I can't get enough of Ian's customizing and creativity. The Door Concept had me thinking, why not two doors, the top opens with a sleek line across the top of the door, and the bottom does a suicide door opening instead of the door having to be one piece that rises up with the lid.
That door/ roof needs to be straight across at the bottom. It needs to match a body line. That little drop-down piece looks like an added afterthought. So you put in a big front vent with pieces of aluminum that mimic the cowl. Match that in the rear for engine and brake cooling with future Turbo inlet capabilities. You do the lower portion of the door "pocket" style. If it works, it would be amazing...
I think what you have created is beautiful and original. It does not look like a Porsche crossed with a Bugatti. You have an excellent eye for design. As a metal fabricator I would hate to try and make it out of sheet metal due to all the compound angles, but wow.
When are we All going to be able to watch Ian finish this car up ? Are you going to put the last couple Episodes on for All of us to watch . Hey Ian if you see this keep up the Awesome Work Brother your Builds are Amazing.l Really enjoy watching Your Builds. .
I was thinking about that... maybe some fins like those on the hood holding a thin bladelike spoiler in brushed aluminum! That would look awesome and tie in the two ends of the car...
Very cool . Not my car but if i may my opinion it's mine alone . I think the roof line in the rear should be dropped lower but I don't know if that would affect occupant head room . It reminds me of the new supra the added humps In the roof to accommodate for this .
Good job... I think, the door need to be open with the part of the front fender... The front fender are too long between the wheel and the door line... Congrats from Brazil!!!
Bonjour, je regarde l'émission de custom garage avec Ian roussel mais ce n'es pas en français et je ne parle pas l'anglais comment faire pour l'avoir en français merci
The only thing that is bad in this style is the door and sadly it ruins everything and should have been either full sized (to difficult) or shallow, not a Victor opening, so ironically it doesn't make the front look too long.
A car needs to be built around first the passengers comfort and position, second the engine transmission set up, third the suspension, fourth and most definite the frame to support the arrangements of one two and three if it's mid, front or rear engine, 2or4 wheel drive, then the last and least important is the body. You are doing this backwards and will end up with is a batmobile, a car that is uncomfortable to drive, difficult to service and performs poorly. You just made a Porsche with a Bugatti rearvend.
Sorry it looks like what you did..... a part here a part there a little of this a little of that....... what do you get...... a pile of garbage...... all this is...... is you taking parts off others and mixing them.....
I can't get enough of Ian's customizing and creativity. The Door Concept had me thinking, why not two doors, the top opens with a sleek line across the top of the door, and the bottom does a suicide door opening instead of the door having to be one piece that rises up with the lid.
This is the best series Ian has ever done
Holy cow, Ian you are the master!! That machine is truly amazing
Absolutely Awsome some scoops would look good on the front bonnet it may also direct some air back to the engine
@Banijay thank you for uploading these videos 👍
Ian, Victor and Neno. Amazing. Best build yet.
I’m so glad I get to watch Ian anytime I want.
watching Ian at work is like watching Jackson Pollock paint.. simply masterful!
That door/ roof needs to be straight across at the bottom. It needs to match a body line. That little drop-down piece looks like an added afterthought. So you put in a big front vent with pieces of aluminum that mimic the cowl. Match that in the rear for engine and brake cooling with future Turbo inlet capabilities. You do the lower portion of the door "pocket" style. If it works, it would be amazing...
That face said it all Ian, when victor sketching the doors bigger.. 😄😄😄😄
I love the process.. and you guys let us watch the magic.
I think what you have created is beautiful and original. It does not look like a Porsche crossed with a Bugatti. You have an excellent eye for design. As a metal fabricator I would hate to try and make it out of sheet metal due to all the compound angles, but wow.
More Ian! My favorite builder!
Looking fresh ! thanks for the upload
You guys are super smart and great guys, good luck with this channel.
Wow, ,just wow Ian!
Make the side slide in the fender like the darion does from the 60s the same time the top goes up
I am more and more convinced, that car looks like an Alfa Romeo 8C or a Disco Volante....
Love you Guys Absolutely Awesome 👍🏾 😎
Great show love it
Its crying out for a rear spoiler!
Can’t wait for the next video😊
if I was rich I would hire this guy and just tell him to let his imagination fly and build me a supercar
When are we All going to be able to watch Ian finish this car up ? Are you going to put the last couple Episodes on for All of us to watch . Hey Ian if you see this keep up the Awesome Work Brother your Builds are Amazing.l Really enjoy watching Your Builds. .
It has a very defined Porsche evoking emotion when seeing it for the first time. Pretty damn cool.
Looks like “a weird freaking thing”. I am also not feeling it!
But then I felt it at the end! Nice concept!
Beautiful 👍👍
Superb work
Esse ian e cara legal sabe fazer tudo kkkk
👍👍👍👍from france , cordialement
I like what you have done looks great
Its nice good job
You need a fiberglass chop gun to spray that buck with.
