hi everyone this is my mxus3kturbo 72v 28.8ah 80a bms/sabvoton100a controller on riddick rd 900. This thing rips make sure to subscribe to not miss any content
my bike is a shitty old barracuda rock, with a UPP 52V battery, and a 1500w 24ah generic Chinese rear hub motor running on 40amps. a very "amazon bought" ebike, but I love it. I stuck some schwalbe Johnny Watts on, 180mm discs, (mechanical disc system cos I'm not mechanically minded enough for hydraulics😂) and I manufactured a 14"x12" plate for the front to deflect debris from the battery and wind off my nuts. I then put a motorcycle windshield on to keep the winter cold off my top half, and the plate keeps it off my legs. it has rear indicators, and a 12v light rig, but no front indicators. it has a wide seat with it's own suspension, of a fashion, and all in all it serves me well. it tops out at about 40mph on the flat and 25mph up a decent hill, but generally runs around 35mph, but as I've reached 2500 miles it's begun to lose a noticeable amount of torque from a dead start. it used to pull to 30mph within a couple of dozen feet, but now it seems to take a while to wind up. does anyone else get this issue? I know parts wear, and I use it every single day, riding up two significant, steep hills of about 16%, but apart from slowing down some, it seems to be very rugged. I have a full susser which I bought with the intention of swapping the current kit over, lock stock and barrel, but I've become slightly obsessed with getting a 72v battery on it and a drive train which pushes it to 50mph. this mxus turbo looks the bollocks, and that whole rig you've got there is gorgeous. a very tidy build is that. do you guys know of any companies who make plastics and fairings for Ebikes? I looked for someone who sold windshields and wind deflecting fairings for electric bikes but I couldn't find anyone. As any ebike in Europe knows, above sorts 20mph in the winter, those cold winds can be brutal, and I reckon there's a market for this type of product, which you can just bolt onto your front forks and handlebars and have almost complete shelter from the wind and rain.
I know it's been a while but I wanted to mention that typically the unit pack power cells aren't very great and can have a bad internal resistance, or cells that quickly degrade (either because they are built poorly or because they are running too close to their limits) - over time, this degradation increases internal resistance, meaning you will get a larger voltage sag pulling the same amperage, giving you less volts and less power
Nice machine. I have an yt tues ltd with the 3t and Kelly kls7230 Controller. Before i used the 7218s 200a Version with 12s Multistar Lipo and 40ah but Thea we're shit also. Today i ordered 231 Samsung 21700 35a cells for 2 euro each dir a 3x7s 11 p Pack with 33ah so i can use it as a 7s for normal e Bikes, 14s dir the bbshd Kit and mxus and 21 s on mxus If i need the full bläst. In the Moment my Controller ist set to 100a and this Thing ist a besser. At 150 or 180 at 12s it becomes very very super strong and starts Wheelies at 85 kmh . Its absolute crazy
Thanks dude! That’s quality I bet that’s quick. I’ve only got this set to 80a and she still rips… You sound like you know you’re stuff! I am yet to try the Kelly controllers out: I like how U can fine tune the Sabvotons. I can imagine that’s fun. Thanks for watching and stay tuned for the next one ya hurr🤪🤪
Looks absolutely insane 🤩 what hub did you choose? Im looking to buy a set, but don't know if I should pick 21x3 3T or 16x4 4T? What are you using? Gonna use a 72v bms and 60A controller from sabvoton. Thanks! :)
Cheers mate! Good stuff and yeah it wheelies for fun mate. Never had mtx with 72v but the mxus is deffo quieter and smoother. Mtx is a clone. Mxus is real so I would say mxus.. But the mtx was a solid rim and still going strong now I believe. The clones are just as good
In the time that has passed between my comment and now, I've built 3000w mountain bike that can do the same with the blip of the throttle. 60 volts, 24Ah. @@pawelhein9121
You had any trouble with the rear hub staying in the dropout mate? Have 2 torque arms on mine now but when I just had 1 it came out of the dropout only in mode 3 also and it has 5 modes, any solutions? Cheers
Might need to ask a welding shop to add some steel plate onto the outside of the dropouts for you to thicken the width of the axle stay that it sits in. If you google "Custom torque arms for my conversion" on google images its the first one with a blue frame to give you an idea
@@kransurfing Paid my ebike guy to fix the hall sensor from just having 1 torque arm, he rebuilt it and put 2 torque arms, had 1 ride and the next time I went to use it the frame where the dropout is completely snapped off due to the torque when setting off and I just gave up on the bike, this was on a Carrera Vengeance frame but the 2018 version (the slimmer design), Im wondering if you know of a frame that can support this power? With summer round the corner really wanting a bike again, spent like over 2k on this one bike including parts and labour costs don't want it to go to waste. Thanks
I also got my motor directly from MXUS but at some points where the side cap screws are, the paint is gone around the screw. Bit unfortunate. Did you have the same experience?
