Hey just wondering if anyone can help, so when I was watching this video, I seen how you tap the yellow drl wire to the green for indicator, but I have a Toyota Corolla 2018, and for the indicator I only have a black and white wire for the indicator, which one should I tap into? Thanks for the help
Hey can you drop me a quick note I got these but I assure about hooking up hook yellow to yellow but on my plug I have a black n purple n yellow on my drl plug so yellow to yellow but the red n black is it black to black n the red goes to purple idk i have a Honda can you please help i really appreciate it
Agreeing with you. But there should be some solutions. It is a fact that most of the drivers are loosing their concentration in driving while using mobiles (bluetooth or the other way) Misusing I should say.
Redskins Pride WGIL I turned my Grandmas Buick LaSabre into a Buick laHOT-ROD....🔥 Click the link or find the video on my channel!!:) ruclips.net/video/4xksWwnJdDs/видео.html
So far my sequential amber lights are the only ones working and not the white DRL. To clarify, please let me know if steps are correct? 1. Both black wires from the LED strip connects to a ground metal of the car. 2. Connect green wire from turn signal to yellow wire of the LED strip 3. Connect the red wire from the LED strip to the red wire that is tapped to the 10amp fuse (connected to the empty fuse space of the fuse box)
Black wire to ground or negative on battery. Green, yellow, or anything else to signaling wire (your signal light is best bet). Red to empty fuse or ACC fuse.
Hi Rajeev, Why don't you connect the DRL wire to the DRL wire of the cars headlight? In that case the added DRL is simultaniously switcht with the DRL of the car. Or am I making a mistake here? Greatings from the Netherlands.
Nice job! Idk if you can help me but I have a 03 buick lesabre custom, I don't have heated or turn signal mirrors now, but I'm trying to add the turn signal glass with arrow pods on the back, same as factory. I bought the oem mirror glasses with the indicator arrows in them(only the limited models came with the signal mirror feature), two wires coming out of the mirror, I ran the wires up to the headlight assy and was going to splice into the side signal socket(only two wires there too). Should be easy but the arrows in the mirrors stay on constantly but blinked when the turn signal is activated and then light constantly when turn signal is off. I think this is not working correctly because of the drl system. It was darker inside of the garage when this occurred so thought to take for a ride in daylight and nothing in the mirrors worked, no light in the arrows at all! Can you help me to wire this correctly to work as it should? The signal in the mirrors should obviously only blink when the turn signal is turned on. I was gonna try splicing into the dedicated turn signal in the frt bumper but it had more then two wires coming out of that socket. Maybe THATS the one to splice into.... IDK. If the car didn't have drl, this would be easy. There is no information anywhere I can find on this, I've looked everywhere. There is one vid on RUclips on this but he doesn't show how to wire it. There must be a way to properly wire these in I'm sure, but I'm not getting it. I don't know if this matters but I'm trying this to the left side first, I haven't wired the right side yet. Will it only work until I wire both sides at the same time? I'm only trying this with one side is that creating an open circuit or something? Instead of tapping both wires from mirror into the socket, do I have to connect the black wire from mirrors to a separate ground elsewhere? I'm totally stumped! DESPERATE! THANKS!
Please can you email me at rajeevvelikkal@gmail.com or whatsapp me in the number given in my personal website www.rajeev.velikkal.com. Definitely we can work this out
Greetings sir! May I ask that do you connect both DRLs into 1 fuse tap (red) and 1 ground (black)? Or do you use 1 fuse tap and 1 ground for each DRL (meaning have to use 2 fuse tap and 2 ground for both DRL)? Amazing work BTW!
hi rajeev what color is position wire on a stock headlight? is it green, as shown in the video? my turn signal has that yellow wire but today I tried to connect it to the same color and failed.
This is a UK version Icon model. Maybe the wire color codings are different in other country versions. Suggest you to use a multi meter to find out the right wires
Hi Rajeev Super work! really appreciate it. I'm from Sri Lanka and have 2016 CHR, do you know any person whom i can get this done in Sri Lanka by any chance? Thank yoy
Sorry, I live in Singapore and have no clue, as this is something I did as a hobby and is not my profession. This is actually a generic product, which you can order online, and get installed from any local workshop there in Sri Lanka, or offer me a Sri Lankan Visa and flight tickets, will come and install it for you :), just kidding. As a reference you can show them this RUclips video.
