Great tutorial, upgraded to a 1tb ssd fine but had a very slight issue after the restart. Controller turns on system but when it gets to the user selection screen the controller lights would constantly flash and not connect. I found a fix, turn the power off at the wall on the user selection screen. When I booted it back up the console complained about an improper shutdown, scanned for errors and when it came back on the controller now works fine from turning the console on.
If the option wasn’t in your settings and your on dex go to rebut toolbox (install it if you don’t have it) go to debug menu type and select CEX QA and then the option should be in your debug settings make sure your second hdd is formatted to fat32 before you transfer worked perfectly for me first try thank you!
you have any idea why it still wouldn't be working? my drive has been formatted to fat32, but every time I try the ps3 says build error and then asks to format the drive which ive done 2 times now
Why SSD you paid more money for no reason. The PS3 only has a SATA 1 controller. A SSD is SATA 3. So basically you are completely bottlenecking the SSD (you are getting the same speeds as the HDD)
@@User_1795 i know, but i have plenty of ssd around and well, the ps3 is moved a lot because the kids watch plenty of blurays . no moving parts no fear of headcrash
Thanks. I didn't even know this utility existed. I have done multiple hdd swaps and this was the easiest. Yesterday I upgraded 2 ps3 slims to ITB with this method.
Hello, after the HDD copying process is completed, is the data in the first HDD to which we copied the data deleted at the end of the process, or does it remain intact so that we can use it as a backup in the future?
Thank you for the great informative video ,. It works and is simple upgraded 160GB to 500GB PS3 cfw. Will easy upgrade to 1TB with no worries , thanks a 1,000000.
I have rebug lite 4.86.1 CEX and it worked perfect! i just enabled the debug settings under the network options because it was hidden with this combination (L1+R1+L2+R2+L3+Down arrow on keypad you should also have enabled Qa flag in the rebug toolbox menu or else it wont work) then i followed the procedure and everything went as shown on the video! thanks ModzLink :) , i also believe that if you get errors on the procedure then you propably have damaged hard disk (main or the exchange one) bad sectors or weak sectors or transfer errors issues , just before you start check your drives with Hdsentinel and do a short self test just for sure :D
hey i downloaded hdsentinel and the tests ran fine. I've done debug hdd utility twice already and keep coming up with "an error occurred during the copy operation 8001000b" right before the hdd copy finishes on the PS3. It would be 99% and the error pops up. Any tips?
@@Thenormalguy_real_one you just long press the power button for 10 seconds and then again you press it for awhile. There are videos online i recommend you look on RUclips how to turn on ps3 on safe mode there is many videos
I need to find out how to store the updates for iso based games on a NTFS flash drive I can put the game on the drive but the update is put into internal storage and my PS3 has flash memory so you can see the issue there
I found this video's method the most detailed and simpliest way to upgrade the HDD of my PS3, so I've ordered a Seagate FireCuda SSHD 1TB drive and a SATA/USB adapter according to the video. I had Rebug CFW 4.81.2 REX on my system and I couldn't find the Debug for HDD Exchange Utility for the first sight... After some research I figured I have to switch the Debug Menu type to CEX to make it available, so I was good to go, but after 2 hours of copying i've got the "error occurred during the copy operation (800100B)" message, so I've formatted the drive on my pc to FAT32 and tried again...same results, I tried it again thinking it might have been just some reading/writing error, but no luck after another 2 hours. Then I just switched to 4.81.2 D-REX firmware following the instuctions of another modzlink video, but the same error occurred during the copying progress to the new drive. So now I'm on 4.81.2 D-REX and I removed some stuff of the already small 120 GB initial hard drive to make it copy only like 69GB total, surprisingly the processing still took 2 hours and the result was the same error emssage. In the end I just used the backup utility with a thumb drive which took only about 30 minutes, swapped the drives and I was ready to install the CFW on the new drive, but... by some miracle the Rebug booted on and seems like all the 69 GB has been copied to the new hard drive, I have everything I had before with additional 880 GB space. Also I didn't have that Rebuilding data on the disk screen at all, nor the exchange completed or restart the system message, after the hard drive swap it looked like everything is great, no message indicating the hard drive has changed. However after I've restarted the console a new message came up about corrupted files and telling me the storage must be formatted and all data will be deleted, so I still had to restore my backup from the thumbdrive.
Hello, after the HDD copying process is completed, is the data in the first HDD to which we copied the data deleted at the end of the process, or does it remain intact so that we can use it as a backup in the future?
much needed utility for jailbroken sets. PS3 discs are bluray which makes the game sizes huge. 250gb just doesn't cut it. And the drive is encrypted making cloning tools like Clonezilla and Macrium useless.
