High-Precision Engraving and Cutting--AlgoLaser Alpha 22W discovering
HTML-код
- Опубликовано: 2 окт 2024
- Welcome to the Laser Channel- Learn, Create, and Share!
Checkout the Algo Alpha 22 watt laser machine!
In this video I'll run a demanding engraving of a photo to test the controller board speed/ power and the speed of the machine- engraving at 400 mm/s (24,000 mm/m)! I'll also attempt cutting 3/4 inch solid pine and 10 mm black acrylic in a single pass! As a bonus I'll try color marking some stainless steel!
The Alpha 22 features 2nd Generation laser beam combining technology called COS that makes for faster and deep cutting while maintaining fast and detailed engraving!
This machine also goes 400 mm/s (24,000 mm/m)- that's crazy fast!
The Alpha 22 also include a number of safety features like a lockable key switch, tilt safety, beam problem detection, and more!
For a limited time only at Gear Berry:
Algolaser Alpha: $749
Algolaser Delta: $949
Other benefits:
Wheel of Fortune Drawing for free gifts: 100% Winning! Save Up to $399!
50% OFF Flash Sale for Algolaser DIY Kit and Two tress laser engraver
11.11 Super Sale Max 50% Off + Save Extra $40 With Coupon! Only $249 to get the Algolaser DIT Kit
Buy More, Save More: Up to 20% Off Accessories!
Buy Fafrees E-bike, get free chain lock and e-bike bag
Join the lucky draw here:
www.gearberry....
Product links (bookmark for future use):
www.gearberry....
www.gearberry....
Special Promotion from Manufacture:
TOP 10 Orders: Get a wonderful gift totally worth $139.99: one-year LightBurn free license & one 400*400mm Honeycomb Panel
11th-300th Orders: Get one 400*400mm Honeycomb Panel worth $79.99
Would you like to see more project videos? Let me know what you would like to see by leaving a comment below!
Stay up to date by checking out our Facebook page: @TheLaserChannel
Which laser do you think is better? Athomstack x20 or this one
t really depends on your projects- but the AlgoLaser is newer technology. The Algolaser runs a lot faster and the frame is more rigid which is good. Both brands offer great machines, but now that I'm reading what I typed the Algo sounds like the way to go! Best wishes!
@@thelaserchannel1 thanks
one more question, which one is better for cutting thicker things thanks
@@tomaszpralat344 They are both about the same power output. The AlgoLaser has updated laser beam combing tech while the AtomStack has the air assist pump that flows more air... both are need for deep cutting. There's always the option to use a higher flowing air pump on the AlgoLaser but you'll loose the Lightburn controlled air ON/OFF. Overall though the depth of cut will be a little deeper and cleaner with the AlgoLaser with an after market air pump. The next noticeable performance increase comes at 36 watt laser module and at 48 watts it's crazy awesome with a slightly higher price to match.
I was about to make the jump with an xTool D1 Pro, but the Algo has me rethinking that. Do you plan to do a comparison video of these two lasers?
Yes- I have plans for a comparison between the Xtool D1 (non pro) and AlgoLaser. Having ran both I can see the controller board on the Algo is much better by a huge amount! The laser modules are different powers- but again the AlgoLaser is just more refined. Thanks for watching!
@@thelaserchannel1 Great--looking forward to it!
GREAT - NO BS VIDEO....
I'm compiling a notepad - full of YT video links and this one is there to watch just before my Alpha arrives next week. As a first time buyer I did my homework, and from what I've learned, the Alpha is my winner. Since any laser cutter will spend most/ALL the time under a smoke hood, it seemed senseless to buy the Delta = MO MONEY, with it's display screen out of reach under the smoke cover. Only a handful of mm difference in build area, So, it was an easy decision to just buy the Alpha.... AND, with the advanced laser beam collimation, the 20-22 watts cut effectively as a "standard" 28-30 watt laser.... So there.............
Hi, I purchased this machine but when I power it on and the laser tries to go back to the home position it gets there but makes a loud noise and the power button blinks yellow..any idea? Algo hasn't gotten back to me and it's been 3 days
Sorry to hear you're having issues- I wonder if one of the homing switches are not being met. Two things to try- manually (by hand) activate the homing switches before the laser reaches them- the controller will look for the x,y switches to be met and then met again. The other thing to try is to put the machine from "Absolute Coordinates) to "Current Position). Best wishes!
Hi
Can it cut 3mm acrylic in other colours?
Laser diode cut black the best- other colors can be cut but will take more power, more passes, and slower speeds or a combination of power, passes, and speed. The darker the color the easier cutting will be. Blue, white, and semi clear acrylics do not cut with a laser diode. Many retailers offer a sampler pack and I recommend this a starting point for engraving and cutting acrylic. Thanks for watching!
Thanks so much for the fast reply! :)
Great review thank you!
You're welcome and thanks for watching!