Yes.It is as your guess. Handmade plastic washers.They may not be needed. Anyway, it is a development stage.You might discover something new.Thank you.
Very good idea ! It'll help to eliminate the main problem of the cine-cameras held by hand i.e. instability. And it is not very difficult to make by the average DIY-man.Thanks.
Ok, so I bought a ball transfer bearing like this one, but with a stiff nylon ball, which should work great. I am wondering, with your specific unit, did you add the plastic washers on the inside, or was that already in there when you bought it? My bearing just came full of tiny 1/8" bearings. probably 25 or so, maybe more. If you added the washers, what are the specs for those washers?
Thank you for your fast reply. Yet another question.... Is there any important reason for opening the Transfer Ball and reduce the number of spheres inside or you belive I can avoid to open it. I'm asking because I already destory one piece because it seems not possible to reclose it without deform the housing
How did you solder the screw to the ball? I'm trying to figure out how to do it, and even perforation it's seems not possible due the fact that the ball is in tempered steel. Any suggestion?
Tim, this is a great articulation! Are you manufacturing it? If not, perhaps you should! Is it possible to acquire the parts? Thanks very much for your inventiveness! Bravo!
Hi Tim. You could spend a parts list that you used? I'm from Brazil and here is very expensive to buy a steadicam. So this would be the best solution to a steadicam. Thank you.
Can you please provide a part list in English? For the English viewers. These things are called "ball transfer unit". If you do a google search, you can find a few places that source these.
Hi! this is really great!!! Unfortunately I can't make my own because I can't find anywhere a ball transfer bearing. Could you please tell me where to purchase this item or a similar one anyway?
@NSUHBCU The gimbal he used here is a ball transfer unit, ball rollers to move heavy objects. He either had the hole drilled with a machine and threaded it or bought a replacement grip-ball with the hole already drilled and threaded to screw in a bolt. I also made a gimbal with a ball transfer and it works much better than a universal joint, which I also made before.
Hi, I'm Pablo. I'm trying to DIY a steadycam ,and I Already make 3 steadycam,they can be use but theres no one is perfect as yours so , I hope um... I want to ask you , that can you teach me how to made a perfect as yours. Please ,I'm dispirited so sad , anyway thank you verymuch.
wow, great answer, thanks xD I contacted many ebay sellers to know if those Transfer Bearing were easy to open, they all answered me that this was just impossible. I'm still searching for the right Transfer Bearing.
@suzutav2 様
ありがとうございます。
現在はベアリング小を16粒にしています。
一昨年前はもっと少なかったような気が・・・。
何個が適切なのかいろいろ実験してみるのも面白いと思います。
感性のままにトライしましょう！
@59masher 様
ありがとうございます。うまそうでしたか？。安いパーツですが、余有るその性能。是非お試しあれ。
Yes.It is as your guess. Handmade plastic washers.They may not be needed. Anyway, it is a development stage.You might discover something new.Thank you.
Very good idea ! It'll help to eliminate the main problem of the cine-cameras held by hand i.e. instability. And it is not very difficult to make by the average DIY-man.Thanks.
Much sturdier than the u joint! where did you get the parts? Good Design!
Ok, so I bought a ball transfer bearing like this one, but with a stiff nylon ball, which should work great. I am wondering, with your specific unit, did you add the plastic washers on the inside, or was that already in there when you bought it? My bearing just came full of tiny 1/8" bearings. probably 25 or so, maybe more.
If you added the washers, what are the specs for those washers?
Thank you for your fast reply. Yet another question.... Is there any important reason for opening the Transfer Ball and reduce the number of spheres inside or you belive I can avoid to open it. I'm asking because I already destory one piece because it seems not possible to reclose it without deform the housing
Really smooth ....
Where can I pick up that gimal ?
@tuka3desu 様
ありがとうございます。
寄れる単焦点レンズを使いました。
台所の照明なので暗いんですが。
How did you solder the screw to the ball? I'm trying to figure out how to do it, and even perforation it's seems not possible due the fact that the ball is in tempered steel. Any suggestion?
Yeah, I thought about it but the internal gasket is made of plastic and it may melt causing some problems with the fluid sphere movements.
Tim, this is a great articulation! Are you manufacturing it? If not, perhaps you should! Is it possible to acquire the parts? Thanks very much for your inventiveness! Bravo!
Hi Tim.
You could spend a parts list that you used?
I'm from Brazil and here is very expensive to buy a steadicam. So this would be the best solution to a steadicam.
Thank you.
コチラを参考に私も作ってみました。
Hi,
Could you maybe post a part list, about witch parts you used?
That would be extremely usefully for building one on my own.
Thank you
where do you you find all the pieces or do you know something which look like and is all assembled ??
Can you please provide a part list in English?
For the English viewers. These things are called "ball transfer unit". If you do a google search, you can find a few places that source these.
@P1NKL1ON 「隣り合ったミニベアの逆回転」の接触。やっと分かりました。なるほどなぁ。フリーベア内の状態が見える様ですね。（凄）
摩擦が無くなるほど良いのでしょうけど、二百と数十円のパーツにこれ以上性能を求めるのも酷な事ですし。
次なる発展に期待致します。私は現状で十分に満足しています。
ｓｈｕｕｕｊｉさんの作品はよく拝見させて頂いております。カメラワークがとっても参考になります。
Hi! this is really great!!!
