well i bought soybeans to test fill up my trailer, cost me $4,489,890and it took a while for 5millionL , then since i forgot to adjust the unload speed it took a while to off load and sold it back for $11,193,977
Thank you DJ for teaching me something new about why some of my machines are handling differently because of capacity changes. By adding updateMass=“false”, I can make my affected machines and trailers better! Thank you!
Ok so i tryed this on the same trailer and it holds the capacity that i gave and that is 10milion but the updatemass thing doesnt want to work it says after i saved it mass false but in game it is still heavy it gets like to heavy at like 250k my 710hp truck goes only 3-5mph when trailer is hooked up can so can somebody help me with this problem
Gday DJ. One thing I have found is that if you put the capacity over 1 mill, Courseplay doesn't recognise the trailer so you can't use it for chasing harvesters etc.
hey, so i followed the vids with a different mods, it shows under the installed but when i start my game and look to turn it on it wont show up? what am i doing wrong :D ? thanks for any help
So i was editing the Liebherr 902 pack to make 2 of the buckets have a bigger capacity, it shows up in the mods section in installed mods (4:10), but when i get to the page where you select the mods in my save game (4:32), the edited version doesn't show up. Anyone know why? I followed all of the steps you did exactly.
This is awesome. This is exactly the type of videos I wish you would do more of. Helps so much. (One minor suggestion-please go a little slower😜). Keep up the great work!
Why can't a modder do this on his pc and then release it as a new mod trailer on consoles? We would love to have huge capacity trailers (like 1-2 Million Litres) on Consoles too!
So, i have edited everything as shown, i have it show up in the installed game modhub although there is no pictures on the left side when you view details. When I run my saved game, the mod does not showup on the list of boxes to check.
I am modding Krone ZX 430 GD, 300k capacity (updateMass used) and i think i also changed the pickup amount from 350 to 750, and the discharge from 3250 to 25,000
Help Please. I tried this even with a 1000HP tractor I can't haul it. Even at 160,000 Ltr full It only goes 4mph and don't even try a hill it doesn't go anywhere. What am I doing wrong. I did the update mass and still nothing.
hey DJ would you or anyone know how to add a fill type for example a tanker you can have milk and water....i want to add fuel or diesel to a certain trailer would that be hard to do??? thanks and i enjoyed this video i just edited a bunch of mods ive been wanting to change a few things to it thanks agian
Thanks so much for this tutorial. This is a game changer. Maybe you should make this a miniseries I’d love to know how to make a trailer accept different fruits, assuming it’s in the same files but not too terribly adventurous with this sort of thing.
Hey DJ I did everything the way you showed and the modded trailer shows up in my installed mods but it doesn't show up on the checklist before I start a game or doesn't show up in the game itself. Any help would be appreciated.
Ran into a little problem, don't save the game with a trailer that has 10M litres of straw, you have to unload it before you reload or it will be as immovable as concrete!
I tried doing this with the west ep dump pack following the steps in the vid. It's shows up in my downloaded list on mod hub but not in the mod check list before I jump into a map, any ideas?
hey nice video but just wondering if you type silage/straw/grass/hay or whatever in the filltype category right before the capacity to be able to fill the trailer with other stuff than "bulk"? or its not that simple?
I dont know what I'm doing wrong. I edited the 70000/6 trailer to have 1mil liters and I followed what he did here. It pops up in the in game mod hub but not on my save game mods select or in the store. Can someone help?
I had this as well... did you name it the same way he did? cuz once i did that it fixed it seems the game wont recognize the mod without the right save name
Help I want to make a capacity of my tralier bigger but the texture of what is inside also to be bigger. If i have a trailer with 45000l capacity and when its full the texutre of for example wheat doesnt go to 100% level and it still looks like 70 or 80%. It happens with every bucket and trailer in FARMING SIMULATOR GAMES. do you know how to make it more realistic?
Hey, so I changed the bucket size on a wheel loader from 36k to 150k, and added the updateMass= "false" bit, and now the bucket doesn't pick anything up at all. Any ideas?
I have a problem I'm hoping someone can help me with. I downloaded a modded Rapide 8400 Windrow trailer, when picking up hay I ended up picking up a few liters of grass that i missed with the tedder and it overrode the hay I had already collected. Lost about 200,000 l of hay for 5 l of grass.... What do I change in the file to stop that? I know the vid is old but I'm hoping someone sees this and can point me in the right direction. Thank you. Edit: Also can I edit say the silage sellpoint capacity at the BGA on the Lone Oak map?
