Thanks Spa Man. When you were finished, it didn't seem like you replaced the spray on foam that you removed early in the video, is it worth replacing the foam? Does it aid in the insulation of the hot tub?
Awesome video i have watched most of your content and its helped fix my Hot tub more than once much appreciated from a diy'er, a good friend wants me to find the leak in her hot tub i took a few panels off and it is totally full of foam can you tell me where to start? I checked in and around the panel box, heater and pump no leaks? Thanks for any info
Barry's favorite tool looks a lot like Dave's Favorite tool! Scott, Have you tried using oil filter pliers instead of the Channel Locks? I have both but never use my Channel Locks anymore. Also, Sweet video, That looks like a 2004 J-355 , got one just like it in my driveway for free, if you want it? Keep em coming, good repair vids like this are hard to find :) Thank - You
Depending on the maintenance being done typically around 7 years or so.. Really gets down to the maintenance being done or not done and where in the us the hot tub is the problems I see in Arizona you will not see in states that have snow for 6 months of the year ..Hope this helps Thanks for Watching & SUBSCRIBING
Thank you for this fine video! I have a Boca Grande 10000 I believe from 2005. The entire cabinet and frame rotted out and animals ate some wires and hoses. The bottom is also rotted out. I want to attempt to fix it. I will build a new frame, although I'm not sure how to tackle the bottom yet, but I'll come up with something. There is a kit to create a new cabinet, but it requires a sturdy frame. I feel it will be considerably cheaper than a new ones and everything else is fine. What are your professional thoughts on taking this on? Is it worth it? Or is it a tail chaser.
Great video. So you are reusing the white gasket and using silicone on it, correct? What would happen if you replaced the gasket and no silicone? Isn't that how they are done from the factory? Just using the rubber washer or gasket? I'm about to tackle a 2005 Maxxus and want to get everything ready.
Every manufacture does it different some will use silicone and some will not. on this repair I did use the old gasket because I did not have the size I needed and it was still in great condition. If the gasket was out of round, dried out, torn or damaged in anyway I would not have reused it. I just about alway use silicone on certain repairs.(a leaking jet I usually do) the reason why I will usually use it is I do not have the time to go back and redo it a second time and to date I can't remember ever having to redo a leak I fixed EVER! Hope this Helps You and Thanks for Watching & SUBSCRIBING Let me know how your repair goes...
Great Video! I have a leak in my Jacuzzi J330 and can not pin point it, this video helps a ton. The very strange thing about my leak is that is doesnt leak consitatnly. Sometimes when its coldout it leaks. This last summer hardly leaked. Any idea why? Also, I live in a colder climate how do I re-insulate?
Yes had this happen several times over the years. When it is cold out the gaskets or seals get really hard and sometime this will cause a leak and then when it it warmer or hot outside or in the tub the leak stops..... here in Arizona some owners think that the leak has stoped during the summer only to find out that it has not... During the summer it is hard to locate a leak because the water evaporates really fast. Hope this Helps Thanks for Watching & SUBSCRIBING
I have been screwing with my hot tub and I have a big problem. I have power to pump 1 but everything is dead. I have replaced the motherboard twice and both of them don't work. Please help me out
Depends on were the leak is But for the most part I find and fix all leaks the same way...In your case I would need more details as to what is going on with your hot tub. Thanks for Watching & SUBSCRIBING
Can anyone help? I need to replace the control board on my spa. It's a Leisure Bay G2 plus super duplex. 2 pump spa. The board S/N is 52326. The chip number is G2R1B. This board is not in production anymore. Can someone help me find a replacement that will work??? Please
Good video but lordy, you talk WAY TOO MUCH brother. Also, you didn't say anything about ensuring you mating up the locking nut of the jet with the ring beneath it. There is a bevel on that ring you need to make sure is mated correctly to the locking nut....
For reference, I prefer all the talking, as it provides me with insight to your thoughts, concerns, and motivations which talking less would likely sacrifice. Thank you for a really great (and useful) video!!
Thanks Scott! Your videos are a life saver for fixing hot tubs. They have not failed me yet!
Great to see you again! Glad you are posting more videos. You have the best how to hot tub videos. Thanks
Thank You so much...
Great explanation on how to repair a spa jet.
Great video! I hope you have more coming out soon
Nice, well done!
Holy moly SPA MAN it's been a while hope everything is okay.
I am doing well Hope you are also...
Great video, thanks! Do you typically replace the spray foam after a repair like this or would you use some type of water proof batting?
I’m curious why you didn’t re glue the tubing hoses to the jet?
Thanks Spa Man. When you were finished, it didn't seem like you replaced the spray on foam that you removed early in the video, is it worth replacing the foam? Does it aid in the insulation of the hot tub?
