So is the preloading bolt on the follower block necessary? I have an old model that I converted to hydraulic, but it seems so slow. I've got a 10k psi electric pump that I've ran on a one shot bender that was pretty fast and running it on this with a 10 ton team instead of 15, it takes a minute or two to make the bend. It also deforms the tube a little more than I was expecting. I'm sure it's operator error, but looking at videos, it looks identical to my setup.
Tube deformation is likely linked to the size/wall thickness of said material when matching it to the die being used. give us a call to see if there is a better die for the material you are bending 641.628.3860. As for the hydraulics you are using, its hard to say if we didn't supply the system but we can try to help you ensure you have the right parts so just talk to our sales staff and they can try to help.
Hey mate could this bend 16mm OD 5/8" x 1.5mm ss 316 19mm OD 3/4" x 1.5mm ss 316 25.4mm OD 1" x 1.5mm ss 316 31.8mm OD 1 1/4" x 1.5mm ss 316 38.1mm OD 1 1/2" x 1.5mm ss 316
Here is a link to our website with all of the metric sizes available for this machine. let us know if you have any more questions and we'll gladly get you the information. www.trick-tools.com/Pro_Tools_105_Series_Metric_Round_Tube_Dies_782
What are the sizes you can bend?
Can this be use for rigid electrical conduit ?
I'm looking for a used tubing bender. I like this one very much. Does anybody have this bender used for sale? Jim.
What was the wall thickness of this pipe
this was a demo in 1.5 inch x .090 wall. but these machines can do a maximum of 2 inch x .188 wall
I would like to purchase one price
Why does the pointer not start at zero?
It is adjustable and needs to be set at the beginning of the bend for tracking degree of bend.
Where do you position the weld seam?
Typically the weld seam is placed on the inside of the bend whenever possible.
Is it possible to do 180 bends on these?
yes
So is the preloading bolt on the follower block necessary?
I have an old model that I converted to hydraulic, but it seems so slow. I've got a 10k psi electric pump that I've ran on a one shot bender that was pretty fast and running it on this with a 10 ton team instead of 15, it takes a minute or two to make the bend. It also deforms the tube a little more than I was expecting. I'm sure it's operator error, but looking at videos, it looks identical to my setup.
Tube deformation is likely linked to the size/wall thickness of said material when matching it to the die being used. give us a call to see if there is a better die for the material you are bending 641.628.3860. As for the hydraulics you are using, its hard to say if we didn't supply the system but we can try to help you ensure you have the right parts so just talk to our sales staff and they can try to help.
Hi. Looking to upgrade a hand operated bender. What kind of hydraulic sylinder is that? Do you sell it separately?
we do sell un upgrade kit. give us a call and we can make sure its the right setup for you. 1877.van.sant
What was the wall thickness of that pipe?
.120 wall
Is it possible to bend square tubing on it?
@@WF007 just have to buy the square die for the size you need
Hey mate could this bend
16mm OD 5/8" x 1.5mm ss 316
19mm OD 3/4" x 1.5mm ss 316
25.4mm OD 1" x 1.5mm ss 316
31.8mm OD 1 1/4" x 1.5mm ss 316
38.1mm OD 1 1/2" x 1.5mm ss 316
Here is a link to our website with all of the metric sizes available for this machine. let us know if you have any more questions and we'll gladly get you the information. www.trick-tools.com/Pro_Tools_105_Series_Metric_Round_Tube_Dies_782
good video thanks
How much does it cost I want one ?????
How much does it cost pls I need hollow sectioned tube bender
www.trick-tools.com/Pro-Tools-MB-105HD-Hydraulic-Tubing-Bender-Deluxe-Kit-Deluxe105HD-Hydraulic-13262
@@TrickTools yeah thanks for the reply!!
Am in Tanzania East Africa mbeya region.
Do you have a supplier in Tanzania?? So that I can get it
Do you have an agent in Tanzania East Africa.