In 2019, I watched this video a lot on the TV in my little cousin's Oman home in 2019. The nostalgia still holds up. In 2024, a lot has changed and my motivations have completely changed.
In 2019, I watched this video a lot on the TV in my little cousin's home in 2019. The nostalgia still holds up. In 2024, a lot has changed and my motivations have completely changed love these videos
He fits everything together so neatly. I'd have excess wires hanging out and have to cut extra holes in the case because I put the board in sideways or backward. Nice job! I just might give it a try.
Hey! I remember watching this video in 2019 when I was a kid. I became so obsessed with this Raspberry Pi, Windows 10 and even making my own laptop at home in late 2019 but I gave up on the thought. A lot has changed today 2024. I'm a RUclipsr now
@@Grey-Troll wym the screen had a screen protector on when he touched it the fingerprints you see on the digitizer is from him removing the protector on the digitizer.
@Accurate Mediator HD CH1 Not just that. It really isn't worth the hassle. It's a weak and small tablet, you're better off buying an old Surface tablet.
berfranper yeah, also if you are going to then make sure that they are all charged to the same amount, or if they deplete faster than others it could cause a short circuit
Yeah that's why I think that making your own device with just regular batteries is bad that's why refurbished devices can be bad because of the batteries sometimes and could explode this video is cool but not worth it
MLag if you search the youtube videos you will find one that covers making a DIY spot welder from an old motorcycle ignition coil and battery with insulated copper nails and a push to make switch. This is the best method by far for tagging lithium cells as it is highly predictable and avoids overheating them.
Why everyone thinks that Li-Ion will explode when you solder them?? Where did you get this miss-information from? Does no one understand that it's necessary to solder batteries, otherwise they are more or less useless! What are doing with a battery cell that you can't solder? Do you you really think you put them all in battery-holders, even if you put 1000 of them in a car?
@@vfs_0 Thanks for your response... if u dont mind could u please make one for me... bcoz i dont hv idea on these things... if i try to do this there would be some damage from me like brekage in screen or touch while assembling.. hope u understand
I'm impress by his handy and nimble assemble of the pc. I guess people dislike the music choice? I always have sound on muted. That might help me elevated the problem.
Yes, cause there're were CRAZY, his inventions were cool. I never have these before. The one that says his inventions bad they addicted to the judger medicine and they drank a lot of wine and there're were IDIOT!
Yes its true even though the lack of liquid chemicals in modern batteries reduces risks of damage and explosions due to boiling, you should be very fast at doing that anyway... And maybe just melt the wire a little before attaching it, for sure its wrong to leave a "pool" of molten metal in the battery`s surface.....
I hate all the negative comments of people saying stuff like, "I'm not rich like you I don't have a 3d printer." Ok well not all, but quite a few libraries have 3d printers that are available to the public for pretty cheap....
Thanks for this great video, I appreciate it. Jesus bless you. Don't bother with all the negative comments in the comment section. You're doing a good job.
that was amazing and it was super duper cheap i made this pocket pc and i is now my main computer thanks for making this video and telling us how to make a windows tablet
Pretty interesting. Only major issue as someone not that into electronics, but kind of a no brainer is, will this not over heat? No vents or a fan for cooling. Even I know that something that small needs some way of cooling off, especially if used for more than just a few minutes at a time.
Let me start by saying I think this was a cool project. Good job. I personally don't think you can't take an off the shelf SBC and use battery cells like that and ever hope to fit it in a normal "pocket". You'd have to create your own PCB and use a thin and flat battery. I'd love to see a project done like that. Keep working hard.
I’ve been looking for a way to spend weeks sourcing materials, constructing and wiring together a tiny screen to play GTA Vice City on. Thanks internet!
No heatsink?? That CPU is gonna throttle badly when running something demanding. Trust me, the thin aluminum shield on the Latte Panda isn't enough to cool an Atom Z8350 efficiently. So no wonder why people complain about its bad performance :p
@@metalphantom970 when not sufficiently cooled. yea. it usually throttles around 80°C, depending on the dptf configuration. Another reason to grab an Atomic Pi. It got a massive heatsink. but only has a 16GB EMMC.
yea I'm saying that because GTA Vice City and even San Andreas run a lot better on my Tablet and Intel Compute Stick which have the same processor. And knowing it does throttle when reaching higher temperatures.
