Modifique mi pistola siguiendo tu tutorial y quedo perfecta ya no consume la pintura excesivamente y queda un acabado uniforme.gracias por compartir tu idea
@@luisdominguez6350 si funcionó y se gasta menos pintura y el acabado quedo súper bien, ya le usado 10 veces y todo perfecto eso si al usarla hay que limpiarla al 100% antes de guardarla
Hace unos meses compré está pistola para pintar mi moto y hasta el momento está todo ok después de unos cuantos usos, ahora me urge hacer este tipo de modificación para poder pintar objetos más pequeño, espero me resulte igual de bien sin dañar algo de la pistola, en pero, si alguien sabe como conseguir los repuestos como boquilla, empaques, y ducto (paso de pintura) comenten por favor
Bro without modification I will do better finish more than you paint. This machine is good . I use this to paint my bike petrol tank . it will give best results. Keep note I never do any modification for that. This machine works well for trained painters. They know how to use it and getting good results.
Nueva seguidora ❤❤❤ *Para qué le hizo esa adaptación a la pistola* ??? Quedo atenta a su respuesta... Gracias por compartir y Saludos desde Costa Rica, Pura Vida ❤️❤️❤️
Tapos ko na yung gate at tricicle ko gamit itong modification na to, kung malalagyan lang picture tong youtube ipagmamalaki ko tlga kasi as first timer ang ganda na ng tira ko, ang di ko na lang nagagawa yung top coat sa tricicle dahil pinatuyo ko pa magdamag, sana walang maging problema bukas, matsala sa ideang to master..
Super recomended tong modification na to, tenisting ko ang hindi modified nozzle at modified anlayo ng deperensya, but insted na yung blue na dulo ng bulpen ang ginamit ko sa suction gumamit ako ng dulo ng bulpen na stainless na galing sa sign pen, grininder ko hanggang sa mag kasya para hindi na palit ng palit tuwing naglilinis kasi gamit ang tinner madali syang nalulusaw, pero yung sa nozzle hindi sya nalulusaw, from 2.5 mm nozzle to 1.2mm nozzle ang ganda ng buga nya pinong pino.
Highly creative. Few questions 1. Can we use this to paint bike/car parts ? Epoxy colours 2. Can this gun be repaired if it doesn't work due to some issue
oo paps sundin mo yung viscosity na inadvise sa manual, pero kung yung buga parin ay dotted or tuldok tuldok or ma splatter labnawan mo pa, di na ako nagamit ng viscosity cup kasi alam ko na at kabisado ko na yung labnaw na gusto ng machine.
What is the advantage of doing this? Which spray gun i should buy 550w with seperate blower or 400w you used? Is this spray gun is durable for long use ?
Boss pede din yan iapply sa latex paint? Kakabili ko lng kasi nyan ganyan mismo 450w kaso nde ko makuha ung tamang timpla ng paint nde pino buga splat sya
di ko pa nasubukan sa latex paps eh, pero eto ang napansin ko sa spraygun natin, kapag malapot yung pintura mas madaming splatter at pangit ang kakalabasan, pero pag malabnaw yung pintura maganda yung buga at pino, di na din ako gumagamit nang viscosity cup, kinumpara ko yung timpla ko na walang viscosity cup at yung merong viscosity cup mas malabnaw yung timpla na walang viscosity cup at dahil malabnaw maganda ang buga
with continues use maybe 2-3mins it will get hot and you will feel it on your point finger, you should wear gloves, but if you are using it not continuously it will not get hot.
pwede naman paps, kailangan lang tama yung timpla mo ng pintura, kung hindi pangit ng out come nya, kung bibili ka wag agad isabak sa mga projects, gamayin or mag praktis ka muna, nung una nahirapan din ako pero nung nagamay ko na pati yung saktong lapot ng pintura,
The answer is if we modified the nozzle of the front part paint does not release more with that finishing gets much better than before it looks like professional painting otherwise it looks unprofessional
Usually these spray guns come with 2 mm nozzles and for painting job on metals and automotives 1- 1.5 mm nozzles are recommend for smooth finishing. So he is trying to acquire the specific setting for the spray gun.
My ingco 450w gun sputters a lot since it was new and also gives orange peel in finish. I want to paint a car bumper using this gun. Any luck by doing this modification?