Oh I"m sure most of us would like to have you here in Sri Lanka for share some of your experience ! Its a beautiful island and worth coming for Holiday if you get a chance !!! anyway thank you for the reply, I will order online and go to a local shop. By the way Rajeev do you know what type of what type of transmission ( is it CVT or normal automatic) and how to maintain it properly ? I have NGX50 Japanese domestic version imported from Japan. Thank you
Can u please answer my question.. i connected the black to body and yellow to green.. now when i press signal.... it goes on and off nust like signal bulb.. it doesnt have time to glow full
Please make sure that you bought the sequential led strip and not just an LED strip, sequential LED strip will have a black box to which the strip is connected by a ribbon cable.
I am trying to put these on a 2016 vw Passat. My drl and my turning signal is on the same circuit. When I use the turning signal it works. But how do I get it to go back to led?
I guess this needs separate line for DRL and turn signal. Wonder how come your Passat having it in same line, may be this is CAN controlled. Maybe you have to have a CAN decoder build specifically for this case
Last couple of months the bulb is in wrapped condition and so far no issues. Even I was thinking it will create some heat inside but looks like the aluminium foil is able to absorb it.
I know to mirror it to toyota touch 2 monitor that comes in Europe version. But not sure of Japanese version. What connection options do you have in this head unit, Apple car play/Android Auto?
Rajeev I don’t think it has either of those 😕. I’ve seen on RUclips that they put an additional AV input after removing the head unit or something! Really sorry I’m a real biginner to this field!
For additional AV you can look at my video that says how to enable AV on Touch 2 monitor. Since the wirings and connectors are all same should work on this head unit as well. Or try to figure out if there is an additional AV pin, or you can also use the reverse camera AV.
Here is the product link. Finally managed to find out an online store selling something similar. www.banggood.com/2PCS-45cm60cm-Switchback-LED-Strip-Daytime-Running-Lights-DRL-Sequential-Flow-Turn-Signal-p-1312349.html?rmmds=cart_middle_products
I don't understand wrapping the globe in foil? Like, just remove the globe if you don't want it there. That way if you need it later you can just reinstall it, and still have a lot of life left in it. AND, you don't run the risk of losing a ball of foil in your headlight housing! Good luck fishing that one out!
If you remove the indicator bulb then the out put load resistance of the flasher unit will become less and it will flash faster. The bulb is kept to keep the flashing speed normal
@@carDIYs ah, actually makes sense. I will find this information very useful when my light strip arrives. I'm installing on my 2001 mazda 121 metro. An old car, but when I'm done upgrading it's going to look brand new.
I guess we don’t need drl controller. This is just a connection we tap from the turn signal connections. DRL line of this can be connected directly to any ignition on line.
@@carDIYsHmm i have connect the power line to the position lights and led stirp turns on when i switch the headlights on! But when i connect the wellow wire to the turn signal lights it doesn't work...
Please try just connecting the yellow line only. Maybe the one you purchased cannot automatically switch between lines. But normally it should automatically switch off drl and jump to yellow when yellow line activated
Plus he added a fuse in an empty spot,that is the best way so no other fuse suffer from power draw.i would have spent an extra few box and get an circuit fuse tap instead of welding.
The other option is to use a sharp pin to which a wire is soldered to and pierce the wire and take the connection from the pin. Can remove the pin later if going for any warranty claim. Also what I have seen is that the small insulation cut that the T tap makes is not that visible. The other option will be to trace the wire and find out if this is coming from the fuse box and use a fuse tapper
@@carDIYs hi rajeev i bought a strip version they are 4mm thickness, but i have to cut them to 45cm because i was not able to close the front bumper, it seems they are too large, how manu millimeters.are yours ? 2mm? 3 or 4mm?
Google translator says “how much does it cost”. The answer is less than 100 dollar a pair. Depends on from where you get. Chinese sites like AliExpress sells it even cheaper
why show us 9 mins of you taking your bumper out which is completely irrelevant instead you should have showed us how you did the wiring . that would have got you a like from me but for now a big thumbs down for wasting my time .