@@NexXxus86 GTA San Andreas for pc was released many years ago and it's normal not being optimized like the version for mobile phones... Also, gta sa runs 30 fps max with this cpu at low and middle settings only so... I prefer to buy a normal tablet :p or just save up some money for a pc :)
Wow, that will give a desaster, when people who just don't know what they are doing are starting to solder these lithium batteries without solder-tails with a budget solderiron from the hardware store, heating them up until they explode... Also that headphone plug next to the BMS without any isolation - wow - just wow, this becomes a "how to build a bomb" guide for most noobs out there 😝🤯
Nice and ingeniously done. But, another $200 bucks and you have a Surface Go. Fairly compatible but the Go is much more sleek and capable. I do love the DIY stuff though. Great job!
187+shipping for the parts, up to 80 bucks for the 3D printed parts if you don't have your own printer, and you didn't include the switches, batteries and so on. If I'm being very generous with the shipping + duty fees, that's 350 bucks, the price of a microsoft surface go that's orders of magnitudes more powerful.
It’s perfect for those who need a potable Windows or Linux based touch screen solution. For instance, I would use one for recording to Reaper/ProTools and also control my interface (Midas 18 Channel) all in one sitting. The transfer of the project to another PC or Mac would be a breeze - compared to doing so on an iPad or Android tablet. Android and iOS are limited. I’m currently using an iPad to to control my interface and then using a MacBook/Laptop or my Mac Mini to record into. This little device would eliminate the bulkier recording solution and the need to find a efficient way to transfer my stems to my DAW (Logic Pro X or Reaper).
More like max 15fps prolly 3fps avrg drop frames crazy too although I've seen the same board without a case on it hooked up to a 1660 GPU and it ran games that are single core optimized like a champ some of them over 100 FPS it's a serious CPU bottleneck though basically a Celeron
That's a great little project but one thing I would change is making some kind of spring clip box or tray for the batts, then no soldering and easily removed if needed.
@@arelypacheco3326 and so with the LittePanda v1.0 board which he did not made and just practically a miniaturized computer running with Windows 10 Operating System. I understand that this is something you can be proud off when you are a child and practically new to DIY.
This cost WAY MORE THEN $119 my friend don't be silly look up the price of individual parts to do this, you could buy an i7 laptop with a1660 video card for what you paid for this Heat box that will burn out that expensive lattepanda in a matter of months....
![[ENG SUB] Let's make a tablet with a broken LCD smartphone - Making a Dex tablet](http://i.ytimg.com/vi/6SAfctbAfNA/mqdefault.jpg)
![[ENG SUB] Let's make a tablet with a broken LCD smartphone - Making a Dex tablet](/img/tr.png)
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
In 2019, I watched this video a lot on the TV in my little cousin's Oman home in 2019. The nostalgia still holds up. In 2024, a lot has changed and my motivations have completely changed.
for real bro
Me too
@@TriSadono Yes
I love DIY videos that basically start with: "on your 3d printer..."
@@EmirFaruk Some people like me can't afford one in today's economy
Adam Kołakowski: He only used the 3D printer to make the enclosure... You can easily make an enclosure for such a small device. Easy.
some people cant understand satire 😁
@@EmirFaruk aga bizim okulda var da karı dokundurtmuyor
Thanks and wonderful amazing Vedio. Very worthy my congratulations. Can i get from? It available call me 9385472143
In 2019, I watched this video a lot on the TV in my little cousin's home in 2019. The nostalgia still holds up. In 2024, a lot has changed and my motivations have completely changed love these videos
He fits everything together so neatly. I'd have excess wires hanging out and have to cut extra holes in the case because I put the board in sideways or backward.
Nice job! I just might give it a try.
😴
Super idea. This computer is small, wirelles and homemade - so it is brilliant...👍👍👍
Hey! I remember watching this video in 2019 when I was a kid. I became so obsessed with this Raspberry Pi, Windows 10 and even making my own laptop at home in late 2019 but I gave up on the thought. A lot has changed today 2024. I'm a RUclipsr now
Allow me to know Total cost for building this pi handheld,bro,plz
hey there is something wrong in the bms you should connect the regulator to charge connector not to the battry it self it's call "charge/power"
I cringed when I saw that....😅😅😅😅
gotta love those fingerprints in between the digitizer and screen.
was thinking the same thing.... xD that's coming back apart...
@@Grey-Troll wym the screen had a screen protector on when he touched it the fingerprints you see on the digitizer is from him removing the protector on the digitizer.
@@DayV914 must have been between one of his jumpcuts... but when he's installing the digitizer, you can see two fingerprints on the lcd
and the lint and dust
Aaaaand that's why we use gloves, kids.
