Eu fiz essa adaptação e ficou bom, fiz com nylon,mais quem nao tem um torno, consegue fazer com cano pvc tambem, agora vou colocar uma mangueira fina, essa grossa é muito ruim
What about the over heating issue of the motor, it does reduce the heat after changing the spray gun as far as I know theres a air flow regulator in that spray gun you replace.
I totally open the air flow regulator. The pressure is Lil bit low. You will have to stop the blower and spray gun simultaneously, otherwise, the blower will heat up..Thanks for your comment..Pl. Subs...
This tiny air compressor doesn't make sufficient air pressure, which requires in this types of professional paint spray guns, so don't waste your valuable time to making such stupid things. Good luck to all those, who actually need fair information.
i also has the same paint sprayer and the compressor sprayer with air compressor, The problem with the zoom sprayer is atomization, mean according to professional spray painting the viscosity of paint and air has to be balance for perfect finish which zoom sprayer fails to air compressor sprayer
Is your spray gun high volume and low pressure, or is it low volume and low pressure? क्या आपकी स्प्रे बंदूक उच्च मात्रा और निम्न दबाव है, या क्या यह कम मात्रा और कम दबाव है?
Its low volume and low pressure. also full open the air flow regulator. The pressure is Little bit low. also You will have to stop the blower and spray gun simultaneously, otherwise, the blower will heat up. Thanks for your comment..Pl. Subs...
Ha Ha Ha 😅😅😅 ...Moi divertido Sr Diego Martín Sambade. a máquina de torno é a máis cara. Grazas polo teu comentario, subscríbete á miña canle. Grazas..
Gd day bro I made the paint zoom same as your work but my spray gun F75 won't work.the paint zoom is ok I use the PVC parts to connect to my spray gun...but there is no air came out from my spray gun...
Its low volume and low pressure. also full open the air flow regulator. The pressure is Little bit low. also You will have to stop the blower and spray gun simultaneously, otherwise, the blower will heat up. Thanks for your comment. .Pl. Subs...
The pressure is Lil bit low. You will have to stop the blower and spray gun simultaneously, otherwise, the blower will heat up. Thanks for your comment.
Ultimate dimag lagye ho ... Mujhe bike paint ke liye chahiye tha aisa Kuch.....par I think ye sirf water based paint ke sath hi chalega kya? Gun to oil based wali lag rahi hai...
I did not find the function of the spraygun gun satisfactory. I even tried removing the large compressor tank, ok for household purposes. But its pressure is low as well as the motor heats up quickly. Thanks for your comment. Pl Subscribe
Thanks for your comment. actually, I didn't make this attachment. I do not have that kind of skill. I took the paint zoom nozzle and spray gun and go to the lathe mechanic, told him about my idea. I only did the sanding, polishing, and testing......
@@woodenporium yes it was really an intelligent idea to merge better equipment to use it at its best. Is this all done in delhi or some other place sir ?
Fala amigo eu também estou nesta guerra kkkkk a pistola Normal ela tem uma borracha de vedação para virar ar direto precisa tirar este oring que a nela acredito que assim ficara normal
Revise su pistola rociadora, abra todo el flujo de aire de la pistola rociadora. Detenga la pistola y el soplador simultáneamente; de lo contrario El soplador se calienta. Gracias por tu comentario...
Si está tapado lo dejas sumergido en removedor de pintura y en minutos lo podrás destapar. Luego mantén limpia tu herramienta como mantienes limpio tu chorizo.
Great work...... Would be greatful if u can send the attachment... I have the same zoom sprayer.... But with the attachment we can fix a better sprayer Can u plz send me the attachment u made
Thanks for your comment. actually, I didn't make this attachment. I do not have that kind of skill. I took the paint zoom nozzle and spray gun and go to the lathe mechanic, told him about my idea. I only did the sanding, polishing, and testing......
Thanks for your comment. actually, I didn't make this attachment. I do not have that kind of skill. I took the paint zoom nozzle and spray gun and go to the lathe mechanic, told him about my idea. I only did the sanding, polishing, and testing......
totally open the air flow regulator. The pressure is Lil bit low. You will have to stop the blower and spray gun simultaneously, otherwise, the blower will heat up..Thanks for your comment..Pl. Subs...
I have this machine and the spray gun is of no use after 1 used... its good to have seen this video... bro keep it up..
Thanks ...................
