The Rat Rod Tonka Winnebago RC Convertion, Part 3, Trailer & Test Drive
HTML-код
- Опубликовано: 5 окт 2024
- Be sure to check out my Amazon Influencer page here: amzn.to/2U12C2l
I will be adding items to my store all the time and all proceeds go right back into the channel! Be sure to check out my Amazon Influencer page here: amzn.to/2U12C2l
I will be adding items to my store all the time and all proceeds go right back into the channel! Here it is! Join me putting together the Team Raffee trailer and getting the vintage tonka Winnebago up and running for its maiden voyage. Trailer hitch fab as well! - Авто/Мото
That's so freaking cool! I had a Tonka Winnebago when I was a kid. My Star Wars guys basically lived in it.
Two years later, fantastic build Brother.
I like how you can see the suspension working, where the tires are bumping up and down but the heavy truck stays relatively leveled.
Very cool!! I remember being a little kid in the 70’s playing with Tonkas .
I had a real Champion Transvan RV for a few years. We called it the MPU
Mobile Party Unit
On the back just to the left of the rear window, I just brushed painted with a artist brush. The short bus.
About four inches tall, got a lot of laughs. Last time I saw short bus a buddy of mine had bought it from me too many toys in the driveway, it was doing deer lease duty. Good times.
Your work is incredible. All the series are unreal. This Rat Rod Tonka Winnebago RC is CREATIVE!!!!!!!!!!!! All three parts. Completely AWESOME.
Awesome Project , Winne hauls the freight with ease !
I love that low to the ground front bumper, didn't seem like it was much of a hindrance though. Man that thing sure is big on cool.
I was thinking it it too low. Does the body scrap of rough ground? Raise 5mm front n rear. Still very nice. Are you going to restort the paintwork?
That trailer looks awesome ..oval all cool build
BY FAR THE NICEST WINNEBAGO CONVERSION TO DATE!
Coolest Winnebago conversion I've seen for sure👍
Looks great. Can see it hauling a rat rod to a show.
Hey RC Everyday hope your doing great. I've got a little challenge for ya. How about painting the interior in the rc motor home? Captains chairs white, sink silver etc. Nice trailer, Really like that one. You did a great job on that motorhome. It's really nice. Like the lowered stance on it. It all goes together well. Great Job man. Take care have a great weekend bro.
What a great fun build.
I'll have to check out the Raffee trailer, because I need axles for a wider build. I want to build a goose neck for a 1/6th scale truck, so a wide 1/10th scale might be the ticket. The Winnebago just looks awesome rolling along with that trailer.
It gave me a good laugh with the “Sorry Wes”. You’ll get back to the Peterbilt soon, I have a good feeling.
Dude that thing runs amazing brother, killer job, love messing around with these old Tonka motor homes, have 4 of them, have rock crawlers but as of now I’m going to have me a low rider. 👍👍👍 bro, can’t wait now and thanks for the idea on the low rider.
OMG that's cool. I had that winnebago as a kid
What an epic build
Love the long horns!
The winny looks great , love the way it handles, both driving, and hauleibg. The rat rod looks perfect for the trailer. In a word , AWESOME. Keep 'em rolling. Thanks for the videos.
You do some amazing rc builds. Keep up the awesome job. I look forward to what's next.
This is so cool! 👍👍👍👍
To bad the little man and lady with dog that originally came with it are lost to the ages. 😊
Beauty stick dodge @16:00 lol. Winnebago worked out nice, Awesome job.
This thing is so awesome!! That 58 Chevy is rad too bro
Just an idea , if you have an extra Tamiya semi tire & wheel , mount it on the rear of the Winne just above the trailer hitch with a stand-off .
That's awesome. Had the same RV as a kid
That turned out pretty nice
Awesome work! Reminds me of the Winnebago from Walking Dead TV series sorta.
Very cool winnebago
very cool, and the rat rod too,
Amazing build!
Awesome build... Great work looks super cool slammed
That RV is cool!!!!
great job well done
Very cool! It doesnt rock near as much as i expected either. Great job! For interior, how bout a disco ball? Lol Shag carpet, lava lamp...
kool , thanx....Neat rig ,A real classic
Robert
Yep I like this build R C Sparks did one for off road. the trailer needs a winch.
I like the lowered look and keeping it simple works, why not swap the ESC and receiver box's round so the battery wires are at the front.
Definitely one of the coolest builds I've seen!
Nice work 👌
Great job on the build!!!
It occurs to me that with the aluminium angle pieces you used to anchor the leaf springs in the first video could have been connected together to form an actual chassis without sacrificing the ride height you have. Also...a bit of clever welding or attaching and that chassis bits in the rear could have been extended to create a stable anchor point for the trailer hitch through the rear. I am thinking long term. I love this whole build. I know want to find the old Tonka red and green dump truck I had as a kid and repeat this build on that. I have an old UHaul truck from the early 70s and a larger Tonka Ambulance that would be killer to make as an RC. I know from past experiences that these clever builds often end up failing and if I had only worked a little more I could have a stable platform to avoid body warping or tearing. Also...a bit more weight on the bottom would add to the killer body sway and also lower the center of gravity even more.