A portable Windows Devices! I love it!
You should seriously sell this as a kit with all the supplies, it would take off like a rocket!
@Accurate Mediator HD CH1 Not just that. It really isn't worth the hassle. It's a weak and small tablet, you're better off buying an old Surface tablet.
The parts alone cost more than 200$. Do you really want it for that money?
Don't try to solder lithium batteries, they may explode and severe your hands.
berfranper yeah, also if you are going to then make sure that they are all charged to the same amount, or if they deplete faster than others it could cause a short circuit
Yeah that's why I think that making your own device with just regular batteries is bad that's why refurbished devices can be bad because of the batteries sometimes and could explode this video is cool but not worth it
warfare 1212 yeah you can get a decent battery pack for like 3 bucks on like any website
i tot for a sec the rod stuck....kaboom
It did not happen with him so I am going to use this method repeatedly.
Anyone can make that thing at home. I want to. Brilliant!
Y u have Samsung wallpaper as your profile 🤔
When I watched you solder the batteries, my stomach clenched as you solder them for a long time.
I translated it via Google. I'm from Russia.
MLag if you search the youtube videos you will find one that covers making a DIY spot welder from an old motorcycle ignition coil and battery with insulated copper nails and a push to make switch. This is the best method by far for tagging lithium cells as it is highly predictable and avoids overheating them.
Привет))
I see no problem
Не вижу проблем
Why everyone thinks that Li-Ion will explode when you solder them?? Where did you get this miss-information from? Does no one understand that it's necessary to solder batteries, otherwise they are more or less useless! What are doing with a battery cell that you can't solder? Do you you really think you put them all in battery-holders, even if you put 1000 of them in a car?
@@keepchrispy8589 lmao all i can imagine is female information
Omg I can see myself right now getting shocked or even blown up..still want to try it... great job 👍🏽👍🏽👍🏽
3x 3.7 volts will deliver a lethal shock-BE VEWY CAWEFUL.
@@timothygodfrey4950 lol
Yhaa it's fast ⏩ very fast
Clean DIY bro👊
I made the tablet by using your video, it actually worked!!! I’m impressed
DA Kyrim me too... it was so essy
How much it costed for hole tablet to make....
MUK Drummer lmao sry I don’t remember because I did this 6 months ago, if I find out the total, I’ll reply to u
@@vfs_0 Thanks for your response... if u dont mind could u please make one for me... bcoz i dont hv idea on these things... if i try to do this there would be some damage from me like brekage in screen or touch while assembling.. hope u understand
Thanks for sharing, I'm watching this while buying a windows tablet.
Goooood👍
Why does this person get bad comments always,we have to appreciate him
Because this is ad. I think the processor very slow for 2019 year.
Fortunately we do not 'have' to do anything
I'm impress by his handy and nimble assemble of the pc. I guess people dislike the music choice? I always have sound on muted. That might help me elevated the problem.
Yes, cause there're were CRAZY, his inventions were cool. I never have these before. The one that says his inventions bad they addicted to the judger medicine and they drank a lot of wine and there're were IDIOT!
Wait, one more thing they also say your music is worst sorry dude I can't control this maybe they jealous of you?
One care to be taken is to not overhead the 18650 batteries with soldering iron. It can cause huge damage to the batteries
I was having a panic-y feeling as he was doing that. Just waiting for them to burst.
Yes its true even though the lack of liquid chemicals in modern batteries reduces risks of damage and explosions due to boiling, you should be very fast at doing that anyway... And maybe just melt the wire a little before attaching it, for sure its wrong to leave a "pool" of molten metal in the battery`s surface.....
Yes and casing for batteries is easy to obtain or just print. Then you can change dead ones for fresh.
Anyone else noticed they soldered right over the vents?
he makes many many mistakes in the video.
I hate all the negative comments of people saying stuff like, "I'm not rich like you I don't have a 3d printer." Ok well not all, but quite a few libraries have 3d printers that are available to the public for pretty cheap....
Drives to Walmart buys 50$ Android tablet after watching this video
And...?
@@r21747 And tears it down to make a new one 😂
they're only $69 with Windows 10.
@@tfgbd not including windows 10
@@tahsheemusman8047 hahaha
Good video, horrid soldering jobs but hell it turns on I guess
seen worse from professional products tbh
Yeah, that soldering burnt my brain a little.
Good job bro op I like ur videos REALLY :)
Great little project, well done! I had to turn the sound off though!