Awesome video i have watched most of your content and its helped fix my Hot tub more than once much appreciated from a diy'er, a good friend wants me to find the leak in her hot tub i took a few panels off and it is totally full of foam can you tell me where to start? I checked in and around the panel box, heater and pump no leaks? Thanks for any info
Barry's favorite tool looks a lot like Dave's Favorite tool! Scott, Have you tried using oil filter pliers instead of the Channel Locks? I have both but never use my Channel Locks anymore. Also, Sweet video, That looks like a 2004 J-355 , got one just like it in my driveway for free, if you want it? Keep em coming, good repair vids like this are hard to find :) Thank - You
Thanks...And Yes in my other bag I carry three different sizes of oil filter wrenches. Thanks for Watching & SUBSCRIBING
Mr. Spa man … I need help I need to repair a crack shell on my spa…. What’s the best thing to do or used fiber glass resin?
Like the video! Wondering when do you typically see leaks starting, years 7,8,9..etc? Are there some brands worse then other for leaking? Keep it up!
Depending on the maintenance being done typically around 7 years or so.. Really gets down to the maintenance being done or not done and where in the us the hot tub is the problems I see in Arizona you will not see in states that have snow for 6 months of the year ..Hope this helps Thanks for Watching & SUBSCRIBING
Thank you for this fine video! I have a Boca Grande 10000 I believe from 2005. The entire cabinet and frame rotted out and animals ate some wires and hoses. The bottom is also rotted out. I want to attempt to fix it. I will build a new frame, although I'm not sure how to tackle the bottom yet, but I'll come up with something. There is a kit to create a new cabinet, but it requires a sturdy frame. I feel it will be considerably cheaper than a new ones and everything else is fine. What are your professional thoughts on taking this on? Is it worth it? Or is it a tail chaser.
Great video. So you are reusing the white gasket and using silicone on it, correct? What would happen if you replaced the gasket and no silicone? Isn't that how they are done from the factory? Just using the rubber washer or gasket? I'm about to tackle a 2005 Maxxus and want to get everything ready.
Every manufacture does it different some will use silicone and some will not. on this repair I did use the old gasket because I did not have the size I needed and it was still in great condition. If the gasket was out of round, dried out, torn or damaged in anyway I would not have reused it. I just about alway use silicone on certain repairs.(a leaking jet I usually do) the reason why I will usually use it is I do not have the time to go back and redo it a second time and to date I can't remember ever having to redo a leak I fixed EVER!
Hope this Helps You and Thanks for Watching & SUBSCRIBING
Let me know how your repair goes...
Great Video! I have a leak in my Jacuzzi J330 and can not pin point it, this video helps a ton. The very strange thing about my leak is that is doesnt leak consitatnly. Sometimes when its coldout it leaks. This last summer hardly leaked. Any idea why?
Also, I live in a colder climate how do I re-insulate?
Yes had this happen several times over the years.
When it is cold out the gaskets or seals get really hard and sometime this will cause a leak and then when it it warmer or hot outside or in the tub the leak stops..... here in Arizona some owners think that the leak has stoped during the summer only to find out that it has not... During the summer it is hard to locate a leak because the water evaporates really fast. Hope this Helps Thanks for Watching & SUBSCRIBING
I have been screwing with my hot tub and I have a big problem. I have power to pump 1 but everything is dead. I have replaced the motherboard twice and both of them don't work. Please help me out
How do you fix a rotomold hot tub with a leak?
Depends on were the leak is
But for the most part I find and fix all leaks the same way...In your case I would need more details as to what is going on with your hot tub.
Thanks for Watching & SUBSCRIBING
@spaman5440 don't those little giant pumps have oil in them? I ordered one off amazon and there was oil all over the unit and the box.
Ive had over a dozen of them of the years and have never experienced that with any of the ones that I have owned... Thanks for Watching & SUBSCRIBING
i have a ribbed flez hose leak at the jet and dont know how to remove the hardened spray foam to clean it up. Can you offer some guidance pease
it looks just like the style at the botom of your video at 13:06
@@bobhyde4793 I have several videos that show how to remove the foam... Thanks for Watching & SUBSCRIBING
Can anyone help? I need to replace the control board on my spa. It's a Leisure Bay G2 plus super duplex. 2 pump spa. The board S/N is 52326. The chip number is G2R1B. This board is not in production anymore. Can someone help me find a replacement that will work??? Please
Call the off ice a nd talk to Scott...
Thanks for Watching & SUBSCRIBING
@spaman5440 I talked to a guy online. My system is actually a 1 pump but he said I needed to do a retrofit and recommended the Gecko YE5
When dumping the hot tub , don’t cross contaminate the water by dumping into the pool.
Why not?
@@byronhadley9662due to higher water temperature,the possibilities of fecal shedding may cause E. coli.
Good video but lordy, you talk WAY TOO MUCH brother. Also, you didn't say anything about ensuring you mating up the locking nut of the jet with the ring beneath it. There is a bevel on that ring you need to make sure is mated correctly to the locking nut....
Thanks for Watching & SUBSCRIBING
For reference, I prefer all the talking, as it provides me with insight to your thoughts, concerns, and motivations which talking less would likely sacrifice.
Thank you for a really great (and useful) video!!