Hello,OfOz I'm so glad you enjoyed my video! And thank you for your kind comments I will continue to strive to make quality videos. Thank you See you again
Hello beautiful Earthling. Thank you for your patronage of my video. And thank you for your sincere and wonderful comments. Friendship from Japan...Tachi
Hasta ahora no hay nada imposible para usted. Es muy entretenido verle trabajar, estoy a la expectativa viendo cada paso hasta llegar al producto final y sorprenderme gratamente. Un abarazo
Hola,mamcora Muchas gracias por apoyar mi video. Y siempre me conmueven los amables comentarios. Estoy resolviendo mis problemas triviales poco a poco y preparando mi ambiente de carpintería. Gracias
Bonjour,Norbert Merci d'avoir toujours regardé Ce projet a été le premier à le faire maintenant! Mais je suis très en sécurité. Merci pour ton gentil commentaire À bientôt
Great video Sir! I am a day late watching it this week as I have been after the renovations, and starting new chickens, etc. Always something on a farm.
Hello,Nik Thank you for always watching my video And thanks for the wonderful comment It seems that innovation is progressing, it is wonderful, It's nice to imagine you feeding a chicken, Thank you
Very nicely done mate 👍🏽 Zero clearance plate make life so much easier at times, always good to have one or more on hand when needed.👌🏽 I've seen some guys make spare splitters out of old saw blades.
Hello,Vasiliy Thank you for always watching my video And thanks for the nice comment This is a laminated wood I made of oak wood, I like the natural feel. Thank you
@@TachiOhyo56 доброго времени суток Вам,мастер.✊. За Ваши пожелания хочу сказать Вам.."Зур итеп рахмат сезге" это на моём родном языке.)) А по русски значит- большое Вам спасибо. С глубоким уважением к Вам,и Вашей семье из России.✊
Hello,David Thank you for always watching my video And thanks for the wonderful comment This is a laminated wood I made of oak wood, I also agree with you, I like the feeling of nature. Thank you
bonjour jean Merci pour vos salutations polies J'ai essayé le dégagement zéro avec certains matériaux, celui en bois dur est peut-être le meilleur. Merci et amitié du Japon
Hola maestro,espero que se encuentre bien usted y su familia. Me ha gustado mucho el video, sobretodo el ajuste que le aplico a la máquina un trabajo realmente interesante y muy bueno, un saludo.
Hola,jose Muchas gracias por apoyar mi video. Y siempre gracias por sus amables comentarios. Poco a poco voy preparando mi ambiente de carpintería. Te deseo salud y felicidad desde Japón. Gracias
Notice to my dear friend I had a reason to delay my reply to my dear friends Please forgive me, I will reply at a slow pace. Aviso ao meu querido amigo Eu tinha um motivo para adiar minha resposta aos meus queridos amigos Por favor, perdoe-me, responderei em ritmo lento. Hinweis an meinen lieben Freund Ich hatte einen Grund, meine Antwort an meine lieben Freunde zu verschieben Bitte vergib mir, ich werde langsam antworten. Avviso al mio caro amico Avevo un motivo per ritardare la mia risposta ai miei cari amici Per favore, perdonami, risponderò a passo lento. Обратите внимание, мой дорогой друг У меня была причина отложить ответ моим дорогим друзьям Пожалуйста, прости меня, я отвечу в медленном темпе. Aviso a mi querido amigo Tenía una razón para retrasar mi respuesta a mis queridos amigos Perdóname, responderé a un ritmo lento. Avis à mon cher ami J'avais une raison de retarder ma réponse à mes chers amis Veuillez me pardonner, je répondrai lentement. 私の大切な友へお知らせ 私にある事情がありました、親愛なる友への私の返信が遅れることを お許しください、私はスローペースで返信します。
Olá, Orazio Senti infinita cura e salvação nos seus breves comentários, sou profundamente inspirador e tenho orgulho de apresentar seus comentários à minha família, obrigado!
You did it! I was sure of that. This is one of the first empowerments to do for your table saw. A very fine work. Waiting for next...curiously. Have a good day, friend.
Hello,Giuseppe Thank you so much for supporting my video And thanks for the wonderful comment This plate created strength first, Next, we will repair a large sled. Perhaps! Thank you See you
Olá amigo Valter. Estou feliz por ter conhecido você depois de tanto tempo. Estou ficando sem ideias para fazer com madeira! Mas pretendo voltar algum dia, Tachi🇧🇷🇯🇵
Hello,Fredrik Thank you for always watching my video And thank you for your nice comment. From now on, safety is increased by one. safety first! Thank you
Hello,tionolo Thank you for always watching my video The first requirement of this project is material strength! And some structure and challenges remained. Thank you for your nice comment See you
Parabéns, sempre muito competente nos trabalho e quanta habilidade e carinho no que faz! Tenho uma igual a essa DW 745, qual disco da Makita que posso substituir para trabalhar com madeira maciça? Abraço aqui do Brasil 🇧🇷
Olá,Valter Muito obrigado por apoiar o meu vídeo E obrigado por seus amáveis comentários Sim, você pode substituir o disco Makita e usá-lo com madeira maciça Estou resolvendo meus problemas triviais aos poucos e preparando meu ambiente para trabalhar madeira. Obrigada
Bonjour,Dominique Merci d'avoir regardé ma vidéo Oui, c'est très sûr et pratique car je coupe souvent des planches minces. Profitons du travail du bois avec vous! Je vous remercie À bientôt
Thank you for this, now I need to go make some for my own swirly blade of death !!! I've been meaning to do this for some time so I think this will be my next project. I've got a Ryobi however that's simply a pain in the behind to do anything with lol.
