Это видео недоступно.
Сожалеем об этом.
Micro Roni for Glock 19 after one year
HTML-код
- Опубликовано: 4 ноя 2017
- My update on Micro RONI from CAA after one year.
Micro Roni Gen 4: • Micro Roni gen 4 for G...
If you have any questions, please feel free to ask.
DISCLAIMER: My videos are strictly for documentary, educational, and entertainment purposes only. Imitation or the use of any acts depicted in these videos is solely AT YOUR OWN RISK. All work on firearms should be carried out by a licensed individual and all Country, state and federal rules apply to such. I (including RUclips) will not be held liable for any injury to yourself or damage to your firearms resulting from attempting anything shown in any of my videos. I do not endorse any specific product and this video is not an attempt to sell you a good or service. I DO NOT sell or deal in firearms. Such a practice is heavily regulated and subject to applicable laws. I DO NOT sell parts, magazines, or firearms. These videos are free to watch and if anyone attempts to charge for this video notify me immediately. By viewing or flagging this video you are acknowledging the above.
adding a sling and suppressor to your setup (using the suppressor capable version) would make it the ideal home defense weapon. nice video! I also have the same optic
right rifle level accuracy without worrying about my round going through the bad guy through the wall and through the old lady next door lol ill take it :D)
Rather use a bayonet as well
To clear up some things. You can get them with out a stock or with an arm brace and without a vertical grip, then you dont need a 200 dollar tax stamp. It is illegal to have a vertical foregrip or stock unless you have a tax stamp and have done the proper ATF paper work. Because of the wait time for ATF background checks and the $200 stamp id go with a arm brace and no foregrip.
if it is longer than 26 inches then it is a AOW and can have a vertical grip and still be a pistol.
You do not need to apply for the tax stamp before purchasing the Roni PDW (the model you have). The tax stamp will only be necessary if you plan on mating the pistol with the Roni PDW. So, I have a Glock 17 Talo Edition. I can buy the Roni PDW for $250 from an internet site, which is the only way, since gun shops in my area are only able to order the Roni with the arm brace, and the Roni PDW will be shipped directly to my door.
I can confirm the Micro Roni is legal and a non regulated item in both France and Argentina.
In germany its free to buy even without a permission cause not a part of the gun
And it doenst change the pistol to a sbr or whatever
You don't need an NFA tax stamp unless you have a stock. If it's the SIG pistol brace, it's legal with no additional paperwork.
Progressional also the vertical fore grip. If it didnt have a fore grip and had a brace or nothing back there then it wouldnt require a tax stamp.
In US, the land of free, it is restricted. In Sweden it is license-free.
What about the fore grip? Would it be legal because it’s not a true 90° ?
Well... in my country gun law is really restricted so micro roni is nice alternative
If you have the velcro stock it is NOT an SBR. You do not need a tax stamp for this stabilizer unless you remove the velcro or buy the nfa stock.
if you replace the stock with the stabilizer would it still need a tax stamp because of the vert fore grip ? Or you won’t because it’s not a 90° VFG ?
''Pimp Up Your Glock''
That is a better name for the product.
lol
What type of problem CAA did you have ? What the HellCat MCK? did you have the cocking handle lifting up off the slide ??? i reported it and never got a fix for the problem
Awesome....very nice setup...good review
i have this one, the new MCKs not looking the part for me, too toyish, Ronis are better, its better to leave your glock stock, if you customize it (except for the trigger obvioslly) you may have problems with the roni.
Did point of impact change if You will squeeze really hard roni but pistol ever harder on one side? Roni not gonna twist but glock can just a bit, but on 25 m can that be something to be awere.
HELLOO from Peru...I have exactly the same Micro Roni, you think that if a cut with a dremel the side where it`s the slide retainer, can used with a glock 19X?...I hope you can help me or somebody. I would appreciate it
Good looking project
Your front sight is backwards
Everett Thoman true
In Soviet Russia, front sight backwards you.
Your front site is backwards lol
Nooo it’s aerodynamically tactical
This is Gen 1? Can you remove the shroud and fix a surpressor?
Switch for automatic shoting..?? 😊
Great acoustics at that range man, sounds like you are using that artillery on them!
Your gun is so clean
Nice review. Do you think you could get a little better accuracy if you shot a bit slower? Greetings from Czech rep.
Absolutely you could get better accuracy! The best i can personally do is a 3 cm group of 5 shoots if i take my time, while my friend for instance can do even better. Long story short accuracy is in the shooter, not the weapon.
