DIY Blown-In Insulation: 7 Tips We Learned While Insulating Our Attic

Поделиться
HTML-код
  • Опубликовано: 29 ноя 2024

Комментарии • 48

  • @michaelallen7230
    @michaelallen7230 10 месяцев назад +10

    I really like the idea of your walkway in the attic. Look really nice.

    • @HammerandaHeadband
      @HammerandaHeadband  10 месяцев назад +1

      Thanks! It's nice for those times when we need access up there (and especially for this particular project!).

    • @Andrewkafp
      @Andrewkafp 8 месяцев назад

      I had this in the house we bought.
      I paid a company to remove it.
      Can't see my wiring.
      Can't check for termites.
      Can crawl around in the roof due to getting it all over you.
      Can't see the top of walls for adding power outlets.

  • @mattedmonds7830
    @mattedmonds7830 10 месяцев назад +11

    This video was REALLY well thought out and produced, Thank you so much! I'm going to use all of your tips in the next few weeks as I insulate my attic. Again, well done! 5 stars.

    • @HammerandaHeadband
      @HammerandaHeadband  10 месяцев назад +1

      Thanks so much! It was a big project but so worth it, especially during this crazy winter weather we've been having lately!

  • @benfish527
    @benfish527 9 месяцев назад +4

    Great video!
    Can you please share more details on the walkway? I see hurricane ties to the uprights. How are the uprights on the joists? What direction are the joists?

    • @HammerandaHeadband
      @HammerandaHeadband  8 месяцев назад +4

      Thanks! Here’s what Eric said about building the walkway: “The joists run perpendicular to the walkway, so using the hurricane ties was just a clever way to mount the long 2x6’s that support the walkway.
      There are little 3-4” risers that I had to cut individually at varying heights to keep the platform level as for some reason the joists weren't all the same height. Then I used hurricane ties to connect those to the joists and mending plates to attach the 2x6’s on top of that with a cross beam every 8’ or so, so the joint between OSB would be on top of it. I used weatherproof OSB sheeting I think 1/2 or 3/8, which is designed to be on the outside of the house before sheathing so it shouldn't be susceptible to mold.
      I then built a dam out of the scraps of OSB and screwed that to the outside to hold the blown in insulation back. I think it was like 6 to 8” tall.
      I put regular insulation batts (pink rolls) under the walkway before the blown in, so the walkway surface would be all done ahead of time.”

  • @alexandermaciag377
    @alexandermaciag377 12 дней назад

    Thank you. I will be adding more from the R30 that the house already has. I am going to check my ceiling joists support to make sure it can handle the added weight - live load and dead load to avoid damages to the joists and drywall bowing from 24 o/c. Otherwise, your tips will be very useful with safety in mind.

  • @slappy2825
    @slappy2825 Месяц назад

    Clearing out the rafter baffles with the blower side of the shop vac was a great hack. Leaf blower would work too. Nice.

  • @imrikkibobbi
    @imrikkibobbi 4 месяца назад +1

    i'm forced to do this come fall as my insulation is now 20 years old from the new build when I bought it, I really like your direct approach to this video. I'm thinking a little outside the box and exploring the idea of using radiant barrier paint to up the R factor even more so by painting the attic side of the ceiling, see if that happens or not. I think the walkway build is def the way I'm leaning towards as my attic is an insane jungle gym. Thanks for all the hard work putting this together. OH and I live in Central Texas so the heat lasts 6 to 9 months 🥵

  • @randywatson77
    @randywatson77 26 дней назад

    Great tips. I would like to have seen more on how you prepped, especially since you said you spent two months doing so.

  • @scottcorris509
    @scottcorris509 Месяц назад

    You just made me add a few things to this already daunting task. My two sons are going to help me next weekend. Today, I'm buying the insulation (10 bales), overalls, masks, goggles, rafter vents, spray foam...and who knows what else! lol I love your bungee cord idea! Luckily for me, I have a bedroom right outside the attic doors, so there's that. I'll need to cover some furniture with a drop cloth, too. Any other ideas?

  • @tomunderwood4283
    @tomunderwood4283 Год назад +4

    Well done! Thanks for the tips!

  • @ALAHOME
    @ALAHOME Год назад +4

    Excellent instruction video!! Have you calculated what roughly % of the summer AC bill is dropped after this great work?

    • @HammerandaHeadband
      @HammerandaHeadband  Год назад +5

      Thanks! There are some variables (e.g. I think our solar panels have been more productive this summer). But overall our electric bill has been averaging 30% lower year-over-year for the past few months, so the insulation seems to be helping!

  • @prairie8356
    @prairie8356 Год назад +3

    That definitely looked like a messy job, but well worth it.

