End of the project, heating installation, From A to Z

If you like the content I publish, you can support the channel. Thank you
Support with:
suppi.pl/szymonhawlicki Possibility of support via BLIK and 18 Banks
paypal.me/szymonhawlicki?coun... Direct transfer to PayPal account
tipply.pl/u/szymonhawlicki Possibility of support via BLIK, PayPal, PaySafeCard and others.
I would like to thank anonymous and named people for supporting the channel 😁 thanks to you, the channel remains independent 💪
Links to materials used in the video:
By using affiliate links you support the channel, thank you.
Microphone 🎙️ SYNCO G1 alii.pub/6mq47k
18650 cells NCR18650B 🔋 alii.pub/6o09gg
Capacity test of new 18650 NCR18650B from AliExpress - is it worth it?
• Test pojemności nowych...
Inspection camera 2 lenses 📹🔍 alii.pub/6wmudh
Welcome to a new mini-series of episodes about modifying the water filling connection for central heating. A series from the From A to Z section so that step by step I show how I work and at the same time I explain something.
In this episode, disassembly and desoldering of existing connections so that I can adapt the connections to my needs.
Connection modification, tap water - heating installation, From A to Z, part 1
• Przeróbka przyłącza, w...
Here we go with the second part, you need to remove the excess tin after unsoldering the old connection.
I used a sharp file, not a wood file of course, but a metal stripper.
If everything fits nicely and you can insert and easily remove the fittings, you can consider that you can start further preparatory work, we finally want to solder it 😁
Work after unsoldering copper pipes. Heating installation, From A to Z, part 2
• Prace po rozlutowaniu ...
Here we go with the second part, you need to remove the excess tin after unsoldering the old connection.
I used a sharp file, not a wood file of course, but a metal stripper.
If everything fits nicely and you can insert and easily remove the fittings, you can consider that you can start further preparatory work, until we finally want to solder them 😁
Assembling the water installation. Heating installation, From A to Z, part 3
• Składanie instalacji w...
We are one step further, we apply flux and solder, and we screw the water refill connection in the installation with Teflon thread. It seems like a simple activity, but it takes some time to do everything right. Although, like in "live", smaller and larger mistakes are made.
If someone is wondering why I look at the bottom of the soldered fitting, the answer is simple, when a "drip of tin" is formed, it means that the socket connection of the fitting is saturated with tin and the next element can be soldered.
This is not an instruction, so please do not imitate, I make many mistakes that can cost your life or health, it is recommended that the work be performed by a licensed professional.
Finishing, heating installation, From A to Z, part 4
• Wykończenie, instalacj...
I've reached the finishing stage, so I need to hang a modernized water filling system for the central heating on the wall.
But to do this, you need to have a designated drilling location and select a dowel, a mounting pin and a pipe holder. Fortunately, I have a supply of everything 😁
Part 5
It is time to complete the project started years ago, namely the replacement and modernization of the filling and water replenishment system in the Central Heating system. Other videos show how I modernize the water replenishment system, and another shows how I assemble the water column measurement system. And the cherry on the cake is to brick up the hole in the wall, which I did myself, so that the topic could be considered closed 💪
This is not an instruction, so please do not imitate, I make many mistakes that can cost your life or health, it is recommended that the work be performed by a licensed professional.
Timeline:
0:00 - 2:52 Action plan
2:53 - 3:50 Stage 1: cleaning the hole in the load-bearing wall
3:51 - 7:04 Stage 2 Disassembly of the installation
7:05 - 10:12 Stage 3, unblocking the window silicone
10:13 - 13:08 Stage 3 Applying silicone to the wall
13:09 - 16:47 Stage 3 Sticking the "mortar basin"
16:48 - 21:31 Stage 4 Inspection of gluing and holes in the wall
21:32 - 26:25 Stage 4 Mixing the mortar
26:26 - 29:45 Stage 4 Filling the hole with mortar
29:46 - 31:20 Stage 4 In the meantime
31:21 - 34:26 Summary of work
Current episode made with:
Synco - G1L - microphone
iPhone 8 - Audio and video
iPad 7 - preview from the inspection camera
Assembly - iPad 9
Thank you very much @Kenny88 for creating a trailer for my channel 💪

[@MaoWatt]

Dziura zatkana i gitara💪

[@SzymonHawlicki]

Kilka lat po terminie ale się udało 💪 teraz muszę załatać moje zdrowie które ma większą dziurę niż ta ściana miała …

[@MaoWatt]

Jak trzeba to trzeba🙂

[@SzymonHawlicki]

@MaoWatt chyba pierwsze L4 mnie czeka … tego się nie spodziewałem …

[@MaoWatt]

@@SzymonHawlicki no to kiepsko to wygląda, odpocznij i wracaj do zdrowia.

[@SzymonHawlicki]

@MaoWatt dzięki, przyda się bo tyle jest do zrobienia a nic nie robie …