On the one that failed, did the spring alone just fail, or did the entire plastic locking bar crack/break? I have had an issue with option #2 (locking bar breaking), but I am also using a Glock22 in the chassis, which is the snappier recoiling .40S&W of course...
No it didn't break just the spring failed, it's still usable if i hold it extremely tight and use less powerful ammo but annoying as hell the newer version has no problems
Spasibo za vidos, ochen polezno
Front sight on backwards
Maybe because of the gas block?.. I don't see any issue with backward mounting a front sight, it would still do the job.
Mine still doesn't hold zero if you take it out
Wrong !!! Does not need a tax stamp, it's not considered a SBR since it's does not have a stock or a barrel longer then 10 inches, nor a vertical forgrip to it, but does have an arm brace. This does not qualify it as SBR. Please stop putting out misinformation...
Can you buy new charging handles. The one I have is worn and doesn't lock onto the slide anymore.
I'm sure you can just contact the manufacturer or the store you bought it at
pretty sure your Front Sight is backwards dude
Doesn't seem like it.
Why not just buy a 16" glock barrel for like $200? Wouldn;t that eliminate the need for the tax stamp?
If you're going to do that, you're just rolling with a carbine and eliminating the compact nature of it. There's a whole lot of great options for carbines that aren't pistol calibers. Get an AR.
Best option is with the brace. ATF ruled you can shoulder it without spending 5 to 10 in the slammer, so go for it.
Keep Calm and Call for Fire I have an AR that's 20", and a 16" AK. I wouldn't mind having a handy compact gun that converts my pistol into a carbine. Cheaper and funner to shoot, while having the option to go to a smaller barrel in the future. There's many benefits to having a pistol caliber carbine, especially one as small and light as this.
How much it cost
Can you use this roni with a glock19 fto ???
mac roni
Thank you for your clarifying video. I am waiting to arrive my gen 4 micro roni fo rGlock 19 5 gen, hope arrive soon. I already bought sights from Macpul and Holosun red dot. I would like to ask you, what do you think about buying a muzzle extension devica?Best regards, Calogero
Just curious about the red dot, the guy at Sportsman Warehouse told me that putting a red dot on it is illegal unless it's a pistol kind of red dot??? You know anything about that??? I feel like he doesn't know what he's talking about!!!
What is that silver attachment on the right side rail when you're in the range?
that's a gopro mount =)
Is the magazine well in front just a slot for the fresh magazine?
Dalton Foreback yep. Spare mag holder.
if you do a mag burn of 90 rounds as fast as possible, will the glock frame warp?
Nope
Will a polymer 80 work?
How much your Micro Roni please
Does it scratch your gun? Thank you.
no, it just makes it more dirty
Good video 👍
Is there a micro roni made for a desert eagle?
not yet
Why does the top one has an ar 15 carry handle???
I don't remember anymore probably i didn't have sights for it and was just using it for sights
Oh ok
Imi kidon Is BY FAR better sbr option
"Eats ammo like cupcakes"...had to back it up just to hear that line again...lmfao!!!! oops!! this is NOT an NFA firearm...it is NOT a short barreled rifle...it's not even a firearm until you put the pistol in it...so that is incorrect.
What do you mean? Sure, without the glock it’s not an sbr or firearm but it does turn your glock into an sbr since this is the folding stock version. Only the stabilizer version avoids the reclassification when inserting the glock.
@@genegene8686 It's still a pistol with an armbrace..you know SBR doesn't stand for short barrel pistol.
@@Jonathan_Knight He clearly is using the SBR version, there’s a folding stock not a brace, which you can see as he’s rotating the Roni. A pistol arm brace requires your arm to nominally be able to be, ya know, braced, which you can’t do here.
@@Jonathan_Knight But don’t take my word for it, the manufacturer and inventor even explains there are two different versions of the roni at 1:30 ruclips.net/video/VyGnsLO6rDY/видео.html
Jeez thats a lot of plastic
sLOVEnc how can I contact you by email?
Why do you want to contact me ?
I'm the marketing manager of a worldwide distributor of tactical equipment, such as the micro roni, I want to talk about product reviews.
This reminds me of a honda civic with all that plastic bull$hit that makes it look fast, but really makes it no better than stock. With the $ you spent on those extras you could have purchased a more accurate/reliable weapon (Sig/H&K). ..To each their own, waste your $ anyway you want.
Different license. Very important (outside of US).
Agreed you would be better off just buying a keltec sub 2000 and accomplish the same thing
kent >> Dumb comment - Kel-Tec SUB-2000 is a carbine, i.e. under a difference license-class in most countries.