How to Replace Rear Upper Control Arm Bushings 1999-2004 Jeep Grand Cherokee
HTML-код
- Опубликовано: 7 сен 2024
- Buy Now!
New Control Arm Bushing from 1AAuto.com 1aau.to/ia/1ASM...
This video shows you how to install new rear upper control arm bushings from TRQ on your 1999-2004 Jeep Grand Cherokee.
This process should be similar on the following vehicles:
1999 Jeep Grand Cherokee
2000 Jeep Grand Cherokee
2001 Jeep Grand Cherokee
2002 Jeep Grand Cherokee
2003 Jeep Grand Cherokee
2004 Jeep Grand Cherokee
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obvY/1A...
• Pry Bar 1aau.to/o2i/1AX...
• 21mm wrench
• 10mm Socket 1aau.to/obqw/1A...
• 13mm Socket 1aau.to/obLQ/1A...
• 15mm Socket 1aau.to/obLQ/1A...
• 21mm Socket 1aau.to/oasE/1A...
• Press
• Air Chisel 1aau.to/ob8/1AX...
• 15/16 Inch Socket
• Ratchet 1aau.to/obQq/1A...
• Socket Extensions 1aau.to/obLQ/1A...
• Torque Wrench 1aau.to/oaT8/1A...
• Copper Anti-Seize
• Gloves 1aau.to/oay9/1A...
• Liquid Thread Locker
• Rust Penetrant
• Safety Glasses
• Sandpaper
• Floor Jack 1aau.to/oahX/1A...
• Hammer
• Jack Stands 1aau.to/o6k/1AX...
• Pole Jack
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.