Guess without taking out the bumper it is not possible to install the strip. And I guess the electric connections are all shown in the video, please reach to me if you need any help
My God , so much pointless work, without any benefit and reason !!! To disassemble so many elements from the car, just to mount some "useless lights", without any importance and use.... Sorry, but it seems very stupid to me!!! If you play with the electrical wires of a hybrid car , your car might catch fire if you don't know how to make the electrical connections professionally. Put in your mind that : this is not something to play with.
After watching this video a hundred times finally finished installing it! Made my chr look 💯 better, thanks for the video!!
I've got an 18', thinking of doing it as well.
Was it the same for you? a Green wire to splice into?
Very Nice video. I have seen hundreds of videos no one explain that much good for wiring connection. I have order already need to install.
Brilliant idea for wrapping the stock signal 👍👍
The tin foil will reflect all the heat back to the bulb and could start a fire.
just take out the bulb.. no need to use.. 🤣
@@sagewolf8528 YES, definitely ,that's a strupid ideea to foil that bulb !!!
You took something very simple and made it a Rube Goldberg. Lol
The 2020 XLE needs this
Great idea bro. You should use different music im falling asleep as I’m trying to watch video
🤣
Actually selecting music for the videos are the hardest part. Was thinking of removing all musics. Not sure if it will turn more awkward 😂
I now need to get to the foglights and adjust them, I've been looking for information for several months. Toyota C-HR 2.0 Hybrid new model
Hi, how did you split into two the fuse tap wire? Did you use a t tap connector?
Definitely doing this on mine 🔥
Hey just wondering if anyone can help, so when I was watching this video, I seen how you tap the yellow drl wire to the green for indicator, but I have a Toyota Corolla 2018, and for the indicator I only have a black and white wire for the indicator, which one should I tap into?
Thanks for the help
James Sinamoni i guess the white One. Black usually is ground. Check with a multimeter
banane192837465 okay sweet, thanks for the help
Really cool. Can you share the link to the product?
It comes with the led sequential indicators in the higher models
This is for the version that doesn’t come with sequential lights
Hey can you drop me a quick note I got these but I assure about hooking up hook yellow to yellow but on my plug I have a black n purple n yellow on my drl plug so yellow to yellow but the red n black is it black to black n the red goes to purple idk i have a Honda can you please help i really appreciate it
Agreeing with you. But there should be some solutions. It is a fact that most of the drivers are loosing their concentration in driving while using mobiles (bluetooth or the other way) Misusing I should say.
Good job!
Redskins Pride WGIL I turned my Grandmas Buick LaSabre into a Buick laHOT-ROD....🔥 Click the link or find the video on my channel!!:) ruclips.net/video/4xksWwnJdDs/видео.html
So far my sequential amber lights are the only ones working and not the white DRL. To clarify, please let me know if steps are correct?
1. Both black wires from the LED strip connects to a ground metal of the car.
2. Connect green wire from turn signal to yellow wire of the LED strip
3. Connect the red wire from the LED strip to the red wire that is tapped to the 10amp fuse (connected to the empty fuse space of the fuse box)
Black wire to ground or negative on battery.
Green, yellow, or anything else to signaling wire (your signal light is best bet).
Red to empty fuse or ACC fuse.
Hi Rajeev,
Why don't you connect the DRL wire to the DRL wire of the cars headlight? In that case the added DRL is simultaniously switcht with the DRL of the car. Or am I making a mistake here?
Greatings from the Netherlands.
It was giving some issue for me and so thought of connecting directly.
Nice alloy wheel...I hv 2018 GT turbo chr. Came with a diffrent set of alloy wheels.
Actually its not stock, but upgraded
Hi wondering if you can answer my question. Do you connect both yellow wire then tap to the green wire? Thanks
No.. connect yellow wires to the respective side green wire
Lo importante no es instalarlo ,,es donde se juntan los cables para la instalación,,,,, gracias
I am trying to follow this and do the wiring for my 2006 highlander but I dont have an unoccupied space in my fuse box. Help!
You don’t need an unoccupied space, but instead buy a splice fuse of higher power and replace one of the fuses with the splicing fuse
Ok I have a splicing fuse so I try it with the cig fuse which is 15A. I am trying to do mine exactly like yours!