Happens to me too but what I do is I pick it all up as grass then I dump it in a big long strip in an empty field or on the road and then I tedd it so that way I know for sure it's all hay
So yeah that updatemass seems to be fucked. Can't get anything to work, trying it with a wheelloader and it just keeps standing on its silage fork, can't even lift 10k silage without nearly flipping, and i even have a mod that already decreases the weight...
I did this with my rapidE8400 loading wagon.. now .. when i stop picking up hay or drive over grass.. it resets and starts from zero again.. any suggestions ?
i followed the instructions to a T and got it to work. the lemken 560 was the first thing i tried. i cant get the (updatemass="false") to work on anything but that lemken though so now i have a bunch of overfilled stuff that i cant move lol
Hello DJ, Great tutorial, I tried to increase the capacity of the Goma Front tank to 800000L and followed your instructions to the letter including the updatemass_"false" bit but when filling my JD still does a nose dive due to the weight, any sudjestions please?? Chris.
Very good video . So just for practice, I tried to do the TAM 80 but it brings up a log error that says " INVALID MOD NAME " I m really trying to do this thing . Most of the maps I play , I only use mods of which I have a lot lol . Would you may help me to get this right . Thank you very much for the best mod video I ve ever watched.
Nice video! I did this and it's working, tks! Hey, I have an idea for a great Mod, but it's a gameplay Mod, not a modeling one. How can I start from the begining? Do you know anyone who can teach?
I always update my trailers, but never knew the "updatemass" trick. You my friend are a prince among men.
I can't edit the .xml how or where do i go to do that
so i'm using notepad++ now, wordpad was confusing me
wo hoo got it done and tested, works great thx ,5 million tows like 5 hundo!
well i bought soybeans to test fill up my trailer, cost me $4,489,890and it took a while for 5millionL , then since i forgot to adjust the unload speed it took a while to off load and sold it back for $11,193,977
@@combatvettallil or you could use government subsidy mod if you needed money
got bored, wanted a modded trailer to carry alot of stuff, appreciate the vid
Thank you so much. Im playing a massive Australian map and moving 1.6mil liters of corn off a field was taking forever.
Thank you DJ for teaching me something new about why some of my machines are handling differently because of capacity changes. By adding updateMass=“false”, I can make my affected machines and trailers better! Thank you!
bro i love you, I was like 1 hour without knowing what to do until I found your video, thanks
I did everything right and it didn't show up in my mods when I load a save
i got the same, but i'm using winrar, can you make a vid with that too?
Ok so i tryed this on the same trailer and it holds the capacity that i gave and that is 10milion but the updatemass thing doesnt want to work it says after i saved it mass false but in game it is still heavy it gets like to heavy at like 250k my 710hp truck goes only 3-5mph when trailer is hooked up can so can somebody help me with this problem
Gday DJ. One thing I have found is that if you put the capacity over 1 mill, Courseplay doesn't recognise the trailer so you can't use it for chasing harvesters etc.
This is the best video I have ever found!!!!
hey, so i followed the vids with a different mods, it shows under the installed but when i start my game and look to turn it on it wont show up? what am i doing wrong :D ? thanks for any help
Just got PC Version!!!
Now I am going back and learning all new stuff again!!
Thanks DJ!! You da man!
Oh yes! Thank you, Thank you so much for sharing this. It will be used!
So i was editing the Liebherr 902 pack to make 2 of the buckets have a bigger capacity, it shows up in the mods section in installed mods (4:10), but when i get to the page where you select the mods in my save game (4:32), the edited version doesn't show up. Anyone know why? I followed all of the steps you did exactly.
dk why but same thing happens to me
Giving us consul players, pc envy agian... Thanks
eddiewinehosen NOBODY CARES
puremark403 I spent a lot on pc but now I can't envy anymore lol
This is awesome. This is exactly the type of videos I wish you would do more of. Helps so much. (One minor suggestion-please go a little slower😜). Keep up the great work!
Why can't a modder do this on his pc and then release it as a new mod trailer on consoles? We would love to have huge capacity trailers (like 1-2 Million Litres) on Consoles too!
just get a pc
@@srg1653 just buy giants software
So, i have edited everything as shown, i have it show up in the installed game modhub although there is no pictures on the left side when you view details.
