I thought I was going to be out of pocket fixing this problem after changing my battery. Used your fix, exactly as you said and boom all solved. Well done my man, you have saved me a few pounds
I was having this problem, thought it was the purge valve issue so I replaced that, and it still wouldn't idle without dying. I found this video and tried it. Let the car run as prescribed here, and then drove it around a while. Boom, all better. Thanks!
THANK YOU so much from Australia! 🇦🇺 i have a 2008 Mazda 6. I was getting so worried because nothing was fixing the problem, very rough idle and stalling when coming to a stop right after I had changed the battery, and didn’t have the money to take it in to a mechanic. Did a full service, changed spark plugs, MAF Sensor cleaned and nothing. As a last resort I searched on RUclips for a fix and this video came up, needless to say it worked! Thank you! How did you find this fix out?
I believe this is the exact steps (from another video) on how to relearn the idle: 1. Disconnect negative terminal on battery for 10 minutes. 2. Reconnect battery terminal. 3. Turn ignition on for 1 minute but don't start the car. 4. Turn ignition back off for 1 minute. 5. Start the car and allow the engine to idle for 5 minutes without airconditioning or any fans on. Don't accelerate. 6. Turn engine off. 7. Start the car and turn on airconditioning and allow the engine to idle for 5 minutes without acceleration. 8. Turn engine off. Engine Idle should now be reset.
This worked for my car and probably saved me hundreds. I appreciate it, if you know much more about Mazda 6’s post some more vids. Il check them out! Ps. Just weird I saw your vid first compared to people who have made the same vid but idgas
This guy speaks the truth. Have a 2008 mazda 6. Changed battery twice and as soon as I cranked it. Would idle real low and shake. First time I had no clue what was wrong and it just fixed itself. 2nd time let in run in the drive way for 30 min. Problem fixed.
if it continues to run rough check your purge valve solenoid usually is stuck open allowing vacuum into the intake ..worked for me mazda 3 2006 2.3 engine running smooth
Joe Johnson im wondering about this, i have a cel and it says im running lean, sometimes i smell gas. Rough idle, hesitation, bad gas mileage, i have some sort of vacuum leak i guess
My mazda 3 2004 four cylinders refused to for over 3 weeks now. The mechanic said it's brainbox issue. I have changed the brainbox all to no avail. Please can you help me out on how to get car started again? I love the car.
Dayum! It worked just as described. I had replaced the battery in my car as well. After that, the car had a rough low idle and stalled out a couple times. An awesome fix. Thanks,
In the mornings, I have to start my car like 7-10 times cuz it dies, until it doesn't, then the tachometer goes up and down until it stabilizes its self. IDK whats going on 04 mazda 6 2.3L ;/
Son 20 minutos encendido Y otros 20 minutos Con el carro apagado Y el aire encendido Al máximo Y de ahí se desconecta la batería Y de ahí se enciende 20 minutos El carro En total es una hora Que se hace ?
I’ma try this over the weekend. Do I do this with a new battery or the one I have (still good)? Before I do this procedure, do I have to disconnect my battery first and connect? Thx
Your hack worked great on my 2010 3i 2.0L with about 148,000 miles. I definitely noticed an improvement at idle. Thank you!
I thought I was going to be out of pocket fixing this problem after changing my battery. Used your fix, exactly as you said and boom all solved. Well done my man, you have saved me a few pounds
Thanks bro it worked for my car. I really appreciate you and others who make videos like this because they really truly are a blessing.
Hey Bro , did your mazda was going idle in reverse !! Or when you are approching a stop !! ?? Cuz I'm having this issue acturally !!
I heard the same testimony in another video. Glad to hear it worked. Thank you.
I was having this problem, thought it was the purge valve issue so I replaced that, and it still wouldn't idle without dying. I found this video and tried it. Let the car run as prescribed here, and then drove it around a while. Boom, all better. Thanks!
I followed this step and while it was running in the driveway it got stolen.
You live in Chicago?
They did you a favor now they have the problem.
You must be from 63rd!!!!!!
Thank you so much it worked 2006 mazda 6
Life saver. Thankyou from Scotland. Worked a treat 😁
My shit running smooth asf now. That’s crazy. Thought he was bullshittin
THANK YOU so much from Australia! 🇦🇺 i have a 2008 Mazda 6. I was getting so worried because nothing was fixing the problem, very rough idle and stalling when coming to a stop right after I had changed the battery, and didn’t have the money to take it in to a mechanic. Did a full service, changed spark plugs, MAF Sensor cleaned and nothing. As a last resort I searched on RUclips for a fix and this video came up, needless to say it worked! Thank you! How did you find this fix out?
