you can try silicone grease which sometimes does the job. Vorsk and nuprol gas mags are particularly bad for leaking when they are brand new but I've had I with other brands to. As to how long the gas lasts it is usually temperature related, especially for us here in Scotland. All you can do to check they are purged is follow the method in this video and you should be full. You could always try higher pressure gas as well, such as black or red. Holsters wise there are a number of universal holsters such as viper if your looking for non rigid. There are also retention holsters that are adjustable and these can be found at Bullseye, Landwarrior and patrol base to name a few. Deadly customs make kydex options, bit more expensive but we'll worth it. Hope this helps.
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
U are literally the best ever how to do/fix RUclipsr I’ve ever seen bro thanks u just saved me 30-60 dollars for new mags🙏🙏😊😊
Thanks a lot mate. I appreciate it. Glad the video helped out.
actually worked. before i was getting about 2 bbs before needing to recharge. i really thought it was the mag itself and was thinking of buying a new one so you saved me some money too
I'm glad the video helped out.
Yo you actually just saved me 50 bucks from buying a new 1911 mag lmao, appreciate your work man thank you
I'm glad the video helped.
Worked for my Canik TP9 mags! Thanks for the information!
Glad to hear it worked for you.
Damn man you saved me 😅. Just bought my first GBB pistol and thought it was buggered, but that was all it needed. Thanks a ton bro! New sub for sure!
Hi, thanks mate, I'm glad it helped.
Thankyou for your video i was only getting 4 bbs out before i had to recharge, turns out i must have had air because the "hold open valve and purge with Green gas" method has fixed it completely 👍
That's great. I'm glad the video helped.
I holdid up the valve like 2 second and filled it up with green gas. Is 2 seconds enough for holding it?
Thank you so much!!!
No worries, glad the video helped
Thank you, this worked
Great video buddy hope your feeling better 👍
Thanks mate, glad you enjoyed it. Getting there. Hopefully back in the field in a couple of weeks.
I've tried purging both of my SSP2(hi capa ) mags and it didnt seem to work on them! I have a WE extended mag and the gun seems to work normal. Is there anything else to be done?
I'm sorry to hear about your gas mag woes. It can be infuriating tracking down the problem. The most obvious problem could be a very slight leak on the mags. I say this as it works fine with the other mag. To check this out there are a few options but in my case if I suspect a leak I would normally strip the mag and check all o rings. These can go dry. If they are still intact a bit of silicone grease can restore them and seal the mag up again.
Hope this helps.
@@rockbottomairsoft cheers man! I will give it a try! :)
THANK YOU
Glad it helped
Thanks man
No problem, hope it helped.
Had an issue with a M&Pc mag.
Was leaking from the fill valve, used silicon oil took a few try’s and drops of oil to stop it.
The gun was brand new as was the mag, was using Abby green gas.
I’m in Scotland too, and I was wondering if the temperature is effecting the gas.
I just don’t feel I get that many shots out of a mag, is it how I’m filling it?
Is there enough gas in there how can I tell?
And I’m wanting to get more mags for it and holsters, but it looks like the Compact versions don’t have many holsters available (haven’t found any.)
Is there any “universal” type of holsters, that could take various sized guns?
I've had that many times. Gas mags can be temperamental. If silicon oil doesn't work you can try silicone grease which sometimes does the job. Vorsk and nuprol gas mags are particularly bad for leaking when they are brand new but I've had I with other brands to. As to how long the gas lasts it is usually temperature related, especially for us here in Scotland. All you can do to check they are purged is follow the method in this video and you should be full. You could always try higher pressure gas as well, such as black or red.
Holsters wise there are a number of universal holsters such as viper if your looking for non rigid. There are also retention holsters that are adjustable and these can be found at Bullseye, Landwarrior and patrol base to name a few. Deadly customs make kydex options, bit more expensive but we'll worth it.
Hope this helps.
Eerr bubbles are annoying
Hahaha, that they are