Epic mountains and lighting. Sucks to see the JELLion 10 is still ruining shots. I just sent mine into the iflight shop for months to fix the vibrations, finally got it back aaaaaaand...... Still jello. Ill try those props tho, good vid.
Yea at the end I saw the stock props are the best. I am using thoes and even balanced them with a balancer and they still get low throttle jelly. I'm hoping the new thicker bottom plate they are sending me will fix it for good.
Now I can confirm that there is a thicker version of the bottom plate that is been tested! Just spoke to Ellis and he confirmed it! They have tested the bottom plates on the worst version of the Helion with the worst jello possible and now with the new plate all is fixed.
Hello incredible as usual, I have a question I finally just bought a helion, I see that you have a plate with feet under the battery. Where is it possible to find one? Thanks
Is that on their website somewhere? When I asked support it hadn’t been tested or approved yet. “Regarding the thicker bottom plate kit you mentioned, it is still in the testing stage and has not been released yet. Once the test confirms that there are no problems, we will consider further measures. Please pay close attention to the updates on our official website”
Gemfan have a new 1050W. Wider ones. Also more heavy. Gemfan claim that they dont explode anymore. Not sure if people habe been experiencing that issue alot. I only heard of it once. Also HQ has 10x4.5x3. Foxeer has some nice 1050 too. There is a lot more testing that can be done. I tested the foxeer 1050 and Tmotor C10.5 props on my 10 inch and both work well without issues. My motors are 3115 though. Surely they spin the heavier, wider props much better.
Yeah maybe I have the new one from gemfan and I actually did test it the same day but my GoPro turned off so to make it fair I compared the ones that was recorded.
Props isnt the issue its the helion frame..they made a thicker plate apparently thst fixes it but i have zero vibrations on my custom 10inch build wirh hq props.
Agreed to disagree! I showed you what happened after changing my props! And you telling me otherwise? Thanks but no thanks 🫶🏾. I’m not saying there isn’t an issue! I don’t fly all Helion out there and I do know some that are fly worst than others! But on my case it was clear that the props didn’t work!
@@babang_des your throwing on complete different profile prop with same tune expecting it to have no issues ? Sorry it doesn't work like that. If you change a prop that has completely different weight and chord thickness expecting it to fly the same as your much thinner light prop on the same tune your sadly mistaken Btw I'm not having a go at you man 👌 love your content but the hq props are completely different you can't expect them to be the same without a new tune on the quad, you will run into issues like you have and josh tune on the helion is already on the limit it's a very aggressive tune so oscillation will be expected
I agreed with the props thing but as I said I was out of the HQ one and couldn’t get it to work! Some props are just easier to deal with! BTW I’m not throwing HQ under the bus! I’m flying them in all my 5” and 7”. They just don’t cut it for me on this one!
@Babang Deshommes So which was you favourite then? I also tried the HQ props prior to seeing this video and I had the same jell-o effect when pulling out. I returned them!
Yeah the Gemfan is my favorite and exactly the same happened. When you are in that perfect position with the throttle and angle 📐 everything is good. If you pulling off from a dive it just turn your clips to garbage 🗑️
Yea thats so true. Presuming when you say Gemfan is your favorite you are referring to the 1050 and not the Gemfan 1050W? By the way top call video some amazing shots you got there😊
What is the current version number of BF? I found that after updating 4.5, I got more jelly. Between low throttle and 30 throttle, I checked the black box data and found that the motor RPM was not synchronized when starting at low throttle, causing the motor to shake due to inconsistent RPM. The BF historical version was updated, and the motor command was modified after 4.4.3. I don't know if this has affected it,
dude incredible flying and footage! so glad I just found your channel
Glad you enjoy it! And welcome to the club 🫶🏾
Respekt buddy !!!!!
Thanks mate 🙏🏾
Congrats. Very nice video. Liked. Have a nice weekend.
Thank you! You too!
Soooo…. Beautiful 🤩🤩🤩
Thank you! Cheers!
I like the master airscrews, gonna try there bi blades on my custom 10" build
Let me know how it goes with the Bi blades
Bro, beautiful views. 👌🏽
Thank you 🙌
Amazing video bro!🫶🫶
Thanks 🔥brother!
Woow mountain all time awsome ! Is what i miss in my videotech :) good shot 👍
Yeah and I miss I good bando 😂🫶🏾
@@babang_des same ! I'm Tired of making landscape 😄
Seeing these guys ripping bando makes me jealous 😂
Agreed 😄
🫶🏾
That was awesome, but how did you increase O3 unit range?
I’m still using the original antennas just did the ham files!
Epic mountains and lighting. Sucks to see the JELLion 10 is still ruining shots. I just sent mine into the iflight shop for months to fix the vibrations, finally got it back aaaaaaand...... Still jello. Ill try those props tho, good vid.