Thank you so much I appreciate your response
Nice job! Idk if you can help me but I have a 03 buick lesabre custom, I don't have heated or turn signal mirrors now, but I'm trying to add the turn signal glass with arrow pods on the back, same as factory. I bought the oem mirror glasses with the indicator arrows in them(only the limited models came with the signal mirror feature), two wires coming out of the mirror, I ran the wires up to the headlight assy and was going to splice into the side signal socket(only two wires there too). Should be easy but the arrows in the mirrors stay on constantly but blinked when the turn signal is activated and then light constantly when turn signal is off. I think this is not working correctly because of the drl system. It was darker inside of the garage when this occurred so thought to take for a ride in daylight and nothing in the mirrors worked, no light in the arrows at all! Can you help me to wire this correctly to work as it should? The signal in the mirrors should obviously only blink when the turn signal is turned on. I was gonna try splicing into the dedicated turn signal in the frt bumper but it had more then two wires coming out of that socket. Maybe THATS the one to splice into.... IDK. If the car didn't have drl, this would be easy. There is no information anywhere I can find on this, I've looked everywhere. There is one vid on RUclips on this but he doesn't show how to wire it. There must be a way to properly wire these in I'm sure, but I'm not getting it. I don't know if this matters but I'm trying this to the left side first, I haven't wired the right side yet. Will it only work until I wire both sides at the same time? I'm only trying this with one side is that creating an open circuit or something? Instead of tapping both wires from mirror into the socket, do I have to connect the black wire from mirrors to a separate ground elsewhere? I'm totally stumped! DESPERATE! THANKS!
Please can you email me at rajeevvelikkal@gmail.com or whatsapp me in the number given in my personal website www.rajeev.velikkal.com. Definitely we can work this out
@@carDIYs Thanks you! I've sent an email from your site. I'll await your response. Thanks!
Hi. I'm interested in doing this for my fiat 500x mirror indicators. Do you think this method would work?
Hello sir I try to watch this video many time but still don’t understand about diagrams connecting please can you send me diagrams to connect?
Greetings sir! May I ask that do you connect both DRLs into 1 fuse tap (red) and 1 ground (black)? Or do you use 1 fuse tap and 1 ground for each DRL (meaning have to use 2 fuse tap and 2 ground for both DRL)? Amazing work BTW!
Just get one fuse tap and connect both left and right DRL positive(red wire) to this, black you can connect to ground(body of car)
Rajeev Velikkal thank you so much sir! You’ve earned a sub!
Yeah, it's LED. So you can wire em in series no problem, I'm going to hook mine up in with my hood light strip.
hi rajeev what color is position wire on a stock headlight? is it green, as shown in the video? my turn signal has that yellow wire but today I tried to connect it to the same color and failed.
This is a UK version Icon model. Maybe the wire color codings are different in other country versions. Suggest you to use a multi meter to find out the right wires
Do you have to tap a fuse at fuse panel (ACC) for Red wire if you have existing stock DRL? Can you just tap into the other + wire at headlights bulb?
Actually initially I tried this and it was giving me some problem, and so decided to tap power from fuse box to be on safer side.
Hi Rajeev Super work! really appreciate it. I'm from Sri Lanka and have 2016 CHR, do you know any person whom i can get this done in Sri Lanka by any chance? Thank yoy
Sorry, I live in Singapore and have no clue, as this is something I did as a hobby and is not my profession. This is actually a generic product, which you can order online, and get installed from any local workshop there in Sri Lanka, or offer me a Sri Lankan Visa and flight tickets, will come and install it for you :), just kidding. As a reference you can show them this RUclips video.
Oh I"m sure most of us would like to have you here in Sri Lanka for share some of your experience ! Its a beautiful island and worth coming for Holiday if you get a chance !!!
anyway thank you for the reply, I will order online and go to a local shop.
By the way Rajeev do you know what type of what type of transmission ( is it CVT or normal automatic) and how to maintain it properly ? I have NGX50 Japanese domestic version imported from Japan.
Thank you
Where did you connect the red wires to?? For the DRL? Is it constant?
Yes, both side red wire connected together and then connected to the fuse tap
Can u please answer my question.. i connected the black to body and yellow to green.. now when i press signal.... it goes on and off nust like signal bulb.. it doesnt have time to glow full
Please make sure that you bought the sequential led strip and not just an LED strip, sequential LED strip will have a black box to which the strip is connected by a ribbon cable.