Hello, Thank you so much for supporting my video And always thank you for your wonderful comments. It is very convenient because I often cut thin parts I am solving my trivial problems little by little and preparing my woodworking environment. Thank you
Hello,Willy Thank you for watching my video I replaced it with a Makita blade and at the time I installed the change ring by mistake! ! I understand the cause, so there is no problem. Thank you for your kind comments
Hello Mariano I met you again. The cause of the vibration of the saw blade was the wrong ring for changing the inner diameter! Thank you for coming See you
@@TachiOhyo56 He said it ironically, meant as a compliment about the fine material you used. It is very difficult to successfully use irony in a medium which lacks "body language" when those communicating are not from the same cultural backgrounds.
Hello,eejuice Thank you for your kind information I am an old man ignorant of the world of the Internet and foreign cultures. I always want to appreciate and appreciate user comments. We sincerely thank you for your wonderful information.
@@TachiOhyo56 eejuice explained it perfectly! It is always strange to see piece of a nice wood as a part of some machine. It is nicer to see it as a part of some item. To us anyway.
@@TachiOhyo56 *Makitas* honor has been reestablished. ;-) That looked very scary. By the way - I'm about to build your 45°/90° quick jig for my DeWalt 7485. I laminated two pieces of plywood together, but I'm afraid that was just a little over the top. My rough board is now 2,33 inches [6 cm]. Well - wish me luck, Tachi.
Hello,EDDY Thank you so much for supporting my video And always thank you for your nice comments. As you say, there are so many RUclips creators of DeWALT users! ! Hurry up and join us. Thank you
Olá andre Obrigado por ter vindo ao meu workshop A lâmina fabricada no Japão tem um diâmetro interno de 24,5 mm! Você precisa de um anel de 15,9 mm que atenda aos padrões americanos! !! Estou ansioso para trabalhar com você no futuro Gratidão e amizade do Japão
zero clearance insert + rithing knife! What happened to the gray PVC zci? Did it get painted DeWalt yellow?! Excellent as always; a true Woodworking Sensei!
Hello,Ralph Thank you for always watching my video And thanks for the wonderful comment I also liked the gray PVC beautifully, I painted it in yellow and regretted it! Thank you
Привет,Сергей Большое спасибо за поддержку моего видео Спасибо за ваш добрый комментарий на днях. На самом деле, я пошел в больницу для тщательного осмотра, первый прошел, завтра второй, удачи Здоровья вам и счастья из Японии. Спасибо
Привет,victor Спасибо, что всегда смотрите Я готовлю свою деревообрабатывающую среду в медленном темпе. Конечно, я не буду менять свой стиль Спасибо за ваши добрые комментарии
Hello,Cahit Thank you for always watching I removed the standard blade and put on another manufacturer's blade, it didn't look right! ! It turned out in a subsequent check. Thank you for watching over me
Hello Andriesse Thank you for coming to my workshop My impression is that hard oak wood is suitable. There is no problem with each material, but my concern is the deflection of the board! A structure that does not move due to pressure from above is required. Thank you very much
I have a Dewalt DW745 (Type 4) myself. I wanted to make sure the insert wouldn't move under use, so I secured the back with a small piece of flat bar (repurposed piece of the bar of a quick clamp that the handle broke off of). On the front, where it is normally locked, I drilled and tapped an M4 threaded hole in the support /locking tap for a countersunk screw. It is still a work in progress though. As imperial dimensions are a bit hard to come by here in Denmark, the insert was made from 12mm formwork plywood with small patches of duct tape as spacers. Next on my list is to make threaded holes for M5 set screws and somehow secure the locking screw with a clip, as the only thing holding it in the insert when not in use, is the patches of tape on the bottom. What model is your saw? It looks like a DW745, but the blade size don't add up. It usually uses 10"/254mm blades. Oh, and what made you swap the Makita for the Dewalt?
Hello Henrik san Thank you for your polite comments. My Dewalt is DW745, the reason I abandoned Makita is that the blade is not parallel to the fence, and it's very difficult to adjust. You can't make a zero clearance plate. The top plate of the table is not flat. After changing to DewaltDW745, my woodworking has become a lot of fun, it meets my needs, my favorite.
@@TachiOhyo56 It sure is a good little saw. I originally looked at a Bosch GTS 635-216 myself when it was on sale, but after seeing it "in the flesh", I found the fence rails way too flimsy. The rack-and-pinion rails of the Dewalt combined with 250W extra made the choise obvious. :)
Hola,ff ff Gracias por mirar mi video Lo siento, ¡no viste mi propósito! Es solo un video hecho con los 3 tipos de materiales que tenía. Como resultado, estaba completamente satisfecho con la fuerza. Gracias por sus amables comentarios.
Hello Ohyo, you did a great job!!! Just a simple question: how did you fix the locking system? I didn't see any, in your pieces. Thanks for your inspiration!
Hello,Francesco Thank you for always watching my video And thanks for the nice comment At first, I planned to make the protrusions the same as the original, but I abandoned, I plan to attach two horns with nails or screws in the near future. Thank you See you
Hello,Pascal Thank you for always watching my video The reason why I made it with 3 kinds of materials is the strength, it takes a great deal of force when cutting! And as you said, I was aware of the diameter of the blade. Thank you
Ciao,fabrizio Grazie per aver sempre supportato il mio video E grazie per i tuoi gentili commenti Stiamo risolvendo piccoli problemi a poco a poco Grazie a te
Hello,Tim Thank you for always watching my video And thank you for your comment In my country, Japan, there are no restrictions. Very convenient. Thank you See you
Hello, Jimmy Thank you for coming to my workshop DeWalt is not the only one that does not have a zero clearance insert as standard equipment. The reason is to reduce the cost by using both 90 degrees and 45 degrees! That's why many people make homemade zero clearance inserts. Thank you See you
Hello,ssschuh Thank you for watching my video and nice comment At this time I replaced the blade with Makita, I could not install it correctly, which caused the blade to rage and widened the gap between the plywood and the blade. Thank you See you
Hello,J C Thank you for always watching my video And thank you for your comment There are several spare blades for Makita, which can be used with the conversion ring from 25.4 to 15.9. Thank you See you
какая модель станка ? Вы ставите 216 диск . у меня DeWALT 7485 ? но диск 210. which machine model? You put in disc 216. I have a DeWALT 7485? but disk 210.
