Это видео недоступно.
Сожалеем об этом.
Flysky FS T6 Transmitter and FS R6B Receiver Binding Procedure
HTML-код
- Опубликовано: 2 дек 2016
- This video is about binding FS T6 Transmitter with Flysky FS R6B. Hope this video is useful to Beginners.
Please like share and subscribe.
i dont know why but channel 3 seems to be the magic number! stressed for hours about not binding and soon as i did it step by step as you did, it worked!
Thanks a ton man, u just saved me from buying a new reciever. I thought my reciever wasn't working
Every time I buy a new model, I have to watch this video, this is the best :) for me....
Thanks. My IRX4 multiprotocol module has made me look for my old receivers!
Thanks very much! Binding is OK now. Happy landings.
Thankyou aapki wajah se mera drone pura complete ho gya I wish aapko 100 saal jiyein
UNBOXING AND REVIEW EVERYTHING please send me your WhatsApp number bro
Md Arshad Alam WhatsApp no. Toh ni hai bt by the way my no. Is 9454839365
Md Arshad Alam call Karna ho toh Abhi hi Karna otherwise I will be busy
Md Arshad Alam why are u not calling me
UNBOXING AND REVIEW EVERYTHING PLEASE send me your contact number
thank you you save my project and my stuides love you my man
Thanks this worked with my pistol grip style controller model FS - GT3B
Nice brother 👍 👍 👍 👍 thank you for sharing
I'm using my transmitter and receiver for RC boat why did you Channel 3 for your throttle? and which channel should I use for my steering?
SUPER VERY THANKYOU SIR!!!!!
Excellent.. not easy to figure out on your own.
Thanks for posting, great video
Hey!!! Maddy Mad, your video was so helpful, now I got just one question if you could answer me or anyone on the comments. How do you connect that receiver to a flight controller (mamba or skystars or any flight controller). Anyways thanks so much bro! keep it up:)
So the term marked Bat is not for power?
I get the pairing, but the controls are messed up.
I have my sailboat sail servo working, but on the wrong Left Hand control.
I can't seem to bind a Fly Sky FS-T6 transmitter to an FS-A3 receiver using your instructions
Super. Thank you. Very good video
Aliihsan Karademir please send me your WhatsApp number bhai
Nice
I am 11 year old ,your video gives me hope to fly.
I am learning and doing all it takes to fly my plane .
Have a WLtoy F959 transmittor and fly sky reciever FS-IA6B,
How can I make it work,I am stuggling. Kindly guide me ,I hope to hear
constructive tips,suggestions & feedback from you and others .
This might help - ruclips.net/video/6WjT2a3mXEA/видео.html
Can I bind my FS-T6 transmitter to aFS-iA6B reciever? And how
Thank you very helpful .
Thank you
my receiver lost the binding with the radio. its already connected to the fc. can i just use the binding plug and connect th ebattery and try to rebind it or do i need to disconnect it from fc also?
my aux channel is not working. my transmitter is fs i6x what should I do
My old reciever had burnt if I bought a new reciever is the new reciever will work with my old transmitter .plz tell
Yes if it is compatible one
Hello fellow RC hobbiest. I got a question about this transmitter. Is there anyway at all to turn OFF the display after binding the transmitter and the receiver? Display will suck all the battery power very quickly. No wonder this transmitter requires 8 batteries... :)
I got a quick question. 0:43 Do you have to remove the bind plug right after you bind the transmitter and the receiver? Can you leave it connected to the receiver? For my application, I always left the bind plug connected to the receiver. Is that bad or it won't hurt anything?
Yes you should remove the bind plug because you are actually shorting the bind circuit using that plug and once the binding is complete there is no need of it. If you left it as it is, it will still work I haven't faced any problem yet. But you might need to bind your tx-rx again. When you reconnect the receiver and bind plug is connected already, it may go to the blinking state and then you have to bind it again.
Ooh... No wonder the receiver always blinked every time I power recycled the rx. I always thought it is normal, because like you said I was always able to operate my device afterward with the bind plug connected. So, does this mean that once you bind the tx with rx, you never have to bind them again? thank you for the reply. :)
Yes once the binding process is success you should unplug the bind plug, it will save the settings and you don't need to bind it again.
Hi Maddy Ny, I have a question. Is there a way to turn off the display on the transmitter after you successfully bind the receiver and the transmitter? thanks.
if ESC 30A can use battery 7.4V 2200mah ??
