Same power/weight as a 5105, and they've been out a loonnngg time lol. Nice runners for sure and they handle better than a 5105, and they have those awesome flippy caps. I still prefer my late model 550mk1's, much lighter and they handle very well with an 18x325and get incredible fuel economy.
Oh you tease! I was waiting for the final cut with the big bar!! I've had a 550xp mk2 for about 18 months. The speed and power and balance is far better than my older 50 and 51 and 55 Huskies, and it makes an excellent companion to the 572xp and the 500i. My only complaint is that I cannot get the oiler to keep up, even at the top setting. I did change to a 3/8 sprocket rather than .325 so I could take advantage of other chains and bars. Thanks for the video--I'll be waiting for Part 2!!
Foarte bună am tăiat cu una mie personal mi sa părut mai rapidă față de ms 261 care am tăiat şi cu iel ori că la 550 lanțu lam ascuțit ieu cu pila la ms 261 a fost ascuțit cu pilă în suport un versus între cele două aştept dacă se poate respect.
O da da, clip nou. Data creieri acestui clip anul 2020 înainte de hristos, postat in 2022 după hristos 🤣🤣🤣 😈 Merge fain 550mk2 merită cumpărată . Continuarea după reapariția dinozaurilor, nu? 🤣☠👍
I have watched alot of ported saws. They crank them up but, you can't lean on them or they poop out. I have a ported ms 250. I can lean on it. But I keep it a bit rich. 45cc saw it will out cut a 346xp. Same sharp chain. Looks like the 550 does a good job. Very stout saw in hardwood for 50cc. I believe sharpness of chain makes a big difference.
Just bought mine, started right up at the dealer. Then I brought it up the mountain to 9000 feet elevation to my house and it probably took 20 pulls to get it to start and at first it refused to idle. Had to do a tuning cut to dial it in, now it starts right up.
Hello, nice 👍 is this saw good for felling and bucking beech or locust tree's diameter 75cm? just s few trees we got that big, others are smaller 30-50 cm, like 70% of our forest.
Bom dia compadre Ramiro caboclo 🤠 bão essa sua nova motosserra mais bonita da Suécia e do Brasil é a Husqvarna 550XP Mark|| pra você cortar as melhores madeiras chique no úrtimo
Bună seara maestre.vreau să îmi cumpăr o drujba profesională și am nevoie de un sfat dacă poți te rog să - mi spui care model dintre Husqvarna sau Stihl ar fi mai bună
Salut! Ambii producatori au drujbe foarte bune, fiecare cu avantaje si dezavantaje specifice fiecarui model. Trebuie sa alegi in functie de buget, ce lemne si sa tai, si bineanteles ce volum de munca... Numai bine!
Am achizitionat si eu 550xpg mk2 si mai am un 572xp ,si am luat un litru de ulei xp pt amestec. Am vazut ca este sintetic si ma gandeam sa fac amestecul cu 25ml la l benzina premium. Este ok sau e mult ulei?
No break in needed. He just Starts cutting. There really is No " break in" with a two Stroke. Just allow the same Some warm up time and You won't score you cylinder And piston.
@@poparamiro...eu detin primul model de 550 xp din 2017 si nu mi-a facut probleme nici in perioada de garantie nici post garantie. O folosesc cu lama de 45 de la Sugihara cu cap interschimbabil, canal de 1,5 lant tip dalta deoarece in zona de unde sunt am padure de salcam si stejar asadar esente tari dar am achizitionat si lant semi dalta toate sunt originale Husqvarna, lama originala de 38 cred ca nu am folosit-o decat la prima pornire apoi am pus-o la pastrare. Pentru lucrarile curente din gospodarie folosesc bijuteria 136 pe care o am din 2007 si care functioneaza perfect, nu am pus decat bujie( pe care le schimb obligatoriu odata pe an) NGK BPRM7A ( 136)sunt destul de ieftine si la fel ca si filtrul de carburant prefer sa le stiu in perfecta stare de functionare. Pana sa achizitionez 550 xp-ul 136 isi facea treaba cu succes dar adata cu diametrele de peste 40 cm am considerat ca 550 xp-ul este mult mai potrivita. Acum...ramane sa vad daca 572xp-ul sau 592 xp-ul ma ajuta si la padure unde diametrele stejarului sunt de peste 50 cm...asa ca pana in primavara am timp sa ma decid si sa-mi fac temele temeinic inainte sa achizitionez una din cele doua ,,masini". Felicitari pentru clip!