@@carDIYs ok thank u so much.. :)
I am trying to put these on a 2016 vw Passat. My drl and my turning signal is on the same circuit. When I use the turning signal it works. But how do I get it to go back to led?
I guess this needs separate line for DRL and turn signal. Wonder how come your Passat having it in same line, may be this is CAN controlled. Maybe you have to have a CAN decoder build specifically for this case
Nevermind too much work
I have Honda Civic 2009. I don’t have drl light in it off course. Us there is anyway u can switch on and off to it?
Maybe we will have to connect it via a switch if you need to switch it on and off
Reducing the luminosity of the actual indicator bulbs was not the best move IMO
that's safe when you wrap indicator bulbs for the future? and you wrap just only the edge or full of bulbs? thanx anw..
Last couple of months the bulb is in wrapped condition and so far no issues. Even I was thinking it will create some heat inside but looks like the aluminium foil is able to absorb it.
Yes, you need to wrapp the entire glass part of the bulb, and better if you can extend it slightly to the holder area as well for more grip
How can I get this item to Nellore, AP, India.
You can order it from AliExpress or the link I provided in the comments
Hi, can you tell me a clue to get the exactly same strip please, name part number, company, thanks.
I am not able to trace this seller any more. May be you can try something from alibaba/aliexpress/rakuten. Go for the slimmest version available
Brother pruchase link de do agar hai to and kya price hai iska
Can you cut this led strips on the size?
Yes, there are cut mark marks along the strip ( 8-> ),
Hi Rajeev
Would you be knowning how to mirrror iPhone to TOYOTA CHR original Japanese audio-video player (NSZT Y66T)?
Thank you
I know to mirror it to toyota touch 2 monitor that comes in Europe version. But not sure of Japanese version. What connection options do you have in this head unit, Apple car play/Android Auto?
Rajeev
I don’t think it has either of those 😕. I’ve seen on RUclips that they put an additional AV input after removing the head unit or something!
Really sorry I’m a real biginner to this field!
For additional AV you can look at my video that says how to enable AV on Touch 2 monitor. Since the wirings and connectors are all same should work on this head unit as well. Or try to figure out if there is an additional AV pin, or you can also use the reverse camera AV.
Here is the product link. Finally managed to find out an online store selling something similar.
www.banggood.com/2PCS-45cm60cm-Switchback-LED-Strip-Daytime-Running-Lights-DRL-Sequential-Flow-Turn-Signal-p-1312349.html?rmmds=cart_middle_products
how can I take power to drl for the passenger side?
"Connect fuse tapper to BOTH red wires"
You need a really long red wire to connect to the passenger side.
Hey bro it comes with sequential indicators..
Mine has it
Actually not all models. Across the world CHR comes in different configurations, many entry models without LED headlights and sequential lights..
@@carDIYs yeah yours is a hybrid? Right mine is a 1.2l
Yes, UK Icon hybrid version. Singapore imports models from different parts of the world, and hence we have wide variety
@@carDIYs mine is a turkey built Japan imported one
@@carDIYs hey and is your one AWD I have a big problem about it
I don't understand wrapping the globe in foil? Like, just remove the globe if you don't want it there. That way if you need it later you can just reinstall it, and still have a lot of life left in it. AND, you don't run the risk of losing a ball of foil in your headlight housing! Good luck fishing that one out!
If you remove the indicator bulb then the out put load resistance of the flasher unit will become less and it will flash faster. The bulb is kept to keep the flashing speed normal
@@carDIYs ah, actually makes sense. I will find this information very useful when my light strip arrives. I'm installing on my 2001 mazda 121 metro. An old car, but when I'm done upgrading it's going to look brand new.
how to you make the DRL on when none of the lights are turned on? LIke a typical DRL
There is that car come with built in drl lights. In the headlight you see the 3 dot led well that the drl style for that version
use some drl relay..
Cant we make connection with accessories fuse on car hood and ground to battery?
I didn't get it why did you wrapped the indicator?
Because the orginal indicator light was too bright killing the new LED DRL signal lights
May i ask guys without DRL controller will this work?
I guess we don’t need drl controller. This is just a connection we tap from the turn signal connections. DRL line of this can be connected directly to any ignition on line.
@@carDIYsHmm i have connect the power line to the position lights and led stirp turns on when i switch the headlights on! But when i connect the wellow wire to the turn signal lights it doesn't work...