THANK YOUUUUU
I have a fs-i4x TX and fs-a6 rx. Both came pre blinded. I would like to set throttle (channel 3) fail safe to zero. Is that possible? I do not have any fail safe button on my rx. And my TX does not have a lcd screen.
No actually this receiver does not has fail safe settings. You can check for firmware upgrades for your TX on their official website.
Thank you so MUCH!
Can I just plug power strait into receiver after binding
Spot on thanks
Gutes Video !...leider nicht in deutsch..aber gut veranschaulicht ! -Danke - !...
Alguém sabe me informar porque alguns micro servos ficam vibrando
what other rc stuff you are having i also play with rc stuff i have made rc plane drone
rc car with brushless moter high speed
and also some racer drones make a list what you have an reply me
how to connect and setup it for quadrocopter? Plane model is very simple but there is no video on youtube for quadsetup!
check this link ruclips.net/video/P4qz-R2Vvr4/видео.html
plsss help me ..... ek chenal me 2 motors ko kese joind kr sakte h plss tel me
OK - Perfekt !!
my f450 quadcoptor programe cc3d vach cheyyumbol fsct6b reciver active akunilla entha ithinte proble?
amegh karivellur hiii bro please send me your WhatsApp number
9539485381
Can I use my old rc helicopter remote to make my own airplane please give suggestions
Yes, but you also need to pull out the receiver board from your heli or buy the same. You have to control ailerons with one servo so that you can use the another one on elevators. Do other calculations also like thrust and torque to decide size of your airplane.
@@maddy232853 Thank you can you send a video
Super
thank you so much
how would i power a 4 in 1 esc, the whole pdb routine?
We can put the esc in ch no 1
Thanks.😎👍
Why does my battery have 4 slots, it doesn't fit
i have this receiver and an FS T4B transmitter ,but when i bind them the receiver light blinks but the transmitter can not bind with the receiver even if i press and hold the bind key,i dont know what to do,pls help me
You need to check compatibility first. Check this rc.305.cz/storage/FlySky_Tx_Rx_compatibility_table.pdf
thanks for reply but it is compatible ,now what should i do?
Someone help please? Receiver is blinking and my remote is aswell... but they are not connecting. I have same receiver as video and a 2.4ghz spectrum dx4e
you have to have the same brand I believe... or same ghz
Quicksilver Robotics I found out it I needed the same brand. Who wants receiver for £8?
Spectrum is not compatible with this receiver.
Maddy Ny ññq
Whats the range? 500m 1000m??
If you are looking for the range beyond 1000m, go for FS-i6 model. I lose control beyond 100m with this FS-T6 transmitter. You can use this same receiver with FS-i6 radio as well.
My transmitter doesn't have a bind button! Please help!
Which one you have?
How can I bind it to a wizard 220
I6 ka renge kitna hota hai
Why I have to bind..? and Have I to bind it again whenever I use my plane
Without binding it will not receive the command from transmitter. No you don't have to bind it again with same transmitter.
Aryan Singh please send me your WhatsApp number bhai
Thanks
Ben Urban please send me your WhatsApp number bhai
I did just as he did to three receivers none would bind.
Mine the light stay on but is no communication between the drone and is not reflected on the screen of the remote control
I also such equipment is
What if it won't bind then what?
este receptor tem failsafe?
No it does not has fail safe settings.
Tuso
can i bind any receiver to any transmitter?
No, you will get a list of compatible transmitter when you buy any receiver. This particular receiver will work with FS i6 / i10 / T6 / CT6B / TH9x
You sure about it being i6 compatible.. It isn't. I believe that one is a green color with 2 antennae i.e FS-iA6 2.4G 6CH AFHDS Receiver For FS-i10 FS-i6 Transmitter
Actually most of the manufacturer make their latest transmitter to work with their earlier receiver models until or unless any major change in technology. You can bind this receiver with i6. Please check this
ruclips.net/video/kVCvVHo8OJo/видео.html
why you the circuit
why you do bind the circuit
Shek Amir hii bro please send me your WhatsApp number
Shek Amir hii bro please send me your WhatsApp number
how many transmitter rupess
around Rs 4000/-
sanjay verma please send me your WhatsApp number bhai
This is such a bad video. the information is correct but should of only taken 30 seconds to get across
Nice