Eu fiz essa adaptação e ficou bom, fiz com nylon,mais quem nao tem um torno, consegue fazer com cano pvc tambem, agora vou colocar uma mangueira fina, essa grossa é muito ruim
Eu também tive uma tentativa semelhante. Obrigado se você gostou do vídeo, por favor se inscreva.
@@possoteajudar7339 Não faça nada arriscado... Obrigado pelo comentário. permaneça conectado
You need two of those blower to make it more powerful. I have 2 of them lol. I will try to connect. Thanks for the idea! God bless
Good idea!
Também estou pensando ligar dois
how bout using reducer thread? i turn mine into vaccum cleaner + blower for sanding.
Achei que tinha melhorado , mas ficou a mesma coisa !
Mas foi um belo trabalho
Obrigado aot, pl. subs
What about the over heating issue of the motor, it does reduce the heat after changing the spray gun as far as I know theres a air flow regulator in that spray gun you replace.
I totally open the air flow regulator. The pressure is Lil bit low. You will have to stop the blower and spray gun simultaneously, otherwise, the blower will heat up..Thanks for your comment..Pl. Subs...
Bhai ka mehnat k liye
jabardast jugaad..!!
Thanks Amit Pl. Subscribe
Smart idea smart brain
Good job bhai
Bahut khoob, Kya bat ha....
thanks..
love india, nice sound and work.. alternative compressor for car paint will be cool.. namaste
Thanks alot..............
Aku yo nduwe mesin seng koyo ngono kui,pengen tak modif koyo kui...suwon ilmune
Matur suwun komentar .....
Urang ge sarua boga mesin cat kos kitu, hayang di modif kos kitu, kumaha carana nya..
@@firmansuci8020 Waragadna nyaéta 78.314.29 mata uang Indonésia. Hatur nuhun kana koméntar anjeun ....
Love you brother, genius 👍
Thanks Alot...........
This tiny air compressor doesn't make sufficient air pressure, which requires in this types of professional paint spray guns, so don't waste your valuable time to making such stupid things.
Good luck to all those, who actually need fair information.
Mi pregunta es cuando estas metiendo la pieza adaptada a la manguera entra a presion o lo que se ve entra suave y no saldra con la presion del aire
La presión en la pistola no es tan alta como en el tanque del compresor, por lo que no sale. Gracias por el comentario. Por favor, suscríbete
I am already done this type. But air pressure is very low. That same problem for you.
YES YOU ARE RIGHT, also, the machine heats up after 15 minutes too.... But my requirement easily fulfills in 10 minutes... sorry for that
i also has the same paint sprayer and the compressor sprayer with air compressor, The problem with the zoom sprayer is atomization, mean according to professional spray painting the viscosity of paint and air has to be balance for perfect finish which zoom sprayer fails to air compressor sprayer
also, the machine heats up after 15 minutes too
Because is uses blowers to pressure the air you'll notice the air coming from the main unit is warm instead of cool air
@@woodenporium for heating problems watch this... ruclips.net/video/WJ18QOjNCyM/видео.html
Is your spray gun high volume and low pressure, or is it low volume and low pressure?
क्या आपकी स्प्रे बंदूक उच्च मात्रा और निम्न दबाव है, या क्या यह कम मात्रा और कम दबाव है?
Its low volume and low pressure.
also full open the air flow regulator. The pressure is Little bit low.
also You will have to stop the blower and spray gun simultaneously, otherwise, the blower will heat up. Thanks for your comment..Pl. Subs...
Excellent sir
Many many thanks
Ya me armo un taller de tornería para modificar mi máquina.
Ha Ha Ha 😅😅😅 ...Moi divertido Sr Diego Martín Sambade. a máquina de torno é a máis cara. Grazas polo teu comentario, subscríbete á miña canle. Grazas..
Que pasa si se instala la manguera que usa la pistola de compresor ya que es más delgada comprime más aire
Es otra gran idea señor, gracias, suscríbase.
terbaik vedeonya....banyak informasi...semoga kedepan lagi konten ya...done sub..
Terima kasih banyak, saya akan melakukan yang terbaik .....
Gd day bro I made the paint zoom same as your work but my spray gun F75 won't work.the paint zoom is ok I use the PVC parts to connect to my spray gun...but there is no air came out from my spray gun...
Its low volume and low pressure.
also full open the air flow regulator. The pressure is Little bit low.
also You will have to stop the blower and spray gun simultaneously, otherwise, the blower will heat up. Thanks for your comment. .Pl. Subs...
nice work! can I use it as a metal painter? how is the quality?