Привет андрей Спасибо за просмотр моего видео Я купил DeWalt 745, инструмент низкого уровня. Я использую лезвие 210 потому, что оно может плавно резать твердую древесину. Спасибо
@@TachiOhyo56 я своей пилой доволен , даже со штатным диском рез очень чистый , а дуб 50-ку режет как масло . 5500 об .мин. стол идеально ровный , правда немного маловат , но не беда .
Hello Lance Thank you for coming to my workshop. And thank you for your kind comments. I am an old man who enjoys woodworking every holiday, and I also like to spend time on woodworking. Thank you Lance ・ ・ ・ ・ Tachi
Olá,Ranulfo Muito obrigado por apoiar o meu vídeo Para dizer a verdade, o erro de precisão de suas várias partes agora é visível para meus amadores, então mudei para uma nova ferramenta, Makita cuida dos amigos locais. Eu vou usá-lo. Obrigado por seus amáveis comentários
Hi John Thank you for watching my video The reason is that the original insert has a large gap and is not tight! I took a pattern with a pencil and scraped the outside of the pencil mark. Thank you for your comment See you
@@TachiOhyo56 Makes perfect sense...very nice job on the insert as well as some of your other videos. I just discovered your channel this morning. cheers...
Всем привет! Не совсем понятно, объясните пожалуйста зачем разные вкладыши ? Просто я тоже заинтересовался деревообработкой, буду рад пояснениям и советам!
@@Homeworkshop_Evgeniy заводской при активном использовании - вообще не жилец. А это просто примеры, как из подручного материала изготовить комплектующую. У кого, что под рукой (в быту - ЧПР) - из того и делать. На мой взгляд лучше всего - армированный текстолит. А это популярно показан технологический процесс. Решпект мастеру за хлопоты!
Hello Caraku Welcome to my workshop. I'm sorry, Google Translate doesn't work well for your comment, please reply again with a different expression, please.
Hello, Mika Thank you for watching my video And thank you for your comment I always try and error, the purpose of these 3 materials is testing, especially strength and cost ... strength is all 3 passes, cost is of course veneer Me and you are woodworkers, Thank you See you
@@TachiOhyo56 the 7492 have a 10"blade and i don't exactly know the measurements of my insert plate in inch,but the thicknes is 1/2 " or 12,5mm.i'm from germany and we use the metric system.i will make a template if i have some 1/2" plywood in my scrapbox.unfortunately here in germany dewalt don't have throat plates in the assortment here.
Olá,Alan Obrigado por assistir meu vídeo E obrigado pelo bom comentário, Sim, é contraplacado de 10 mm, 10 mm pode ser feito sem ajuste. Obrigada Até mais
![Natanael Cano - Amor Eterno [Official Video]](http://i.ytimg.com/vi/EO4prCs6WpM/mqdefault.jpg)
![KSI - Thick Of It (feat. Trippie Redd) [Official Music Video]](http://i.ytimg.com/vi/At8v_Yc044Y/mqdefault.jpg)
Pretty easy to do with all the fancy machinery!
Hi Jeff.
Thank you for watching my video and for letting me know, Tachi.
I always enjoy watching your videos. Always good ideas, fine workmanship, and calming to watch. Thankyou.
Hello,OfOz
I'm so glad you enjoyed my video!
And thank you for your kind comments
I will continue to strive to make quality videos.
Thank you
See you again
Fantastic job. Loved watching it from start to finish.
Hello beautiful Earthling.
Thank you for your patronage of my video.
And thank you for your sincere and wonderful comments.
Friendship from Japan...Tachi
Hasta ahora no hay nada imposible para usted. Es muy entretenido verle trabajar, estoy a la expectativa viendo cada paso hasta llegar al producto final y sorprenderme gratamente. Un abarazo
Hola,mamcora
Muchas gracias por apoyar mi video.
Y siempre me conmueven los amables comentarios.
Estoy resolviendo mis problemas triviales poco a poco y preparando mi ambiente de carpintería.
Gracias
Bonjour, encore une excellente vidéo et un super résultat....Un seul mot....Bravo👏👍👍! Merci pour ce partage. Norbert (France)
Bonjour,Norbert
Merci d'avoir toujours regardé
Ce projet a été le premier à le faire maintenant!
Mais je suis très en sécurité.
Merci pour ton gentil commentaire
À bientôt
Very instructive, very enjoyable, very good work! Thank you!
Hello,Mark
Thank you for always watching
My woodworking environment is changing slowly.
Thank you for your kind comments
Great video Sir! I am a day late watching it this week as I have been after the renovations, and starting new chickens, etc. Always something on a farm.
Hello,Nik
Thank you for always watching my video
And thanks for the wonderful comment
It seems that innovation is progressing, it is wonderful,
It's nice to imagine you feeding a chicken,
Thank you
que trabajo mas bonito , cuánto me gustario estar cerca de usted para aprender con su saviduria😍💕
Hola,Francisco
Gracias por sus amables y maravillosos comentarios.
Tú y yo somos muy buenos carpinteros.
Gracias
Nos vemos
Very nicely done mate 👍🏽
Zero clearance plate make life so much easier at times,
always good to have one or more on hand when needed.👌🏽
I've seen some guys make spare splitters out of old saw blades.
Hello,Bill
Thank you for always watching my video
And thanks for the nice comment
I will also make a spare splitter.
Thank you mate
Отличные видео , уважаю, спасибо.
Привет,Николай
Спасибо, что всегда смотрите
Моя среда для деревообработки медленно готовится.
Ваши добрые комментарии ободряют меня.
Nice work! Oak is perfect material!
