Tarot Iron Man 650 Build
HTML-код
- Опубликовано: 4 окт 2024
- Drone specifications :
Frame - Tarot Iron Man 650
Motors - Quanum MT Series 4108 370KV
ESC's - HP SimonK 30A for now and later ZTW spider series 30A
FC - Naza Lite V2 firmware + Chines OSD Module for DJI NAZA
Battery - Multistar 4S 6600mah 10C 27 min flight time, no fpv and gimbal, 21 min with gimbal and fpv
TX - Devo 10
Props - DJI 1555 Carbon Fiber Propeller
www.banggood.c...
www.banggood.c...
www.banggood.c...
Oh man ,she flies beautifully that should be mine and it looks really pleasing to the eye as well,Iwant one.
thanks mate, this one was my favorite :D
Ultimate combo for 650 ironman-4114 T-motor+40 amp Tiger ESC+ 15 inch folding props using 6S 5000 mah lipo. No wobble ever even w/ 3-4 lb. payload. Flying weight 7.5-8 lbs. 15 min flight time easy. And very fast. More powerful than a Inspire one or 2.
my one 26min on series 2x3S 5200mah 10C multistar
@@LukRC1 Incredible flight time, you think I could get more than 35m with 6S 12.6Ah batt?
It's heavy battery so I am not sure but you need to try to see i think 30 minutes
@@LukRC1 it's around 1.3kg, it's on the way I can't wait to fly this build
Love to see that
Still building mine.....would like to have you going through the first installation Nasa set up....
27 minutes on 6600mah battery is pretty impressive. And those motors look Super cool!
What voltage are we talkin at 27 min.
4S 6600mah up to 27min and on 6S 5200mah up to 34min flight time :D
4s 50c...?
HI, do you recall Naza pid settings for this build? Thx
Im going to be building this with MAD Components 5010-330kv, 18x4 CF and 10000mAh giving it a 31.5 min hover time with 3.1:1 thrust to weight ratio.
Nice !!! :D
Hey if you dont mind. Does this frame also support 5010 sized motors?.
Héllo..
Good frame man!The esc T-motor to,man!
Regards
thx
So can I use ironman 650 476 grams with 4 sunnysky 3508 380kv 6s like u did to fly whole weight of 3kg under 10 mins flight time to max height 6.5m? Do you suggest propeller 14 or 15? Thanks.
Great videos !! which of the 2 hexagon or this one is stronger to carry a sony a7iii ? Do you think they can carry a full frame camera like the sony a7iii or the sony a7siii? This one looks stronger but what you think about that?
*Drop the sound bed and provide a voice!*
How much does a build like this cost and whay the farthest range you can go? Pretty cool build
it really depends from parts, but around €500 + and range depends from your transmitter and receiver, I get 1,5 km from devo10
Found MT4108 is 700KV instead of 370KV, are the motors Quanum MT 4108 or Quanum MT 4114? Thinking to hang a flag under the copter, considering built one with 4114, need more thrust to withstand the drag created especially when wind is blowing.
Anyway, nice built. Thanks for sharing
Quanum 4108 370KV
Thx Mate
Nice 4in1 esc bullet connectors, did you make those? because I've never seen those before.
Without a pdb how do you plan on powering other components like fpv or gimbal?
Thanx for the video
Yes I have made them, just solderit 4 together, and 12v regulator for fpv and gimbal
Was it easy to build - I am 13 and hoping to build my first quad as I want to get into photography, I can fly very well aswell
You built the quad?
I'm thinking of building something like this so thanks for the vid+details. I notice you're not using a PDB? Is there a technical reason for that?
there was no place for pdp :)
HELLO, CAN YOU PLEASE EMAIL ME PICS OF HOW YOU USED THE NAZA PMU AS YOUR PDB? I AM STUCK THERE IS NO ROOM FOR A PDB PLEASE PLEASE HELP? THANK YOU IN ADVANCE FOR ANY OR ALL HELP!!!
what is your quadcopter weight in pounds?
hi Dear. question.. in minute 0.22 samples your esc and the length of the cables is not enough to reach the distribution pins, then you can see blue and black cables that to that task, what are those cables 16awg, 18awg? Some difference between both?