Low pressure cause this and i guess this gun isnt good for automotive paint ,its impossible to get that finish even spray can gives better finish that this
walang nabibili eh, tagal ko na naghahanap ng mas maliit kaso wala makita, kaya gumawa nalang ako ng paraan, palagay ko kayang gumawa nyan yung may machine shop ipagaya mo yung nozzle at needle nya. pero mas maliit na diamiter
@@lancecruz22 thinner paps, kung water base paint tubig lang, after mo magpintura lagyan mo ng thinner yung container at ispray mo hanggang maubos yung thinner, after nun kalasin mo na para malinis talaga lahat ng tuluyan.
Boss. Paano po ung akin na Ingco Spray gun ayaw mag vaccum mg Paint? Ok lng ba Guilder Epoxy Primer- Red Oxide, Guilder Catalyst at lacquer Thinner? Pa advice po boss..
yang brand din gamit ko paps, madalas ako gumagamit ng epoxy primer, ang ratio ko lagi ay 3:1:1 3 part paint + 1 part catalyst pag nahalo mo na yung paint at catalyst kung gaano yun kadami ganun din dapat ang thinner mo.
linisin mo muna yung spray gun baka barado kaya ayaw bumuga. check mo din yung mga rubber gasket at yung parang poam, pagnawala or nagkamali ng kabit di mavaccum yung pintura
@@milliardalaras3351 paps ang catalyst ay hindi pintura, ito po ay hardener or pampatigas ng pintura. kung water base paint lang naman, tubig lang ang pwede ihalo
@@TheHarhold sir ok pa ba spray gun mo..tsaka paanu po ratio na 3:1:1 3 part ng epoxy tpus 1 part ng catalist tsaka 1 part din ng thinner or kung gaanu karami ung mix ng 2 component
When modifying the nozzle, necessary ba na liitan din yung diameter ng feed tube ng paint canister/tank? Can you just replace the size of the nozzle without modifying the feed tube or am I missing something?
yes paps mas pino at di agad agad mag orange peal kasi kontrolado mo na yung dami ng pintura na ibubuga nya... less na din yung tapon or yung over spray.
lods nka tatlong brand n aq ng ganito ang last n ginamit q itong inco ng 450w.. lhat cla umiinit 😂 kelangan tlga magpahinga unless mapaso kna o bka matunaw ung body case
Thanks for the instructions bro.
Malaking tipid sa pintura ang tinuro mo.....
Ginawa ko to sir! Naging pino yung spray gun ko nakakatuwa 😆😆😆 salamat sayo brother 👊👊👊
Wes mantap 👍 Pinteran ehh jadi lebih fokus sebaran catnya 👍.
Super👍👍👍 good idea
Modifique mi pistola siguiendo tu tutorial y quedo perfecta ya no consume la pintura excesivamente y queda un acabado uniforme.gracias por compartir tu idea
De verdad funcionó?, que tal ha cambiado?
gracias
Deberás se ve UE si funciona al reducir los conductos y boquilla... Solo que abría k ver k tanto dura.. Pero una pluma por ahorrar pintura ufff
@@luisdominguez6350 si funcionó y se gasta menos pintura y el acabado quedo súper bien, ya le usado 10 veces y todo perfecto eso si al usarla hay que limpiarla al 100% antes de guardarla
Hace unos meses compré está pistola para pintar mi moto y hasta el momento está todo ok después de unos cuantos usos, ahora me urge hacer este tipo de modificación para poder pintar objetos más pequeño, espero me resulte igual de bien sin dañar algo de la pistola, en pero, si alguien sabe como conseguir los repuestos como boquilla, empaques, y ducto (paso de pintura) comenten por favor
Great mod. That seems to be working better than the original
di pa kaya bumili compressor ngayon.. buti nakita ko mod mo sir.. salamuch
Bro without modification I will do better finish more than you paint.
This machine is good . I use this to paint my bike petrol tank . it will give best results. Keep note I never do any modification for that.
This machine works well for trained painters. They know how to use it and getting good results.
Good work thanks! 👋🤩
Galing talaga ng pinoy noh.. may pantapat na sa indiano hahah 😂😂😂 sana gumana sa darating na pagpipintura ko 😂😂
good
Ito lang ang nakita kong Mod na effective bro. Ganda ng buga! Gayahin ko hehe 👌
salamat paps.
Excelente video.