That 550 seems like a hot rocket right out of the box. I have a rancher 450 but its pretty weak. My main firewood saw is a 390XP. I run a 22" bar on it mainly and also a 28 a fair bit and have a 36 also. Looking for a lighter saw for the smaller stuff. Going back and forth between the 550 and 562. whats your opinon?
I own an older 362xp and some bigger saws. When I go to limbing I will grab a 45cc saw. You can get more work done with the bigger saws, but they will tire you out more. Takes away the extra strength and energy you need for loading. I wanted a 346xp. But got a good deal on a blown up stihl ms 250. I put a new engine in it and opened up the ports and muffler. Cuts like a 50cc saw. That 390xp is a hoss. I just bought a 395 clone. Very pleased with it. Big wood big saw. Small wood small saw. Each tool has its purpose. My go to saw for heavy work is a 372. I don't know much on the newer saws but I figure they are about the same just a bit lighter with more power.
Since new, I have had nothing but problems with the performance of this model. SORRY FOLKS.... I once worked for a husky dealership...so, I bought one... Buy a Sthil... I own 7 Sthil chainsaws. My little Sthil 025 outperforms this Husky....Sorry... Warranty...WHAT WARRANTY...if I took it in to a shop...there is no warranty. I am better to tear it down and figure what is wrong... It has one of these auto-tune carb/fuel systems ... garbage... Old school carbs... my Sthil...25 year...and my 1st carb kit installed...AMAZING
I own both an 025,MS250 ,a 261c and the 550 xp mk2 in the video and I think anybody that has ever run an 025 or MS250 Stihl or even the pro model 261c knows this saw outperforms all 3. It blows the 025/ms250 away but whatever you say..😂 And to say it doesn’t have a warranty is a another blatant lie.
You got a lemon,025 out perform a 550?thr 550 competed or beats the crowd loved husky 61 model in its claimed 3.9 hp and the mark 2 is claimed 4.0hp..if the 025 performs anything like my ms251 even tuned really lean you really got a lemon of a 550 or you dont under stand they tune off wide open throttle,that means long unneeded idle times messes with the tune.my 550 even makes my 257 look dated and under powered
Socru-miu fiind fan Husqvarna,modelul asta i l-am reconandat.
Ce sa-i faci,reginei tocmai i-a ruginit coroana 🦽🦽🦽
🤣🤣🤣 e cu dublu inteles. 🤣🤣 la ăla casat i ai recomandat 550 si la celalalt 592 ☠🤣🤣
@ celalalt nu-i multumit doar cu 550 🤣.
Are pitici pe creier 🤦♂️
Recomandari rautacioase 😁🤣☠️
Ca performanta e ceva aparte, pacat de greutate, dar nu poti avea tot..
Numai bine si spor!
Arguably the best 50cc class saw ever.👍🏻
For sure it has some very strong performance!
Thanks for watching and all the best!
Same power/weight as a 5105, and they've been out a loonnngg time lol.
Nice runners for sure and they handle better than a 5105, and they have those awesome flippy caps.
I still prefer my late model 550mk1's, much lighter and they handle very well with an 18x325and get incredible fuel economy.
@@brettblack7049 and here I’m a Dolmar guy🤣 this is the same argument I’m always having between the 7900 and 500i
@@brettblack7049 yes, 5105 is great too...
True, MK2's problem is weight...
Thanks for watching and all the best!
