GIVEAWAY WINNERS ARE: @TeleVision-dx3vw (Pathfinder) and @lazydracula (Q1)!! CONGRATS!! Make sure you email me here 👉chad dot landman at gmail dot com!
Thanks for the video! I'll have to check some of these out. I do carry the Fenix E-Spark in my wallet daily as an emergency backup light source/phone battery. Gets me 12-15% on my Samsung.
You earned a new subscriber! I love tiny tools and I was actually looking for a replacement for my small lockpicking kit I lost. It was identical tool wise to the one you showed so I ended up purchasing it. It also appears to be a higher quality than the ones I was looking at. Thank you!
I am definitely going to check out Soulbound Leather. I've been looking for a traditional pocket knife slip with a pocket clip. Thank you for the video.
Thank you for your awesome video. You definitely got me hooked on these wonderful mini tools. Already started looking for them and will get some next pay day
I am new to the EDC world and made my first Altoids kit recently and became addicted afterwards. I've always loved gadgets, especially innovative ones.
I really like tiny tools, but have a hard time justifying buying new ones as they overlap so much with other things. I'm still on the lookout for a good uk legal folding knife (not a multitool) if you have any suggestions.
@@LandmanEDC No problem. Looks like a good channel for me and I subscribed. I just got into EDC a few months ago starting with multi-tools and then flashlights. I'm now looking at pouches to organize it all.
Another great video, I love the small EDC tools. I am always looking for new ways to make EDC practical and light weight. As a professional first responder I carry the swiss style lock pick set. Its been useful in accessing pad locks on fencing when doing area searches during emergencies. There is a learning curve on mastering the device.
I really want to buy on of these ant design pry bars , great little tool , but its really hard to get one where i live.Great video , you earned +1 sub.
What you were calling a scraper on the next tool is actually an old style can opener...similar in concept to the P-38 can opener that was included in every GI ration.
Good Stuff!! I am putting together an EDC, but for when I go to work on a military base. So, no guns or knives aloud. I could use some suggestions, especially with cutting things.
A good hard-use cutter is the Milwaukee 1505 Utility Knife: amzn.to/3xAG3Jx Don’t know if you could carry that one on base, but I’d highly recommend the Pathfinder V2 from Ant Design from the video here as a small cutting tool.
So normally I’d agree, but the tool is just so small it’s not really easy to fidget with. The lanyard release also requires two fingers, one on each side to release it. Which is good for stability and it not falling off, but bad for fidget factor. But thanks for watching and for your comment!
I have one of those keychain quick release things from a random Amazon brand in Titanium and its legitimately so useful, it adds a little bulk to my keychain but I use one for my keychain flashlight and the other for my car key so I don't mess up my car's ignition. Tried pineapple on pizza and it's ok, I wouldn't say it "belongs on pizza" but it's not terrible. Love what you do, keep the work up and you'll make it big. ❤
Great video, sir! Tiny tools are my favorite EDC videos I follow Ant Design for a while now. Pretty innovative in a very tight market. Also, about the Nextool piece, it's very easy to take out the knife of it, if you're (like me) from a place where you better stay away from carrying a knife altogether. I use to EDC it for a while
@@LandmanEDC The problem with Nextool and Chinese multi tools in general is the poor quality control. Mine had very poor scissors, which is why I quit carrying it.
I was kind of groovin' on that NexTool....but the link takes you to a very different product (no scissors, no pliers etc....) and I couldnt find the one you reviewed on their site.