Hello,Vasiliy
Thank you for always watching my video
And thanks for the nice comment
This is a laminated wood I made of oak wood, I like the natural feel.
Thank you
Как всегда,всё хорошо !👍 Спасибо Вам,за интересные видео. Удачи.
Здравствуйте, Альберт
Спасибо за ваши добрые комментарии
Я желаю вам счастья из Японии.
@@TachiOhyo56 доброго времени суток Вам,мастер.✊. За Ваши пожелания хочу сказать Вам.."Зур итеп рахмат сезге" это на моём родном языке.)) А по русски значит- большое Вам спасибо. С глубоким уважением к Вам,и Вашей семье из России.✊
Exelente.! muy bueno..Lo voy a poner en práctica.! Saludos desde Argentina..Mnes
Hola,Jorge
Gracias por mirar siempre mi video.
Y gracias por el maravilloso comentario.
Disfrutemos juntos la carpintería
Gracias
Nos vemos
@@TachiOhyo56 tengo una sierra igual
I like oak one best. I like you saw very good quality. Thank you for sharing
Hello,David
Thank you for always watching my video
And thanks for the wonderful comment
This is a laminated wood I made of oak wood,
I also agree with you, I like the feeling of nature.
Thank you
super le zero clearance salutations et grand merci pour tout ce que vous montrez
bonjour jean
Merci pour vos salutations polies
J'ai essayé le dégagement zéro avec certains matériaux, celui en bois dur est peut-être le meilleur.
Merci et amitié du Japon
簡単に作っていらっしゃいますがゼロクリアランスは重要なだけに素人には難易度が高い壁です。自分も何枚か挑戦していますが100点と言える物は未だ作れずにいます。天板と差があって段差になってしまえば意味が無いですし、水平にピタリとするには相当難易度が高い作品と言えますね。ローマは一日にして成らずを心に、ミスが己を育てる！完成品に納得行かないことはレベルアップの証！と信じて精進します。いつも丁寧なコメントをありがとうございます。もちろんそれは大変嬉しいですけど、あなたの大ファンと認めて頂けるのであるならば、是非とも後回しにしてくださいね。自分は「読んだよ！」のハートマークで充分です。今週も素晴らしい動画をありがとうございました。その出来栄えにすっかり降参しました。(笑)
こんにちは、ヨウジさん
このDeWALTのゼロクリアランスのプレートは形状や規格がかなり合理的で比較的簡単に設計されます。
今までのがとてもてこずったのでとても楽でした。
とは言っても完璧ではありません、手を抜いた箇所もいくつかあります、
こんなふうに後になって反省しています。私の今の状況が落ち着いたらまた再び研ぎ澄まされたビデオを作ります。多分！
いつも親切なコメント有り難うございます。
お見事‼😻
有り難うございます＾＾
Che dire sei sempre una fonte di ispirazione per tutti quanti 👏👏
Ciao Riccardo.
Grazie per aver apprezzato il mio video. E grazie per i tuoi meravigliosi commenti.
Отлично, впрочем как и всегда) 👍👌.
Привет,Александр
Большое спасибо за поддержку моего видео
И всегда спасибо за ваши замечательные комментарии.
Ficou ótimo, é sempre bom ter opções e melhorar nosso trabalho e segurança.
Olá,Ubiratan
Obrigado por sempre assistindo
E obrigado por seus amáveis comentários
Hola maestro,espero que se encuentre bien usted y su familia.
Me ha gustado mucho el video, sobretodo el ajuste que le aplico a la máquina un trabajo realmente interesante y muy bueno, un saludo.
Hola,jose
Muchas gracias por apoyar mi video.
Y siempre gracias por sus amables comentarios.
Poco a poco voy preparando mi ambiente de carpintería.
Te deseo salud y felicidad desde Japón.
Gracias
Полезное видео, приятно такое смотреть!
Здравствуйте Александр
Спасибо за постоянную поддержку моего видео
Теперь вы можете делать безопасную работу.
Спасибо за ваш хороший комментарий
Buenos complementos ,te felicito, y gracias por compartirlo, abrazo.
Hola,norberto
Muchas gracias por apoyar mi video.
Y siempre gracias por tus lindos comentarios.
Lo primero que debes hacer por seguridad
Gracias
Really amazing work, my friend! Well done! 😃
Stay safe there with your family! 🖖😊
Hello,MC's
Thank you for always watching my video
And thank you for your kind comments,
I wish you happiness.
Que puedo decir , un estupendo trabajo😍😍
Hola Francisco
Te lo digo gracias
Great video, as always ! 👌 👍 👍
Greetings from Austria, Leo 🙋♂️
Hello Leo
Thank you for coming to my workshop again today
And thank you for the good greeting
Have a nice day
Thank you friend
See you
こんにちは！ いつものように、素晴らしい仕事です！ あなたの健康と福祉、親愛なる！
親愛なるАл эС
いつも親切なコメントに感謝します。
日本からあなたの健康と幸せを祈ります。
Notice to my dear friend
I had a reason to delay my reply to my dear friends
Please forgive me, I will reply at a slow pace.
Aviso ao meu querido amigo
Eu tinha um motivo para adiar minha resposta aos meus queridos amigos
Por favor, perdoe-me, responderei em ritmo lento.
Hinweis an meinen lieben Freund
Ich hatte einen Grund, meine Antwort an meine lieben Freunde zu verschieben
Bitte vergib mir, ich werde langsam antworten.
Avviso al mio caro amico
Avevo un motivo per ritardare la mia risposta ai miei cari amici
Per favore, perdonami, risponderò a passo lento.
Обратите внимание, мой дорогой друг
У меня была причина отложить ответ моим дорогим друзьям
Пожалуйста, прости меня, я отвечу в медленном темпе.
Aviso a mi querido amigo
Tenía una razón para retrasar mi respuesta a mis queridos amigos
Perdóname, responderé a un ritmo lento.
