I've tried so many different temp settings with different times and pressures... failed.... tried what works for you and success! Thank you so much. Wasted a whole box of tumblers, but I got it thanks to you! Now, I'm trying to get the seam to look good :(
Thanks! And yes, I wasn’t sure about the whole heating with a mug in it, but they definitely recommend it, so by golly, I’m doing it! Thanks for watching!
Good catch! I always tell people to do what I say and not what I do! I don’t add any paper on top of the sub paper, and I’ve never had an issue. But I’d hate for someone to go off a recommendation from me and then have issues. I think it probably has a little to do with the sub paper that’s being used. And to be better safe than sorry, it probably is best to use some sort of blowout paper. Thanks for watching!
I’m so glad! It’s on my design website, industrialfringedesigns.com (link also in the description). I think it’s under the 20oz new/popular designs. Thanks for watching!
Wow! I am really impressed that there is hardly any temperature fluctuation! I have a PYD Life 2-n-1 and the temp fluctuates WAY too much for me. May have to purchase this one.
I was kinda blown away as well! My Heat Press Nation press fluctuates quite a bit on the first press, and I was really surprised this one didn’t! Thanks for watching!
Just found your channel, liked and subscribed. Love the videos. Saw this and the other video with the automatic model Ennour. Can you tell me if either one of these machines can do the new 40 ounce tumblers ?
I am very happy to hear you had so much positive to say about this press. Mine arrived today. Didn't get to use it but will be doing so tomorrow. As usual, great video, very informative
I don’t use the oven often, but I will pull it out for the one-off and if I need to make a video where I can also use an oven. (The one-offs are usually small items that I can’t do in the press!) Thanks for watching!
Hi Roy, I just watched your video on the EENOUR tumbler press. I have this model and I'm having trouble with time and temp for the mug. Have you done mugs on your heat press? If so, what were your results? Thanks, Carol
Hi Roy, what time and temperature do you use on this press for mugs? I just ordered mine today. I'm so excited. I love your videos. They are so helpful.
Great review! I've been looking for a good tumbler press and this one is now at the top of my list. I'm using my circuit mug press to sub tumblers at the moment and it's a pain in the butt.
This is so informative , i just got the eenour tumbler press and am trying to get into sublimation (newbie) and am hitting a few roadblocks.. i got my frosted and clear glass 16oz tumblers from amazon and the black designs on the both are coming out as a brown ( i heard that means its burnt) ..im doing both tumblers at 375 F for 100 secs (the manufacture said to use between 370-380 deg for between 90 to 160secs) and using the A sub paper and heat tape. I also see that the on the clear glass can shows the tape marks on it and its grainy on the cup and design (from the paper i think?). Ive tried different temps at this point on various wasted tumblers so any help would be much appreciated! Thank you!
Thanks so much! For the black, in Photoshop, I create a solid black layer, then remove the outer edge by selecting my sizing template, then click on the template with the magic wand tool, then reselect the black layer and click clear. When I hide the template, I have a perfectly sized image. (I covered the process in a video about Photoshop Elements, but maybe I should make a video about just that!) My size is 9-1/4” x 8-1/8”, but tumblers can vary in height and circumference, so it’s a good idea to check the tumblers to make sure they’re always the right size! (I’ve had tumblers be different heights within the same case! It’s rare, but it happens.) Thanks for watching!
I’ve found that my time and temp is the same for different tumbler manufacturers as well as with both presses I’ve used, and with all colors! The only tumbler I press differently is the shimmery tumblers. I do those with less time and temp. Thanks for watching!
Just purchased this press from Amazon after seeing your video. QUESTION: Is it not necessary to use butcher paper around your tumbler. Every thing I’ve watch has use something on top of the tumbler print shrink wrap or butcher paper and you did not.
HELP sorry no current access to Facebook. Went to print out a couple shirt patterns and my printer is kicking out nothing but blank page. Topped off all ink ran test pages from printer, did that purge thing that fills up your waste tank four time. Tried to top off ink and none would take any ink.
We got this heat press but continue to get fading out/white spots on the top and bottom. With research it says air pockets. Do you have a video on how you wrap your tumblers?
YES! I have a couple of videos on how to get great edges (and seams)! Definitely check them out. Also, if you have access to an infrared thermometer, I’d check the edges to see if they’re getting an appropriate amount of heat. Sometimes heating elements don’t heat as well close to the edges.
@@industrialfringe953 I found the video do you have suggestions on how to fix the edges? We have a tumbler that is two solid colors would cutting out the color portion edges and trying to resublimate work ?
Thank you for your video! I just got mine and made a beautiful stainless steel tumbler in it. It make a knocking sound during the heating. Not beeping but knocking. I’m wondering if it’s defective or normal. Any thoughts? Thanks for your help!