If you like the Rough Ryder knife tool, you might like the A G Russell Steel Thumbnail. I've carried one on my keychain for years. Sandvik is a Swedish company that makes all sorts of mining and industrial gear. They also make steel. 14c28n is a steel they made as an exclusive for Kershaw originally. The formula started off as a razor blade steel - 13C26. Kershaw's blend increased the corrosion resistance and it's super tough. The carbides in it are very small. It doesn't keep an edge for that long, but it strops back easily, as you might guess from a razor blade steel. And it takes a really sharp edge because of those small carbides (again - as you might expect in a razor steel). My favorite sandwich is San Mai. ;-)
Just saw your channel. Enjoyed the video. I like quality mini tools in order to reduce the weight of the things that I carry. Currently, my favorite is the Gerber Dime. My newest is a Foruly magnetic bit driver, made of 304 stainless steel, that attaches to several Leatherman models, using the tapered and beefy phillips post. Its solid, but costly at $29.99. Maybe you're aware of a less expensive model.
For some reason, bit drivers tend to be on the expensive side. And the cheap ones you don't want to use at all. Don't know of another better or cheaper one, but I'll come back if I find one!
Great video! That Ant Design E-One is really cool. Also, I'm one of the people who does not like pineapple on pizza but I respect your decision to like strange foods.
Sandvik is the Swedish company who made the steel. Like you see Böhler N690 made by Böhler or CPM Magnacut made by Crucible Powder Metalurgy. Sandvik also makes 14C28N and 13C26.
@@LandmanEDC no worries! Btw, feel free to promote your videos on my subreddit r/UtilityPouches, if it's one about a pouch! This was a good video, you should have more subscribers.
Great video! Sandvik is a Swedish steel manufacturer (among other things). The 12c27 was developed by them in the 1970´s and is widley used among knives ...and btw, I can eat pineapple on pizza but I prefer not to.
Sandvik is a Swedish steel. Its the steel mora uses. It's much better steel then swiss army knife. 12/27 was a razor blade steal. Then kershaw asked for a better steel so they made 14c28n which is a great budget steel.
Nice items I like the battery pack and prybar. Oh yeh and pinapple on pizza with anchovies. Do you prefer the wrench prybar or the E1 prybar? And why? Do you have a discount code for the ant design website?
Pineapple can definitely go on pizza - the caramelization from the oven heightens the sweetness and dries out the watery-ness. It's a great foil for any of the savory/salty toppings.
In a Ruike pocket knife, try holding it upside down and pressing the scissors with your thumb rather than squeezing it in your hand. They will cut better. 😊
SANDVIK STEEL IS CONCIDERED ONE OF THE BEST STEELS FOR KNIFE MAKING. IT'S 12C27, 13C26, & 14C28N 61HRC. Examples like Morakniv knives. Swedish iron ore has a long history, read up on WWII.
hahaha I just woke up ohhh and on the next tool you have a bottle & a CAN opener(which I guess one could use as a scraper 😊), not a bigger bottle opener
Sandvik is an engineering company from Sweden who work on heavy machinery and high quality tool steel. Swedish iron is world renowned and so is Sandvik, so whenever you see that name you know it’s both Swedish Iron made steel and Sandvik’s engineering of that steel.
![KSI - Thick Of It (feat. Trippie Redd) [Official Music Video]](http://i.ytimg.com/vi/At8v_Yc044Y/mqdefault.jpg)
GIVEAWAY WINNERS ARE: @TeleVision-dx3vw (Pathfinder) and @lazydracula (Q1)!! CONGRATS!! Make sure you email me here 👉chad dot landman at gmail dot com!
Thanks for the video! I'll have to check some of these out. I do carry the Fenix E-Spark in my wallet daily as an emergency backup light source/phone battery. Gets me 12-15% on my Samsung.
Sometimes all you need is that 10% to get you where you need to go. Thanks for you comment and for watching the video!
You earned a new subscriber! I love tiny tools and I was actually looking for a replacement for my small lockpicking kit I lost. It was identical tool wise to the one you showed so I ended up purchasing it. It also appears to be a higher quality than the ones I was looking at. Thank you!
Awesome! Thank you!
That wrench and the pry bar with the bits are really cool. Got me trying to figure out how to fit them into my edc
The wrench as a small pocket clip that comes in handy. It's not deep carry, it will stick out a bit, but it's really neat they incorporated that.