Avis à mon cher ami
J'avais une raison de retarder ma réponse à mes chers amis
Veuillez me pardonner, je répondrai lentement.
私の大切な友へお知らせ
私にある事情がありました、親愛なる友への私の返信が遅れることを
お許しください、私はスローペースで返信します。
Olá, Orazio
Senti infinita cura e salvação nos seus breves comentários, sou profundamente inspirador e tenho orgulho de apresentar seus comentários à minha família, obrigado!
Muy satisfactorio ver estos videos me gustan!
Hello,Arturo
Thank you for always enjoying my video and for your wonderful comments.
Please continue to be my supporter
Que maquina tan buena , es un juguete estupendo , como disfruta de ella 😍😍
Hola Francisco
Gracias nuevamente por sus buenos comentarios.
Disfrutaré de este juguete en las vacaciones de mañana.
You did it! I was sure of that. This is one of the first empowerments to do for your table saw. A very fine work. Waiting for next...curiously. Have a good day, friend.
Hello,Giuseppe
Thank you so much for supporting my video
And thanks for the wonderful comment
This plate created strength first,
Next, we will repair a large sled. Perhaps!
Thank you
See you
Muito bom, Mestre!
Um forte e fraterno abraço do Brasil.
Olá,Hot DJ
Muito obrigado por apoiar o meu vídeo
E sempre obrigado por seus comentários maravilhosos.
Obrigado pela amizade do Japão
Am happy for you ...you buy a new table saw
....vert Nice one .enjoy IT .take care chef
Hello,omar
Thank you for your wonderful comments
Buying a new table saw for me and communicating with friends is my great happiness.
Thank you
See you
@@TachiOhyo56 enjoy your new toy ...from My side i have makita 2704 and am happy with IT .life is short we have to enjoy IT every day
Grande Tachi…, estou sentindo falta dos seus ensinamentos.
Abraço aqui do Brasil 🇧🇷 para o Amigo Tachi do Japão 🇯🇵
Olá amigo Valter.
Estou feliz por ter conhecido você depois de tanto tempo.
Estou ficando sem ideias para fazer com madeira! Mas pretendo voltar algum dia, Tachi🇧🇷🇯🇵
So you did it again on your riving knife 😊. Nice, I like the PVC material.
Hi Don
Thank you for your nice comments
I agree with you, I like the PVC plate before painting it yellow.
Thank you
Ohyo56 Just wondering where you found PVC that is that flat and that thick?
BOA tarde, perfeita, eu achei que o Sr. iria deixar na cor da mesa da serra. Fantástico. Obrigado.
Olá,Luiz
Obrigado por sempre assistindo
Sim, acho que a cor da mesa estava boa!
Meu ambiente de madeira é preparado lentamente.
Obrigada
Parabéns pelo capricho!
Olá,Norimar
Obrigado por sempre assistir meu vídeo
E obrigado pelo seu comentário
Reparar isso deve fazer um bom trabalho, talvez!
Obrigado
Great idea, job well done.
Hello, John
Thank you so much for supporting my video
And always thank you for your kind comments.
As always neat and inspirational!!
Hello,Fredrik
Thank you for always watching my video
And thank you for your nice comment.
From now on, safety is increased by one. safety first!
Thank you
Thanks so much for creating this video. This is something I need to do with my saw soon and you again have given me inspiration. Thank you ohyo56 👌🏻
Hello,Ian
Thank you so much for supporting my video
Thank you for your wonderful comment
I got another safety.
Make a nice plate too
Thank you
Muy bueno ,hay varias ideas muy interesantes.
Hello,tionolo
Thank you for always watching my video
The first requirement of this project is material strength!
And some structure and challenges remained.
Thank you for your nice comment
See you
Beau travail et très précis. Bravo et merci pour le partage. Prenez soin de vous et de vos proches
Bonjour,Guy
Merci beaucoup d'avoir soutenu ma vidéo
Et je suis toujours ému par les aimables commentaires.
Je vous remercie
Come Sempre Un Gran Bel Lavoro👏👏👍 Molto Preciso ed Utile👌👌😜
Ciao,ELY
Grazie mille per aver supportato il mio video
Ho un'altra sicurezza.
Grazie per il tuo bel commento
Parabéns, sempre muito competente nos trabalho e quanta habilidade e carinho no que faz!
Tenho uma igual a essa DW 745, qual disco da Makita que posso substituir para trabalhar com madeira maciça?
Abraço aqui do Brasil 🇧🇷
Olá,Valter
Muito obrigado por apoiar o meu vídeo
E obrigado por seus amáveis comentários
Sim, você pode substituir o disco Makita e usá-lo com madeira maciça
Estou resolvendo meus problemas triviais aos poucos e preparando meu ambiente para trabalhar madeira.
Obrigada
Excellent. Thanks for sharing
Hello Weekend Warrior
Thank you for coming to my workshop again
Let's enjoy woodworking together
See you again
bonjour mon ami, bravo !!!! beaucoup plus sécurisant ces inserts 👍 👍 👍
Bonjour,Dominique
Merci d'avoir regardé ma vidéo
Oui, c'est très sûr et pratique car je coupe souvent des planches minces.
Profitons du travail du bois avec vous!
Je vous remercie
À bientôt
Thank you for this, now I need to go make some for my own swirly blade of death !!! I've been meaning to do this for some time so I think this will be my next project. I've got a Ryobi however that's simply a pain in the behind to do anything with lol.
Hello,
Thank you so much for supporting my video
And always thank you for your wonderful comments.
It is very convenient because I often cut thin parts
I am solving my trivial problems little by little and preparing my woodworking environment.
Thank you
Bonjour,
Encore et toujours une amélioration de vos outils de travail, bravo?
@+
pierre
Bonjour, Pierre
Merci d'avoir toujours regardé
Je prépare lentement mon environnement de travail du bois.