Crees que con ese método llegue a tirar pintura 1.4 mm ?
sana sir pinakita mo ano pinagkaiba ng buga before and after pero susubukan ko na din 😁 thank you
exelente tutorial, tengo una pistola igual a esa... gracias por compartir
gracias
@@TheHarhold seria bueno subir un tutorial de limpieza y mantenimiento de esta pistola..
Nueva seguidora ❤❤❤ *Para qué le hizo esa adaptación a la pistola* ??? Quedo atenta a su respuesta... Gracias por compartir y Saludos desde Costa Rica, Pura Vida ❤️❤️❤️
thanks.. really works
Pang 800th Likes! Masubukan nga 😁
thank you!
Bagus yg cordless bro
Tapos ko na yung gate at tricicle ko gamit itong modification na to, kung malalagyan lang picture tong youtube ipagmamalaki ko tlga kasi as first timer ang ganda na ng tira ko, ang di ko na lang nagagawa yung top coat sa tricicle dahil pinatuyo ko pa magdamag, sana walang maging problema bukas, matsala sa ideang to master..
Super recomended tong modification na to, tenisting ko ang hindi modified nozzle at modified anlayo ng deperensya, but insted na yung blue na dulo ng bulpen ang ginamit ko sa suction gumamit ako ng dulo ng bulpen na stainless na galing sa sign pen, grininder ko hanggang sa mag kasya para hindi na palit ng palit tuwing naglilinis kasi gamit ang tinner madali syang nalulusaw, pero yung sa nozzle hindi sya nalulusaw, from 2.5 mm nozzle to 1.2mm nozzle ang ganda ng buga nya pinong pino.
naka try naba kayo sir sa mga kaha ng mutor?
@@brixlordsidugen9157
After 3 years , do you recommend it ? Is there any problem ?
Is this mod long lasting bro? How long until you need to re-new the mod again?
Thanks
Tipid sa pintura. Paps gumagana pa ba ang horizontal/virtical sa ganyan?
Can we yousd wood polish pu melamine
Lods may tutorial ka po ba nh tamang mixture ng paint pang bakal nitong Ingco spray gun salamat po.
Baka my nabbling 1.8 or 1.4 nozzle? Bka kasi matunaw ung ballpen pag acrylic paint ginamit
Sir nagamit mo na po ba sa urethane paint yang modded version na? kamusta naman po?
Does it heat up fast???
👍👍👍
Highly creative. Few questions
1. Can we use this to paint bike/car parts ? Epoxy colours
2. Can this gun be repaired if it doesn't work due to some issue
1. yes, you can use epoxy paint best ratio for me is 3:1:1.
2. yes, you can dismantle it just like an ordinary spraygun(compressor type).
Sir, hndi ba yan natangal yan sinalpak mo pag lilinisan muna yan noozle tip?
Hind po ba ninyo binawasan ung tanso na para sa trigger?
hindi po ba nasisira yung nozzle nya mismo na pinasukan ng ballpen? slamat po
info bang di mana nyarik platuk atau tuas spray gan elektrik bang
sir pwba sa varnish to🙂
thanks
he modified the nozzle so that the holl become small so that the out come of the paint is smooth
Que tipo de pintura se puede utilizar
Nasa loob po ba ung ballpen ng nozzle or sa labas lng
sa inyo ba boss may lumalabas na hangin sa on and off switch button area?
Boss pwde ba Yan SA marine epoxy paint Sana masagut
Pwede po ba cya sa pinturang pang bato?
malaking diperensya sa unmodified?
Boss pwede ba to pang paint ng bike
ano pong kl;aseng paint pede sa spray gun na yan?
Hello pede po malaman timpla ng epoxy primer.. thankyou po
Memang kalo kita beli ini
Baterai nya gak ada ya kak
Best way para linisan ang unit after painting? Paano bro?
pwede po ba sa latex ang spray gun
Pwd.poh b toh s epoxy enamel
boss how bout viscosity setting? same p din ba. example sa water based paint 20-40 sec p din?
oo paps sundin mo yung viscosity na inadvise sa manual, pero kung yung buga parin ay dotted or tuldok tuldok or ma splatter labnawan mo pa, di na ako nagamit ng viscosity cup kasi alam ko na at kabisado ko na yung labnaw na gusto ng machine.
