Okay I really want to like this sight. The problem I'm having is the laser alignment never stays put. It's extremely frustrating and I've spent hours trying to get the laser to line up correctly. it seems inevitably when you tighten down the set screws you move the laser. Not only that, once I feel like I have it where it should be, I shoot a few arrows and then the laser is no longer aligned. I can tell because when I range my 3D targets ( I already know the distances via my handheld rangefinder) - I range right over their backs or under them and then I get the incorrect holdover pin. I really want to take this hunting but if I range the deer's shoulder and it ranges over its back or under its belly and I miss the shot what the hell good is it? To give you an idea of how long I've been screwing with it, the batteries in the laser have now died and I have to wait for new ones in the mail!
Ok. Got the new batteries for the sight in laser... After some messing around, I've finally got it ranging effectively at long range. I recalibrated the sight, and now it's drilling 3d targets like crazy. I'm gonna hunt hard with this thing... Let's see how it stands up to Florida heat and swamps, and the frozen hunts later this year in Illinois. Super excited to put this game changer to work.
Mine was extremely accurate. Way more than my Garmin xero. That is because mine was messed up so they replaced the unit. Burris has Horrible customer service. I had my unit replaced. It took months. They were not polite at ALL.
I don't guess I heard, but do you put 20 yard fixed point on deer and hit range button? If you don't have point to aim, how do you know ur aiming at deer or tree just behind it?
Does the rear peep sight have a windage setting or just a elevation setting? Once the rear peep sight is coincident with the string peep sight, can the string peep sight be removed?
Yes, so long as your arrows are tuned and you're holding/releasing properly. Basically, once you're dialed in the rangefinder lights up the right pin for the distance.
My burris orcale is causing really bad rattle on my bow. When I take off the sight the rattle is gone. Only rattle when the screws are tight. help please.
I'm telling you, their customer service is my only complaint. Awesome sight. Works great in the field. But if you need anything from them, you're screwed.
Tried doing the same as he did draw and see where the lasers at and then adjusted the same way he did. Back to full draw the laser is completely off DOES NOT WORK. I had to keep drawing back and make small adjustment until it lines up. Still have problems ranging out to 50 yards. A lot of false reading from the laser.
So, after you have done your calibration work, all you have to do is turn the sight on, put the laser on the deer and the sight will display the dot, which you align with the place on the deer you want the arrow to hit? No more guessing the distance.
To cumbersome for hunting, just my feedback. Not being negative just to large and awkward for where a lot of us hunt. Maybe Burris will take this feedback and make a smaller package.
Quite far from the truth. These in fact require quite a bit of extra practice. Extra factors come into play at these extended ranges and without proper fundamentals and practice at these ranges you'll be sending arrows all over the place.
What if that big buck rolls in breathing steam out of his mouth and his nose sees the laser and then runs off I'm not taking No chances site too much money anyhow shoot fine without it
One thing about the archery market -- you get plenty of choices to find the exact setup you want. The Oracle won't be for everyone. But I would point out that it does NOT have a visible laser. It's a rangefinding laser beam, which are totally invisible.
@@GrizzAxxemann The visible laser is just for initial alignment and sighting in. It is then removed from the sight, and can easily be used to tease your cat or mess with your buddies.
@@BurrisOpticsCompany Just the answer I was looking for. It's just a shame that my bow is only worth half as much (in Canadian dollars) as the sight. Ah well. Get good with what I have then I can upgrade to the nice high end bow and justify a $1300CAD sight. I already know it's good kit, since the rifle scopes I have have yet to fail me.
I imagine this will be illegal in many states for taking deer....but given the fact certain crossbows are now allowed, I suppose anything will soon be the norm.........
You are correct. There's some more info on our website (www.burrisoptics.com) about where it's legal. And as with all game rules, it can get confusing, so make sure to check with your local departments.
I'm in my mid 40's and not tech savvy. It really wasn't hard to set up. It is really cool not having to use a range finder when the deer is coming in on you.
Actually yes. The sight ranges super fast. I had a buck moving and I kept having to range him. I stopped him with a " mack". Shot was true, deer in the truck.
This is when hunting is no more hunting lasers and crap you dont need. Just go to bucher shop lol. Forcing technology in everything , like hunting in video game. F... this !!!
Um you do know that modern bows are made with Auto Cad, polymers, and cutting edge science don't you? Hunt with your hands and teeth if you really want to get rid of technology. Run the deer down and strangle and bite them to death like the first cavemen.
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
Wow who knew sighting in a bow could be so easy, I've shot 2 deer since that began
Hahah the ending line is great ”and that all there is to it” after a 30 minute dial in session
Boy, these comments would have us believe taking shots at three distances is somehow rocket science
How well does the pin show up in sun light
How do you restart your arrow range 1 and 2..let's say I think I did t it wrong and wanna start over..
Okay I really want to like this sight. The problem I'm having is the laser alignment never stays put. It's extremely frustrating and I've spent hours trying to get the laser to line up correctly. it seems inevitably when you tighten down the set screws you move the laser.
Not only that, once I feel like I have it where it should be, I shoot a few arrows and then the laser is no longer aligned. I can tell because when I range my 3D targets ( I already know the distances via my handheld rangefinder) - I range right over their backs or under them and then I get the incorrect holdover pin.
I really want to take this hunting but if I range the deer's shoulder and it ranges over its back or under its belly and I miss the shot what the hell good is it?
To give you an idea of how long I've been screwing with it, the batteries in the laser have now died and I have to wait for new ones in the mail!
Ok. Got the new batteries for the sight in laser...