🤝🤝🤝
@@IndianaDoug both great, but i preffer 7900...
Oh you tease! I was waiting for the final cut with the big bar!! I've had a 550xp mk2 for about 18 months. The speed and power and balance is far better than my older 50 and 51 and 55 Huskies, and it makes an excellent companion to the 572xp and the 500i. My only complaint is that I cannot get the oiler to keep up, even at the top setting. I did change to a 3/8 sprocket rather than .325 so I could take advantage of other chains and bars. Thanks for the video--I'll be waiting for Part 2!!
Thanks for watching and best regards!
What chain size/model.
RS 325 all cuts
Thanks for watching! :)
Foarte bună am tăiat cu una mie personal mi sa părut mai rapidă față de ms 261 care am tăiat şi cu iel ori că la 550 lanțu lam ascuțit ieu cu pila la ms 261 a fost ascuțit cu pilă în suport un versus între cele două aştept dacă se poate respect.
Versusul e facut deja, o sa vezi in curand daca ti s a parut sau chiar asa este 😁
Toate cele bune si spor! 🤝🤝🤝
Monster of a 50cc saw!!
Very nice
😁
Thanks!
Best regards! :)
Super fain numai scule bune 👍👍
Cum sa nu fasonezi cu placere cand ai un lucru bun in mana SUCCES in continuare
Multumesc, toate cele bune!
🤝🤝🤝
Impressive for 50cc but you must have sharpened chain before the cuts .
Yes, a great stoc performance!
Out of the box badass!
Exactly...
Thanks for watching and all the best!
Salut ce prindere are la sina?K095? Sau D009?
Salut!
K095
O da da, clip nou. Data creieri acestui clip anul 2020 înainte de hristos, postat in 2022 după hristos 🤣🤣🤣 😈
Merge fain 550mk2 merită cumpărată . Continuarea după reapariția dinozaurilor, nu? 🤣☠👍
🤣🤣, nu chiar, poate maine 😁💪💪
Numai bine!
Bun,se cere modificata! :D Are cuplu bun pt stock,zic eu ca e mai buna ca 550 .
🤣Cu siguranta...
Numai bine! 🤝🤝🤝
a new bar per log 😂
😁
Thanks for watching and all the best!
Здравствуйте! Подскажите пожалуйста , какой ресурс у бензопил Holzfforma ,если сравнивать со Stihl и Husqvarna.
Hi!
What you meam by resources!
Thanks for watching and all the best!
@@poparamiroHe meant lifespan
Sayang nya type ini tidak di jual di Indonesia 😭😭
Too bad, it is a great saw!
Thanks for watching and all the best!
I have watched alot of ported saws. They crank them up but, you can't lean on them or they poop out. I have a ported ms 250. I can lean on it. But I keep it a bit rich. 45cc saw it will out cut a 346xp. Same sharp chain. Looks like the 550 does a good job. Very stout saw in hardwood for 50cc. I believe sharpness of chain makes a big difference.
Well said!
Thanks for watching!
Just bought mine, started right up at the dealer. Then I brought it up the mountain to 9000 feet elevation to my house and it probably took 20 pulls to get it to start and at first it refused to idle. Had to do a tuning cut to dial it in, now it starts right up.
Imi poti spune vreun site sau loc de unde pot lua un buson/capac la rezervorul de benzina pentru un stihl 660? Efectiv nu gasesc
Ai incercat la roco piese sau la un dealer stihl?
Pe site la FarmerTec sigur gasesti dar costa transportul...
Numai bine!
Hello, nice 👍 is this saw good for felling and bucking beech or locust tree's diameter 75cm? just s few trees we got that big, others are smaller 30-50 cm, like 70% of our forest.
Thanks!
Wel said, thanks for watching and comment!
Bom dia compadre Ramiro caboclo 🤠 bão essa sua nova motosserra mais bonita da Suécia e do Brasil é a Husqvarna 550XP Mark|| pra você cortar as melhores madeiras chique no úrtimo
Thanks for watching!