Really there is no need for a full chassis with the giant steel box of a body, even with the sections cut from the floors it has no give in the structure at all. Took it out for another drive today with absolutely no issues whatsoever. Dont get me wrong I love to build overkill but it really isnt necessary on this. The vintage steel is far stronger than the aluminum angle could ever hope to be.
Very Cool ! Rat Rod Winnebago ! I Totally Want 1!!! Lol
Excellent video. It needs a driver! Also excellent music in the vid.
Dude! It looks cool! I love the way it sway's around like the real thing! I bet it would look even better with the rc4wd diesel white semi wheels!😎👍
Love it. Looks great out in the sun😎
Dude I LOVE the Winnebago!
So cool! Well done!
I still watch this video every time it pops up. I'm not sure if u still have it or have finished the interior but and updated video on this would be cool!
I’ve done a newer video adding some stuff to the interior.
@@RCeveryday did u ever watch any of RC Sparks videos on the one he did with 4wS?
Off to SEMA you go, the Winnebago has a great stance very cool.
Damn that’s a sharp build. Your skills are just shocking.
Awesome job again sir. Love me a trailer!
Wow that turned out awesome what a great setup appreciate you sharing i'll be watching for more
Super cool build bud! Your a awesome creator!
it looks great brother. great job
Impressive build bro! Nice work really dig'n the lower'd down look!
Man that thing is killer
Killer man👍👍👍 that thing is begging for you to fab up some air ride😁😁😎 maybe even on the trailer too!!!
Lights would really take it to the next level.
Nice work!
Should put led running lights where the stickers would be on the Winnebago and make the trailer match the colors on the Winnebago
Awesome rig bro keep doing what you do keep it scale
Love it, Looks so nice. well done.
Looks great, especially when pulling the trailer.
14:55 such an awesome look at it
Love the build sir. Totally epic
I have that 5:1 gear reduction unit(transmission). You need to put the provided pinion closer to the motor side and not to the end of the shaft. If you put it to close to the end it will bind on that large washer thing that protects the gears. Did you try filing a flat spot on the broken shaft to secure a grub screw?. Great job! Your doing great work and have some nice builds as well.
Somebody's paying attention!
One of a kind, I like that👍👍
It's all preference of course but at this point , I would turn that thing into a vendors truck ..years ago a buddy of mine build a 20s style school bus into a chop top vendors truck for hot rod magazine , I see the potential there to make that thing a awesome center piece for your rc shows , especially for swapmeets and get togethers with other enthusiasts .. maybe some side pipes and a mural scene with your logo .. maybe build some tables and a retractable awning ..rat rods are cool but who has a hot rod motorhome ? When I used to build custom choppers .. I found a t-shirt airbrush artist that , I could drop fenders and tanks off with and let him go nuts ..then I just simply clear coated the work he did .for $30 bucks and poof $1200 dollar custom paint job .. shhhh trade secret .... Of course I like the RV .. and everyone has ideas but that thing could really be cool for all sorts of shows not just rc ..rv shows , hot rod shows you could probably bring in a lot more enthusiasts any way great show thanks for sharing ..
That turned out awesome. Love the Jesus is my airbag sticker 👍🏻
Bumper, you mean plow right?? lol awesome build!
Looks really friggin' sweet. I would add curtains in the windows.
You have your steer horns on backwards but still a great build video, Thank you!
I would be so grateful for some advice I've just bought one for the same reason
Man the way I did it was just keep it as simple as possible.
I love this one!
Man that Winnie looks great! Nice work
Very nice man thats awesome!
Dude!! That Winny is sick!! I have 100% desire to own one, and 000% talent to build one😢
Nice job
Looks good, but imho it would be killer with bags!
Very cool I wish it was mine
Great job man
AWESOME! This is a really, really so coooool build !! Good job, 👍🏻👍🏻
I just seen this vid its pretty cool wat u did and why not put led lites in place of the fake lenses that way it gives the camper more awe factor I think it wld look great. Awesome build and reuse of a old toy.
Real nice!!!
So cool!!
Great video. You should try out building your own trailer for the channel!!
What a beaut of a rig. Nice work. Subbed
Dope that thing came out so awesome.
That is awesome
NC MOUNTAINS ❤. Man . That really nice work!! . That trailer would look sweet pulling my fy03 eagle! From banggood! On my new trx4 sport ......👍👍.!!,
Awesome build !!
Maybe should have bagged it and called it the Winni- bago
wow thats realy nice, i think it needs a bit of lift in the front
I have 3 Tonka Winnebago had them since I was 10yrs old and many other collectables I am 47yrs old now just thought I'd share that with everyone
Looks like it's been bagged!
Consider fitting the battery cable plug to the body, so when it's time to recharge, you just plug the charger into the body.
...& solar panels.... gotta have solar!!
It looks good to me it looks like it worked fine look for a see-through red tape temporary fix for tail light lol
So cool
Very cool. Find a little Walter white figure and put him behind the wheel.
TOTALLY AWESOME
Have you thought of putting a cover plate/skid bar under the Winnebago? As a cover and to hide the important stuff
I’ve considered it. The suspension has settled a bit now so it’s all but useless in the gravel. Just have to decide if it’s a pavement only rig or not.
Awesome!!!