Too bad the tool trucks don’t sell good head lamps. I always see these guys with a flashlight in their mouth. A head lamp is very handy when wrenching in dark places. Nice work.
Wish you guys were closer so i could have brought my truck there. Ended up towing it to vermont to a muldoons dealer for rebuild. The extra shipping and core charge off the bat wasnt in the budget
Only thing that would piss me off is the rear main seal housing gasket was completely ignored, usually i see leaks there also. Yes its more work to do that, but you cant ignore it when you are that far in.....
If you do rear main seal housing you may as well plan on an oil pan gasket since it almost always tears when removing the housing. Doing the rear main this way only costs around $100 and if there are no signs of the other gaskets leaking it's a cheap fix.
@@Street_Tractor59 I ripped it all out and did a half-ass fix I found on the forums about 5 years ago. It’s a G56 truck and I’ve had it over 7 years so I don’t even bother anymore 😂 one of these days I’ll yank it back out and re-solder everything.
I was just going to comment on the dirty hoodie myself!!! I was a tech for a long time and the easiest way to get fired was to get someone’s interior dirty!!!! Use something to cover those seats!!!
That’s what a responsible owner does!! I’m very proud of your action and that’s why if I ever had anything done to my dodge, it would be with your company!!!
some people forget a pick up truck was made for work🤷♂️ that mans sweater wasn’t very greasy he barely had a brush of dust on his shoulder You slap the seat a couple times and it’s good to go Better safe than sorry though If I pay somebody approximately $8700 to work on my truck I’m not going to be that worried about if they had to brush the dust off my seat I just want the job done right That’s just my two cents
@@lydiapulver669 I hear ya and your 2 cents worth is good but I think it comes down to customer respect! You must respect whoever vehicle you are working on and I’m glad that firepunk saw it that way too!
* Can someone please answer, i have been looking for Lavon white 3rd gen FRONT BUMPER can’t find it anywhere i would pay money just to know where he got it or the name
Looks like the owner needs to invest in some front end parts now. Steering looked sketch. Just did this on my back in a cold garage. Took me 2 full days so I guess that’s not too bad if they do it in one. Don’t want to do it again though!
They are both good. superior kits tend to be simpler for the average guy. Transgo usually has more options for more small tweaks. They all offer the main corrections over factory faults.
@@FirepunkDiesel I have all the sonnax stuff in my 48re but engine let go at 93 thousand and now I had to take the engine back to the other machine shop cause homie didn't do the align hone right I drove the block to power driven and had it fire ringed and my friend Wayne at county automotive in San jacinto CA bored the block 40over cause I had scratches in cylinders 5&6 OVER yea come on 😂🤣
@@FirepunkDiesel I'm always watching your guy's video A all ya all know your shit I wish I lived in west Virginia where my brother and sister in-law live cause I would of took you my block to get the match Chin work done a that's Mexican word of the day I'm Mexican 🌮🌯
We also did , new u-joint in rear driveshaft, rear main seal, EFIlive tuning with 5 position switch and trans install and including sales tax it was $8574 out the door.
@@FirepunkDiesel Not a bad price. The efi live set up alone is about a grand. Which trans was it? Not sure why I did not see this comment 3 months ago.
I had this exact “same day” install done on my truck. It was ready to go middle of the afternoon. Best money I’ve spent in the truck to date
How much did it cost.
How much it was?
That tach needs some love lol
Too bad the tool trucks don’t sell good head lamps. I always see these guys with a flashlight in their mouth. A head lamp is very handy when wrenching in dark places.
Nice work.
They do, Nebo rechargeable headlamps that use the 18650 batteries, they go all day!
Just pulled my 48re on the weekend. Definitely nicer than pulling a 47re, working on putting a firepunk kit in it right now 👍
Definitely an 06 with that tach 😂
My truck will be on a semi in a week or so!
Wish you guys were closer so i could have brought my truck there. Ended up towing it to vermont to a muldoons dealer for rebuild. The extra shipping and core charge off the bat wasnt in the budget
Only thing that would piss me off is the rear main seal housing gasket was completely ignored, usually i see leaks there also. Yes its more work to do that, but you cant ignore it when you are that far in.....
If you do rear main seal housing you may as well plan on an oil pan gasket since it almost always tears when removing the housing. Doing the rear main this way only costs around $100 and if there are no signs of the other gaskets leaking it's a cheap fix.
That guy that thinks he’s funny better not get in my truck with a dirty hoodie on.
Living that 2006 life 😂 my tach is the same way.