Super akce tank Husqvarna 🎻🐲😀🌽🐑🌲🐉💸✊🐓💰😛🐻😅🐙😆🚜🐯☀️🦆♥️🏍️😝🌊🍗👀👀👀👀💪💪💪💪💪
Numai bine!
It’s everything a 261c wishes it was.. lol 😆 j/k 261c is a good saw.
😁🤣
Good joke!
Both are good, each with advantages and disadvantages...
Thanks for watching and all the best!
Great technique breaking in the engine…light load, short duration cuts to slowly build up the load and heat
Thanks!
Best regards!
Bună seara maestre.vreau să îmi cumpăr o drujba profesională și am nevoie de un sfat dacă poți te rog să - mi spui care model dintre Husqvarna sau Stihl ar fi mai bună
Salut!
Ambii producatori au drujbe foarte bune, fiecare cu avantaje si dezavantaje specifice fiecarui model.
Trebuie sa alegi in functie de buget, ce lemne si sa tai, si bineanteles ce volum de munca...
Numai bine!
I used one a guy let me borrow for a bit. Very nice fast cutting saw
True, cuts nice !
Great looking saw. But it s missing something here.. The guardian and the spy😁😁☢️. Salutări maestre. Clip super fain. 🤝🤝🤝🤝
True
Salutare!
Multumesc!
Erau in tabara de antrenament 😁🤣
Toate cele bune!
@@poparamiro, oricum sunt adorabile😍. Salutări bun prieten🤗🤝
Si vroiam sa intreb pt 550xpg mk2 o gheara profi daca i mi ooti spune de unde pot achizitiona?
Nu stiu daca este, cred ca doar daca modifici una mai mare sau ii faci alta...
I bought a new 550xp mark 2 but it was build when I walked into the store even after I ordered it. No box like this .
🤝🤝🤝
Salutare,faina drujba,toate cele bune îți doresc👍✌️💣💪🤝🤝🤝🤝
Salutare, multumesc!
Toate cele bune!
Man! What a tease at the end! Good video 👍🏼
😁
Thanks for watching and all the best!
Cred ca sunt destul de reusite mark 2 urile astea....dar dupa atatea barosane cred ca ti se pare un fulg 550 ul...toate bune spor!
Depinde, senzorii mei sunt decalibrati 🤣
Toate cele bune!
Có bán không anh ơi em đang muốn mua một máy
Sorry, not for sale...
Thanks for watching and best regards!
It is impressive but why Oregon guide bar?
For break in is perfect 😁
Thanks for watching and all the best!
Merge într-un mare fel de bine și stock 550 XP,,te ai husvarnit de-o vreme 😉😎😎🤓🌶 .like
🤣💊
Foarte bine merge pentru era EPA si a limitarilor...
Numai bine si spor!
🤝🤝🤝
@@poparamiro mai un 365 xtorq nou să l găsești în pădure
Ești la rând. 👌😎😎🐇🌶
@ Ar fi bun, pus set de 75cc pe el, da ceaiul la multe jivine noi si renumite... 🤣
Nagyon jó fűrész ismerősömnek is ijen van! Kis méregzsák!🇸🇪💪👍🤝
Yes 🤣
Thanks for watching and all the best!
🤝🤝🤝
@@poparamiro Viszont kívánok neked is minden jót!!🤝
$1575 AUD in Australia! The one with auto tune was a shocker had a lot of issues starting esp after idling or short breaks.
Very expensive!
Thanks for watching and all the best!
With us it's 1060.00 AUD with 15" bar! 545 it's 880 AUD
Klau masih baru hidupin biar lamak dulu
Thanks!
Best regards!
Beautiful shape, strong, I like it ❤️
A great chainsaw!
Thanks for watching and best regards!
Great looking set up can’t wait to see the long Stihl bar in action. Thanks for your video
Thanks for watching!
