@9:40 I found it much easier to actually have the trigger in place then put the springs in. @14:25 what I found made things easier was to insert the pins into the slide catch just enough that it didn't pop out and get in the way when you pop the slide assembly in.
Hi Carl, i was forced to open up the fire rat as my "pusher" o ring was broken after firing. My first time opening up a blaster and your video was a life saver. I used all the tips that u mentioned and that gave me a better experience with my fire rat. Thanks a million!!
Thanks for the helpful video. Had to disassemble almost to shipping level (semi assembled) as something jammed while trying to remove the front muzzle to use the lower rail.
You are welcome sir, we hope to bring more awesome blaster internationally! Metal parts will be literally every single parts of S200, except for the main receiver. Yes you heard me right, LITERALLY EVERY SINGLE PART.
Thank you for the in depth guide. Unfortunately i lost my slide catch spring when taking my blaster apart. Do you have the specs for a replacement or a location I can get one? Thank you.
What size o-ring is used for the pusher? Mine has been rubbing slightly so often against magazine and as such I should replace it in case it ends up snapping.
I can't wait for this. Thank you guys for all the hard work. I know you say mid January, but is there better idea now that we are basically at mid January? Next week hopefully? LOL
Yes, it's possible to reach 180FPS with the S200 but it will be super hard to prime and will likely required a T-pull attachment that will be available later to prime it.
Hello, I'm a newbie who just started out with the S200. Can I know what tools I would need for this to get started on assembling and disassembling the product?
A set of good screw driver (phillip heads and hex allen keys), a small rubber mallet, some pin punch (if you don't have pin punch you can make do with allen key as well) for taking out/installing the pins. Prepare some silicone based grease lubs for the O-ring and moving parts too and you should be good to go.
I thought the moving barrel was initially a problem until I had to remove it in order to clear a dart jam. I'd rather not glue mine in, but I'd thought I'd share my little story. :)
Pretty fun. Although I've ended up with two extra springs. A small bag contained the slide catch parts, and there appeared to be two additional long springs; similar to the trigger springs, but slightly longer. Had no issue with the other springs that were included, but were these just spares?
The one I received specifications are: 7mm I.D. 2mm Thickness However I had a better fit with 1/4" I.D. 1/16" Thick O-rings. As the original O-ring kept bypass and getting stuck in the dart gate.
The S200 is estimated to be around 50USD excluding shipping. The ZWQ x Monkee Mods S200 package will include a partially disassembled S200, an upgraded spring (135FPS~) and a pair of upgraded catch spring.
We can ship worldwide but for SG you have check with your local authority for the import permits. If you make the purchase without the permit, we will not be held responsible should your country's custom confiscated the parcel.
I do wish they would use cyber punk neon bright colors for parts. I hope all the metal part upgrades are NOT black. I hope we get neon pink and green etc.. milsim black blasters are boring
@9:40 I found it much easier to actually have the trigger in place then put the springs in. @14:25 what I found made things easier was to insert the pins into the slide catch just enough that it didn't pop out and get in the way when you pop the slide assembly in.
Hi Carl, i was forced to open up the fire rat as my "pusher" o ring was broken after firing. My first time opening up a blaster and your video was a life saver. I used all the tips that u mentioned and that gave me a better experience with my fire rat. Thanks a million!!
Very good guide! Built mine in like 5-7 minutes after watching this! Thank you.
Thanks for the helpful video. Had to disassemble almost to shipping level (semi assembled) as something jammed while trying to remove the front muzzle to use the lower rail.
Great video, easy to follow and assemble my new lime green S200 :)
Love your work guys. Checking in for the Firefly comp :)
awesome ! thanks for making all those awesome blaster available worldwide :) what are the metal upgrade parts be ?
You are welcome sir, we hope to bring more awesome blaster internationally!
Metal parts will be literally every single parts of S200, except for the main receiver. Yes you heard me right, LITERALLY EVERY SINGLE PART.
@@monkeemods8393 could you clarify? the trigger, slide cover, slide catch, slide stop...etc. seem to be all plastic?
@@Ollv33 If you follows the original comments, the question is if there is any metal upgrade parts for the S200. And that reply is for that.
Thank you for the in depth guide. Unfortunately i lost my slide catch spring when taking my blaster apart. Do you have the specs for a replacement or a location I can get one? Thank you.
What size o-ring is used for the pusher? Mine has been rubbing slightly so often against magazine and as such I should replace it in case it ends up snapping.
Try 11.5/12mm (outer diameter) x 1.9mm (cross section diameter)
I can't wait for this. Thank you guys for all the hard work. I know you say mid January, but is there better idea now that we are basically at mid January? Next week hopefully? LOL
It will be up next week, stay tuned ;)
If I wanted to use upgraded springs, can I get higher FPS? Like 180 FPS?
Yes, it's possible to reach 180FPS with the S200 but it will be super hard to prime and will likely required a T-pull attachment that will be available later to prime it.