Thanks for this great video, I appreciate it. Jesus bless you. Don't bother with all the negative comments in the comment section. You're doing a good job.
that was amazing and it was super duper cheap i made this pocket pc and i is now my main computer thanks for making this video and telling us how to make a windows tablet
nice bro I am very inspired by your videos please now make video on smart watch and smart glass please
Watch dd electrotech
Why don't you ask him if he builds a fucking space ship
@@terrandroid haha lol
@@terrandroid lmao
How about building a brain for You?
"Ferb, I know what we're gonna' do today!"
JC King Mom Phineas & Ferb😂😂🤣🤣🤣
Busted! - Candace
“get our hands blown off”
it's a big project
IS THAT ME!!
Very very nice ❤️👍🏻👍🏻👍🏻 I loved it ❤️❤️❤️🙏🏻
sweet windows box man. I'd love having one
I'm actually really impressed with the current state of technology, it works🤔🤔
I was considering using a Pi 4B 8GB RAM, but now that computer board has caught my attention.
Use Pi 4B, its faster and cheaper than Lattepanda
Can you suggest for me bto
@@strangerisOPboy
Want Linux? Pi
Want Windows? Lattepanda.
Idk, RPI runs ARM.
@@amogus7 Yes, for Windows and I’ll connect it with tv or mobile
@@strangerisOPboy also pi used like for media servers and retro console emulators
Can I use Raspberry Pi 3 for this
😃😃😃 Your videos are really amazing....
Uncle your the best
Raspberry can not hold Windows 10) 😂😂😂
This guy: Creates Windows tablet
Microsoft and their Surface: *We've been tricked, backstabbed, and quite possibly, bamboozled*
Lol
THIS NEEDS TO BE IN THE STORES
Super awesome idea *Mr. Wrench*.
Keep it up 👍👍👍👍
Braver man than I to take a sodering iron to an 18650
lol, I was hoping I would find someone mentioning this in the comments. He will learn when one goes into thermal runaway.
Homie shoukd diy a fucking spotwelder first
He can use a solder paste and hot gun or sticking solder plugs u get on American Amazon site for all purposes no need of soldering
Or just get a battery holder, it's like 2 bucks.
Lol, his iron must be on low.
Finally i can play cyberpunk in 1 fps
🎉
Owner: Makes Windows10 tablet pc
Me: *_Downloaded Windows10 simulator_*
Me: *Downloaded VMWare workstation on my pc*
@@тестирование me: downloaded virtual box on my laptop
*******
@@skuygaming466 keknya kita nyasar dah😂
@@CEKIKOFGAMERS balek yok nyet
Pretty interesting. Only major issue as someone not that into electronics, but kind of a no brainer is, will this not over heat? No vents or a fan for cooling. Even I know that something that small needs some way of cooling off, especially if used for more than just a few minutes at a time.
Wow after waching it I became a fan of you
love you keep making these type of videos
Let me start by saying I think this was a cool project. Good job. I personally don't think you can't take an off the shelf SBC and use battery cells like that and ever hope to fit it in a normal "pocket". You'd have to create your own PCB and use a thin and flat battery. I'd love to see a project done like that. Keep working hard.
I agree with you
I’ve been looking for a way to spend weeks sourcing materials, constructing and wiring together a tiny screen to play GTA Vice City on. Thanks internet!
actually, im watcing this content also to play gta lcs, in portable ways
Wow so amazing and less cost
Amazing!😍 But, did it have any problem due to the lack of fan?
No man,
He already has 1.77 million fans
Just kidding😄😄
I mean cooling fan😂
That's a nice question. That should be a problem for him.
No heatsink??
That CPU is gonna throttle badly when running something demanding.
Trust me, the thin aluminum shield on the Latte Panda isn't enough to cool an Atom Z8350 efficiently.
So no wonder why people complain about its bad performance :p
I am also doubt that the 5V regulator can supply 3A for LattePanda
that atom... it goes to 80-85°C when playing old games (2000-2001) lul
@@metalphantom970 when not sufficiently cooled. yea. it usually throttles around 80°C, depending on the dptf configuration.
Another reason to grab an Atomic Pi. It got a massive heatsink. but only has a 16GB EMMC.
yea I'm saying that because GTA Vice City and even San Andreas run a lot better on my Tablet and Intel Compute Stick which have the same processor.
And knowing it does throttle when reaching higher temperatures.