    • @HammerandaHeadband
      @HammerandaHeadband  Год назад +3

      Thanks, Prairie! Yeah, it is nice to have it all done and enjoy the results! The house feels so much warmer.

  • @mach1mach1-ug9up
    @mach1mach1-ug9up Год назад +4

    Very informative and good job

    • @HammerandaHeadband
      @HammerandaHeadband  Год назад +1

      Thanks! It was a big job but worth the improved energy efficiency.

  • @NikkiVelazquez
    @NikkiVelazquez 2 месяца назад

    This is extremely helpful! Thank you!

  • @paulntraci99
    @paulntraci99 5 дней назад

    You mention you've noticed a difference in comfort. How's much did it save you on the electric bill?

  • @heyzeuss
    @heyzeuss 5 месяцев назад +1

    An actual helpful video. Thanks!

  • @JimmyBamis
    @JimmyBamis 22 дня назад

    Do you leave the planks in the attic and just cover them up with insulation?

  • @tcan603
    @tcan603 3 месяца назад

    Nice job, how did you get to your outside walls to air seal ?

  • @dispatchcustomerservice-gb4977
    @dispatchcustomerservice-gb4977 7 месяцев назад

    How would I do this with my furnace in attic

  • @kamilien1
    @kamilien1 6 месяцев назад

    thanks!

  • @AnotherScreenname
    @AnotherScreenname 4 месяца назад

    What I Learned: It's diy possible. Also, I'll pay a professional. - Great vid, thanks!

  • @mohammedrahman308
    @mohammedrahman308 13 дней назад

    Big no no on spray foam. Spray foam is fire hazard

  • @jameschuke4104
    @jameschuke4104 10 месяцев назад +1

    He done alot of unnecessary work I done thousands

    • @maxdominguez5543
      @maxdominguez5543 9 месяцев назад +1

      Like what?

    • @planetyeti8284
      @planetyeti8284 2 месяца назад

      You was probably in a big truck with a hopper that also blows air and all the prep work probably got done before you went in. They was doing it all by themselves. I do this for a living also and I've insulated both house and attic so I know. When i insulated the house we also did the prep work for the attic (foaming) holes and cracks. In the attic though nothing but baffles are needed.

  • @dlgray84
    @dlgray84 3 месяца назад +2

    Building a walkway was and is a huge waste of time lol

    • @MrLambntunafish
      @MrLambntunafish 3 месяца назад +4

      Tell me you've never worked in an attic without telling me you've never worked in an attic

    • @dlgray84
      @dlgray84 3 месяца назад

      @@MrLambntunafish I used to build houses, you dumb af, huge waste of time. Amateur hour over here building a walkway in an attic 🤣

    • @dlgray84
      @dlgray84 3 месяца назад

      @@MrLambntunafish Tell me you've never worked in construction without telling me you've never worked in construction 🤣 dumb af

    • @kniko517
      @kniko517 3 месяца назад

      @@MrLambntunafish absolutely a waste of time and overkill if you’re doing one or two attics a day. But for homeowners doing it personally I could see how this is helpful.

    • @billymacktexasdetective5827
      @billymacktexasdetective5827 Месяц назад

      ​@@MrLambntunafishExactly how much time do homeowners spend in their attic? That walkway is indeed a huge waste of time and money...

  • @LloydintheAmericas
    @LloydintheAmericas 7 месяцев назад

    Traditional insulation was invented around 1930. It only resists about 10% 99% pure aluminum multi layer stops 97% of whats trying to pass through it. I will drop your utility bill by 40% or and make the temperature even in the entire house “ The future in insulation Utube, “ask Dale Atlanta news reporter.

  • @sissymurphy9620
    @sissymurphy9620 9 месяцев назад +1

    I dids blown in insulation 6 feet of it and went up in the attic this year and it seems to have flown the coop . Put down R30 roll insualtion this time

    • @HammerandaHeadband
      @HammerandaHeadband  8 месяцев назад +1

      Dang! Did you install rafter baffles?

    • @planetyeti8284
      @planetyeti8284 2 месяца назад

      @@HammerandaHeadband They did something wrong because I have blown many houses and have went back to those houses years later to fix something that a home owner messed up and the R-value was always unchanged.

  • @txbrn512
    @txbrn512 Год назад +1

    great job!

  • @billymacktexasdetective5827
    @billymacktexasdetective5827 Месяц назад

    If you live where it gets cold, consider cellulose instead of fiberglass. Fiberglass loses 40% of its R value in temperatures below 20 degrees Fahrenheit and 50% below 0 degrees...
    Cellulose doesn't...

  • @lhenry1693
    @lhenry1693 2 месяца назад

    2 months preparing…..lol, damn that would be seriously depressing

    • @jdd6447
      @jdd6447 Месяц назад

      Cause he did it by himself all she did was play forman