I like this car Brother!!!
RIP Dude 😢😢
Carbon fibre mold will look awesome.
Just Wow Ian. Looks awesome.
Does anyone remember the show "Viper"? This looks like Koenigsegg is doing a reboot of that show!
Snow hats with the ears. Lmao.
I think it needs a good big wing on the back
Ian you need to come up with your own badge to put on the front of it
Man - thats really nice! I think you nailed it!! Everything flows together!
That thing is lookin sLiCk !
looking good
Yes ime with you x
Congratulations! You've made a Mitsubishi 3000 GT!
New project 🏎
WOW
Gordon Murray and Christian von Koenigsegg are creating a new hypercar😃
If you have the fender bulge out the same way the quarter panel is u can get a front vent with the same door & body lines
so amazing but, if you can extend the wheelbase believe it will be perfect. Looking like d convert
e v e r y t i m e
this channel uploaded Ian Russel jobs,
it never continued the project, and show it the final result.
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Looks like it needs something to come off the back section of roof
I was thinking about that... maybe some fins like those on the hood holding a thin bladelike spoiler in brushed aluminum! That would look awesome and tie in the two ends of the car...
Maybe a thin little cool roof intake inorder to get more air to the motor like a many of super cars have
Tail pipes out the top back
Very cool . Not my car but if i may my opinion it's mine alone . I think the roof line in the rear should be dropped lower but I don't know if that would affect occupant head room . It reminds me of the new supra the added humps In the roof to accommodate for this .
Good job... I think, the door need to be open with the part of the front fender... The front fender are too long between the wheel and the door line... Congrats from Brazil!!!
Good luck at a drive thru
Could the bucket seat be put on a swivel and after the occupant gets seated it will swivel back to straight and a pin will lock it into place
It sure needs a wing !
What about an edge on top of the diffuser thing back of the hood ?
I think the rear needs a spoiler or needs to be lengthened.
With the canopy open it looks like a modded VW Karrman Gihia.
Oh man, can you publish the next one right now?
Speechless 😮 awesome 😎
Thats going to be one Bad looking car.
Holy Moly Cow 🤭
Great work. Thanks.
You are a good worker and a master of your game mate you should be very proud
1:30 szép kutyu (puppy)
Awesome build series!
Victor is a quim
Bonjour, je regarde l'émission de custom garage avec Ian roussel mais ce n'es pas en français et je ne parle pas l'anglais comment faire pour l'avoir en français merci
Get Victor to take some Yoga classes, Done.
Why not just have a short "door" that is not attached to the top ?
Porche boxer
Why cant I get this to Play?
Great job 👍🏻👍🏻👍🏻
like see you do 2024 dodge charger better then dodge new car comeing out but with a v8
Wow this is a great concept love the lines of this car hope Victor allows you to paint this as a super car should be painted
The bottom part of the door, should have stayed and opened as the roof does. Looking like an insect when opened
I know you gave her a name, but I will suggest a name that suits her, and you should just think about it (The Chunky One).
Good job.
like 1.2 K
☝️ HAVE YOU SEEN UE FIGUR MACHINE 🙋 FOR RAPID SHEET METAL FORMING
This could be the start of bigger things I think
I'm sorry, but the Mythbusters already did that with a car covered in clay with dimples in it. And the car did 100 miles on a liter of gas.
The only thing that is bad in this style is the door and sadly it ruins everything and should have been either full sized (to difficult) or shallow, not a Victor opening, so ironically it doesn't make the front look too long.
it's ugly but as long as you both like it ..... i wish i can do a custom car .... it would look much better than that
You don't even know what it takes to create a working super car so thinking you can do better is very idiotic
Great build so intresting but it looks like a big jelly mould…..boring lines sorry I’m a European and like slicker lines not boxy….🤷🏼♂️👍🏻🇬🇧🇬🇧🇬🇧
so you took a cool car and messed it up totally.
Victor needs to get on a diet..maybe he'll fit then.
A car needs to be built around first the passengers comfort and position, second the engine transmission set up, third the suspension, fourth and most definite the frame to support the arrangements of one two and three if it's mid, front or rear engine, 2or4 wheel drive, then the last and least important is the body. You are doing this backwards and will end up with is a batmobile, a car that is uncomfortable to drive, difficult to service and performs poorly. You just made a Porsche with a Bugatti rearvend.
Hey Victor I know this car is done, you still don’t have a supercar this is a Porsche boxer. It’s a chicks car that looks like a big bar of soap now😂
At least it ain't an a$$ ugly fox body, them things be depressing to look at
Looks shit to me…
Sorry it looks like what you did..... a part here a part there a little of this a little of that....... what do you get...... a pile of garbage...... all this is...... is you taking parts off others and mixing them.....
That has to be the ugliest thing Ian has built! An egg on wheels the kit car he started with looked better, just saying 🤷
This is a shameless copy of Alfa Romeo Disco Volante.
Cool car
If you don't think to well, don't think to much????