Merci pour vos aimables commentaires
Hi,
Nice work, but your blade is still wobbly.
I could not work with this problem at all.
Keep it safe.
Willy from Belgium.
😷😷😷
Hello,Willy
Thank you for watching my video
I replaced it with a Makita blade and at the time I installed the change ring by mistake! !
I understand the cause, so there is no problem.
Thank you for your kind comments
Danke für das Video 😉👍🏽
Hallo,Joe
Danke, dass du immer zuschaust
Und immer nette Kommentare
Nice insert. What caused the blade to wobble?
Hello Mariano
I met you again.
The cause of the vibration of the saw blade was the wrong ring for changing the inner diameter!
Thank you for coming
See you
That oak wood is too nice to be table saw insert ;)
Hello,
Thank you for always watching
Please tell me the reason, can't you use the one I made? Or can't you use the material?
Thank you
@@TachiOhyo56 He said it ironically, meant as a compliment about the fine material you used. It is very difficult to successfully use irony in a medium which lacks "body language" when those communicating are not from the same cultural backgrounds.
Hello,eejuice
Thank you for your kind information
I am an old man ignorant of the world of the Internet and foreign cultures.
I always want to appreciate and appreciate user comments.
We sincerely thank you for your wonderful information.
@@TachiOhyo56 eejuice explained it perfectly! It is always strange to see piece of a nice wood as a part of some machine. It is nicer to see it as a part of some item. To us anyway.
Hoje a melhor serra de bancada do mercado, ficou bom más totalmente desnecessário , ainda cortou uma peça original da máquina!!
Olá, Elexandre
Obrigado por assistir meu vídeo
E obrigado pelo seu comentário
Um vírus parou minha oficina! muito solitário····
Obrigado
Até logo
04:15 Holy cow! The brand new Makita blade is *wobbling* like that? How come..?
This event wasn't caused by Makita's blade, but by my blade installation! !!
Thank you for coming
@@TachiOhyo56 *Makitas* honor has been reestablished. ;-) That looked very scary.
By the way - I'm about to build your 45°/90° quick jig for my DeWalt 7485. I laminated two pieces of plywood together, but I'm afraid that was just a little over the top. My rough board is now 2,33 inches [6 cm]. Well - wish me luck, Tachi.
Awesome as always Mate 😁
Hello,Wojpen
Thank you for watching my video and for making nice comments.
You are my good supporter
Hallo nach 日本 (Nippon) ! wieder eine schöne & genaue Arbeit ! Dann klappt es auch mit dem Sägen von ganz dünnen Leisten besser ;- )
Hallo, Mikel
Vielen Dank für Ihre wunderbaren Kommentare
Und danke, dass du es mir erzählt hast
Wir sehen uns
Very nicely done
Hello,U
Thank you for always supporting my video
And thanks for the nice comment
Espectacular, 👌
Hola,Miguel
Gracias por mirar siempre mi video.
Y gracias por el maravilloso comentario,
Ohyo-san Nice work as always 😊👍🏼
Love your dewalt, Hope i can have one too, soon.
Hello,EDDY
Thank you so much for supporting my video
And always thank you for your nice comments.
As you say, there are so many RUclips creators of DeWALT users! !
Hurry up and join us.
Thank you
やっぱりohyoさんは最高ですね＼(^^)／
そこまで綺麗には自分は作れないので弟子入りしたいぐらいです
離島なので木材を買うと送料がバカ高いので廃材を使用しているので垂直も平面も出せないので隙間なく作るのが厳しいので綺麗な動画を見せてもらえるととても嬉しいです
ありがとうございます。
俺もマキタのテーブルソー欲しいてすね(^-^)
鎌ヶ迫さん こんにちは,
いつも親切な有難うございます。
鎌ヶ迫さんが今の現状に満足いかなくなったのは素晴らしい事なのかもしれません！
それは鎌ヶ迫さんのスキルの向上によって小さな気になる部分に目がいく様になったと言う事です。
私もそんな訳でMakita2703に限界を感じて新しいDeWALTへ変更しました。
これからも共に木工を楽しみましょう
@@TachiOhyo56 ありがとうございます。
とても励みになります(^^)
もの作りって楽しいですよね
作る前に考えるのも楽しいです。
一度でいいから直に工房を拝見してみたいですね
勉強になりそうです。
忙しい中の返信とてもありがとうございます。
Não entendi ele colocou um disco de 254mm foi isso ? Pelo de 250mm
Olá andre
Obrigado por ter vindo ao meu workshop
A lâmina fabricada no Japão tem um diâmetro interno de 24,5 mm!
Você precisa de um anel de 15,9 mm que atenda aos padrões americanos! !!
Estou ansioso para trabalhar com você no futuro
Gratidão e amizade do Japão
zero clearance insert + rithing knife! What happened to the gray PVC zci? Did it get painted DeWalt yellow?!
Excellent as always; a true Woodworking Sensei!
Hello,Ralph
Thank you for always watching my video
And thanks for the wonderful comment
I also liked the gray PVC beautifully, I painted it in yellow and regretted it!
Thank you
Приветствую!
Спасибо за видео.
Даже к dewalt можно и нужно приложить старания!
Надеюсь, что у тебя всё хорошо.
С уважением.
Привет,Сергей
Большое спасибо за поддержку моего видео
Спасибо за ваш добрый комментарий на днях.
На самом деле, я пошел в больницу для тщательного осмотра, первый прошел, завтра второй, удачи
Здоровья вам и счастья из Японии.
Спасибо
Хорошо! Вы себе не изменяете)
Привет,victor
Спасибо, что всегда смотрите
Я готовлю свою деревообрабатывающую среду в медленном темпе.
Конечно, я не буду менять свой стиль
Спасибо за ваши добрые комментарии
Sim, devagar e sempre!! Bom dia!
Olá,Luiz
Sempre obrigado por seus comentários gentis e gentis
Is there a problem with the blade? The secretion turns. The problem may also be on the motor shaft.