Mine aggravated me till I got it fixed lol
@@Street_Tractor59 I ripped it all out and did a half-ass fix I found on the forums about 5 years ago. It’s a G56 truck and I’ve had it over 7 years so I don’t even bother anymore 😂 one of these days I’ll yank it back out and re-solder everything.
@@joshuabrown8434 sent mine to AR Speedometer and had them fix it. Had the truck 7 years after that and it never skipped a beat
@@Street_Tractor59 I may need to look into that.
Impressive job, knocked out in a day!
I was just going to comment on the dirty hoodie myself!!! I was a tech for a long time and the easiest way to get fired was to get someone’s interior dirty!!!! Use something to cover those seats!!!
Ide be pist if that was my car.
I addressed this when I saw it and agree!
That’s what a responsible owner does!! I’m very proud of your action and that’s why if I ever had anything done to my dodge, it would be with your company!!!
some people forget a pick up truck was made for work🤷♂️
that mans sweater wasn’t very greasy he barely had a brush of dust on his shoulder
You slap the seat a couple times and it’s good to go
Better safe than sorry though
If I pay somebody approximately $8700 to work on my truck I’m not going to be that worried about if they had to brush the dust off my seat I just want the job done right That’s just my two cents
@@lydiapulver669 I hear ya and your 2 cents worth is good but I think it comes down to customer respect! You must respect whoever vehicle you are working on and I’m glad that firepunk saw it that way too!
What's up with the rpm it took the shortest route . That's new for me . I have a new converter and armet shaft . I have to drop my transmission.
5:10 what’s with the tachometer 😂
TACHOMETER LOL
* Can someone please answer, i have been looking for Lavon white 3rd gen FRONT BUMPER can’t find it anywhere i would pay money just to know where he got it or the name
I bought it from Street Scene website, but just looking now I only see it for 06+ and not for the 03-05 headlights
Looks like the owner needs to invest in some front end parts now. Steering looked sketch. Just did this on my back in a cold garage. Took me 2 full days so I guess that’s not too bad if they do it in one. Don’t want to do it again though!
I need a 48re core.
Can you do a 68 the same way.
so far we have not offered one days on the 68rfe but are hoping to be able to offer that service in the near future as we ramp up our 68rfe production
Do you guys offer this same one day install for 68's?
Does anyone know if they do the same with 68RFE’s
That’s what I need to know. I would rather have my six gears instead of four
They answered below….not yet, but they’re working on it
Back to the pile😂
You guys do this to 2019s and how much would it cost
I assumed with how many Cummins engines you work on, the shop would have a rear main installer. Instead of hammering it on.
If you're good enough at what you do. You don't need fancy tools.
How long are your built transmissions projected to last? And do you offer warranties?
They have 2 year unlimited mile workmanship warranty
What trans jacks do you guys like and or run?
A just a question ⁉️ do you guys use transgo shift kits or superior would you know if the superior shift kit is any good
They are both good. superior kits tend to be simpler for the average guy. Transgo usually has more options for more small tweaks. They all offer the main corrections over factory faults.
We modify a transgo kit and use sonnax bore repair valves when needed
@@FirepunkDiesel I have all the sonnax stuff in my 48re but engine let go at 93 thousand and now I had to take the engine back to the other machine shop cause homie didn't do the align hone right I drove the block to power driven and had it fire ringed and my friend Wayne at county automotive in San jacinto CA bored the block 40over cause I had scratches in cylinders 5&6 OVER yea come on 😂🤣
@@FirepunkDiesel I'm always watching your guy's video A all ya all know your shit I wish I lived in west Virginia where my brother and sister in-law live cause I would of took you my block to get the match Chin work done a that's Mexican word of the day I'm Mexican 🌮🌯
How much did this job cost the client?
We also did , new u-joint in rear driveshaft, rear main seal, EFIlive tuning with 5 position switch and trans install and including sales tax it was $8574 out the door.
BETTER THAN I EXPECTED. definitely gonna consider bringing my 07 5.9 in.
@@FirepunkDiesel Not a bad price. The efi live set up alone is about a grand. Which trans was it?
Not sure why I did not see this comment 3 months ago.
Back to the pile everyone 🤣🤣
Whats up with that rpm gauge
It's a common problem in 06-09 rams!
Someone needs to school me a bit. I never let my rpms get over 3.2k and this dude cruising at 4k?
His tachometer is very broken! Not actually 4k
@@FirepunkDiesel I thought maybe homie had a cheat code 🤔