@@NexXxus86 GTA San Andreas for pc was released many years ago and it's normal not being optimized like the version for mobile phones... Also, gta sa runs 30 fps max with this cpu at low and middle settings only so... I prefer to buy a normal tablet :p or just save up some money for a pc :)
I like this type of tiny PC
Good one bro....but quite expensive...😅
Wow, that will give a desaster, when people who just don't know what they are doing are starting to solder these lithium batteries without solder-tails with a budget solderiron from the hardware store, heating them up until they explode... Also that headphone plug next to the BMS without any isolation - wow - just wow, this becomes a "how to build a bomb" guide for most noobs out there 😝🤯
Agreed 🤣
😀
I never can but l love watch your video
Pretty damn cool!! Nicely done. An excellent product. Thanks for sharing with us.
Ummmmmmmmmmmmmmmmmm. I definitely need that .
Mom: Study hard so that one day u can build it.
Underrated 😂😂😂😂
sad very sad
Good
Nice and ingeniously done. But, another $200 bucks and you have a Surface Go. Fairly compatible but the Go is much more sleek and capable. I do love the DIY stuff though. Great job!
Me: wow diy I will make it
Also me after watching the video: let it go I don't wanna do all this stuff
Instructions unclear, just created an iphone 17s by mistake. ☹️
LOL
iPhone 9
Anmol Biswas sad
Dude, Really? I accidentally made the jPhone 4s. Yup, the jPhone 4s.
LOL LOL LOL LOL LOL
such a wonderful project i have ever seen but i had a question how to power up the mini pc that you made with your efforts
That's the coolest thing i've ever seen :D someday i'll get a 3d printer... jump on that badwagon!!!
POV: You watch this for fun, and cause you don't have a 3D Printer.
OoOoOooOOo genshin impact
@@glxck8894 u play that game as well? Though I'm rly weak XD
I could do a case with my hand i dont need a 3d printer i just need lattepad things
එන්න
This man is the god of technology
If I understood how to do this,I would’ve made my own tablet and phone by now. 🥴
also you can put more than 50 batteries in it.
Easy just follow what he did and improvise the enclosure if you dont have a 3d printer.
U need to give it a ventilation... The machine will over heat
Probably not to be honest a lot of these little things like the raspberry pi don't really thermal throttle even in pretty harsh conditions
Try to put heat sink
@@chapzer6686 yes its I get u but,the device is running windows 10. You will be surprised what candy crush will do yo this device
No ventilation, heat sync, and poor soldering techniques guarentee a broken device somewhere down the line
weldone brother very nice
Cool now send it over to jerryrigeverything
Im guessing scratches at lv6 with deeper grooves at a lv7.
Now for the Bend test
Hi
187+shipping for the parts, up to 80 bucks for the 3D printed parts if you don't have your own printer, and you didn't include the switches, batteries and so on. If I'm being very generous with the shipping + duty fees, that's 350 bucks, the price of a microsoft surface go that's orders of magnitudes more powerful.
i have a ryzen 3 2200g build thats cheaper than this.
Best comment for sure..
you can get HIGOLE F1 5 inch 720 x 1280 Pixels Mini PC all already done for 299.00 same size
But you can’t sneak a surface into school 😂
Amazing creativity
Nice video 👌👏 but everything that u use is expensive 😂
Yes ! 😄😄
Except Connecting, nothing else is DIY
Wow, this PC looks amazing. Will be lattepanda alpha version?
No it doesn’t
Amazing projects
7:09 gta vice city stories PC mod 😍
Ok??
@@jaiden5447 just i love this game
Gta vice city stories doesn't realesed for pc strange I think he is using emulator
Man, for us old(er) tech enthusiasts, Pocket PC is a way different platform.
Ozzelot I suggest a GPD Pocket. Great little thing. I wouldn't trust it with Windows, but luckily it works great with Linux preinstalled.
i see tihs video 15 ups 16 times
I LOVE TIHS VIDEO
thank you , it's amazing , but i would love the option to plug earbuds or bluetooth earbud XD
LattePanda comes with bluetooth and wifi I think
instead of attaching the speaker with the 3.5mm he should've just put an extension that way you can add and 3.5mm audio thing.
Me: This will be easy
Soldering parts: Well yes but no
A Minecraft Guy • 69 centuries ago Just take time, you can do it!
You can do it. How old are you my friend?
