pipe secrets, the easiest trick to cut metal pipes 45 degrees | cutting pipe 45 degree
HTML-код
- Опубликовано: 16 янв 2023
- pipe secrets, the easiest trick to cut metal pipes 45 degrees | cutting pipe 45 degree
This video is how to weld metal thin square tube using stick weld, this video is made for beginner welders, how to weld for beginners
Hopefully inspiring and hopefully useful
Don't forget to subscribe!!
#howtoweldforbeginners #welding #welder #beginnerswelder #weldingsquaretube #weldingmachine
Tag :
how to weld for beginners
how to weld for the first time
how to weld for dummies
how to weld for cheap
how to weld for beginners whistlindiesel
how to weld for beginners youtube
how to weld forged steel
how to weld for nasa
how to tig weld for beginners
how to weld arc for beginners
how to weld aluminum for beginners
how to tig weld aluminum for beginners
how to mig weld aluminum for beginners
how to weld aluminum tig settings
how to weld with a stick welder for beginners
how to forge weld in a gas forge
how to stick weld for beginners
how to arc weld for beginners
how to mig weld for beginners
how to flux weld for beginners
how to weld cast iron
how to weld cast aluminum
how to weld cast iron with stick
how to weld car body parts
how to weld catalytic converter
how to weld downhill stick
how to weld downhill mig
how to weld dog cage
how to weld dual shield
how to weld different metals
how to weld disc brake mounts
how to weld door hinge
how to weld exhaust for beginners
how to weld exhaust pipe with flux core
how to weld exhaust pipe with mig
how to weld exhaust pipe with stick welder
how to weld flux core vertical
how to weld flat bar
how to weld flux 125
how to weld fuel tank
how to weld good
how to weld gold at home
how to weld gasless mig
how to weld gate hinges
how to weld gas tank
how to weld good beads
how to weld gas pipe
how to weld hinges on metal gate
harbor freight welder
how to weld horseshoes together
how to weld hdpe plastic
how to weld holes shut
how to weld hardened steel
how to weld hinges
how to weld hole
how to weld metal for beginners in tamil
how to weld metal for beginners in hindi
how to weld jewelry at home
how to weld gold jewelry
how to weld with jumper cables
how to weld permanent jewelry
how to weld aluminum jon boat
how to weld a trailer jack
how to weld kaliskis
how to weld go kart frame
how to weld a kayak
how to weld a knife
how to wield a katana
how to weld a broken key
how to weld a dog kennel
how to weld a go kart
how to weld like a pro
how to weld lead
how to weld led strip
how to weld lithium batteries
how to weld lincoln electric
how to weld loops on fly line
how to weld leaf springs
how to weld laptop hinges
how to weld metal for beginners
how to weld metal for beginners mig
how to weld metal for beginners stick
how to weld metal for beginners malayalam
how to weld metal for beginners tig
how to weld aluminum
how to weld exhaust pipe
how to weld stainless steel
how to weld cast iron
how to weld plastic
how to weld copper
how to weld with a wire feed welder
how to weld mig
how to weld a muffler
how to weld aluminum with tig
how to weld a flower
how to weld an exhaust
how to weld aluminum with a torch
how to weld a rose
how to weld aluminum with spool gun
how to weld brass
how to weld better
how to weld body panels
how to weld brass together
how to weld bronze
how to weld better with stick
how to weld beads
how to weld brass pipe
b welding
how to weld cast aluminum
how to weld catalytic converter
how to weld cast
how to weld cast steel
welding thin stainless steel
welding thin aluminum
welding things
welding thin stainless steel with stick
welding thin stainless steel with mig
welding things to sell
welding things together
welding thin metals
welding thin stainless steel tig
welding thin wall stainless steel tubing
welding thin aluminum with mig
welding thin aluminum with dc tig
welding thin aluminum tube
welding thin aluminum with a spool gun
welding thin cast aluminum
welding thin cast iron
welding thin copper
welding rod for thin metal
arc welding for thin metal
welding thin pipe
welding thin plate
tig welding thin stainless pipe
welding thin wall tubing
how to weld cast iron with mig
how to weld cast iron with stick
c o to welding
c welding
how to weld c purlin
how to weld c channel together
how to weld downhill mig
how to weld downhill
how to weld different metals
how to weld ductile iron
how to weld door hinge
how to weld door panels
how to weld exhaust
how to weld exhaust tips
how to weld exhaust manifold
e weld plasma
how to weld flux core
how to weld for the first time
how to weld fence
how to weld for dummies
beginners welder kit
beginner welder machine
beginner welder projects
beginner welder setup
best beginner welder
beginner tig welder
beginner mig welder
beginner stick welder
beginner welder
beginner welder tips
beginner arc welder
best beginner welder mig
welder machine for beginners
cheap beginner welder
welder for beginners
best beginner tig welder for aluminum
good beginner welder
beginner mig welder kit
best beginner stick welder
best beginner tig welder 
Хобби
Wow, this guy is doing practical Geometry without using any formulas. This is CAD at its finest (cardboard assisted design)
Great videos, thanks for the information.
seriously 😂
Ummm... ok🤔
Really! I’d probably would have had it cut and tacked in the time it took you to make a paper doll!
Like anyone 100 years ago. 🤷🏿♀️
Thank you very much for the lesson 👍🏿🙏🏿👏🏿.
I’m not sure what I’m most impressed with: His practical geometry, or his angle grinder skills!
i too was trippin out how good he his but after enough practice i can do it as well! just gotta copy the technique
Awesome video man! Much appreciated
Thank you for posting! Came in handy doing a 31* notch using this principle.