Will this be also available in Philippines, if so will there be taxes and duties involved?
We do ship them worldwide, we are however unsure about your country's custom taxes and duties.
Hi Carl - my pusher seems very hard to be removed from the breecher - any idea how to remove this so that won't hinder other process?
Will this blaster be available in Australia? And if so when?
It'll be available as a "DIY" kit that you will have to assemble yourself, hence this video lol.
Expect it to be available around mid January!
@@monkeemods8393 what's the price?
@@monkeemods8393 the diy kit is awesome idea!!
What is the price it is going to go for and what colors are going to be available?
Around 50USD. 4 default colors will be available. Transparent, White, Sand and Pink.
heard that there is no padding for the plunger and heard that someone damaged their plunger after dry firing a couple times. any tips for this?
We have no solution for that at the moment, but if you are on the stock spring then you should be okay, just avoid dry firing as much as possible.
Is there a list of tools and sizes required?
ANd do you have any tips on where to get a replacement holdopen spring?
Uh, pin punch for the pins, Allen key set, a rubber mallet and some common hand tools I suppose.
What's hold open spring?
I'm your 600th subscriber:)
I literally saw it happened! Thank you very much sir for your kind support!
@@monkeemods8393 you're welcome, and I literally unsubscribed from another person because I've reached the limit.
How much will this be in RM? Also can i not have the upgrade spring and catch so that i can buy it cheaper?
About RM200~ and no the spring upgrades are part of the package, they cannot be removed.
Hi. Does the orange transparent unit still ship with black mags?
They are now shipped with the updated Orange color magazine.
Hello, I'm a newbie who just started out with the S200. Can I know what tools I would need for this to get started on assembling and disassembling the product?
A set of good screw driver (phillip heads and hex allen keys), a small rubber mallet, some pin punch (if you don't have pin punch you can make do with allen key as well) for taking out/installing the pins.
Prepare some silicone based grease lubs for the O-ring and moving parts too and you should be good to go.
Just received this blaster and absolutely love it. I have noticed that the barrel slowly moves out it’s a little frustrating. What would you suggest?
I just received my S200 from MM today and the same thing happened to mine. It moved out about 3 cms.
Did you find a fix for it?
Thanks
@@werdnawee yeah I glued it in
Haha. Cheers. That'd fix it. 😀
I thought the moving barrel was initially a problem until I had to remove it in order to clear a dart jam. I'd rather not glue mine in, but I'd thought I'd share my little story. :)
Pretty fun. Although I've ended up with two extra springs. A small bag contained the slide catch parts, and there appeared to be two additional long springs; similar to the trigger springs, but slightly longer. Had no issue with the other springs that were included, but were these just spares?
That's most likely the upgraded catch spring.
my question as well, I used the longer springs at first but they seem way to compressed so I am switching.
Mine didn’t come with any extra springs… maybe you got mine lol
Would this pistol be compatible with worker talon angled mags. If not, would the mag pistols be sold separately and how much?
Proprietary mag sir. The spare mag will be sold separately at around 5USD~ each
Is there no padding between the plunger and the turnaround?
no
My barrel sometimes comes out when I fire.
Sometimes the darts feed at wrong angles and also push the barrel out when i chamber a round.
Help.
Use super glue to fix the barrel to the U-channel where the barrel is inserted.
is it a good idea to lube the slide to get a smoother prime?
Lube when applied moderately and correctly will always help.
i would pre order this if i could
They'll be available very soon around mid-January!
hi can ship to Singapore?
We cannot guarantee that it will pass your country's custom safely though, unless you have an import permit.
what size is the o ring on thr dart pusher?minr did not comr with one so its firing performance is " stock hasbro" weak
The one I received specifications are: 7mm I.D. 2mm Thickness
However I had a better fit with 1/4" I.D. 1/16" Thick O-rings. As the original O-ring kept bypass and getting stuck in the dart gate.
@@SomeDude881 thanks! I'll try one this afternoon!
What will be the price?
The S200 is estimated to be around 50USD excluding shipping. The ZWQ x Monkee Mods S200 package will include a partially disassembled S200, an upgraded spring (135FPS~) and a pair of upgraded catch spring.
@@monkeemods8393 I hope I can buy it soon
@@monkeemods8393 My kit came without the upgraded catch springs, can you ship them?
I assambled mine but I can`t cock the gun all the way - it`s blocked by something
Available in SG?
We can ship worldwide but for SG you have check with your local authority for the import permits. If you make the purchase without the permit, we will not be held responsible should your country's custom confiscated the parcel.
did u order?
Can get in SG?
We can ship to SG but I heard you need to get an import permit.
@@monkeemods8393 ok tks
@@monkeemods8393 if disassembled can?
hi did u order?
@@Juan-nz1gu nope.... don't think Singapore can clear.
I do wish they would use cyber punk neon bright colors for parts. I hope all the metal part upgrades are NOT black. I hope we get neon pink and green etc.. milsim black blasters are boring
That is a possibility!