I am definitely going to check out Soulbound Leather. I've been looking for a traditional pocket knife slip with a pocket clip. Thank you for the video.
I hope they’re at Blade Show again this year, I have a few knives I want to see if I can try out in their slips
Let me know what you think! And if you watched to the end of the video, you can comment below to enter the giveaway…
always looking for ways to tweak and improve my carry, thanks
Glad to help
Thank you for your awesome video. You definitely got me hooked on these wonderful mini tools. Already started looking for them and will get some next pay day
Appreciate you watching!
Brilliant functional designs. Great reviews. Thanks.
Glad to help!
I am new to the EDC world and made my first Altoids kit recently and became addicted afterwards. I've always loved gadgets, especially innovative ones.
Welcome to the hobby! Thanks for watching! Check out my Altoids tin video here: ruclips.net/video/7-J63t49Eaw/видео.htmlsi=abmwvm9-SwYIFgJt
I really like tiny tools, but have a hard time justifying buying new ones as they overlap so much with other things. I'm still on the lookout for a good uk legal folding knife (not a multitool) if you have any suggestions.
My last video actually has a really good UK legal knife called to the V3 from Hoo Knives: ruclips.net/video/EXyKS7MMdzw/видео.htmlsi=wE3hJL1CzN5PBu19
Love the ant design tools ,got the pry bar/ driver hybrid for a buddy for Christmas.
Good choice!
Love what Ant design are doing. Thanks for the video
You bet. Thanks for watching!
What was the small knife in the case
I love your work.i jist came baco from christurch nee zealand after visitng my grandparents it was fun we went to a driving range!
Nice, thank you for watching!
Great video and cool tools. I'll check out some of your other videos.
Hey I appreciate that, thanks for watching!
@@LandmanEDC No problem. Looks like a good channel for me and I subscribed. I just got into EDC a few months ago starting with multi-tools and then flashlights. I'm now looking at pouches to organize it all.
Very cool video! congrats on the great work! keep it up!
Thank you so much!
Another great video, I love the small EDC tools. I am always looking for new ways to make EDC practical and light weight. As a professional first responder I carry the swiss style lock pick set. Its been useful in accessing pad locks on fencing when doing area searches during emergencies. There is a learning curve on mastering the device.
Right on man. Thanks for your service as a first responder and thank you for watching!
Some great small tools right there!!!
Appreciate you watching!
Unique tools. I like that they are a little different than most carry items.
Lots of variety here. Appreciate you watching!
That 8 Fold wrench was the coolest tool.
It’s very versatile - I was skeptical but it actually comes in handy quite a bit!
I really want to buy on of these ant design pry bars , great little tool , but its really hard to get one where i live.Great video , you earned +1 sub.
Thank you, much appreciated!
Awesome video I’m gonna be checking out the pocket sheath! And also you can’t beat a good pb&j!
You got that right!
Really like the small tools and am really interested in the Ruike and the lock pick tool.
Hey thanks for watching!
What you were calling a scraper on the next tool is actually an old style can opener...similar in concept to the P-38 can opener that was included in every GI ration.
Ah yes!
I enjoy your videos and appreciate the straightforward reviews
Hey thanks very much!
First time on the channel and definitely sticking around for more hahaha clicked on it exactly because of Ant Design's tools. Great video!
Thank you so much!
Good Stuff!! I am putting together an EDC, but for when I go to work on a military base. So, no guns or knives aloud. I could use some suggestions, especially with cutting things.
A good hard-use cutter is the Milwaukee 1505 Utility Knife: amzn.to/3xAG3Jx
Don’t know if you could carry that one on base, but I’d highly recommend the Pathfinder V2 from Ant Design from the video here as a small cutting tool.
Love the lanyard release design in the V2 Beta! I can see that becoming a fun thing to fidget with.