When I run my saved game, the mod does not showup on the list of boxes to check.
I am modding Krone ZX 430 GD, 300k capacity (updateMass used) and i think i also changed the pickup amount from 350 to 750, and the discharge from 3250 to 25,000
Help Please. I tried this even with a 1000HP tractor I can't haul it. Even at 160,000 Ltr full It only goes 4mph and don't even try a hill it doesn't go anywhere. What am I doing wrong. I did the update mass and still nothing.
can you do a tutorial on editing unload speed i have tried this myself and cant seem how to unload it quicker.
hey! i did change capacity in a trailer but the tractor speed down to 5-6 km/h tractor cant drag this weight. how can i change weigt limit?
I love this tutorial! I always needed a giant trailer for field 6 on Dahl ranch!
Thank you so much for a true detailed video on changing the xml file.
nice, now i can do that to my trailer i got. i used your old trailer with 1 million and i doesnt work anymore. so this is helpful
hey DJ would you or anyone know how to add a fill type for example a tanker you can have milk and water....i want to add fuel or diesel to a certain trailer would that be hard to do??? thanks and i enjoyed this video i just edited a bunch of mods ive been wanting to change a few things to it thanks agian
Thanks so much for this tutorial. This is a game changer. Maybe you should make this a miniseries I’d love to know how to make a trailer accept different fruits, assuming it’s in the same files but not too terribly adventurous with this sort of thing.
Can someone help. I did everything right (I think) but it's not showing up in the in game store
I do everything right but it doesn’t show up in my mods/dlc when I start the game
same
Same for me to
Nice one DJ you should do more videos like this as I haven't a clue lol love to see how you do the combine get full to fast lol 👍👍
Followed this word for word and it will not show up in game. Will show up in mods installed but not the store
Hey DJ I did everything the way you showed and the modded trailer shows up in my installed mods but it doesn't show up on the checklist before I start a game or doesn't show up in the game itself. Any help would be appreciated.
Ran into a little problem, don't save the game with a trailer that has 10M litres of straw, you have to unload it before you reload or it will be as immovable as concrete!
I tried doing this with the west ep dump pack following the steps in the vid. It's shows up in my downloaded list on mod hub but not in the mod check list before I jump into a map, any ideas?
Great help, thanks lad!
Have you seen any issues where FS19 shows that the mod is install but the mod is not available to be selected when starting a session?
Hi, I wanna ask, I do exactly how you did. But, I can't pull the trailer at all.
i have got it in the modhub but it does not show up in game
😂 we don’t play fs how it’s meant to be played
How do we change the volume of the harvesters is it the same way?
Yes the same way
And what abaut your unloading speed
i did everything but the new mod that i made does not show up in the installed mods tab neither the screen which pops up after i select the save
If you are following this clip you may need to put the name as the same, also at the end of the updatMass="false". don't space
hey nice video but just wondering if you type silage/straw/grass/hay or whatever in the filltype category right before the capacity to be able to fill the trailer with other stuff than "bulk"? or its not that simple?
I dont know what I'm doing wrong. I edited the 70000/6 trailer to have 1mil liters and I followed what he did here. It pops up in the in game mod hub but not on my save game mods select or in the store. Can someone help?
I had this as well... did you name it the same way he did? cuz once i did that it fixed it seems the game wont recognize the mod without the right save name
Help I want to make a capacity of my tralier bigger but the texture of what is inside also to be bigger. If i have a trailer with 45000l capacity and when its full the texutre of for example wheat doesnt go to 100% level and it still looks like 70 or 80%. It happens with every bucket and trailer in FARMING SIMULATOR GAMES. do you know how to make it more realistic?
Although I mostly play to realism standards this is still a very helpful video!👍
It’s just not showing up in the shop to buy it but everything else is working
Thank you!!!
Hi Dj.. Thnx for the vid, tried it with plow price and it worked perfectly.. Now, how do I change the work speed.? Thnx
Thank you thank you thank you. I have ben wanting to learn how to do this
every thing worked fine but it didn't show up in the Game :(
Same problem on me
"False"
Nice video DJ!
Hey, so I changed the bucket size on a wheel loader from 36k to 150k, and added the updateMass= "false" bit, and now the bucket doesn't pick anything up at all. Any ideas?
Thanks, trying it now
Great information thanks.
Dose it work with combines
it worked thanks i tried it with a different mod
I do everything right but i don't get the XML file to edit it.