The pressure is Lil bit low. You will have to stop the blower and spray gun simultaneously, otherwise, the blower will heat up. Thanks for your comment.
brilliant, thanks for sharing. very usefull
Good idea bro 😉
Thanks....
can you make one for me? how much does it cost to ship it to USA?
I want to order too! Ship it to Canada
Ultimate dimag lagye ho ... Mujhe bike paint ke liye chahiye tha aisa Kuch.....par I think ye sirf water based paint ke sath hi chalega kya? Gun to oil based wali lag rahi hai...
Thanks, Paint bhi oil based hai.
Write in a single language, because we don't understand what you say, instead of making yourself understood, you achieves to confuse.
Excelente....👏👏👏
Thanks Alot...........
Having a query on this, What are benefits if we made this change?
I did not find the function of the spraygun gun satisfactory. I even tried removing the large compressor tank, ok for household purposes. But its pressure is low as well as the motor heats up quickly. Thanks for your comment. Pl Subscribe
Mantap jiwa bang👍
Thank you brother...
Genius my friend
It doesnt work... Metak gun require more pressure.. i tried it but all waste
Yes Nitesh pressure is lil bit low, and blower hot very often...Thanks for your comment...
It does not work...Absolutely right.
very good...
Hii
A pistola essa da Pistola Pintura Gravidade Caneca 1000 Ml Rosca 1/4 da pra fazer.bom dia
What an idea sir ji
I have a machine like this that is useless. I was very helpful in watching this video than you
Can u make one for me how much I need to pay u. Send it to me Goa Please reply
Is the motor not heating easily?
Just after 5 Minits. Thanks
very nice
Thanks................
Thanks bro
Good brain bro
Great idea 💡 👍
Glad you think so! Pl. Subs
what on earthbis that, id rather paint it with a roller brush rather than using that converted machine of yours
Can you please share the link of the products and the spray gun ?🙏
Thanks for your comment. actually, I didn't make this attachment. I do not have that kind of skill. I took the paint zoom nozzle and spray gun and go to the lathe mechanic, told him about my idea. I only did the sanding, polishing, and testing......
@@woodenporium yes it was really an intelligent idea to merge better equipment to use it at its best.
Is this all done in delhi or some other place sir ?
anywhere in India, you just need a good lathe mechanic.
@@dharma.vibrates anywhere in India, you just need a good lathe mechanic.
Muy bueno
Very nice,,
Thanks a lot
No 3D printer, as is what everyone else would use.
A pistola tem que ar direto .pode usar uma mini pistola sendo ar direto
Hi man!! what a good idea!!
Thanks alot.....
Super
Ye Mai jugad bana ke dekh liya hun sab air machine se hi pass Ho jata hai spray gun se halka air aata hai usi se halka halka paint floo hota he
Fiz isso na minha e o ar não quer sair tá fraco
Thanks......Pl. Subs
Fala amigo eu também estou nesta guerra kkkkk a pistola Normal ela tem uma borracha de vedação para virar ar direto precisa tirar este oring que a nela acredito que assim ficara normal
Que pintura uso de agua o de aceite
De cualquier color, uso pintura al óleo en video. Muchas gracias
Wow
😎 👍good
Thanks ✌
What gun nozel size
please answer
This is useful for bike paint
Yes you can paint..
Car paint m bhi kaam kr skta h kya ye
Me gustaría saber cómo podemos destaparlo? El mío está tapado, no sale la pintura.
Revise su pistola rociadora, abra todo el flujo de aire de la pistola rociadora. Detenga la pistola y el soplador simultáneamente; de lo contrario
El soplador se calienta. Gracias por tu comentario...
Si está tapado lo dejas sumergido en removedor de pintura y en minutos lo podrás destapar. Luego mantén limpia tu herramienta como mantienes limpio tu chorizo.
No se si funcionaría pero yo la hubiera adaptado desde la salida del compresor con una manguera más fina y lisa para q llegará con más presión
Apki spray gun konsi h ?? Lvlp or hvlp?
Realy dont know...........
What cost is the piece
Pipe small size ka lagao performance bad jayega
Con un torno se puede hacer Miles de replicas.....
.
Thanks for your comment...Pl. Subs...
How much
Istimiwir
Long time
Retorastion, good luck brother
Thanks alot.....
Great work...... Would be greatful if u can send the attachment...