Does this gun work with oil based paints? I wanna use it to spray melted cocoa butter
Bought and tested. It does
yes it works any paint acrylic pain oil paint water base paint it works
Pwd ba Ito sa total na 450w
Kua pde kaya gamitin sa kotse yan plz pki sagot
bos ubra ba sa polyurethane yan
Does this modification reduces orange peel in finish?
yes!
What is the advantage of doing this? Which spray gun i should buy 550w with seperate blower or 400w you used? Is this spray gun is durable for long use ?
Finer spray
Boss pwede po b gumamit ng urethane paint sa Ingco? Balak ko kc pinturahan ung fairings ng motor ko...TIA boss
pwede po
anong klaseng pintura pwede dito? pwede ba pang kotse??
bg pnya aq bru pkai 1 mggu udah gk kluar cet nya
Boss pede din yan iapply sa latex paint? Kakabili ko lng kasi nyan ganyan mismo 450w kaso nde ko makuha ung tamang timpla ng paint nde pino buga splat sya
di ko pa nasubukan sa latex paps eh, pero eto ang napansin ko sa spraygun natin, kapag malapot yung pintura mas madaming splatter at pangit ang kakalabasan, pero pag malabnaw yung pintura maganda yung buga at pino, di na din ako gumagamit nang viscosity cup, kinumpara ko yung timpla ko na walang viscosity cup at yung merong viscosity cup mas malabnaw yung timpla na walang viscosity cup at dahil malabnaw maganda ang buga
The nozzle size is really very big... This trick might help to get good finishing
parang ok sana ok talaga kasi i ordered na
can be used for solvent paints?
Se puede utilizar pintura de aceite
Estuve viendo que tiene una especie de embudo con el que medis la viscosidad y mientras esté dentro de lo establecido, podes usarlo.
Bersihin yg agak susah
iske parts nhi mil rahe hai
sir pinutulan mo pa ba yun tube dun sa tank bago isalpak yun nguso ng ballpen ?
tingin q ung head ng pen ang binawasan nya pra po kumasya.. wag nyo putulan ung tube ng ink intake nka fit un pag binawasan mo mag loloose fit na xa
This spray gun is the best you can do anything on it if you have the skills but if your dumb painter then this is not for you😅
Sir delivery kaha sy mily gi
May nabibili bang nozzle replacement na mas pino?
Need kp 1.4mm
wala paps.
does it get hot too early ? kindly guide me im willing going to buy one
with continues use maybe 2-3mins it will get hot and you will feel it on your point finger, you should wear gloves, but if you are using it not continuously it will not get hot.
How much?
Nsa. Nagamit lng yan kung pro k khit anu gmitin mo mapapaganda mo yan khit local p gmit mo
Boss pwede ba pintura sa trycle Yan ingco panghilamos salamat,,,
pwede naman paps, kailangan lang tama yung timpla mo ng pintura, kung hindi pangit ng out come nya, kung bibili ka wag agad isabak sa mga projects, gamayin or mag praktis ka muna, nung una nahirapan din ako pero nung nagamay ko na pati yung saktong lapot ng pintura,
bro may video ka kung paano ito linisan after gamitin?salamat.
abang abang lang paps niluluto na.hehe
Bos di ba natutunaw iyang sa bollpen na nilagay mo sa nosel kahit sa barnis okay praymer..
hindi paps
boss so far ok parin yung modification na ginawa nyo? ndi ba natunaw sa laquer thinner? salamat
hanggang ngayon wala paring problema.
kung matunaw man eh di gawa ulet mura lang naman ang ballpen.hehe
@@TheHarhold ayos idol salamat!
Pwd malaman timpla ng pintura pag flat latex…
Boss anung model ng ingco paint spray yan? Thanks.
450w electric spray gun lang paps
Anyone know if there's a bigger bottle for this sprayer?
You didn't tell what is the purpose of modified nozzle? What if you spray before modification which is the best to understand the difference
Exactly. Why would you modify when/if the actual product is working the same or maybe better.
Less paint will pass through the straw stronger air pressure smoother painting less splatter
Its now LVHP Low volume High Pressure😊
The answer is if we modified the nozzle of the front part paint does not release more with that finishing gets much better than before it looks like professional painting otherwise it looks unprofessional
Usually these spray guns come with 2 mm nozzles and for painting job on metals and automotives 1- 1.5 mm nozzles are recommend for smooth finishing. So he is trying to acquire the specific setting for the spray gun.
Mas mo nnya sampai brpaan hrga nya mas
Pwede ba automotive paint?