🤝🤝🤝
Now you’ve got the set of 50cc’s let battle commence
For sure 😁
Thanks for watching and best regards!
🤝🤝🤝
Quá đã bạn ơi
It is a friend's chainsaw, it came for modifications...
Thanks for watching and best regards!
Am achizitionat si eu 550xpg mk2 si mai am un 572xp ,si am luat un litru de ulei xp pt amestec.
Am vazut ca este sintetic si ma gandeam sa fac amestecul cu 25ml la l benzina premium.
Este ok sau e mult ulei?
E ok 25
@@poparamiro si asa ca si calitate o parere de ulei
Xp de la husq sau hp ultra de la stihl?
@@DragosPaun88 amandoua sunt bune...
👍👍👍🤝🤝🤝🤝💯💯💯
🤝🤝🤝
The chain is 1,3mm or 1,5mm ?
1.5 ...
Thanks for watching!
20" speedcut is a great on the 550xp
Yes...
Thanks for watching and all the best!
Super, ce iti mai lipsește ca sa le ai pe toate? Te salut si spor la treaba
Multumesc!
Nimeni nu le are pe toate, iar nebunia nu se opreste niciodata 💊🤣🤣🤣
Toate cele bune si spor! 🤝🤝🤝
550xp 👉👍🏼👍🏼👍🏼
O creatie de top! 💪
🤝🤝🤝
Factory hot saw !!
Just added a 20" bar, though cut proof pants?
It's a Work-Horse for sure.
Great performance in stock form..
Thanks for watching and all the best!
Cliffhanger. 😬
😁
Thanks for watching and all the best!
Berapa harganya
Thanks for watching!
👍👍✨✨👍👍
Thanks for watching!
For how long do you break it in?
Great video.
About 2 tanks!
Thanks for watching and all the best!
@@poparamiro Thank you very much! And all the best to you too!
No break in needed. He just
Starts cutting. There really is
No " break in" with a two
Stroke. Just allow the same
Some warm up time and
You won't score you cylinder
And piston.
Proper saw pure power
Thanks for watching and comment!
Cómo viene el carburador de ese modelo? Un poco más de detalle sobre la estructura del carburador
It is an electronic carburetor with autotune feature...
Thanks for watching and all the best!
Por favor una respuesta con traducción en español..se agradecerá
@@aggeocastillo4864 Well, maybe in the future...
Thanks for watching!
Dice qué el carburador es electrónico con opción de ajuste automatizado
Подари!
Eu am redenumit-o ,,Vesper"!
🤣🤦♂️😁
E o drujba de exceptie din clasa 50cc, nu perfecta totusi...
🤝🤝🤝
@@poparamiro...eu detin primul model de 550 xp din 2017 si nu mi-a facut probleme nici in perioada de garantie nici post garantie. O folosesc cu lama de 45 de la Sugihara cu cap interschimbabil, canal de 1,5 lant tip dalta deoarece in zona de unde sunt am padure de salcam si stejar asadar esente tari dar am achizitionat si lant semi dalta toate sunt originale Husqvarna, lama originala de 38 cred ca nu am folosit-o decat la prima pornire apoi am pus-o la pastrare.
Pentru lucrarile curente din gospodarie folosesc bijuteria 136 pe care o am din 2007 si care functioneaza perfect, nu am pus decat bujie( pe care le schimb obligatoriu odata pe an) NGK BPRM7A ( 136)sunt destul de ieftine si la fel ca si filtrul de carburant prefer sa le stiu in perfecta stare de functionare. Pana sa achizitionez 550 xp-ul 136 isi facea treaba cu succes dar adata cu diametrele de peste 40 cm am considerat ca 550 xp-ul este mult mai potrivita. Acum...ramane sa vad daca 572xp-ul sau 592 xp-ul ma ajuta si la padure unde diametrele stejarului sunt de peste 50 cm...asa ca pana in primavara am timp sa ma decid si sa-mi fac temele temeinic inainte sa achizitionez una din cele doua ,,masini".