I have the same zoom sprayer.... But with the attachment we can fix a better sprayer
Can u plz send me the attachment u made
Thanks for your comment. actually, I didn't make this attachment. I do not have that kind of skill. I took the paint zoom nozzle and spray gun and go to the lathe mechanic, told him about my idea. I only did the sanding, polishing, and testing......
@@woodenporium great idea.... Thumbs up... Would love if u could get one for me too...
Super pro. try iam
Sure 👍
جربتوا ومنفعش لازم المسدس يتعدل
شكرا لتعليقك الرجاء الاشتراك
EXELENT IDEA.....BUT.....THE USER NEED MORE PRACTICE FOR PAINT....FATAL.....MY GOD...
Bro do you made that? I want to order bro.
THYANKS EarlJohn I had it made for myself. I have only one. You can contact any lathe mechanic, he can help you. thanks for the comment
ऐसा जुगाड़ मैंने भी किया था मोटर जल गई इस प्रेस सूट नहीं करता क्या इस पर
You will have to stop the blower and spray gun simultaneously, otherwise, the blower will heat up. Thanks for your comment.
My sprayer Pipe damage where can i brought same pipe. Pls given the details
Sorry No Idea..Thanks for your comment......
भाई फ्लेक्सिबल पाइप बोलना एलेक्क्ट्रिक का सामान जहा मिलता मैने लेके आया हु 25 रुपये में 5 फिट
9890571953 कॉल करलो नही समझ मे आया तो
@@bestintheworld4013 Thanks for your help...
Sorry i don't know Hindi
@@emmanuel5837 You will find fixable puppies at any electrician's shop. Rupees 5 Per Feet
Bhai mujhe ye canectar Chahiye kese milega
aapko banvana padega. Kharadi wale ka contact No discreption me diya hai. wo apke kharadi ko samjha dega.... Comment ke liye dhanyvad....
Can i buy that anda sent it to indonesia?
Datangin aja tukang bubut om tontonin ni video dan bawa perlengkaan spray gun sama selang mollar nya
dont work properly because low air presure
Yes
Supper
Thanks.............
Bro I need the same piece to connect the spray gun
Lathe Technicians
Name: Umesh Kumar
Mob. No.+91 8810641492
Communication Language: Hindi
@@woodenporium I don't know Hindi I am Tamil .can u tell me what is the price of the connecting bit price plzzzzz
@@mithran5495 its cost me Rs 300 with labour charges.....
good
Thanks....
Quero usar tinta automotiva preciso diluir ?
like it
How much price ?
Tell me plse
You will have to spend not more than Rs 400.
How can I get one in kenya
Is it low volume low pressure gun? Can i use HVLP gun instead?
You can try.....
En mi país mejor compro otro máquina porque el p....tornero cobra más de lo que cuesta la máquina😢😢😢😢😢😅😅😅😅
Thanks 👍🙏
Noted : if you have a lot equipment.... L.O.L
Vcs faz vende essa peça
please send me the diagram of the attchment you have made
Sure..
Thanks for your comment. actually, I didn't make this attachment. I do not have that kind of skill. I took the paint zoom nozzle and spray gun and go to the lathe mechanic, told him about my idea. I only did the sanding, polishing, and testing......
Es se bike paint kr sakte hai kya
aasani se ke sakte hai....
Ribet amat pak ... Tinggal pakai dof 1 inch trus pakai neple 1/4, 5mnt juga selesai
Time pass pressure
low pressure, not recommended
Yes, But good for domestic work....Thanks for your comment.
@@woodenporium ok , goodluck
I tried but there is no pressure, even water doesn't come out properly
What to do?
@@gautam142 Pl. check your gun, open full air flow. Thanks..
mene try kiya tha lekin bohoot kam pressher aata hai
totally open the air flow regulator. The pressure is Lil bit low. You will have to stop the blower and spray gun simultaneously, otherwise, the blower will heat up..Thanks for your comment..Pl. Subs...
Bahi mujhe bhai aapni masin esi banwana h
Does it work as well as before?
Yes ali shahryar2, I do it for my domestic task...
Idia is good but wher you lern video recording if you make vlog pls take training& come back more better next video good by
Thanks...
First learn english, second do you have any DIY video? Have you try to record it??
This guy made video and it's very good.
Sir. Can I order that handmade from you
You can make it own your own very easily......Thanks your reply , Pl subs...
@@woodenporium sir.. I don't have tools to make help me please