So normally I’d agree, but the tool is just so small it’s not really easy to fidget with. The lanyard release also requires two fingers, one on each side to release it. Which is good for stability and it not falling off, but bad for fidget factor. But thanks for watching and for your comment!
Great episode. Some new toys to examine for my EDC pouch!
Glad it was helpful! Thanks for your comment.
Going to be checking out 8fold even though I have EDC and full -sized tools.
Nice video!
Appreciate that!
I have one of those keychain quick release things from a random Amazon brand in Titanium and its legitimately so useful, it adds a little bulk to my keychain but I use one for my keychain flashlight and the other for my car key so I don't mess up my car's ignition.
Tried pineapple on pizza and it's ok, I wouldn't say it "belongs on pizza" but it's not terrible. Love what you do, keep the work up and you'll make it big. ❤
Man I appreciate your comment! I feel the same way about pineapple on pizza - don’t love it but don’t hate it either. Thanks for watching brother!
The B Pathfinder seems like the best of the two overall. Thanks for taking the time to show us these options.
Absolutely, thank you for watching!
Really nice video, with a lot of nice lil tools, I like the quick release nature of the one pathfinder Variety.
Thank you for watching!
I’d love one of your giveaways. Thank you for offering.
Absolutely, hope you win! We’ll draw next week.
Great video, sir! Tiny tools are my favorite EDC videos
I follow Ant Design for a while now. Pretty innovative in a very tight market.
Also, about the Nextool piece, it's very easy to take out the knife of it, if you're (like me) from a place where you better stay away from carrying a knife altogether. I use to EDC it for a while
Cool! Yeah I’m actually carrying the NexTool today, no knife with me. It’s quite versatile!
@@LandmanEDC
The problem with Nextool and Chinese multi tools in general is the poor quality control. Mine had very poor scissors, which is why I quit carrying it.
@@ELaster1 You’re not wrong. That stuff is very hit-and-miss.
I was kind of groovin' on that NexTool....but the link takes you to a very different product (no scissors, no pliers etc....) and I couldnt find the one you reviewed on their site.
Neither could I. And it hasn’t been that long - I’ve emailed the site runner and I’ll get back to you.
Really enjoying your content. Also really liked that 8fold wrench. But wouldn’t mind winning one of the ant design tools. Keep up the great work.
Tell you what brother, if you win, I’ll send the wrench. I’m going to draw next Thursday!
I don’t have anything like the one that you are pointing at; one with a wrench. Thinking about trying something like that.
It’s really useful, I’d highly recommend it!
Great video, always alike when a diverse array of companies are featured around a common theme. Also... yes to pineapple on pizza.
Appreciate you watching!
very good content, greetings from Argentina
Greetings! Thanks for watching!
In case you didn’t know, that first tool you pulled out from the Nextool was a combination can opener and bottle opener (the bottom one).
Nice thanks for the heads up
If you like the Rough Ryder knife tool, you might like the A G Russell Steel Thumbnail. I've carried one on my keychain for years. Sandvik is a Swedish company that makes all sorts of mining and industrial gear. They also make steel. 14c28n is a steel they made as an exclusive for Kershaw originally. The formula started off as a razor blade steel - 13C26. Kershaw's blend increased the corrosion resistance and it's super tough. The carbides in it are very small. It doesn't keep an edge for that long, but it strops back easily, as you might guess from a razor blade steel. And it takes a really sharp edge because of those small carbides (again - as you might expect in a razor steel). My favorite sandwich is San Mai. ;-)
Good info - and a good sandwich!! Thanks!
Just saw your channel. Enjoyed the video. I like quality mini tools in order to reduce the weight of the things that I carry.
Currently, my favorite is the Gerber Dime.
My newest is a Foruly magnetic bit driver, made of 304 stainless steel, that attaches to several Leatherman models, using the tapered and beefy phillips post. Its solid, but costly at $29.99. Maybe you're aware of a less expensive model.
