A little tip on the transmitter. Put a little lego wheel on the channel 3 knob. And you can use your thumb to steer the rear wheels. And your other hand on the wheel. It makes driving fantastic.
I thought about doing this on my TF2 but more like supercars where it isn't noticeable. and that way id get a little function to fight hills and yet still look like a scale Toyota. just a fun thought. we'll see. Good video RC friend!
I have the 6 channel version of your controller paired with a R4FGMv2.2 receiver with built in gyro. Is it possible have the gyro control two steering servos? My plan is to induce body roll to simulate weight shifting side to side in my drift truck.
thanks, the manual is not great and the menu system on RC6GS is crap compared to my old Spektrum DX3R I needed to setup a dual servo for my E-Revo and this helped me a lot
@@AshsRCGarage most winch controller needs or require a 3-way switch so you have high Center and low setting. The Yeah Racing controller has a jumper to eliminate the requirements of a 3 way switch and uses a momentary switch that most transmitter has.
Thanks for making my day😅.
Thanks I wasn’t expecting to find a video and this is gonna help me out so much
Good video tank i needed a refresher lol
Lol, anytime, you know I'm there for you LOL
This is the best channel mixing explanation on the web. Great work. 👍🏾 💯
A little tip on the transmitter. Put a little lego wheel on the channel 3 knob. And you can use your thumb to steer the rear wheels. And your other hand on the wheel. It makes driving fantastic.
Good idea I might have to try that
Got to say. Owning one of these controllers. appreciate you doing these videos Tank. Well done man.. :)
Another awesome instructional RC video! Love the creativity Tank!
great information and video
Very nice 👍😊👍
Thank you sir.. For sharing this useful information... Very clear and accurate informations... Like and Subscribed....
I am glad it was helpful to you. Thanks for watching and supporting
Thanks needed this information 🙏🤘😎
Thanks for stopping by to watch and I am glad it was helpful.
I thought about doing this on my TF2 but more like supercars where it isn't noticeable. and that way id get a little function to fight hills and yet still look like a scale Toyota. just a fun thought. we'll see.
Good video RC friend!
hello, thank you for this tutorial, just a question to change the direction mode, we can create a model for the different modes either crab or reverse
Could u do it the opposite way so u have the normal steerin on big wheel n the 4 wheel steerin on the little wheel m8
Nice one👍 in mix the MST is CH3 (CH3 set to the VR dial) and the SLV is ST (steering)
Nice video
Gta6 is looking sick
Precious info here! Quick question, though: is it possible to achieve the dual steering using a single servo?
Thank you for the great comment, yes some companies actually do sun a single Servo for dual steering like Tamiya Clodbuster and the HPI Wheely King
@TheTankRC great! Thanks for these references, I'll check on them.
I have the 6 channel version of your controller paired with a R4FGMv2.2 receiver with built in gyro. Is it possible have the gyro control two steering servos?
My plan is to induce body roll to simulate weight shifting side to side in my drift truck.
built in gyro only works on channel 1, and yes you can use a Y splitter to control 2 servos
@@TheTankRC if you set your PMIX to Master ST and Slave CHx the gyro should still work with dual servo cars? or not?
thanks, the manual is not great and the menu system on RC6GS is crap compared to my old Spektrum DX3R
I needed to setup a dual servo for my E-Revo and this helped me a lot
Glad I could help. Thanks for taking the time to leave a great comment.
Can you run two esc this way too?
Hey mate can you independently do the rear with the silver knob setup
Yes you can
Is there anyway of switching between crab and normal 4ws on this handset.
With this remote you have to use the menu to switch between the modes, it does not have a button that enables you to cycle quickly through the modes.
Thanks for the swift reply dude.
Awesome video by the way. No messing and all usefully info.
What about a winch?
You could add a Yeah Racing YA-0528 winch controller and use the momentary switch to control the winch
@@TheTankRC what is the momentary switch? I have a Reefs 299LP with built in controller.
@@AshsRCGarage most winch controller needs or require a 3-way switch so you have high Center and low setting. The Yeah Racing controller has a jumper to eliminate the requirements of a 3 way switch and uses a momentary switch that most transmitter has.
@@AshsRCGarage www.yeahracing.com/multi-function-controller-system-for-crawler-winch-ya-0528-00074366