Hello,Cahit
Thank you for always watching
I removed the standard blade and put on another manufacturer's blade, it didn't look right! ! It turned out in a subsequent check.
Thank you for watching over me
Sehr gut 👍🏻 ⭐️⭐️⭐️⭐️⭐️
Hallo Rui
Vielen Dank für Ihre netten Kommentare
Von diesen dreien war die PVC-Platte die schönste.
Ich mag es sehr.
Danke
Do you now experience a difference in the material used / which one plywood, oak or pvc) do you like best?
Hello Andriesse
Thank you for coming to my workshop
My impression is that hard oak wood is suitable.
There is no problem with each material, but my concern is the deflection of the board!
A structure that does not move due to pressure from above is required.
Thank you very much
I have a Dewalt DW745 (Type 4) myself. I wanted to make sure the insert wouldn't move under use, so I secured the back with a small piece of flat bar (repurposed piece of the bar of a quick clamp that the handle broke off of). On the front, where it is normally locked, I drilled and tapped an M4 threaded hole in the support /locking tap for a countersunk screw. It is still a work in progress though. As imperial dimensions are a bit hard to come by here in Denmark, the insert was made from 12mm formwork plywood with small patches of duct tape as spacers. Next on my list is to make threaded holes for M5 set screws and somehow secure the locking screw with a clip, as the only thing holding it in the insert when not in use, is the patches of tape on the bottom.
What model is your saw? It looks like a DW745, but the blade size don't add up. It usually uses 10"/254mm blades. Oh, and what made you swap the Makita for the Dewalt?
Hello Henrik san
Thank you for your polite comments.
My Dewalt is DW745, the reason I abandoned Makita is that the blade is not parallel to the fence, and it's very difficult to adjust. You can't make a zero clearance plate. The top plate of the table is not flat. After changing to DewaltDW745, my woodworking has become a lot of fun, it meets my needs, my favorite.
@@TachiOhyo56 It sure is a good little saw.
I originally looked at a Bosch GTS 635-216 myself when it was on sale, but after seeing it "in the flesh", I found the fence rails way too flimsy. The rack-and-pinion rails of the Dewalt combined with 250W extra made the choise obvious. :)
interesting, but, may I ask you what for? why three materials? wich would be the use of each one?
regards
Hola,ff ff
Gracias por mirar mi video
Lo siento, ¡no viste mi propósito!
Es solo un video hecho con los 3 tipos de materiales que tenía. Como resultado, estaba completamente satisfecho con la fuerza.
Gracias por sus amables comentarios.
Hello Ohyo,
you did a great job!!! Just a simple question: how did you fix the locking system? I didn't see any, in your pieces.
Thanks for your inspiration!
Hello,Francesco
Thank you for always watching my video
And thanks for the nice comment
At first, I planned to make the protrusions the same as the original, but I abandoned, I plan to attach two horns with nails or screws in the near future.
Thank you
See you
Thanks for sharing that
Hello,Hassan
Thank you for always watching
Hello Ohyo56. Nice work. So you have 3 insert for 3 différents saw (diameter) ? Why do U make it in différents material ?
Hello,Pascal
Thank you for always watching my video
The reason why I made it with 3 kinds of materials is the strength, it takes a great deal of force when cutting! And as you said, I was aware of the diameter of the blade.
Thank you
ciao Taki .bravissimo come sempre. va bene quel banco Dewolt? ciao Fabrizio Italy
Ciao,fabrizio
Grazie per aver sempre supportato il mio video
E grazie per i tuoi gentili commenti
Stiamo risolvendo piccoli problemi a poco a poco
Grazie a te
Bom trabalho, abraço.
Olá,Antonio
Obrigado por sempre assistindo
Obrigado por seus amáveis comentários
I know in some European countries they restrict the use of Dado blades, is it the same in Japan?
Hello,Tim
Thank you for always watching my video
And thank you for your comment
In my country, Japan, there are no restrictions.
Very convenient.
Thank you
See you
Why dosnt dewalt make a zero clearance insert
Hello, Jimmy
Thank you for coming to my workshop
DeWalt is not the only one that does not have a zero clearance insert as standard equipment.
The reason is to reduce the cost by using both 90 degrees and 45 degrees!
That's why many people make homemade zero clearance inserts.
Thank you
See you
Very precise work. I wonder why the scary saw oscillation when cutting the plywood piece.
Yes, what is happening there?
Hello,ssschuh
Thank you for watching my video and nice comment
At this time I replaced the blade with Makita, I could not install it correctly, which caused the blade to rage and widened the gap between the plywood and the blade.
Thank you
See you
Update your DeWalt with a Makita blade? 😁Nice work.
Hello,J C
Thank you for always watching my video
And thank you for your comment
There are several spare blades for Makita, which can be used with the conversion ring from 25.4 to 15.9.
Thank you
See you
какая модель станка ? Вы ставите 216 диск . у меня DeWALT 7485 ? но диск 210. which machine model? You put in disc 216. I have a DeWALT 7485? but disk 210.
Привет андрей
Спасибо за просмотр моего видео
Я купил DeWalt 745, инструмент низкого уровня.
Я использую лезвие 210 потому, что оно может плавно резать твердую древесину.
Спасибо
@@TachiOhyo56 я своей пилой доволен , даже со штатным диском рез очень чистый , а дуб 50-ку режет как масло . 5500 об .мин. стол идеально ровный , правда немного маловат , но не беда .
Or just buy one on Etsy for $18+ and save a whole bunch of effort
Hello Lance
Thank you for coming to my workshop.
And thank you for your kind comments.
I am an old man who enjoys woodworking every holiday, and I also like to spend time on woodworking.
Thank you Lance ・ ・ ・ ・ Tachi
What is your opinion on the saw?
Hello Errit
Thank you for coming to my video
I am very happy with this saw.