Год назад
My almost 3 year old has a lot of flaked paint. The similary aged xf15f I have in the front still looks like new and I ride all weather, all seasons, all terrain. Yep... crappy paint jobby on the case but the insides are alright.
my bike is a shitty old barracuda rock, with a UPP 52V battery, and a 1500w 24ah generic Chinese rear hub motor running on 40amps. a very "amazon bought" ebike, but I love it.
I stuck some schwalbe Johnny Watts on, 180mm discs, (mechanical disc system cos I'm not mechanically minded enough for hydraulics😂) and I manufactured a 14"x12" plate for the front to deflect debris from the battery and wind off my nuts. I then put a motorcycle windshield on to keep the winter cold off my top half, and the plate keeps it off my legs.
it has rear indicators, and a 12v light rig, but no front indicators.
it has a wide seat with it's own suspension, of a fashion, and all in all it serves me well.
it tops out at about 40mph on the flat and 25mph up a decent hill, but generally runs around 35mph, but as I've reached 2500 miles it's begun to lose a noticeable amount of torque from a dead start.
it used to pull to 30mph within a couple of dozen feet, but now it seems to take a while to wind up.
does anyone else get this issue?
I know parts wear, and I use it every single day, riding up two significant, steep hills of about 16%, but apart from slowing down some, it seems to be very rugged.
I have a full susser which I bought with the intention of swapping the current kit over, lock stock and barrel, but I've become slightly obsessed with getting a 72v battery on it and a drive train which pushes it to 50mph.
this mxus turbo looks the bollocks, and that whole rig you've got there is gorgeous. a very tidy build is that.
do you guys know of any companies who make plastics and fairings for Ebikes?
I looked for someone who sold windshields and wind deflecting fairings for electric bikes but I couldn't find anyone.
As any ebike in Europe knows, above sorts 20mph in the winter, those cold winds can be brutal, and I reckon there's a market for this type of product, which you can just bolt onto your front forks and handlebars and have almost complete shelter from the wind and rain.
I know it's been a while but I wanted to mention that typically the unit pack power cells aren't very great and can have a bad internal resistance, or cells that quickly degrade (either because they are built poorly or because they are running too close to their limits) - over time, this degradation increases internal resistance, meaning you will get a larger voltage sag pulling the same amperage, giving you less volts and less power
Right piece of kit you've built there mate, really neat too - impressive!!!
I bet it's a blast to ride!!!
Cool how a ebike can just power up and wheelie like that 💯
What controller do you have ? Mine has a huge lag on the throttle so its hard to do wheelies
I believe you can change the responsiveness in the display
Nice machine. I have an yt tues ltd with the 3t and Kelly kls7230 Controller. Before i used the 7218s 200a Version with 12s Multistar Lipo and 40ah but Thea we're shit also. Today i ordered 231 Samsung 21700 35a cells for 2 euro each dir a 3x7s 11 p Pack with 33ah so i can use it as a 7s for normal e Bikes, 14s dir the bbshd Kit and mxus and 21 s on mxus If i need the full bläst. In the Moment my Controller ist set to 100a and this Thing ist a besser. At 150 or 180 at 12s it becomes very very super strong and starts Wheelies at 85 kmh . Its absolute crazy
Thanks dude! That’s quality I bet that’s quick. I’ve only got this set to 80a and she still rips…
You sound like you know you’re stuff! I am yet to try the Kelly controllers out: I like how U can fine tune the Sabvotons. I can imagine that’s fun. Thanks for watching and stay tuned for the next one ya hurr🤪🤪
Looks absolutely insane 🤩 what hub did you choose? Im looking to buy a set, but don't know if I should pick 21x3 3T or 16x4 4T?
What are you using? Gonna use a 72v bms and 60A controller from sabvoton.
Thanks! :)
Soo good bro i'm on my way to buy a kit like this for wheelies and other stuff ... Do you prefer the MTX 39 or this MXUS 3K turbo ??
Cheers mate! Good stuff and yeah it wheelies for fun mate. Never had mtx with 72v but the mxus is deffo quieter and smoother. Mtx is a clone. Mxus is real so I would say mxus..
