Is it possible to add a pouch for screws? You’re right about nails-I use a nail gun-but I also run a lot of screws. Having the impact holder doesn’t make a lot of sense if there’s nowhere to keep corresponding fasteners.
So what happened to the metal hooks for the drills to attach to? Just bought one for my boyfriend. Looking at videos to properly set up and notice so many key selling points have been updated out of the belt. Not sure i like that. Is there a way to add those? Or is that a feature not being brought back? Also the magnetic pad on the right shoulder, whered that go?
Hi, The features you are referring to were features of our first generation belt. We now only have the Essential tool belt. Below are the key changes made for the latest model: Tool Belt: Removal of Rear Drill Clips: Not everyone was using these clips, so we took them off to lower the price a bit without losing any important functions. Removal of Rear Chalk Line Pouch: Now, you can buy this separately if you want it, letting you personalize your toolbelt the way you like. Modified Front Buckle: We changed this to a design that's just as good but helps us keep the cost down, making sure you still get great quality and comfort. Improved Tape Measure Pocket: We tweaked this pocket to let you reach your tape measure more easily and quickly. Additional Carpenter Pencil Slots: Now, you can carry more carpenter pencils with you, so you always have a spare handy. Suspenders: Enhanced Suspender Adjustment Clips: These new clips adjust more easily and stay closed securely. Shortened Adjustment Strap Length and Added Strap Organization Loop: This change helps keep everything tidy and prevents straps from getting tangled up while you work. Removal of Magnetic Holder and Earphone Pocket: We took these features out to concentrate on what's most important and useful, allowing us to offer the toolbelt at a better price without cutting corners on quality.
The magnetic holder has been made into an add-on accessory. You can find the Magnetic Drill Bit Holder here: perkinsbuilderbelt.com/products/perkins-builder-brothers-magnetic-drill-bit-holder-with-secure-tool-belt-clip-on-2-pack Additionally, the center strap or toolbelt itself can be used to attach drills. Erik hangs his drill on the back of the belt! We are hoping to launch drill clips as an add-on accessory next year. If you are unsatisfied with your toolbelt, please contact us at stud@perkinsbuilderbelt.com.
Amazing tool belt! Exactly what I needed with enough space and accessories to get get most jobs done. Completely comfortable and functional. One thing. I measured around my belly button and got 41" and got the medium just like it said on the tool belt website measuring guide. I have pulled all the way out on my suspenders and belt and it is still a bit loose. I'm going to need to size down to a small. What can I do now? Mail it back? Can it be switched out with the money I already payed? How do I go about ordering another one with the money I payed with? I can't find an email to message to someone to about this so I guess this is the place to do it? Have some jobs coming up and would love to use the belt!
Was gifted one for Christmas. However, mine doesn't have the magnetic bit holder, hearing protection pouch or clips for my driver. Did I get a defective belt that I need to return?
Hello, thank you for your purchase! The version in this video was our first model - the Premium Contractor Belt. After customer feedback we scaled back some of the features so we could provide a lower cost to the customer, this is our Essential Belt that you purchased. We do have additional accessories that can be added to the belt to make it more customizable.
They won't be shipping to Europe as far as I know, did you look at Akribis Leather tool belts? I've been wearing Occidental Leather rigs for the last fifteen years. I'm considering changing over to an Akribis Leather set up, 👍🔨🇮🇪
@@MrAidanfleming Too heavy? I have a ballistic nylon/leather belt plus two all leather rigs from Occidental Leather. The all leather is heavier but once broken in moulds to the body beautifully. The nylon is lighter but never really breaks in if you know what I mean, 🔨 🇮🇪
theres different sizes and they run very big. im 6ft 200 lb 36Wx32L, got the medium size and i got in sinched up a lot and I'd say I still have enough adjustment for a 280lb person my size
Our belt is available in 4 sizes. Please check out the sizing guide information on our website: perkinsbuilderbelt.com/products/essential-low-profile-toolbelt-set-1
@@shiftkings1028 Thanks for letting me know. That is so disappointing. I'll spend the $300 on something made in the USA like an Occidental Leather or R&J Leathercraft.