Thank you!!💙👍
What about default game items???
Hey dj I wanna put manure in a trailer that cant take it how would I change it
Unfortunately that is beyond my knowledge. I CAN however find out!
@@DjGoHamGaming thanks
I get in it says it’s in my download mods but when I get in the game I make sure it’s in the game but it’s not showing up too Buy it
I have a problem I'm hoping someone can help me with. I downloaded a modded Rapide 8400 Windrow trailer, when picking up hay I ended up picking up a few liters of grass that i missed with the tedder and it overrode the hay I had already collected. Lost about 200,000 l of hay for 5 l of grass.... What do I change in the file to stop that?
I know the vid is old but I'm hoping someone sees this and can point me in the right direction. Thank you.
Edit: Also can I edit say the silage sellpoint capacity at the BGA on the Lone Oak map?
Happens to me too but what I do is I pick it all up as grass then I dump it in a big long strip in an empty field or on the road and then I tedd it so that way I know for sure it's all hay
I like the video on the trailer mod but do you know where I can find a ghost seeder that works like the ghost plow, with adjustable with, Thanks
So yeah that updatemass seems to be fucked.
Can't get anything to work, trying it with a wheelloader and it just keeps standing on its silage fork, can't even lift 10k silage without nearly flipping, and i even have a mod that already decreases the weight...
i cant get the update mass false to work
Just what i needed Thnx!!! ;-) ;-)
I did this with my rapidE8400 loading wagon.. now .. when i stop picking up hay or drive over grass.. it resets and starts from zero again.. any suggestions ?
i got the same problem
Any way to do this on a loading wagon? Tried on the lemken 560 mod to no avail.
i followed the instructions to a T and got it to work. the lemken 560 was the first thing i tried. i cant get the (updatemass="false") to work on anything but that lemken though so now i have a bunch of overfilled stuff that i cant move lol
I was able to do this a few months ago now it completely breaks the mod when I do it :( all I do is change the capacity i don't understand
my modded mods dont work aswell
how do you make a new machine , i need a swather
Going to use it on a combine
Can you edit the .xml for combines to change the fill?
i tried this but my truck still cant pull it ..someone help
Your my inspiration for doing videos
hi dj, I've tried it in fs17 and it's also working on the same way.
Hello DJ, Great tutorial, I tried to increase the capacity of the Goma Front tank to 800000L and followed your instructions to the letter including the updatemass_"false" bit but when filling my JD still does a nose dive due to the weight, any sudjestions please??
Chris.
= not _
Also, uppercase M.
updateMass="false"
thx so much
I can't get mine in the game for fs 22
Hi can i do this with slurry tankers?
update mass types in black color not red and doesnt work? any tips?
Very good video . So just for practice, I tried to do the TAM 80 but it brings up a log error that says " INVALID MOD NAME " I m really trying to do this thing . Most of the maps I play , I only use mods of which I have a lot lol . Would you may help me to get this right . Thank you very much for the best mod video I ve ever watched.
Used it to slightly increase forage wagon capacity. (didn't do the 1mil kinda thing).
@djgoham can u show or tell me how to change the capacity of the in game lizard silos.
no comunication courseplay help please
For some reason the game doesn't show the mod as installed anymore aftwards and acts as if it doesn't exist
Thanks for this
I've got the same issue I do everything you say and do and the litre is still 63,000
Thank you Thank you
now since the update to 1.5 this method does not work at all
i have tried
I have also tried today, I'm trying to make this work for the mining map
I've tried this a few times and I can't get it to work. Using notepad++.
me neither
Yea same I tried four or five times
Dam it
Hey sir can i change capacity and price for all Trailers like this or every mod have diffrent trick /?
@eddiewinehosen after 9 weeks some one respond to me XDD. Thank you
how to add three capacities to a trailer?
thx
thx dude
my mod folder is empty
Why can't they reseale this on console
Kl g8 mod, could you do on for the Combines please?
how tf u have zip folders not winrar arhive in mods ?
Nice video! I did this and it's working, tks! Hey, I have an idea for a great Mod, but it's a gameplay Mod, not a modeling one. How can I start from the begining? Do you know anyone who can teach?
didnt work for me
How to incress trailer unloading speed?
Marko Tudić in the xml file hit F3 and search for something like OverloadSpeed or emptySpeed, and increase the value to whatever you like
We can try this in android