Felicitari pentru clip!
počuli ste spev H 266? a spev H 288, či H 365 tak toto si dajte zarámovať sedliaci
H 385 je národná hymna toto sú črepy
@@milannemec9803 Great saws!
Thanks for watching!
Un versus 261c, sunt curios
E facut deja, si stoc si modate/ 80cm, big wood 😁🤣💪
🤝🤝🤝
@@poparamiro care ti se pare mai manevrabilă, ușoară dintre 261c si 550 mk2?
Pune clipul cu versus-ul 😆
@@uAeeb 🤣 urmeaza si ala...
Nu sunt nici pe deoarte un expert in evaluarea manevrabilitatii si confortului, dar prefer 261 pentru lucru...
Achiziții noi pe banda rulanta. 👍
E veche filmarea, drujba e a unui prieten, a venit la modificat...
Numai bine si spor! 🤝🤝🤝
@@poparamiro Ok. Eu ma gândeam ca ai un nou material de teste pt. Top 50 cc😁
@@alexandrupuiu1985 E facut si best 50cc chainsaws test :D
@@poparamiro Așteptăm. Zi faină 🙋♂️
@@alexandrupuiu1985 Cred ca apuc sa il pun in Decembrie... 😁
Numai bine! 🤝🤝🤝
Love the 550xp!
It is a great chainsaw...
Thanks for watching and all the best!
That 550 seems like a hot rocket right out of the box. I have a rancher 450 but its pretty weak. My main firewood saw is a 390XP. I run a 22" bar on it mainly and also a 28 a fair bit and have a 36 also. Looking for a lighter saw for the smaller stuff. Going back and forth between the 550 and 562. whats your opinon?
I own an older 362xp and some bigger saws. When I go to limbing I will grab a 45cc saw. You can get more work done with the bigger saws, but they will tire you out more. Takes away the extra strength and energy you need for loading. I wanted a 346xp. But got a good deal on a blown up stihl ms 250. I put a new engine in it and opened up the ports and muffler. Cuts like a 50cc saw. That 390xp is a hoss. I just bought a 395 clone. Very pleased with it. Big wood big saw. Small wood small saw. Each tool has its purpose. My go to saw for heavy work is a 372. I don't know much on the newer saws but I figure they are about the same just a bit lighter with more power.
Since new, I have had nothing but problems with the performance of this model. SORRY FOLKS.... I once worked for a husky dealership...so, I bought one... Buy a Sthil... I own 7 Sthil chainsaws. My little Sthil 025 outperforms this Husky....Sorry... Warranty...WHAT WARRANTY...if I took it in to a shop...there is no warranty.
I am better to tear it down and figure what is wrong... It has one of these auto-tune carb/fuel systems ... garbage... Old school carbs... my Sthil...25 year...and my 1st carb kit installed...AMAZING
Thanks for info!
Best regards! 🤝🤝🤝
I own both an 025,MS250 ,a 261c and the 550 xp mk2 in the video and I think anybody that has ever run an 025 or MS250
Stihl or even the pro model 261c knows this saw outperforms all 3. It blows the 025/ms250 away but whatever you say..😂 And to say it doesn’t have a warranty is a another blatant lie.
You got a lemon,025 out perform a 550?thr 550 competed or beats the crowd loved husky 61 model in its claimed 3.9 hp and the mark 2 is claimed 4.0hp..if the 025 performs anything like my ms251 even tuned really lean you really got a lemon of a 550 or you dont under stand they tune off wide open throttle,that means long unneeded idle times messes with the tune.my 550 even makes my 257 look dated and under powered
The 550xp mk2 pulls higher than it’s factory rated on a dyno at 4.8 hp. There’s no way your 025 beats it lol.
That's funny considering the 550 outruns a 261. Hard to say what you have going on
At time 8:15 he has better eyes than me .
Thanks for watching and best regards!