The number one table saw I have ever used
Thank you
Mas porque ele fez outras se a que tinha era boa ????
Olá,Ranulfo
Muito obrigado por apoiar o meu vídeo
Para dizer a verdade, o erro de precisão de suas várias partes agora é visível para meus amadores, então mudei para uma nova ferramenta, Makita cuida dos amigos locais. Eu vou usá-lo.
Obrigado por seus amáveis comentários
4:38 what kind of glue did you use?
Hello Slav
Thank you for watching my video
This is an instant glue.
No lock to stop the plate from rising?
Hello, Ian.
Thank you for watching my video.
It's in the storeroom, maybe! But I don't like that part.
Thank you for coming.
ライビングナイフ切っちゃってる‼︎
豪快だ🤣
私はチキンなので切断する度胸はありませんでした。
そっか、これ内径変換リングで国産ブレード使えるんですもんね。真似しよ。
それとOhyoさんの身に何かあったようで心配です。大丈夫ですか。
こんにちは。
ライビングナイフ、意を決して切っちゃいました！
いざとなったら再生します。
そうです、いまだで使った、マキタ用の内径のブレードのストックがあるので交換リング25.4→15.9を使いました。
是非お試しください。余談ですが、このDeWalt私が買った時よろ相当値上がりしました！！・・・よかった〜〜！
わたくし先日から腹が痛くて医者に行ってきました、今日は検査日です、今から行ってきます。
心配していただき、有り難うございます。
ではまた次の動画でお会いしましょう。
Curious...why did you use the original insert as your template? Were you concerned over damaging it?
Hi John
Thank you for watching my video
The reason is that the original insert has a large gap and is not tight! I took a pattern with a pencil and scraped the outside of the pencil mark.
Thank you for your comment
See you
@@TachiOhyo56 Makes perfect sense...very nice job on the insert as well as some of your other videos. I just discovered your channel this morning. cheers...
По русски - это три П: Просто, Понятно, Полезно.
Здравствуйте Сергей
Спасибо, что всегда смотрите мое видео
Понятно! Удивительно!
Спасибо за хороший комментарий,
Всем привет! Не совсем понятно, объясните пожалуйста зачем разные вкладыши ? Просто я тоже заинтересовался деревообработкой, буду рад пояснениям и советам!
@@Homeworkshop_Evgeniy заводской при активном использовании - вообще не жилец. А это просто примеры, как из подручного материала изготовить комплектующую. У кого, что под рукой (в быту - ЧПР) - из того и делать. На мой взгляд лучше всего - армированный текстолит. А это популярно показан технологический процесс. Решпект мастеру за хлопоты!
blade looks like its wobbling.
Hello MC
Thank you for watching my video.
Yes, only then the blade trembled, then quickly corrected.
Perfection
Hello,Anthony
Thank you so much for supporting my video
And always thank you for your wonderful comments.
Nice :)
Ciao,Zio
Grazie per aver sempre guardato il mio video
E grazie per il bel commento
Muito bom
Olá,gonçalo
Obrigado por assistir meu vídeo!
E obrigado pelo bom comentário
Vou continuar me esforçando para fazer bons vídeos.
Obrigado
Até mais
what's actually size diameter arbor Sir?
Hello Caraku
Welcome to my workshop.
I'm sorry, Google Translate doesn't work well for your comment, please reply again with a different expression, please.
@@TachiOhyo56 how many arbor holes in mm??
@@purboid
Which hole is "arbor holes"? A hole for hooking your finger?
I'm sorry, ignorant!
@@TachiOhyo56 I mean holes axis of blade
@@purboid
DeWalt genuine blade is 16mm
It took time to solve it,
see you
Why did you meade 3 ?
Hello, Mika
Thank you for watching my video
And thank you for your comment
I always try and error, the purpose of these 3 materials is testing, especially strength and cost ... strength is all 3 passes, cost is of course veneer
Me and you are woodworkers,
Thank you
See you
do you have the dwe 7492 or another model
Hello duczman
Thank you for coming to my workshop
And thank you for your comment
I don't have information on another model, sorry.
Thank you
@@TachiOhyo56 hi,i asked if u have the dwe 7492,because thats the table saw i have and if this throat plate also fit it.
@@duczman76
Hello
My table saw is DW745, the standard is the same as Dwe 7492, maybe! !!
@@TachiOhyo56 the 7492 have a 10"blade and i don't exactly know the measurements of my insert plate in inch,but the thicknes is 1/2 " or 12,5mm.i'm from germany and we use the metric system.i will make a template if i have some 1/2" plywood in my scrapbox.unfortunately here in germany dewalt don't have throat plates in the assortment here.
👍
Привет,ЛЕВША
Спасибо за просмотр моего видео
Вы и я оба любители деревообработки!
Спасибо
Увидимся
@@TachiOhyo56 буду рад подписке на мой канал!
👍
おつかれさまです
新しい道具を ああしよう こうしようと
形になっていくといいですね
どこまでバージョンアップしていくのでしょうね
ｗｗｗ
こんにちは、
さすが、いっぱちさん、それがこれからの私のやるべき事です。
しかし、過去の既に済ませた動画とダブりますのです、動画にできない物もあります・・・
できるだけ私にとっての理想に近づけるかです。
これからも気を引き締めて安全第一の遂行していきます。
有難うございました。
❤️
Hallo,Michael
Vielen Dank, dass Sie sich mein Video immer angesehen haben❤️
Compensado (plywood) de 10 mm?
Olá,Alan
Obrigado por assistir meu vídeo
E obrigado pelo bom comentário,
Sim, é contraplacado de 10 mm, 10 mm pode ser feito sem ajuste.
Obrigada
Até mais
@@TachiOhyo56 Ótimo! Vou fazer na minha dw745
1
Hello,KM
Thank you for always watching my video
And thank you for giving me one
Let's enjoy woodworking together
Thank you
See you