I believe this is the exact steps (from another video) on how to relearn the idle: 1. Disconnect negative terminal on battery for
10 minutes.
2. Reconnect battery terminal.
3. Turn ignition on for 1 minute but don't start the car.
4. Turn ignition back off for 1 minute.
5. Start the car and allow the engine to idle for
5 minutes without airconditioning or any fans on. Don't accelerate.
6. Turn engine off.
7. Start the car and turn on airconditioning and allow the engine to idle for 5 minutes without acceleration.
8. Turn engine off.
Engine Idle should now be reset.
Thanks bruh been an ongoing issue for me, even with transmission flush and thermometer replaced, even new battery. God bless
Unbelievable... it actually worked! Wow! Thank you so much. It's legit, people.
This worked for my car and probably saved me hundreds. I appreciate it, if you know much more about Mazda 6’s post some more vids. Il check them out!
Ps. Just weird I saw your vid first compared to people who have made the same vid but idgas
Worked like a charm. Thanks
This guy speaks the truth. Have a 2008 mazda 6. Changed battery twice and as soon as I cranked it. Would idle real low and shake. First time I had no clue what was wrong and it just fixed itself. 2nd time let in run in the drive way for 30 min. Problem fixed.
if it continues to run rough check your purge valve solenoid usually is stuck open allowing vacuum into the intake ..worked for me mazda 3 2006 2.3 engine running smooth
Joe Johnson where is that located at
Also interested maybe a video
Joe Johnson im wondering about this, i have a cel and it says im running lean, sometimes i smell gas. Rough idle, hesitation, bad gas mileage, i have some sort of vacuum leak i guess
My mazda 3 2004 four cylinders refused to for over 3 weeks now. The mechanic said it's brainbox issue. I have changed the brainbox all to no avail. Please can you help me out on how to get car started again? I love the car.
Dayum!
It worked just as described.
I had replaced the battery in my car as well. After that, the car had a rough low idle and stalled out a couple times.
An awesome fix.
Thanks,
I'm going to try this ... maybe you just saved me my friend! Anyway thank you !
My ac compressor it's no working. It's been disconnected.if let it run only 20mins or more?
In this case will the car also have no power ? In my case the car struggles to get up to 15mph and will no go any more then that
You nailed it my friend.....
Thanks Bud. You saved my @$$ !!!
I cant turn off the radio on 2017 Mazda 6 ....should i disconnect the battery and reconnect
Yes me to mazda 2016 ? Hove to turn off the radio ?
I need to try this because this problem started after my battery was unplugged for a one night
Is this for the electric throttle body only ?
Lmaooo yooo this shit actually works
If the car was to stall before the idle time was up (issue is car stalling at stop light/stop signs) do you just restart from the beginning?
Awesome !!! Thank you
Does the AC need to be on full blast or can I keep it low?
Doing this process now but I have been having high idle then it will calm down but when I press the brakes it rises in idle a little bit
same thing happens to me. Did you fix it my friend? if so, may you tell me how?
Dude you're a fucking legend!!!
In the mornings, I have to start my car like 7-10 times cuz it dies, until it doesn't, then the tachometer goes up and down until it stabilizes its self. IDK whats going on 04 mazda 6 2.3L ;/
Son 20 minutos encendido
Y otros 20 minutos
Con el carro apagado
Y el aire encendido
Al máximo
Y de ahí se desconecta la batería
Y de ahí se enciende
20 minutos
El carro
En total es una hora
Que se hace ?
This shit works .. thanks playa
Good shit Justin
I’ma try this over the weekend. Do I do this with a new battery or the one I have (still good)? Before I do this procedure, do I have to disconnect my battery first and connect? Thx
I know I also wanted an answer to this question. I just did this 2 minues ago, the answer is no you do not need to disconnect the battery first.
Worked for me!!
I will try this thanks
Or you could just disconnect the battery and hold the 2 terminals together for a minute
Didn't work, what's next?
Homie, some of us have to go to work... lol, who has time to sit for 40 mins and let their car idle
rob shekelberg that’s why you do it on an off day
If u cant spare 40 min then go spend 200 bux at the shop
go pay a mechanic
Buy a bike, or learn time management skills
@@rationalguru nope, stop complaining and grow some balls
what if i cant turn the radio off lol
This makes absolutely no sense. Turn off the radio? Turn on the air-conditioning? What on earth
😂😂
I have a 5. oh well. haha. its called "Idle Relearn Procedure"
tried this, didnt work
Yo same shit happened to me
Hope you're not a mechanic :))))))))))))))))))))))))) !!!!!!!!!!!
where do you get fuel to idle car for 20 + 20 minutes your solution is BOGUS
Idiots
this person is stupid
Thank you much. Fixed my issues.