Please try just connecting the yellow line only. Maybe the one you purchased cannot automatically switch between lines. But normally it should automatically switch off drl and jump to yellow when yellow line activated
The car's warranty is now voided! jk xD
Yes it is, but luckily so far no issues and warranty will expire this May.. Fingers crossed
I dont think so,everything he did can be reversed
Plus he added a fuse in an empty spot,that is the best way so no other fuse suffer from power draw.i would have spent an extra few box and get an circuit fuse tap instead of welding.
Hi , is there any other way to fix the yellow wire to the green wire without having a cut on the green wire with the T Tap ? #warantee
The other option is to use a sharp pin to which a wire is soldered to and pierce the wire and take the connection from the pin. Can remove the pin later if going for any warranty claim. Also what I have seen is that the small insulation cut that the T tap makes is not that visible.
The other option will be to trace the wire and find out if this is coming from the fuse box and use a fuse tapper
@@carDIYs what if we use custom wire harness and attach with oem socket?
That should also be fine if you can source one.
@@carDIYs sir, one more question, what's the life span of this type of aftermarket led/drl?
This is on my car for more than year now and still working
Hi did you do urself. I need assistance with this. Thanks
If you are doing this for others too. Kindly contact me at +65 83884384. im from Singapore. Thanks
Please let me know how I can help you
Please contact Mr. Quck Wee on +65 90106136. He sells the same including fitting
Rajeev Velikkal you mean he does everything?
Yes, he might be having some stock and he do fitting as well for some additional charge
നല്ല മ്യൂസിക്
നന്ദി
Do you help others do installation?
Not as a profit making business, but can help with a clause of no claims of warranty or other accountability
Are you able to help me?
On a friendly note yes.. Please feel free to reach me. Like I said this is not my profession and not doing it to make money.
That’s great to hear, How can I reach you?
You can find my contact details from my personal website
Link to LED strip?
Kindly go through the comments. Have given link in one of my replies/comments, though not sure if it is still in selling.
And Red vire?
Connect it to the Fuse Tap as shown in video
👌
i need product link plzzz. where to but this item...
www.banggood.com/2PCS-45cm60cm-Switchback-LED-Strip-Daytime-Running-Lights-DRL-Sequential-Flow-Turn-Signal-p-1312349.html?rmmds=cart_middle_products
Thanks you very much ^_^
Please buy the 60 cm version if you need full length, like shown in my video
Thanks you again ^_^
@@carDIYs hi rajeev i bought a strip version they are 4mm thickness, but i have to cut them to 45cm because i was not able to close the front bumper, it seems they are too large, how manu millimeters.are yours ? 2mm? 3 or 4mm?
What is drl ?
R Grbic AG daytime running light
Dirty Rotten Lunatic.....now you know.
WHERE CAN i BUY THIS?
Please search the comments for few links..
I got the exact same product on wish for $10 😂
QUANTO COSTA ?
Google translator says “how much does it cost”.
The answer is less than 100 dollar a pair. Depends on from where you get. Chinese sites like AliExpress sells it even cheaper
Compri su ebay da 15 a 20 euro
I see you have taken a lower grade
Mine is the top spec
Malayali alle bro
അതെ
That's not a good ground.
Running a ground wire to plastic just don't do it.
DONT DO IT ITS ECU WILL NOT LIKE IT! YOU WANT TROUBLE " FIT IT.
какой же все-таки колхоз
FREAKIN NOT HELPFUL AT ALL..!
Eso es una basura china que no se ve nada
why show us 9 mins of you taking your bumper out which is completely irrelevant instead you should have showed us how you did the wiring . that would have got you a like from me but for now a big thumbs down for wasting my time .
Guess without taking out the bumper it is not possible to install the strip. And I guess the electric connections are all shown in the video, please reach to me if you need any help
this video is specific to Toyota Chr as you can read in the heading. So I think it's also important how you get the bumper off. 5 thumbs up
My God , so much pointless work, without any benefit and reason !!! To disassemble so many elements from the car, just to mount some "useless lights", without any importance and use.... Sorry, but it seems very stupid to me!!! If you play with the electrical wires of a hybrid car , your car might catch fire if you don't know how to make the electrical connections professionally. Put in your mind that : this is not something to play with.