But the mtx was a solid rim and still going strong now I believe. The clones are just as good
@@ebikekilla Thks Bro , maybe i try the mtx first . Keep making vids mate . )
Both rubbish, the best built stealth B52 2022 model with hemi gearbox. AUSTRALIAN MADE.
@@themanwithdahelmet. I have a early stealth b52 and trying to find a controller compatible with the 6kw crystalyte motor
Isn't the mtx39 just the name of a rim ?
again, ... nice..! Picked up another subscriber too...👍
Thanks 🚀
What the fuk that's badass
I need 100 more LG cells lmfao any donations welcome 🤣🤣🤣🤣
Yeah keep dese vids coming bro bike is a beast.
Wish I was closer I'd have to come race u man😁
Some nice roads for it down ur wey
Good stuff 👏 👍 👌
I'm trying to do atleast 1 video a week 🏆 and hehe what bike have U got mate. Yeah decent round these ways can't beat it
Sweet bike.
Are the wheels 26" or 27.5"? Thanks!
Sweet?! It's a fckin monster, and u say it is SWEET?
In the time that has passed between my comment and now, I've built 3000w mountain bike that can do the same with the blip of the throttle. 60 volts, 24Ah. @@pawelhein9121
Hi there love the bike ….. how many cells as I’m trying to build a 72v battery with not a lot of room …. Thanks heaps for any info
160 Samsung 35e cells
28.8ah 80a bms
Why the battery level is always 100%? Does it work? As far as I know it must've been decreased at least by 1-2 percent during the use.
Hi mate. The bike display only drops per 10%. I tend to use the voltage more than percentage now :)
Get a torque arm on that or your axle will wipe out the frame mount
How has the chamrider battery performed? Are they safe and quality built?
Jovany Union
You had any trouble with the rear hub staying in the dropout mate? Have 2 torque arms on mine now but when I just had 1 it came out of the dropout only in mode 3 also and it has 5 modes, any solutions? Cheers
Might need to ask a welding shop to add some steel plate onto the outside of the dropouts for you to thicken the width of the axle stay that it sits in. If you google "Custom torque arms for my conversion" on google images its the first one with a blue frame to give you an idea
@@kransurfing Paid my ebike guy to fix the hall sensor from just having 1 torque arm, he rebuilt it and put 2 torque arms, had 1 ride and the next time I went to use it the frame where the dropout is completely snapped off due to the torque when setting off and I just gave up on the bike, this was on a Carrera Vengeance frame but the 2018 version (the slimmer design), Im wondering if you know of a frame that can support this power? With summer round the corner really wanting a bike again, spent like over 2k on this one bike including parts and labour costs don't want it to go to waste. Thanks
Красавчик! 👍 🦾
Красавчик, то красавчик, только мксус не бывает на 3 киловатта
@@lifeisbeautiful547 почему есть. Который 5k turbo. В e4bike продаеться такой. Только там указано типо он 5kwt. Пиздеж
💪🏽💪🏽
💪🏽💪🏽
I also got my motor directly from MXUS but at some points where the side cap screws are, the paint is gone around the screw. Bit unfortunate. Did you have the same experience?
My almost 3 year old has a lot of flaked paint.
The similary aged xf15f I have in the front still looks like new and I ride all weather, all seasons, all terrain.
Yep... crappy paint jobby on the case but the insides are alright.
Just need a little tlc and she I'll be good, new video coming out this weeknd
skys out thighs out amirite
Very cool
How long will 3k last on that battery size?
Kaden Garden
Hello where can i buy a 72 v conversion kit need at least 50 mph but cant find any good places that sell them maxus sight says it isnt sacure
Message me on insta, il get you sorted
cool😆😁
Thanks dude 🔥
Thanks dude 🔥
nice man ..please can you tell me where you got motor from
cheers
Hi Giles. The motor is direct from the manufacturer. Mxus 👍🏻
Nice man I've messaged them just waiting for them to come back.. did it come with rim ? how much was it ?
Weissnat Summit
Everything you show is on the flat, need to know how it copes with hill climbs, on 20% and 30% slopes. Because torque is critical.
Nienow Wall
Is that mph or kmh
do u recon my collective c100 could take 72v 3000w hub drive?
Yes, a friend of mine uses a c100 that's a really good bike for these ebikes
what is the cost of building this bike?
In the current video around £2.3k
@@ebikekillabike included?
what kind of display is this?
What's the vmax?
What was that wheelie at 7:15 whatafak
Standing on swingarm🔥
@@ebikekilla ohh, wow
🤣🤣🤣🤣🤣