This is outstanding!! I learned something!!!!
Just tried this out...works great. Thanks for the post.
Exelente tip para realizar este trabajo, gracias por compartir mucho éxito y un nuevo suscriptor en espera de próximo contenido 🖖😜🎱 saludos desde México 🇲🇽.
Когда нет опыта и времени много, можно геометрию вспомнить.
Когда человек опытный, можно по месту приложить, очертить рукой и произвести тоже самое, но затратив куда меньше времени.
Thanks, bravo, respect, from Tajikistan
오~좋은 아이디어 💡 😎
Когда ведешь монтаж, бумажками некогда заниматься, разные диаметры , разные углы врезки. Электрод который показан вначале , вот он и выручает
любую врезку можно разметить.
Покажи, если не из диванных.
Skilled for sure 👍
There not a thing wrong that he did on this! So many critics! Good job buddy!😊
So we're just gonna ignore his ignorance of safety by welding with NOT welding gloves, huh? Okay.
@@Rotorhead1651 No your right he should use PPE!
Very good👍👍
Отличная разметка и точное прилегание к основной детале! Сваривать такие трубы будет одно удовольствие!
Excellent craftsmanship! Admittingly I thought it might be clickbait but two thumbs up to you sir!
Bravo et merci
Very nice👍👍
Beautiful.
Thi is the new technic for me, thanks very much
😀👍👍👍👍muy bueno gracias.!!
I have no use for this but I thank you for sharing g your knowledge 🙏 to all
Appriaciate bro..
You got to be kidding? Awesome!!!!
Kicsit hosszadalmas eljárás, de pontos.Köszönöm
Thanks...
What blade are u using to cut the pipe with the grinder
Gracias.
Excelente video...👍👍👍👍
Great Video! ;0)
very good
Ý tưởng quá tuyệt vời 🥰
Great job! What do you call the Magnetic stuff?
Great vid
Super grazie
Өте керемет!!!
Nice
brilliant hack bro
Easy trick. Knives cut paper. Your trick is pretty neat too.
Extraordinary
dude is good
Muy bueno👍
A question. Is black iron pipe,like is used in Oil tanks, steel? I have a lot around I want to use up. I assume it is Iron Pipe thread,which is a thread size. It isnt really iron. Thanks.
ali limane/ et bien je peux vous dire que vous êtes un crac, très fort, j'aimerais apprendre votre tracé sur feuille, merci
Grat! 👍
Top 👏👏👏👏
Tuyền vơi bạn tôi ơi
Nicely done, great video, thx much !
Good
I was hoping after all that he would just set his chop saw to 45*
Doesn't work on tubing
Мерил-мерил, чертил-чертил, а в конце всё сделал на глазок
I wish this was taught in school.
Excelente .
All that time I could have made that cut and welded it dozens of times with my drill press.
Великолепно!
Жирный лайк и подписка!👍🤝
Mantap
Гений соединений
Булатный лайк мой 👍
I've been doing this kind of stuff for many years now, but this guy is truly fantastic
So ypu understand how complicated this method is
최고다
Good
좋아 good
I will stick with my trusty tubing notcher.
Videos like this are made because some people that dont know how to do it right have a camera lol
I recommend a chop saw with a dial indicator!!!! it takes all of about 10 seconds to turn it to the 45* marker and lock it back down!!!!
Or one could just buy a cheap hole saw tube notcher that will do any angle and they do a damn nice job.
easy way with no specialized tool
thanks for sharing
Todo muy bello pero no sebe claro la medida del tubo q corto ??? Si es un tubo de una y media como sería
Работать болгаркой без защитного кожуха не очень то умно! 😁
Puros profesional.
手際が美しい
Hola cómo doblo una tubería de metal a 90⁰ grados sin que se vuelva un óvalo. Saludos ✌️
I know this guy’s dad is proud of him. This man got skills to the ninth power.❤ I’m not stupid I definitely subscribed. I’m going to be quiet while class is in session. I won’t interrupt no more professor.
Hasta hacer todo eso ya me despiden de mi trabajo jjj
👍👍👍
In spite of all the other comments this is a slick trick if you’re not as equipped as all the other Einstein’s are.
I knew there was going to be a good reason for a piece of paper sooner or later.
Use some shish-ka-bob skewers and some rubber bands to make a workable jig.
Thank You,just saved myself $700.....I did all ,but the welding part.....
How much smith?
👌👌👌👌👍👍❤
สุดยอด
This was the fast wnd easy way only took a week to make this weld.
30度のやり方教えてもらえますか？
Köszönöm
На Авито шаблоны продают, присылают чертеж, любой диаметр и угол, все получается как по заводу!
Lha kalau pipa di atas 8 inc.apa ya harus buat mal2an??
I just want to know how he keeps all the metal shavings from sticking to the magnets!
#MAGIC
👍
Ima puno jednostavniji i brži način
Could you post of video of this faster and easier way please. Im trying to remember how I learnt how to notch pipe was very similar to this video but actually made a template out card and just wrapped it around pipe to make the cut pattern.
Maestro gracias por compartir su conocimiento con todos nosotros bendiciones 😊
Gracias hermano bendiciones ☺️
I LIKE THEM APPLES
지름, 4분절 이 두가지만으로 이해시키는 유튜버ㄷㄷ
Another reason why I like square tubing better.....
He learned while playing with paper dolls
Demasiado largo.
гений
А где защитный кожух у шлифмашины?!?!
Try a chop saw
Bud I wish your channel would stay out of my feed.
日本人なら、こんな手間はかけずに出来ます。