Mine will make an occasional click, but not a knock. Well, maybe it could be considered a knock. But I’ve had no issues with mine, and I’ve already made a couple hundred tumblers with it!
I absolutely love it! It’s literally the only press I’ve used sine I got it! The only con I can see so far is, I discovered if I want to only put the end of the tumbler in to add some time to the top or bottom, I can’t because of the way the handle mechanism swings. But I’ve literally never done that, so it’s no issue for me. (I figured it out when I was thinking of pressing another 35oz and was thinking that I might have to press the ends. I ended up just using the oven, which is what I was originally gonna do anyway!) I’ve put the mug press on my Heat Press Nation press and just use it for coffee mugs. Time will tell if the heating element lasts, but so far I highly recommend it! Thanks for watching!
I don't know how to send a private message to you on Facebook. IF you were asking someone to design something that you could put on a tshirt what would be the requirements? Size, pixels, save as?
@@industrialfringe953 ok, sorry, I only did it this way because I was asking you personally but tomorrow I'll post it to the group. BTW, thanks for attempting to help with my printer but it's dead.
@@industrialfringe953 FYI in case you ever hear òf another printer that starts printing blank pages, factory reset solved my issue. Take care, thanks for all you did
Now I'm sad that I didn't buy it when it was on sale.The oven seems so nerve-wracking for me, because the temp keeps changing around a lot. I have two thermometers in it, and they never match up exactly, and they change around a lot. So far, all my tumblers in the oven are coming out fine. But I'd rather something more predictable. And I definitely hate my Goodcrafter press. I'll never use it again. So, I guess I'll have to stick to the oven until/unless the price comes down on this press.
All caps. Really? I was told there would be a 40% coupon and obviously that hasn’t happened yet. And I amended the description to not talk about a coupon, so I’m good for now…I think. But all caps? C’mon, man!
@@industrialfringe953 All I did was copy and paste your all caps, which I see you have now changed. That is the only reason for all caps, I just copied what you had typed!
I’m not so sure I agree with those methods. And I disagree with some of the comments. But we all have different ways to do it, and if her way works, then by golly do that, 100%
@@industrialfringe953 comment and a couple question for you. I did two tumblers and one turned out close but the seam is visible in a couple places. The other is the skull eBay I got from you and part of them seam is invisible but the other half and one side of the skull is green so, I'm going back to using your method. Now, did I purchase a tumbler graphic, tight side of a skull with flowers and the wording starts "I like murder shows"?
I’m not 100% sure what you’re asking. If you haven’t yet, join the Facebook group (link in the description) and we can more easily converse back and forth! (Don’t forget to answer the questions and agree to the group rules!) But based on a post earlier about this other RUclipsr, I’m thinking you may have already joined! If so, start a post there and we can figure out what’s going on!
@@industrialfringe953 already joined. Don't worry about the question it is a design I misplaced. BTW. Thank you so very much for all the knowledge you share. You have really help me.
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
I ordered one and it just arrived. Was able to get it on sale for $110! So excited. Your channel is so helpful! Thank you!
Here for the bloopers and sublimation 😊
I rap. You’re welcome!
I rap. You’re welcome!
Fed up with my oven adding this press due to your recommendations.... Thanks for the video oh yeah got fo 100 bucks...
goof results with the all black, always tough doing a big reverse with a black background
I've tried so many different temp settings with different times and pressures... failed.... tried what works for you and success! Thank you so much. Wasted a whole box of tumblers, but I got it thanks to you! Now, I'm trying to get the seam to look good :(
Congratulations! I’m so glad I could help! I have a couple of videos that talk about seams, so definitely check them out! And thanks for watching!
Wow I just ordered mine yesterday! I will be getting it tomorrow and I am soo excited!
I loved the video. And the thing about not heating without a mug in it is true; I burned a press up by heating w/out mug in it.
Thanks! And yes, I wasn’t sure about the whole heating with a mug in it, but they definitely recommend it, so by golly, I’m doing it! Thanks for watching!
How well will coffee cups, or glass cups?
I’m thinking about getting this. Imma beginning sublimation
Thanks for the video. I noticed that you don’t add butcher paper around your tumbler like I have been told to do by others.
Good catch! I always tell people to do what I say and not what I do! I don’t add any paper on top of the sub paper, and I’ve never had an issue. But I’d hate for someone to go off a recommendation from me and then have issues. I think it probably has a little to do with the sub paper that’s being used. And to be better safe than sorry, it probably is best to use some sort of blowout paper. Thanks for watching!
I love that Armor of God tumbler is fantastic. Where did you get that print please
I’m so glad! It’s on my design website, industrialfringedesigns.com (link also in the description). I think it’s under the 20oz new/popular designs. Thanks for watching!