@@microbrandproducts I went through the process of buying the belt on your website and it will come out to over 500$. If it was 299$ I would have purchased it
I'm not a carpenter, but even I can see it was about time someone put a dedicated pouch for a modern cellphone and earbuds. Well done.
Just got one today, no longer had the metal tool clips or the ear pro holder on the suspenders. Leather patches not on the poches either.
Very well designed. I already have a diamond back , but I’d say this one has some cool extras.
Is it possible to add a pouch for screws? You’re right about nails-I use a nail gun-but I also run a lot of screws. Having the impact holder doesn’t make a lot of sense if there’s nowhere to keep corresponding fasteners.
Yes! We have pouches available as well as other accessory options!
perkinsbuilderbelt.com/collections/tools-accessories
Lotsa fun in your set up . Happy Sales
I love the videos. Keep up the GREAT WORK
i cant seem to get it delivered to UK
Are you guys able to make it so I can purchase an extra hammer holster to run on my left side for a pry bar holster???
Looking for a new belt I’ll wait for this for sure this one similar to my iron worker harness with lowes bought tool bags 🙏🏾
You can order here: perkinsbuilderbelt.com
So what happened to the metal hooks for the drills to attach to? Just bought one for my boyfriend. Looking at videos to properly set up and notice so many key selling points have been updated out of the belt. Not sure i like that. Is there a way to add those? Or is that a feature not being brought back? Also the magnetic pad on the right shoulder, whered that go?
Hi,
The features you are referring to were features of our first generation belt. We now only have the Essential tool belt. Below are the key changes made for the latest model:
Tool Belt:
Removal of Rear Drill Clips: Not everyone was using these clips, so we took them off to lower the price a bit without losing any important functions.
Removal of Rear Chalk Line Pouch: Now, you can buy this separately if you want it, letting you personalize your toolbelt the way you like.
Modified Front Buckle: We changed this to a design that's just as good but helps us keep the cost down, making sure you still get great quality and comfort.
Improved Tape Measure Pocket: We tweaked this pocket to let you reach your tape measure more easily and quickly.
Additional Carpenter Pencil Slots: Now, you can carry more carpenter pencils with you, so you always have a spare handy.
Suspenders:
Enhanced Suspender Adjustment Clips: These new clips adjust more easily and stay closed securely.
Shortened Adjustment Strap Length and Added Strap Organization Loop: This change helps keep everything tidy and prevents straps from getting tangled up while you work.
Removal of Magnetic Holder and Earphone Pocket: We took these features out to concentrate on what's most important and useful, allowing us to offer the toolbelt at a better price without cutting corners on quality.
The magnetic holder has been made into an add-on accessory. You can find the Magnetic Drill Bit Holder here: perkinsbuilderbelt.com/products/perkins-builder-brothers-magnetic-drill-bit-holder-with-secure-tool-belt-clip-on-2-pack
Additionally, the center strap or toolbelt itself can be used to attach drills. Erik hangs his drill on the back of the belt! We are hoping to launch drill clips as an add-on accessory next year. If you are unsatisfied with your toolbelt, please contact us at stud@perkinsbuilderbelt.com.
Disappointed the magnet and earphone did not come with nor was offered with my purchase
WHAT DO YOU DO IF YOU ARE WORKING WITH VATIOUS SIZE SCREWS?
Amazing tool belt!
Exactly what I needed with enough space and accessories to get get most jobs done. Completely comfortable and functional.
One thing. I measured around my belly button and got 41" and got the medium just like it said on the tool belt website measuring guide. I have pulled all the way out on my suspenders and belt and it is still a bit loose. I'm going to need to size down to a small.
What can I do now? Mail it back? Can it be switched out with the money I already payed? How do I go about ordering another one with the money I payed with?
I can't find an email to message to someone to about this so I guess this is the place to do it?