Yeah did you see the entire video? I only changed props and everything was fixed
Yea at the end I saw the stock props are the best. I am using thoes and even balanced them with a balancer and they still get low throttle jelly. I'm hoping the new thicker bottom plate they are sending me will fix it for good.
@@CRAGLORDwho is sending you the plate? I want to test it too.
You have to reach out to iflight to get a new bottom plate. Idk if anyone has actually got one yet
Now I can confirm that there is a thicker version of the bottom plate that is been tested! Just spoke to Ellis and he confirmed it! They have tested the bottom plates on the worst version of the Helion with the worst jello possible and now with the new plate all is fixed.
Hello incredible as usual, I have a question I finally just bought a helion, I see that you have a plate with feet under the battery. Where is it possible to find one? Thanks
Yes I do! And I have a link in the description where you can get it!
i just got sold on props, and i dont even have a 10" drone(yet).
Hahahah that’s funny 😄
There is a jello fix now. A new main plate. Contact iflight for the replacement part.
Is that on their website somewhere? When I asked support it hadn’t been tested or approved yet. “Regarding the thicker bottom plate kit you mentioned, it is still in the testing stage and has not been released yet.
Once the test confirms that there are no problems, we will consider further measures. Please pay close attention to the updates on our official website”
@SwellDrone I sent my helion to iflight repair center and that's what they are doing for the jello repair. It's the usa center
@@squirrelynutz1 ya Patrick in Washington state. I know all about it… I just want the hardware. I’ll do it myself.
This I actually didn’t know about it!
hey Friend amazing vids! may I ask you for the location of wich you recording?
It’s outside of Tromsø in Norway
Gemfan have a new 1050W. Wider ones. Also more heavy.
Gemfan claim that they dont explode anymore. Not sure if people habe been experiencing that issue alot. I only heard of it once.
Also HQ has 10x4.5x3.
Foxeer has some nice 1050 too.
There is a lot more testing that can be done.
I tested the foxeer 1050 and Tmotor C10.5 props on my 10 inch and both work well without issues.
My motors are 3115 though. Surely they spin the heavier, wider props much better.
Yeah maybe I have the new one from gemfan and I actually did test it the same day but my GoPro turned off so to make it fair I compared the ones that was recorded.
But I can tell you on the Helion they both HQ and the new Gemfan didn’t perform good! I need to make one comparing more props.
Props isnt the issue its the helion frame..they made a thicker plate apparently thst fixes it but i have zero vibrations on my custom 10inch build wirh hq props.
Agreed to disagree! I showed you what happened after changing my props! And you telling me otherwise? Thanks but no thanks 🫶🏾. I’m not saying there isn’t an issue! I don’t fly all Helion out there and I do know some that are fly worst than others! But on my case it was clear that the props didn’t work!
@@babang_des your throwing on complete different profile prop with same tune expecting it to have no issues ? Sorry it doesn't work like that. If you change a prop that has completely different weight and chord thickness expecting it to fly the same as your much thinner light prop on the same tune your sadly mistaken
Btw I'm not having a go at you man 👌 love your content but the hq props are completely different you can't expect them to be the same without a new tune on the quad, you will run into issues like you have and josh tune on the helion is already on the limit it's a very aggressive tune so oscillation will be expected
I agreed with the props thing but as I said I was out of the HQ one and couldn’t get it to work! Some props are just easier to deal with! BTW I’m not throwing HQ under the bus! I’m flying them in all my 5” and 7”. They just don’t cut it for me on this one!
@Babang Deshommes So which was you favourite then? I also tried the HQ props prior to seeing this video and I had the same jell-o effect when pulling out. I returned them!
Yeah the Gemfan is my favorite and exactly the same happened. When you are in that perfect position with the throttle and angle 📐 everything is good. If you pulling off from a dive it just turn your clips to garbage 🗑️
Yea thats so true. Presuming when you say Gemfan is your favorite you are referring to the 1050 and not the Gemfan 1050W? By the way top call video some amazing shots you got there😊
Yes the 1050 the new one is not performing good for me at least
What is the current version number of BF? I found that after updating 4.5, I got more jelly. Between low throttle and 30 throttle, I checked the black box data and found that the motor RPM was not synchronized when starting at low throttle, causing the motor to shake due to inconsistent RPM. The BF historical version was updated, and the motor command was modified after 4.4.3. I don't know if this has affected it,
Im using 4.5 actually!
@@babang_des After you changed the propeller, it is obvious that the change is too significant, in the range of low throttle to 30%
It was day and night!!! I’m sure it has to do with the temperature maybe I was flying at to! I’m still on the Bataflight 4.5 RC1