Okay ... since soooo many people have been reporting problems on a hard drive exchange on a 4.81.2 Rebug CFW ... I have now successfully exchanged 3 hard drives on this firmware. So I would like to post the steps I go through... If ModzLink doesn't care that is: Note: each of these exchanges was performed on ReBug CFW 4.81.2 D-REX... if you're on straight Rebug CEX 4.81.2 I recommend updating to the DRex as you are able to change the target ID from CEX and DEX on the DRex version found on Rebugs website. I also used a radio shack branded USB 3.0 to Sata cable plugged directly into the new hard drive as seen on this video. The hard drive I chose for all 3 was Seagate 1TB SATA Laptop Hard drive powered by Barracuda(w/e the fk that is).. it was like 70$.. the adapter probably doesn't matter as to which one you use. I turn on the PS3 and I go to Rebug toolbox to make sure that QA Toggle is enabled. I then go past system information all the way to the right to the last menu subheading and then all the way down to the very last option which should be "change ps3ID" and I select 84 CEX... I exit back to the xmb menu. Then the procedure i have been using is pretty much the same as seen here in the video.. you go to debug settings under settings in the xmb menu as shown and then to HDD exchange. Follow the steps to physically replace the drive as shown in the video. I would however let the PS3 cool down for about an hour after copying the drive over before exchanging the hard drive. I then plug everything back up and turn it on.. it rebuilds the data and gets stuck at about 70% and then goes through, again, shown in this video.. but have patience it will go through. It will then restart and the first time your profiles load it will be a little laggy but it will go away once you go into your profiles and restart.. wallah.. everything is new again. Huge shoutout to ModzLink for this video and the inspiration to help people who were having probs on 4.81.2 Rebug..
Grey Skies if it doesn't show up I would recommend updating to the newest drex. But that could also fuck up all your other stuff ...so you can do it a different way which may be easier for you. Go to back up utility and make a backup to a USB external hard drive. Synchronize trophies with the server. If you care about this. Remove and exchange internal hard drive. Keep the Internet disabled beyond this point. Make sure you have your current custom firmware or higher on a USB drive in the right hand USB socket. Plug in your controller to the other socket. Boot your PS3 into restore/recovery/safe mode. Not hard to do. Many tutorials on how to do this. A matter of pressing the power button a number of times. Hit restore. It'll want to install firmware. Make sure you install firmware from the USB drive with your firmware on it. Follow on screen instructions until you get back to main PS3/Rebug menu, plug your external drive back into the right hand USB socket and go to settings and back to back up settings. Hit restore from back up and select your back up. It'll do its thing and restart. And there ya go. But you do need to make absolutely sure QA is toggled either way. You can do this in Rebug toolbox.
@@captawesome11 I'm new to ps3 jailbreaks and ps3 modding in general, my console came with a 100gb internal hdd, which is garbage, i'm in the process of upgrading to a 500 as its all i have lyinga round. What i have done so far is in RebugToolbox turn Q/A toggle to enable, change ps3ID to CEX 84, then somewhere else in rebug toolbox there was a option called DebugMenu type, i just changed it to CEX also, and now the Debug HDD Utility Exchange shows up, right now its cloning to the new drive. Hopefully i wont experience any errors...
Hello, after the HDD copying process is completed, is the data in the first HDD to which we copied the data deleted at the end of the process, or does it remain intact so that we can use it as a backup in the future?
my debug for hdd exchange was not there at 1st and im on cfw rebug cex 4.81.2 all i did was go to rebug tool book, xmb to debug then go back to xmb then debug settings and there it is .
I'm new to ps3 jailbreaks and ps3 modding in general, my console came with a 100gb internal hdd, which is garbage, i'm in the process of upgrading to a 500 as its all i have lyinga round. What i have done so far is in RebugToolbox turn Q/A toggle to enable, change ps3ID to CEX 84, then somewhere else in rebug toolbox there was a option called DebugMenu type, i just changed it to CEX also, and now the Debug HDD Utility Exchange shows up, right now its cloning to the new drive. Hopefully i wont experience any errors...
People dont do this. You're risking a YLOD here and it takes a very long time! Just use HDClone to create a bit-by-bit copy of your ps3 hdd to a bigger (possibly faster) hdd.
Are you sure this method isn't exclusive to same-sized HDD? Source: www.reddit.com/r/ps3homebrew/wiki/new_hdd Edit: just tested and he is right, worked like a charm. Waaay easier than the wiki page I posted, but It is still worth giving it a read.
I also got a black screen, it doesn't even start to copy stuff to the new HDD, can you please help us? :) Should I downgrade to 3.55 as you explain in your 4.75.1 video? I am currently on 4.78.1 Thanks in advance!
Very informative video! Can I have a question? The process is same with old phat model - NAND system? And before transfer hdd need to be formated at any system like fat32,ntsc....?