For some reason, bit drivers tend to be on the expensive side. And the cheap ones you don't want to use at all. Don't know of another better or cheaper one, but I'll come back if I find one!
I have the nextool mini flagship. It’s a nice little multi tool
It is, it’s actually been my daily carry since I got it. Very useful
My favorite is the 8fold titanium wrench.
Thanks for watching!
Sweet gear!! I love all the titanium!! great video man!! I love pb&j's 😆
Thanks! 👍
Great video! That Ant Design E-One is really cool. Also, I'm one of the people who does not like pineapple on pizza but I respect your decision to like strange foods.
So actually not a fan of pineapple on pizza. Don’t hate it, but don’t love it either. Appreciate you being considerate though! Thanks for watching!
I watched the whole video - interesting stuff!
Thanks for watching!
Hey great video. I had never seen some of these tools anywhere else. Thank you for the chance to win the giveaway.
Absolutely- thank you for watching!
I dig the little tools. Thanks for your content. And yes, pineapple on pizza is acceptable.
Thanks for watching!
Cool little tools. Excellent video!
Glad you like them! Thanks for watching.
Might add a couple of these to my viperade pouch.
Can’t go wrong with a cheesesteak and nice cold dr pepper
1. I need to get me a Viperade pouch, and 2. I think I’m getting a cheesesteak and Dr Pepper as soon as possible 😊😎
@@LandmanEDC I’ve got my 3rd one coming in soon lol, slowly narrowing down the best pocket/zipper orientation for myself
Thanks for what you are doing for the EDC community! Love your content. And no, pineapple does not belong on pizza, gross! Lol.
Thank you so much for your kind words!
Sandvik is the Swedish company who made the steel. Like you see Böhler N690 made by Böhler or CPM Magnacut made by Crucible Powder Metalurgy. Sandvik also makes 14C28N and 13C26.
Nice, thank you!
@@LandmanEDC no worries! Btw, feel free to promote your videos on my subreddit r/UtilityPouches, if it's one about a pouch! This was a good video, you should have more subscribers.
Cool tools. Thanks for the video
Appreciate it!
nice! thanks for opportunity.
Any time! Appreciate you watching
Regards from Brazil! I enjoy your videos a lot. o/
Glad you like them! Really appreciate your support.
Greate great video, I like small tools, those small pry bars look very interesting, o and pineapple shouldn't be on pizza jajaj
Yeah the Ant Design stuff is super neat. Thanks for watching!
Sandvik is a Swedish steel and tool manufacturer. Especially famous for their wood saws.
Very nice, thank you
Earth is NOT flat! I had pizza for lunch today and it was delicious! 😋
Haha nice thanks!
Those Ant design are cool.
They are!
Love AntDesign's quick releases. I have a bunch of them.
Any Design is doing some great stuff. Thanks for watching!
The scissors on the ruike i think you are using them upside-down
Thanks!
Great video! Sandvik is a Swedish steel manufacturer (among other things). The 12c27 was developed by them in the 1970´s and is widley used among knives ...and btw, I can eat pineapple on pizza but I prefer not to.
Thanks for the info on Sandvik! I'm with you on the pineapple, I don't want it but don't find it detestable either haha
took my upcoming explanation to a tee lol
love the tiny tools
Thanks for watching!
Question about Pathfinder, does it work with Topeak Ratchet?
Topeak ratchet bits?
My favorite sandwich is a Reuben and man, that Pathfinder would clock a lot of hours at my job.
It’s a perfect little cutting tool. Here’s hoping you win!
I like the key chain version.
Yeah I’ve been using that one every day!
I have the Rough Ryder knife opener.
It’s a nice little tool. Maybe not something everyone needs but it’s useful for me
Sandvik is a Swedish steel. Its the steel mora uses. It's much better steel then swiss army knife. 12/27 was a razor blade steal. Then kershaw asked for a better steel so they made 14c28n which is a great budget steel.