TIA
yes paps pweding pwede!
Boss anu purpose ng maliit na butas maganda ba bugo pino ba or tipid lng sya.
parehas po, gaganda ang buga at titipid konte sa pintura
My ingco 450w gun sputters a lot since it was new and also gives orange peel in finish. I want to paint a car bumper using this gun. Any luck by doing this modification?
Low pressure cause this and i guess this gun isnt good for automotive paint ,its impossible to get that finish even spray can gives better finish that this
I painted a whole car with a electric spray gun ,put a 1.5mm nozzle on it but I used enamel paint mixed with white spirit and Japan dry
sir pwede po ba sa latex eh spray yong gun
sorry di ko pa nasubukan sa latex paps
Sir san pde bumili ng nozzle na 1.8? Panget buga ng 2.5 nozzle e
walang nabibili eh, tagal ko na naghahanap ng mas maliit kaso wala makita, kaya gumawa nalang ako ng paraan,
palagay ko kayang gumawa nyan yung may machine shop ipagaya mo yung nozzle at needle nya. pero mas maliit na diamiter
paps hindi ba madaling matuyo ung sa nozzle kapag gamit mo ee quick dry paint?
habang ginagamit paps hindi naman pero pag napabayaan mo matutuyo talaga sya
@@TheHarhold anu po pinapanglinis mo?
@@lancecruz22 thinner paps, kung water base paint tubig lang, after mo magpintura lagyan mo ng thinner yung container at ispray mo hanggang maubos yung thinner, after nun kalasin mo na para malinis talaga lahat ng tuluyan.
@@TheHarhold Thanks paps. malaking tulong saken to.
@@TheHarhold pwede ba siya pang paint ng kaha ng motor paps ?
Boss pano yung linis kada gamit ng spray gun? Salamat
Sir hindi ba matutunaw yong ballpen sa loob??
hindi po, laquer paint pa gamit ko madalas at laquer thinner pinang lilinis ko
Boss. Paano po ung akin na Ingco Spray gun ayaw mag vaccum mg Paint? Ok lng ba Guilder Epoxy Primer- Red Oxide, Guilder Catalyst at lacquer Thinner? Pa advice po boss..
yang brand din gamit ko paps, madalas ako gumagamit ng epoxy primer, ang ratio ko lagi ay 3:1:1
3 part paint + 1 part catalyst pag nahalo mo na yung paint at catalyst kung gaano yun kadami ganun din dapat ang thinner mo.
linisin mo muna yung spray gun baka barado kaya ayaw bumuga.
check mo din yung mga rubber gasket at yung parang poam, pagnawala or nagkamali ng kabit di mavaccum yung pintura
@@TheHarhold boss catalyst paint ba applicable lang for paints that is diluted by thinner? Pang metal or kahoy? Di sya pwede sa water based paints?
@@milliardalaras3351 paps ang catalyst ay hindi pintura, ito po ay hardener or pampatigas ng pintura.
kung water base paint lang naman, tubig lang ang pwede ihalo
@@TheHarhold sir ok pa ba spray gun mo..tsaka paanu po ratio na 3:1:1
3 part ng epoxy tpus 1 part ng catalist tsaka 1 part din ng thinner or kung gaanu karami ung mix ng 2 component
Paano mag order po..
When modifying the nozzle, necessary ba na liitan din yung diameter ng feed tube ng paint canister/tank? Can you just replace the size of the nozzle without modifying the feed tube or am I missing something?
Up
Need din siguro para di ma choke ung nozzle?
Iske body se hawa kyon Nikal rahi hai
mas pino po ba ang buga?
yes paps mas pino at di agad agad mag orange peal kasi kontrolado mo na yung dami ng pintura na ibubuga nya...
less na din yung tapon or yung over spray.
mas es la pintura que bota al suelo
Lods normal lng ba yung mabilis syang mag-init?
lods nka tatlong brand n aq ng ganito ang last n ginamit q itong inco ng 450w.. lhat cla umiinit 😂 kelangan tlga magpahinga unless mapaso kna o bka matunaw ung body case
Ok nmn Sana pero Hindi pwede sa urethane paint.. lusaw yang ballpen na yan..
Link kya hai
pwede rin kaya mod na yan sa 350w variant ng ingco spray gun sir?
one more thing sir, di ba mas mabilis uminit dahil sa mod? tnx, nawala nga orange peel