Unfortunately I can't make my own because I can't find anywhere a ball transfer bearing. Could you please tell me where to purchase this item or a similar one anyway?
Where can I buy all the components? Is there a online store?
why do you need to open it?
can you make the solder with the ball inside the bearing?
@NSUHBCU The gimbal he used here is a ball transfer unit, ball rollers to move heavy objects. He either had the hole drilled with a machine and threaded it or bought a replacement grip-ball with the hole already drilled and threaded to screw in a bolt. I also made a gimbal with a ball transfer and it works much better than a universal joint, which I also made before.
@P1NKL1ON さま
毎度どうも。
フリーベア単体でも十分使えるのですが、上側にもボールベアリングを使うとパンした時にふらつきにくくなったような気がします。
インチ球とM８ボルトの芯ブレが限りなくゼロに近くならないとうまくいきません。
風景は照準が定まりにくく難しいですね。被写体はもっと近い方がいいです。
中身まで改造されるとは凄いですね！！
ボールの底部を平らに削るのもありかなと思ってます。
まだトライしてませんが。
I didn't thought in that detail..
If you find one easy to open please post it here!
Can you get all those items at makeman?
Where can I get one from fella?
Please! Where i can find this item? I so need it!
google for "C-8Y"
What is the size of these balls?
hey im in England and am a amateur film maker i have a few days to make a steady cam for my next project could you help out please
do you sell this? I need one!
hola podrías poner los nombre de los materiales en español...
Привет, скажи ты нашел где то такую шаровую? Если да, помоги пожалуйста где найти такую деталь?
wow :o
where can i get one?
А ГДЕ ВЗЯТЬ ТАКОЕ?((
i love it! its wonderful this design..
これはすごい！
しかし溶接が必要ですか・・・
なにか溶接の要らない方法はないでしょうか？
GREAT JOB,THIS IS MECHANICAL ANALOGOUS FOR HUMERUS ARTICULATION IN BIOROBOTICS I WONDER IF YOU CAN USE BBS FOR AIRGUNS
Hi, I'm Pablo.
I'm trying to DIY a steadycam ,and I Already make 3 steadycam,they can be use but theres no one is perfect as yours so , I hope um... I want to ask you , that can you teach me how to made a perfect as yours. Please ,I'm dispirited so sad , anyway thank you verymuch.
cool
Man, wonderful! You should start a production.
お久しぶりです＾＾
やはりね ポイントはリング２個でミニベアの固定でしたねｗ
Ｃ－５Ｈで中心点のズレと落下防止による感度ＵＰを目指しベアリングのスペーサと同じ機能のものを
メッシュ（金網）で作ろうとしましたが１６ミリ球では細かすぎて挫折しました
上下逆使用でやっていましたが どうしても歩行に伴うロールは消せませんでした
これはミニベアが構成する同心円上で１６ミリ球が接触していることだと確信
つうことで 最近はＵＪを使用しています
貴兄の場合は下向きですから擬似的に軸一本上にあると思われますから
いいのでしょうけど
Ｃ５Ｈにとらわれ１年無駄にしたカンジ・・・でもほかの部分で勉強になりましたけどｗｗｗ
腕は一向に上がりませぬ 風景を四角に切り取り日を見出す能力はないみたいで（自爆
very nice thanks!
@BMacW650
Yes, You Can !
thank you very much
すごくほしい。
Please try to search on "ball transfer".Try at your own risk.
Good job
very good.
@P1NKL1ON まだ余震が続いてますね。
内径φ12だと強度満点ですね。
動くモデルさんの撮影でDOFの効いた画を撮ろうとすると、距離感を保つは至難の業ですよ。EOSのばわい笑
後はバランスの具合やジンバルの摘みようや歩き方や風の悪戯やその他諸々の不思議な現象や、ほんまに厄介な趣味だこと。
wow, great answer, thanks xD
I contacted many ebay sellers to know if those Transfer Bearing were easy to open, they all answered me that this was just impossible. I'm still searching for the right Transfer Bearing.
Bravo.
Thanks for this video.... But would you mind to write in english. At least this could be useful even for the rest of the planet. TY
High-precision TIG welding by RUclipsr's TeethOfTheEarth.
@Tim1173JB えっＣ－５Ｈは南海バラしたでしょうかｗｗ
台所の茶碗を洗うＢＧＭはありますが声がないのが寂しいす
「あんたなにゅーしょんなら」・・・茶碗の音が聞こえると思い出します（爆
@Tim1173JB ＴＯＰしたのベアリングはこないだ入れました
これでパン方向は解決ですね ６００１を使い内径Φ１２に三好ズッポリでピッタシ＾＾
上ベアリングだと芯ブレはＮＧでしょうね
風景は余震でもない限り動きませんから自分の動きをモロ反映しますものね
その点動くモデルのある撮影は楽ですね
なかなか決まりませぬ
いい趣味ではあるのですけどね（笑
@BMacW650 google "VXB kit7768" almost exact same spec.
Drunk grooves and glue
ТОЖЕ ТАКОЙ ХОЧУ))
ТЫ МНЕ ПОМОГ))
Level asian
ebay
Chino te odiooooooooooo...