Nice! Thanks for the info!
pro pick, awesome tools!
Awesome stuff over there!
pineapple does not belong on pizza , great video as always brother , love those little bits ok kit , keep up the awesome work 🙏
Thanks brother 🤜🏼🤛🏼
Great vid, keep them coming 👍
More to come! Appreciate it!
Nice items I like the battery pack and prybar. Oh yeh and pinapple on pizza with anchovies. Do you prefer the wrench prybar or the E1 prybar? And why? Do you have a discount code for the ant design website?
I don’t have a discount code for Ant Design but I have inquired about that!
I prefer to use the 8Fold Wrench - just used it yesterday. The E-One is outstanding but the wrench is more ergonomic.
@@LandmanEDCcan you please let me know the length of the E1 prybar? website dont have that info
Loving the content keep up the good work!
Thanks, will do!
Great video definitely a few more holes burned into my wallet 😂
Yeahhh thanks for watching!
Awesome video! Thank you for the chance to win 😀
Entered!
Good content, the jobo is a real stretch for me but whatever floats your boat.
It might be a stretch. But I found it useful so I wanted to include it
@LandmanEDC no judgment here sir. Everyone is different
Liked the video. You have a new subscriber.
Thanks for your support!
You earned a new subscriber!
Appreciate that!
Giveaways are always great 👍🏻
Yeah they are, and I love doing them for all of you!
Cool finds!
Appreciate you watching!
Pineapple can definitely go on pizza - the caramelization from the oven heightens the sweetness and dries out the watery-ness. It's a great foil for any of the savory/salty toppings.
Man you make it sound so good!
Great video. I love tiny tools! Pineapple does not belong on pizza
I agree! Don’t hate pineapple, but not going out of my way to get it on pizza either
For the ant design alpha and beta pathfinder, do they use standard exacto blades?
Yes, they look exactly like Xacto blades - I don’t have an actual Xacto to check them on but they are almost exact. Thanks for your question!
In a Ruike pocket knife, try holding it upside down and pressing the scissors with your thumb rather than squeezing it in your hand. They will cut better. 😊
Great tip! Thank you!
Thanks for the review all these products look really useful,and yes I do like pineapple on pizza.God’s Speed.
Thanks!
tiny tools are the best tools because you can have them available
Yep you can stash them just about anywhere and have them ready to rock and roll!
SANDVIK STEEL IS CONCIDERED ONE OF THE BEST STEELS FOR KNIFE MAKING. IT'S 12C27, 13C26, & 14C28N 61HRC. Examples like Morakniv knives. Swedish iron ore has a long history, read up on WWII.
Thanks so much for all the info and thank you for watching!
Another great video take care
Thanks, you too!
I started reading the comments before the end of the video and was confused at all the pizza references, lol. I'll eat it either way!
I’m with you! If it’s pizza I’m eating it! 😆
You’re missing the most important part of a lock picking set, the tension wrench.
Yes, my inexperience is showing. But alas, I found it!
Today is my birthday. Nice vídeo
🎉 Happy Birthday! Thank you for watching!
Pineapple belongs in pizza, jokes aside can't think of a real case scenario where you need to open that many boxes to have a second knive lol
More knives is always the solution 😁
Cool list !
Thanks!
Awesome micros!!!
Thank you for watching!
Looking forward to the pathfinder sigma.
Nice
Great vid!
Thank you very much!
hahaha I just woke up
ohhh and on the next tool you have a bottle & a CAN opener(which I guess one could use as a scraper 😊), not a bigger bottle opener
Gotcha, appreciate it!
Pineapple is awesome on Pizza 😁
I don't like it, but I don't hate it either
Sandvik is an engineering company from Sweden who work on heavy machinery and high quality tool steel. Swedish iron is world renowned and so is Sandvik, so whenever you see that name you know it’s both Swedish Iron made steel and Sandvik’s engineering of that steel.
Thanks so much for all the info and thank you for watching!