I do soldering when i was 9
Speed slow he par bhi Tum to great ho❤️
Amazing. So lagging. 😁👍
Lag in San Adreas lol
Bro hearted this 💀
Yay. Ill better buy already assembled one. Latte panda board is expensive
Nice bro 👍🏻👍🏻👍🏻🤗
PLZ sell those, I would love to have that!!!! :DDD
also anything about battery temp? soldering an knifing battery? iffy
@Raghavendra Bestha thats not the point
yeah I was like "AHHHHH NOOO" when he was soldering directly onto the battery contacts. I've learned not to do this the hard way.
Corre el riesgo de explosión, no deben calentar las baterias con el cautín
@@Pet_Hedgehog you're a tool.
yusuf tekten rdg5
I am watching this channel since 2015
DAMN! THAT WAS AWESOME! Is it possible to make an e-ink display version of this? Is there a touch screen one too?
Definitely not unfortunately, especially with windows. No one out there makes a 7 inch e-ink display
2009 tutorials: TRANCE 009 SOUND SYSTEM DREAMSCAPE
2019 tutorials:
Or Paralyzer or Let The Bodies Hit The Floor
Wow what a great computer
Diy or Buy? It seems to me that for that BoM you can buy a pre-made tablet which is better from every point of view (performance, size, weight).
its fun to build but definitely not cost effective u can get decent spec tablet pc or even a netbook for that price
Without taking The tools price into account
It’s perfect for those who need a potable Windows or Linux based touch screen solution. For instance, I would use one for recording to Reaper/ProTools and also control my interface (Midas 18 Channel) all in one sitting. The transfer of the project to another PC or Mac would be a breeze - compared to doing so on an iPad or Android tablet. Android and iOS are limited. I’m currently using an iPad to to control my interface and then using a MacBook/Laptop or my Mac Mini to record into. This little device would eliminate the bulkier recording solution and the need to find a efficient way to transfer my stems to my DAW (Logic Pro X or Reaper).
How many USB ports do you need? The Surface Pro 3 had what you need.
daymn! he could start his own phone company!
Few more things to add, GPS, and 4g/5g Modem... not hard...
Woah I love watching the same concept over and over a million times
Powerful Windows 10 Tablet. Plays GTA: SA at 15FPS.
and it itsn't even GTA: SA, its Vice City Stories beta 3 for pc xD
@tyurik that's mac
More like max 15fps prolly 3fps avrg drop frames crazy too although I've seen the same board without a case on it hooked up to a 1660 GPU and it ran games that are single core optimized like a champ some of them over 100 FPS it's a serious CPU bottleneck though basically a Celeron
Amazing, Develop again, maybe you could make your own product
VERY GOOD IDYA FOR PC
"How to put a LattePanda SBC into a box"
It's my "LattePanda"
@@imphugaming81 what do you mean its yours?
Owner: *MAKES PC TABLET*
Me: *INSTALL PC SIMULATOR*
Do u mean pc building simulator
@@floorismadeoutoffloor4319 no PC simulator its a mobile PC building game
I love this thing so much 😍
Edit: no way my oldest comment
I believe 0.5x is the real speed
or maybe even 0.25x
somewhere between those 2
Actually I think it’s 0.75x
The video was great, the music makes me want to shove a ice pick in my ears. Please don't ever use that music again 😭
Mark shaz it’s great you dingus
@@deadchannel9861 it
SUCK
david pufnić *i guess you kinda right...*
@@deadchannel9861 yes
Bumbumb
That's a great little project but one thing I would change is making some kind of spring clip box or tray for the batts, then no soldering and easily removed if needed.
They’re li ion. They stay puf
119USD, I can already buy a descent Windows 10 tablet with that.
But if you buy that, you can't say "I made this" haha
@@arelypacheco3326 and so with the LittePanda v1.0 board which he did not made and just practically a miniaturized computer running with Windows 10 Operating System. I understand that this is something you can be proud off when you are a child and practically new to DIY.
Cuz you stupid. you don't have the brain to make a pen
This cost WAY MORE THEN $119 my friend don't be silly look up the price of individual parts to do this, you could buy an i7 laptop with a1660 video card for what you paid for this Heat box that will burn out that expensive lattepanda in a matter of months....
@@n.lightnin8298 where are you getting that laptop that cheap
Why am i watching this at 3am in the morning 😕
So am i
I love it very beautiful
For playing pubg
This is best 👍💯👍💯😜
No bcz ram is only 2gb
@@piyush125 If you think ram is the main thing, you are absolutely stupid.
Goldtom Productions its not the main thing but it holds an important, less ram more stutters
@@teraskull it's not main think but its play an very important role you can't play game like pubg in 2gb ram device
@@piyush125 processor is the core lol