Very cool interesting setup between the diffs and the brakes! You just know it has to be a major improvement once you get it dialed in! Plus the disks and calipers just look awesome 😂😂. Thanks for sharing your awesome rigs with us!
I’m lookin to get back into the hobby and 1/5 scale is the way I wanna go. I’d love to see a build sheet on this so I know what to get it’s been years but I was last in 1/10 and 8th scale
It’s a proper smart setup, nicely done MCDs are the best quality 5th scales in the market these days, I like these carbon fiber parts from bonehead rc on your car, brilliant job LANCE 👍👌
Nice setup, I have hydrax too. Been looking for a video on how to bleed the brakes and refill mineral oil, can’t find anything. Do you have any pointers?
Thanks. I haven't had to do that yet. Mine came pre-bled from Cardinal Racing and they have been working perfect. Have you checked the Cardinal Racing support pages?
Thanks for the reply, I’m in Australia and looked at the MCD racing pages here and o.s. And couldn’t find anything. I mucked around a bit with it last night and worked it out. You crack the nipples at reservoir and caliper then use one syringe with tube attached to fill and the other to draw out at the same time. Will check out the cardinal site too for future reference. Appreciate the response. Love your rig looks awesome. 🏎️🏎️🏎️🙏 Mine came pre bled too, but had to remove one line temporarily to fix an arm. Ended up with a bubble in the line and they became spongey.
Are the brakes made for the Duox and you’re putting them in the XR5? Seems odd for MCD to design something that doesn’t fit without grinding down the arm
No the brakes are made for the xr5/xs5. The alloy arms were not made for the hydrax brakes because that accessory came later on. The new alloy arms(V2 per say)do not need to be modified. Just like the original radio tray didn't accept the hydrax either. A new tray was made to accommodate the hydrax brake cylinders and servos.
I want to get into 1/5 scale but I'd imgonna have the time keep it simple start with 1/8 and if there's enough time themget an mcd rr5 ultimate ,out of all your cars that's myfav,outta curiosity what's the biggest engine you would advise putting in an mcd if you wanna send it?50gt?65?
@@valentinmanus1355 I haven't seen it either. I've only seen for the rr5. You should get in contact with Maher to see if he has one to send you for the on road cars
Great video. I’m in the process of adding Hydrax to my XS5 Max. I’m using the Sanwa M17 as well.
Cool David. The channel mixing wasn't that bad on the m17. Those brakes work really good. Have fun bro.
Crucial my man them brakes looking Sweeeet 💯🔥🔥🔥💯👍💯🙏
Just hope they perform tomorrow. Lol
Nice and them MCDs are crazy sick fire 🔥 🔥
Yessir. Love my mcd💪🏽
You got a seriously SuWeet build! Love it
Thank you kindly!
Bro that’s a bad ass build straight 🔥🔥🔥 love it keep up the good work
Thanks Juan💪🏽💪🏽
Very cool interesting setup between the diffs and the brakes! You just know it has to be a major improvement once you get it dialed in! Plus the disks and calipers just look awesome 😂😂. Thanks for sharing your awesome rigs with us!
Thanks Todd. Judgement day tomorrow.
@@CrucialRC good luck Lance!
🙏🏽
Really tight build those mcds. Looks sweet tho, nicely done crucial 👍
Thanks you sir!
Looks good brother. Nice video. The weather has been horrible definitely looking forward testing before the race. Keep the content coming.
Looks like testing will be at the track this time bro. Life keeps getting in the way. Lol
That is an amazing machine. So nicely put together 👍
We agree!
Brakes look really good! You have made many changes and adjustments to make the car even better 👍
It performed well. I'm happy with it.
Awesome bud she looks killer 👍👊🏻 good luck racing bud
Awesome setup! Right?
Thanks bro. I need it. Erick is a helluva racer. I need all the luck I can get. Lol
I’m lookin to get back into the hobby and 1/5 scale is the way I wanna go. I’d love to see a build sheet on this so I know what to get it’s been years but I was last in 1/10 and 8th scale
Great that your getting back into 5th scale. Check the mcd xs5 Playlist for everything concerning this car.