Wow! I am really impressed that there is hardly any temperature fluctuation! I have a PYD Life 2-n-1 and the temp fluctuates WAY too much for me. May have to purchase this one.
I was kinda blown away as well! My Heat Press Nation press fluctuates quite a bit on the first press, and I was really surprised this one didn’t! Thanks for watching!
Just found your channel, liked and subscribed. Love the videos. Saw this and the other video with the automatic model Ennour. Can you tell me if either one of these machines can do the new 40 ounce tumblers ?
I am very happy to hear you had so much positive to say about this press. Mine arrived today. Didn't get to use it but will be doing so tomorrow. As usual, great video, very informative
Thank you! Yes, I’m really impressed so far. I’ve not gone back to my old press yet! Thanks for watching!
Great video - just wondering if you still use an oven. Otherwise, looking at this, thank you
I don’t use the oven often, but I will pull it out for the one-off and if I need to make a video where I can also use an oven. (The one-offs are usually small items that I can’t do in the press!) Thanks for watching!
Thanks! Just bought the press! I was able use the coupon too! Can't wait to get it and use it!
Fantastic! I’m loving me! It’s the only one I’m using now!
Mine just arrived yesterday!
Yay! Good luck! I love mine!
Hi Roy, I just watched your video on the EENOUR tumbler press. I have this model and I'm having trouble with time and temp for the mug. Have you done mugs on your heat press? If so, what were your results? Thanks, Carol
Hi Roy, what time and temperature do you use on this press for mugs? I just ordered mine today. I'm so excited. I love your videos. They are so helpful.
I have the same one and I love it so far
It’s the only one I’ve used since I got it!
Great review! I've been looking for a good tumbler press and this one is now at the top of my list. I'm using my circuit mug press to sub tumblers at the moment and it's a pain in the butt.
So far it’s been amazing! It’s the only one I’ve used since I did the unboxing!
This is so informative , i just got the eenour tumbler press and am trying to get into sublimation (newbie) and am hitting a few roadblocks.. i got my frosted and clear glass 16oz tumblers from amazon and the black designs on the both are coming out as a brown ( i heard that means its burnt) ..im doing both tumblers at 375 F for 100 secs (the manufacture said to use between 370-380 deg for between 90 to 160secs) and using the A sub paper and heat tape. I also see that the on the clear glass can shows the tape marks on it and its grainy on the cup and design (from the paper i think?). Ive tried different temps at this point on various wasted tumblers so any help would be much appreciated! Thank you!
Roy, thank you for such a great and informative review. I subscribed
Thank you for watching! And thank you so much for subscribing!!!
Great as always. Couple of questions…..Where do you get your black background? What is the size of your print. I also buy the same tumblers you have.
Thanks so much! For the black, in Photoshop, I create a solid black layer, then remove the outer edge by selecting my sizing template, then click on the template with the magic wand tool, then reselect the black layer and click clear. When I hide the template, I have a perfectly sized image. (I covered the process in a video about Photoshop Elements, but maybe I should make a video about just that!) My size is 9-1/4” x 8-1/8”, but tumblers can vary in height and circumference, so it’s a good idea to check the tumblers to make sure they’re always the right size! (I’ve had tumblers be different heights within the same case! It’s rare, but it happens.) Thanks for watching!
Do you find time and/or temp to have to be different for different tumbler brands?
I’ve found that my time and temp is the same for different tumbler manufacturers as well as with both presses I’ve used, and with all colors! The only tumbler I press differently is the shimmery tumblers. I do those with less time and temp. Thanks for watching!
Just purchased this press from Amazon after seeing your video. QUESTION: Is it not necessary to use butcher paper around your tumbler. Every thing I’ve watch has use something on top of the tumbler print shrink wrap or butcher paper and you did not.
HELP sorry no current access to Facebook. Went to print out a couple shirt patterns and my printer is kicking out nothing but blank page. Topped off all ink ran test pages from printer, did that purge thing that fills up your waste tank four time. Tried to top off ink and none would take any ink.
I think we have a dialogue going on Facebook now. Thanks, as it’s much easier to talk back and forth on Facebook!
We got this heat press but continue to get fading out/white spots on the top and bottom. With research it says air pockets. Do you have a video on how you wrap your tumblers?
YES! I have a couple of videos on how to get great edges (and seams)! Definitely check them out. Also, if you have access to an infrared thermometer, I’d check the edges to see if they’re getting an appropriate amount of heat. Sometimes heating elements don’t heat as well close to the edges.
@@industrialfringe953 I found the video do you have suggestions on how to fix the edges? We have a tumbler that is two solid colors would cutting out the color portion edges and trying to resublimate work ?
i went to Amazon today and this press is on sale for $159. Hmm...
i dont need a new press but this is very tempting...