Have some jobs coming up and would love to use the belt!
Who mfgs it and where is it made??
Will they be in stock again anytime soon?
Was gifted one for Christmas. However, mine doesn't have the magnetic bit holder, hearing protection pouch or clips for my driver. Did I get a defective belt that I need to return?
Hello, thank you for your purchase! The version in this video was our first model - the Premium Contractor Belt. After customer feedback we scaled back some of the features so we could provide a lower cost to the customer, this is our Essential Belt that you purchased. We do have additional accessories that can be added to the belt to make it more customizable.
Where are they made?
Picked one up, sadly china
Love your work 👍
….would like to purchased one and how do I go&but it….Dennis from Hawaii….
You can purchase at perkinsbuilderbelt.com
Nice kit guys...
Do you ship overseas? To Malaysia?
Made in USA?
I think so. I know he designed it.
Will you post to the UK ? thanks
Check out perkinsbuilderbelt.com for shipping options
I want one, I’m in the uk though!! Hopefully there’s plenty available
They won't be shipping to Europe as far as I know, did you look at Akribis Leather tool belts? I've been wearing Occidental Leather rigs for the last fifteen years. I'm considering changing over to an Akribis Leather set up, 👍🔨🇮🇪
@@Toyotaamazon80series I currently use diamondback, don’t like leather tbh
@@MrAidanfleming Too heavy? I have a ballistic nylon/leather belt plus two all leather rigs from Occidental Leather. The all leather is heavier but once broken in moulds to the body beautifully. The nylon is lighter but never really breaks in if you know what I mean, 🔨 🇮🇪
You can order here: perkinsbuilderbelt.com
Mr. Perkins. Is this tool 🔧 belt good for wide bodies? Most of the geniune model pictures are of small people such as yourself.
theres different sizes and they run very big. im 6ft 200 lb 36Wx32L, got the medium size and i got in sinched up a lot and I'd say I still have enough adjustment for a 280lb person my size
@@shiftkings1028 Thank you very much.
Our belt is available in 4 sizes. Please check out the sizing guide information on our website: perkinsbuilderbelt.com/products/essential-low-profile-toolbelt-set-1
Congrats!
I'm ready with my credit card to order one,so hurry and tell me where I order
You can purchase here: perkinsbuilderbelt.com
Is it made in the USA?
picked one up, sadly made in china, it feels decent enough though, we'll see
@@shiftkings1028 Thanks for letting me know. That is so disappointing. I'll spend the $300 on something made in the USA like an Occidental Leather or R&J Leathercraft.
how much do they go for ?
The tool belt will be $299
What is the link if someone wants to buy?
Keep an eye on the Perkins Builder Brothers RUclips channel, they will be announcing when pre-orders open and where to order!
This can be ordered here perkinsbuilderbelt.com
ordered!
So it’s pretty much a diamond back
Some similarities to the diamondback artisan but a better price point especially considering the suspenders are included in the price of $300
You can order yours here: perkinsbuilderbelt.com 😎
Need more room for nails and clips and fastners what if you doing hardware no bueno
So you got the chopo from diamondback, then basically copied them, but a made in china version 🤔🤦🙄🤷♂️. Unless it’s 1000 Denier fabric, is it?
It says 1200D if you would have taken 8 seconds to look on their site.
Cheap Diamondback. I like the suspenders
Pretty much Diamond back tool belt
Tool belt seems great, however over 500$ all said and done is steep
Hi Will, our tool belt is $299 compared to the competitors $500+ tool belt
@@microbrandproducts I went through the process of buying the belt on your website and it will come out to over 500$. If it was 299$ I would have purchased it
@@WilllMI just got it for 340 with express 1 day shipping paid and done
@@Billybob-go8hn It will cost more for me because I’m in CAN
@@WilllM That blows, that is steep!
don't like non leather belts ,they come apart too easily.
Not modular enough for me. I’m going with atlas 46. Yep that overpriced rig.
Hope you don't fall into a lake.