After some messing around, I've finally got it ranging effectively at long range.
I recalibrated the sight, and now it's drilling 3d targets like crazy.
I'm gonna hunt hard with this thing... Let's see how it stands up to Florida heat and swamps, and the frozen hunts later this year in Illinois.
Super excited to put this game changer to work.
casualobserver77 holding up for u?
Mine was extremely accurate. Way more than my Garmin xero. That is because mine was messed up so they replaced the unit. Burris has Horrible customer service. I had my unit replaced. It took months. They were not polite at ALL.
I don't guess I heard, but do you put 20 yard fixed point on deer and hit range button? If you don't have point to aim, how do you know ur aiming at deer or tree just behind it?
Does the rear peep sight have a windage setting or just a elevation setting? Once the rear peep sight is coincident with the string peep sight, can the string peep sight be removed?
So once it is dialed in, can you laser a 75 yard target and the pin shows up and you nail it?
Yes, so long as your arrows are tuned and you're holding/releasing properly. Basically, once you're dialed in the rangefinder lights up the right pin for the distance.
The range finder is extremely accurate.
My burris orcale is causing really bad rattle on my bow. When I take off the sight the rattle is gone. Only rattle when the screws are tight. help please.
I've tried contacting burris and still no reply from them its been 2 months now..
I'm telling you, their customer service is my only complaint. Awesome sight. Works great in the field. But if you need anything from them, you're screwed.
Does this sight only use yards? Or can it switch to meters for us european guys?
You can switch it to yards 😁
Tried doing the same as he did draw and see where the lasers at and then adjusted the same way he did. Back to full draw the laser is completely off DOES NOT WORK. I had to keep drawing back and make small adjustment until it lines up. Still have problems ranging out to 50 yards. A lot of false reading from the laser.
Очень хорошо рассказано и показано! bow напоминает Обессион? болты на плечах откручены на 60#?
Поблагодарить.
Вес лука для стрельбы из лука очень низкий, что облегчает съемку большого количества видео. (Google Translate)
And it all comes in a compact, 10 lb. package.
So, after you have done your calibration work, all you have to do is turn the sight on, put the laser on the deer and the sight will display the dot, which you align with the place on the deer you want the arrow to hit? No more guessing the distance.
Minimizing the guesswork maximizes the success.
You got it!
To cumbersome for hunting, just my feedback. Not being negative just to large and awkward for where a lot of us hunt. Maybe Burris will take this feedback and make a smaller package.
It looks like 5 lib sight on 4 lib bow
It only weighs 17 oz - Aircraft Grade Aluminum www.burrisoptics.com/bowsights/oracle
Not easy to set up!! Look at the fast eddie. I thought it was gonna be hard. Nope much easier than all this PhD stuff
How much does this cost?
I’ll pay you double that to not make me do this.
the old fucking dot doesn't blinking when I press the down button! why??
And you see Burris won't comment on issues people post. They care about selling the sight. Period.
Once again , tec is is taking archery into a place where talent is less important and you dont have to pratice to get skilled
Quite far from the truth. These in fact require quite a bit of extra practice. Extra factors come into play at these extended ranges and without proper fundamentals and practice at these ranges you'll be sending arrows all over the place.
What if that big buck rolls in breathing steam out of his mouth and his nose sees the laser and then runs off I'm not taking No chances site too much money anyhow shoot fine without it
One thing about the archery market -- you get plenty of choices to find the exact setup you want.
The Oracle won't be for everyone.
But I would point out that it does NOT have a visible laser. It's a rangefinding laser beam, which are totally invisible.
@@BurrisOpticsCompany So that visible laser is just for sighting in? Or can you switch it on at random times just to mess with your buddies too?
@@GrizzAxxemann The visible laser is just for initial alignment and sighting in. It is then removed from the sight, and can easily be used to tease your cat or mess with your buddies.
@@BurrisOpticsCompany Just the answer I was looking for. It's just a shame that my bow is only worth half as much (in Canadian dollars) as the sight. Ah well. Get good with what I have then I can upgrade to the nice high end bow and justify a $1300CAD sight. I already know it's good kit, since the rifle scopes I have have yet to fail me.
I imagine this will be illegal in many states for taking deer....but given the fact certain crossbows are now allowed, I suppose anything will soon be the norm.........
You are correct. There's some more info on our website (www.burrisoptics.com) about where it's legal. And as with all game rules, it can get confusing, so make sure to check with your local departments.
@@BurrisOpticsCompany Thanks for the info!!
It's ok sights
too complicated for an old guy like me.
I'm in my mid 40's and not tech savvy. It really wasn't hard to set up. It is really cool not having to use a range finder when the deer is coming in on you.
Burris, you tried fixing something that wasn't broken. That's the mistake
Gotta be a computer expert to set the thing up. No thanks
Who is going to strap that monstrosity thing on their bow
The several thousand people sending us pictures of successful hunts.
You really think a deer will stand that long. To wait for that piece of shit to turn on and set.
Actually yes. The sight ranges super fast. I had a buck moving and I kept having to range him. I stopped him with a " mack". Shot was true, deer in the truck.
This is when hunting is no more hunting lasers and crap you dont need. Just go to bucher shop lol. Forcing technology in everything , like hunting in video game. F... this !!!
with that kind of talk i expect you to be hunting with a hand made bow from 18000bc?
Um you do know that modern bows are made with Auto Cad, polymers, and cutting edge science don't you? Hunt with your hands and teeth if you really want to get rid of technology. Run the deer down and strangle and bite them to death like the first cavemen.
@@uzomad hunt this🖕