Absolutly amazing video can i just ask do you havw to peogram once new strut fitted? Also if theres a peoblem.with cylinder leak on the rear whats the peocess please Nedding for a 730 2013
Nice I’m a Harley mechanic and it’s the same process to rebuilt a set of forks you might have helped me out biggggg time where do we buy the rebuild kit ?
Nice job. I'm trying to find why after replacing with a brand new strut I get a clunking sound when the car is shaken (like speed bumps). 3 screws up top and 1 big one underneath...all tight. Could a defective strut have something loose inside is what I'm trying to figure out...is it even possible?
Did you have the noise before replacing the strut ? Or it started after replacing the strut . I would double check all the bolts . I wish I could hear the noise to be able to assist better. But it’s unlike that the strut it self would make the noise .
@@eagoleye after replacing the strut. When the old strut blew, I did have to ride on the right bump stop for a few miles, so something could have been damaged. It sounds like something is moving freely back there. Seeing in the video how tight everything is in the strut, I doubt it's the strut as well. I guess I'll just have to take apart the rear...thx for the reply!
It dose not need a calibration if you are using the original struts with its module. But if you replace the strut is will need a PROGRAMING and the ride hight calibration my friend.
Hi , i think my bmw e66 air suspension has leaks , the car sagging on down low . Anyway I bought an another air suspension from a brand named Kaxton air suspension. The part number matched the original bmw suspension part number , but the length of the kaxton air suspension is around 4 to 5 inches shorter in length compared to original bmw air suspension. Is it going to be a problem if i install the shorter Kaxton suspension on my e66
I’m not sure. The night is important , but you can try installing the shorter strut and performer a right height adjustment. If you don’t get an error you will be fine, otherwise you’ll have to find the correct size. Call dealership with your vin number and get the correct part number and try to find the right rebuild kit. Hope it’s helpful .
Changed my F02 air spring succesfully today with this tutorial video. Thanks alot!
You are welcome. Good job my Friend
really informative video, good job! think this is the only proper video on how to do this
Thank you guys 🙏🏻
Great video! Did it your way and it worked like a charm. Thanks!
Красавчики сделали четко
Absolutly amazing video can i just ask do you havw to peogram once new strut fitted?
Also if theres a peoblem.with cylinder leak on the rear whats the peocess please
Nedding for a 730 2013
We use ISTA which is original BMW software to program a brand new strut. But when you rebuild the strut no Programing is needed.
If the actual cylinder is damaged then you would have to replace the strut with used or new. The repair kit only have the seals and orings.
Great Video and thanks ( tiny tiny thing... @ min 10 I think you forgot to put on the 4th ring ). But really, very very much appreciate your video
no hi didnt
Interesting.There are 3 black rubber seal and one green seal that come with the kit. The top ring is great there rest are black 🙏🏻
Nice I’m a Harley mechanic and it’s the same process to rebuilt a set of forks you might have helped me out biggggg time where do we buy the rebuild kit ?
From eBay . They are available
Call dealership with your VIN number and get the part number. Then find the correct kit .
Great video, out of curiosity where can I get the seals
Nice job. I'm trying to find why after replacing with a brand new strut I get a clunking sound when the car is shaken (like speed bumps). 3 screws up top and 1 big one underneath...all tight. Could a defective strut have something loose inside is what I'm trying to figure out...is it even possible?
Did you have the noise before replacing the strut ? Or it started after replacing the strut . I would double check all the bolts . I wish I could hear the noise to be able to assist better. But it’s unlike that the strut it self would make the noise .
@@eagoleye after replacing the strut. When the old strut blew, I did have to ride on the right bump stop for a few miles, so something could have been damaged. It sounds like something is moving freely back there. Seeing in the video how tight everything is in the strut, I doubt it's the strut as well. I guess I'll just have to take apart the rear...thx for the reply!
Gear video, Very informative. During the strut break down the black cylinder where the o rings go is where the hydraulic fluid is?
There is no hydraulic fluid. It’s an air suspension .
Nice video.
Can I remove it to but coil spring in, my air not working right
Excellent 😊
It looks like self levelling suspension. Do they need calibration after reconditioning and refitting?
It dose not need a calibration if you are using the original struts with its module. But if you replace the strut is will need a PROGRAMING and the ride hight calibration my friend.
a hydraulic press is not required for the new air suspension???
Not for these type of struts .
Hi.which website to order the parts
Do you use Vaseline instead of grease?
Either one would work 😁
good vdo
Than you!
where do you buy the parts I can do the labor ! but where do I get the air bags
You can buy them on eBay. They are available on eBay .
please can i send my rear suspension inn for rebuilt 2010 bmw 750li
Nice video!
where did you bought rebuild lit from
On eBay my friend
Hi , i think my bmw e66 air suspension has leaks , the car sagging on down low . Anyway I bought an another air suspension from a brand named Kaxton air suspension. The part number matched the original bmw suspension part number , but the length of the kaxton air suspension is around 4 to 5 inches shorter in length compared to original bmw air suspension. Is it going to be a problem if i install the shorter Kaxton suspension on my e66
I’m not sure. The night is important , but you can try installing the shorter strut and performer a right height adjustment. If you don’t get an error you will be fine, otherwise you’ll have to find the correct size. Call dealership with your vin number and get the correct part number and try to find the right rebuild kit. Hope it’s helpful .
What is the part number of the repair kit? Where can I buy it from?
Here is the link my friend
I could not see the link... Can you please repost it ?
Hi sir, does Range Rover sport 2007 can rebuild suspension?
Yes sir
Also do you offer a rebuild service?
Yes sir
Звери