About time flying i think it good, because i build time flying just about 13-15min and battery going 3.7v, I don't what happen about battery or motor use alot ==
Hi Flame Heart if you have bad gains, then the battery run faster
Luk RC really, how can find a good gain. Can you make video about that, Thanks
Sorry but i don't have that drone anymore
Watch this one ruclips.net/video/fvRSGHub08s/видео.html
I think you have bought the whole set did you?
no i bought separately
At 7:50, the legs magically appear. Wouldn't it be best to put the battery underneath, rather than on top?
Yes When flying with gimbal the battery is underneath
Thanks Luk.
can u list build parts and lipo spec u used in the video and flight time prop size so on..ty
Drone specifications :
Frame - Tarot Iron Man 650
Motors - Quanum MT Series 4108 370KV
ESC's - HP SimonK 30A for now and later ZTW spider series 30A
FC - Naza Lite V2 firmware + Chines OSD Module for DJI NAZA
Battery - Multistar 4S 6600mah 10C 27 min flight time, no fpv and gimbal, 21 min with gimbal and fpv
TX - Devo 10
Props - DJI 1555 Carbon Fiber Propeller
Friend, we have finished putting the drone together with the same parts of your video, but after a while to test it does not rise, it seems that the radio control does not adjust the engines propulsion ... some advice to calibrate the radio control
try to calibrate radio in naza software
I'm using pixhawk when lifting it as it tilts to one side, when accelerating the engines you use both levers of the radius to stabilize it, or the stand alone
Sorry but i don't know too much about pixhawk, but it looks like bad compass calibration, I had the same problem with APM 2.8
Why did u choose Iron Man 650 and not 650 Sport?
To be honest with you the main reason it was the price, and second reason the look of that frame
What is the AUW? Did you use a PDB?
Tarot Iron Man 650, i build it my own one
what is the size of arm tube 16mm or 25mm? thinking to build a octocopter with dual motor mount, do you foresee any challenge with FY 650 Ironman
16mm
suddenly you could test the equipment with smaller batteries ... for example 13.5 hobbyking.com/en_us/multirotor-carbon-fiber-propeller-13x5-5-black-cw-ccw-2pcs.html?___store = en_us and see how the engines can behave
What are your gains in the naza assistant?
right now i have 30A ztw spider series and 6s battery
Basic Gain Pitch-125 Roll- 125 Yaw- 130 Vertical -130
Attitude Gain Pitch-115 Roll-115
Happy Flying :)
tienes el link de compra de los motores?
hobbyking.com/en_us/quanum-mt-series-4108-370kv-brushless-multirotor-motor-built-by-dys.html
naza flies same as my $30 apm 2.8 lol
DRONE GUY ..link to your vid please....
What has been your maximum flight time with gimbal and camara, so far I have only reached 4 minutes as a precaution, making flights with a speed of 5m / s at a height of 60 meters
21 min
And 26 to 29 min with 6s 5200mah battery
That is a good time, you have made automatic flights or only manual with the drone, I would like to make a tour of an area of 4 hectares
ATTI
I am using the 6600 mah 4s 10c which is the one you show in the video ..... but I wanted to be sure to see if I could send it to make a flight of about 10 minutes
was the auw 1824 or 1624?
1824
Luk RC thanks for the quick reply
cool
Gain value? please
Basic Gain Pitch-125 Roll- 125 Yaw- 130 Vertical -130
Attitude Gain Pitch-115 Roll-115
Happy Flying :)
Thanks ;) Great job
where did you buy this?
Buy what ??
The Tarot Frame - I ask because most if not all I see on eBay are copies - same on Chinese websites.
my tarot frame is for sell
i bought my in aliexpress
I guess somebody will get a bargain...but I ask where you purchased because there are many fakes/clones coming out of China either on ebay or the many online stores... is yours from eBay seller?
É muito bonito.Mas tem que ser profissional para montá-lo.
Can't people talk anymore?