I don’t want to sway you, but I do love mine. It’s now the only press I’m using!
Thank you for your video! I just got mine and made a beautiful stainless steel tumbler in it. It make a knocking sound during the heating. Not beeping but knocking. I’m wondering if it’s defective or normal. Any thoughts? Thanks for your help!
Mine will make an occasional click, but not a knock. Well, maybe it could be considered a knock. But I’ve had no issues with mine, and I’ve already made a couple hundred tumblers with it!
You’ve had it for a few weeks now, any update? What do you think about it now? Any cons?
I absolutely love it! It’s literally the only press I’ve used sine I got it! The only con I can see so far is, I discovered if I want to only put the end of the tumbler in to add some time to the top or bottom, I can’t because of the way the handle mechanism swings. But I’ve literally never done that, so it’s no issue for me. (I figured it out when I was thinking of pressing another 35oz and was thinking that I might have to press the ends. I ended up just using the oven, which is what I was originally gonna do anyway!) I’ve put the mug press on my Heat Press Nation press and just use it for coffee mugs. Time will tell if the heating element lasts, but so far I highly recommend it! Thanks for watching!
As always, I enjoyed your video.
I also have the Eenour. Did you get the press to snap when you sublimated the glass cans? The
16 oz size?
Hello…did you have trouble getting the press to snap with the 16 oz glass can?
I’m not really getting a snap on any of the substrates. It’s quite smooth. I’m also probably a little lighter on the glass pressure than I was before.
Roy, did you get it to lock when you did the 16 oz glass can? I’m afraid I’ll break the glass.
Yes, I probably didn’t use as much pressure as I have in the past for glass cans, but it was fine. Just be careful!
Thank you so much.
I don't know how to send a private message to you on Facebook. IF you were asking someone to design something that you could put on a tshirt what would be the requirements? Size, pixels, save as?
Please make a post asking in the group. That’s SO much easier than conversing through this type of thread! Thank you!
@@industrialfringe953 ok, sorry, I only did it this way because I was asking you personally but tomorrow I'll post it to the group. BTW, thanks for attempting to help with my printer but it's dead.
@@industrialfringe953 FYI in case you ever hear òf another printer that starts printing blank pages, factory reset solved my issue. Take care, thanks for all you did
Just bought one. It was $159.99 plus a $30 coupon, so $129.99 plus tax. It should be here Friday!
I use mine daily and love it!
Now I'm sad that I didn't buy it when it was on sale.The oven seems so nerve-wracking for me, because the temp keeps changing around a lot. I have two thermometers in it, and they never match up exactly, and they change around a lot. So far, all my tumblers in the oven are coming out fine. But I'd rather something more predictable. And I definitely hate my Goodcrafter press. I'll never use it again. So, I guess I'll have to stick to the oven until/unless the price comes down on this press.
There’s a $40 off coupon right now that drops the price to $159.99!
@@industrialfringe953 Where? I can't find it.
@@industrialfringe953 FOUND IT!
Hey Roy, where is THE COUPON THAT DROPS THE PRICE FROM $199.99 to $159.99?
Clicking on your link shows ONLY $199.99
All caps. Really? I was told there would be a 40% coupon and obviously that hasn’t happened yet. And I amended the description to not talk about a coupon, so I’m good for now…I think. But all caps? C’mon, man!
@@industrialfringe953 I just ordered and the coupon is there.🙂
@@industrialfringe953 All I did was copy and paste your all caps, which I see you have now changed. That is the only reason for all caps, I just copied what you had typed!
Gotcha! I thought you were yelling at me! And the last thing I need is you yelling at me!
I just checked it and it's on sale for $159.
You HAVE to check out how this woman does her tumblers. Shelli's tumblers
Please let me know what you think.
I’m not so sure I agree with those methods. And I disagree with some of the comments. But we all have different ways to do it, and if her way works, then by golly do that, 100%
@@industrialfringe953 comment and a couple question for you. I did two tumblers and one turned out close but the seam is visible in a couple places. The other is the skull eBay I got from you and part of them seam is invisible but the other half and one side of the skull is green so, I'm going back to using your method. Now, did I purchase a tumbler graphic, tight side of a skull with flowers and the wording starts "I like murder shows"?
I’m not 100% sure what you’re asking. If you haven’t yet, join the Facebook group (link in the description) and we can more easily converse back and forth! (Don’t forget to answer the questions and agree to the group rules!) But based on a post earlier about this other RUclipsr, I’m thinking you may have already joined! If so, start a post there and we can figure out what’s going on!
@@industrialfringe953 already joined. Don't worry about the question it is a design I misplaced. BTW. Thank you so very much for all the knowledge you share. You have really help me.