Centurion Wood Coatings and a Fuji Semipro 2. Does it work?
HTML-код
- Опубликовано: 13 сен 2024
- Using my Fuji Semipro 2 I take my maiden voyage into Centurion Wood Coatings on some cabinet doors. Ever searching for that smooth durable finish, watch to see my thoughts!
Never mind you answered my question at the end 😊of the
I've not yet added the hardener to the primer. I have used it in the top coat. I'm getting ready to spray an island and I plan on using the hardener in the primer for this job.
@@woodwork740 I’m new and I have only used Sherwin Williams Kem Aqua which is really easy to use, but I want step it up and give this a try.
Did you add hardener to primer?
So update to the catalysed primer. Sprayed yesterday and today, catalyzed. I had some serious runs in my paint. I'm thinking it's equally 50-50 that I thinned the paint too much, and that Semipro 2 is just to entry level of a unit. After sanding the runs out I sprayed the second coat without catalyst and thinned it per directions and I still had some, but not a lot of runs on the second primer coat. I think when I apply the top coat I'm going to keep it a little thicker than what I'm accustomed to and see if that helps keep it in place as it cures out
Centurion 2K system produces inconsistent finish results.
I've had much better results with it than I've had with Sherwin Williams emerald enamel or Benjamin Moore Advance. Both of those of are decent products but I don't have 3 days to wait for them to dry.