It’s a proper smart setup, nicely done MCDs are the best quality 5th scales in the market these days, I like these carbon fiber parts from bonehead rc on your car, brilliant job LANCE 👍👌
Thanks bro. Hopefully it all pays off tomorrow
Wow . Great concept. Nice job . Hope you get some practice. GodSpeed at the Wagoner park track .
Thanks Rob. With all the help you've given me I'm sure it will be a good race tomorrow
Awesome job as always 💪🏿💪🏿💪🏿🙏🏿
Thanks Coach!
There awesome brakes mate there worth the money great video 🦾🦾🦾
Thanks bro.
Awesome bro just bloody awesome
Thanks brosci. Where you been?
That’s a nice setup 👍🏼💯👊🏼👍🏼
Thanks Big John🤜🏽
@@CrucialRC Hell yea brother 👊🏼👍🏼👊🏼👍🏼
MCD is a beast🔥💯
I love it too Coach
Nice setup, I have hydrax too. Been looking for a video on how to bleed the brakes and refill mineral oil, can’t find anything. Do you have any pointers?
Thanks. I haven't had to do that yet. Mine came pre-bled from Cardinal Racing and they have been working perfect. Have you checked the Cardinal Racing support pages?
Thanks for the reply, I’m in Australia and looked at the MCD racing pages here and o.s. And couldn’t find anything. I mucked around a bit with it last night and worked it out. You crack the nipples at reservoir and caliper then use one syringe with tube attached to fill and the other to draw out at the same time.
Will check out the cardinal site too for future reference.
Appreciate the response. Love your rig looks awesome. 🏎️🏎️🏎️🙏
Mine came pre bled too, but had to remove one line temporarily to fix an arm. Ended up with a bubble in the line and they became spongey.
@@benjaminmaule2422 gotcha. Glad you figured it out. Thanks for watching and commenting.
Are the brakes made for the Duox and you’re putting them in the XR5?
Seems odd for MCD to design something that doesn’t fit without grinding down the arm
No the brakes are made for the xr5/xs5. The alloy arms were not made for the hydrax brakes because that accessory came later on. The new alloy arms(V2 per say)do not need to be modified. Just like the original radio tray didn't accept the hydrax either. A new tray was made to accommodate the hydrax brake cylinders and servos.
Subbed yah brother Hella nice rig
Thanks and thanks for the sub homie
Yeaahh mannn. Sickkkk.👊
Thanks Ivan💪🏾
Super dope!! Plus 1 sub here!!
Appreciate it and thanks for the sub👍🏽
Looks good man 👍
Appreciate it Whitto💪🏽💪🏽
I want to get into 1/5 scale but I'd imgonna have the time keep it simple start with 1/8 and if there's enough time themget an mcd rr5 ultimate ,out of all your cars that's myfav,outta curiosity what's the biggest engine you would advise putting in an mcd if you wanna send it?50gt?65?
Glad you like the rr5. Wish i could get it on a course track. I think a 63 or 65 will be perfect size big bore in any mcd.
@@CrucialRC ty soooomuchfor the wisdom I've heard horrorstories of people jumping big bores
That's just crazy.
All Right First 👍🔥🤪😎
Yessir💯
💪🙏✊️💯
👍🏽
Hello! Where can I get a setup sheet for a XR5? Thanks mate!
Hey bud. I have not seen one for a xr5
@@CrucialRC what about for the XS5?
@@valentinmanus1355 I haven't seen it either. I've only seen for the rr5. You should get in contact with Maher to see if he has one to send you for the on road cars
Do you have any LS Diff's or stock MCD Diff's used for sale?
Sorry Christopher, I do not.
@@CrucialRC Thanks, I'm changing my entire drive train to MCD. mostly all other components on the Rovan is stock.
@@MrCjmcqueen that's gonna be expensive. You could've bought a mcd if you have to do it all brand new parts
What work stand you got there?
It's a heavy duty keyboard stand from Amazon bro.
@@CrucialRC ok cool,thank you
Where u race?
Onroad course in Wagner Park, Williamstown NJ
Ty. Love the videos. I want to get an on road car. Not sure what one.
@@james-dt4ei appreciate it 🙏🏽 Get one and come thru
How many onions you have to move to buy that???lol
A lot😂
@@CrucialRC lmmfao
Always try to end ur video with a motion frames or ur or a car of same type....
I'll try