I'm getting the same fault as KyleCFW. The PS3 did not reboot to ''Copying'' and I've got no signal on the tv? Though its still running. I had to shut everything down and restart my ps3 in safe mode. Luckily its still working ok.
for hard drive 1tb what are the features ?, measurements are 2.5' 9.5 mm ? sata 3 is compatible ? 7200 is good? , how much cashe memory ?, hdd usb 3.0 is compatible to put it internally? the best brands? thanks anyway
so i have a Fat CFW evilnat 4.91.2 model, it has a 60 gb disk and i want to upgrade it, the HDD has 0 stuff in it besides a virtual memory card for a ps1 game, i have read that replacing the HDD wont delete the CFW but, do i must backup the original drive? it doesnt have anything, is there something that it is supposed to backup thats completely necessary for a correct upgrade? its a NAND system
Don't upgrade to SSD. Your just paying more money for no reason. The PS3 is SATA 1. A SSD is SATA 3. You are completely bottlenecking the SSD at 150mb/s. You can get a 1TB HDD for like as low as $20-$35
Glad it helped you out. You may also want to consider trying out the brave web browser every download helps the channel and it's much better for your privacy. brave.com/mod553
You guys just swap the new Hdd card and boot the ps3 in safe MOde , and choose format ps3 , and thats all , the ps3 will format the new Hdd card , and u can choose to update if u want to but be careful if you have a JAILBREAK PS3 !
Hey, I had a question about when copying the to the new hard drive. I keep getting an error around 93%. It says "An error occurred during the copying operation." (02005120) Thanks.
Hey there I was checking out your videos .. I wanted to ask about JB PS3's is the same as an XBox 360 JTAG"d meaning able to do the same things ?? If so i was checking out your website consoles for sale. Im very interested do I have an option of mailing you my unit and having it Mod'd ?
I have a problem. I booted up my ps3 and I hooked up an external hdd and my ps3 froze up. Now it keeps wanting to fix corrupted data over and over again. Went into safe mode and still didn't fix it. I've got another hdd coming this weekend and was wondering if reinstalling my CFW after installing hdd would that automatically format the hdd to fat32 or do I have to do it manually? Or would that even fix my problem? Would I have to restore my ps3 and lose CFW?
Great. Can i swap Jailbroked HDD by regular one and just use whenever i'll need it? Will JB HDD stil functional after swap? I have given PS3 Slim with some games installed on it already. Firmware version shows 4.76. So i'm assuming it's a moded PS3 but i couldn't find any CF or MultiMan installed on it. How i know you can't insall games on HDD with Official Firmware. Any idea? Thanks.
ı did all the steps same way. when ı try to start ps3 new hdd it give error. an error occured during the rebuild operation.the system storage must be formatted. all data on the system will be deleted during formatting. do you want format? please help me what can ı do
So what I did was a mix between the following: To add context: I upgraded from 160Gb HDD to 1TB 7200RPM HDD on Rebug 4.81 DEX. - community.eu.playstation.com/t5/PS3-Support/Error-at-70-of-rebuild-process-when-adding-1tb-hdd-to-12gb-super/td-p/17599604 And, -www.ps3hax.net/showthread.php?t=99082 The steps: 1) Enter Safe mode: "(Hold down the power button on the console waiting for the first beep, then keep it depressed until the console switches off completely. Remove your finger from the button. Then, hold down again, wait 5(ish) seconds for the console to beep, then wait 2 further seconds for two successive beeps. After the second beep, take your finger off the power button)" 2) Select first option 3 and then 4. Quoting Playerkp420: "Option 3. Restore File System and Option 4. Rebuild Database, will not format the HDD. But after choosing Option 3. it is normal for the PS3 to say something is corrupt then restore the file system. Even if nothing is corrupt. It does the thing like when the ps3 wasn't shut off correctly, but nothing should get formatted. If you cancel it after starting though, it will probably want u to format." However when I go to check the free space it still says the same amount as on the previous HDD, 122GB/931GB, and it should be something like 893GB/931GB, what can I do for it to be detected properly?
To fix the incorrect free space shown which was apparently because it had all of its space unallocated and when restoring it only allocated 160gb as per previous HDD since it couldn't perform the rebuild successfully, I formatted the HDD, it kept the CFW and it now shows the correct amount of space however the data was deleted. To recover the data I restored it from a backup I did as a failsafe. So I didn't have to reinstall CFW with pendrive but had to follow some steps from this other guide: ruclips.net/video/HyjXR9GMjfw/видео.html Now it does say 828GB/931GB which is what is expected from a 1TB HDD. For the trophies I backed up the whole "dev_hdd0\home" which includes the "Trophy" folder via FTP and sent it back to the new HDD the same way.
@@nicolasbuitrago8484 hey can you help me,? I installed a 500gb drive and it says only 20gb available obviously it’s unallocated how do I format it without losing my cfw?
Hello, after the HDD copying process is completed, is the data in the first HDD to which we copied the data deleted at the end of the process, or does it remain intact so that we can use it as a backup in the future?
I have 4 ps3 which 2 are jailbroken already with many games on each. My question is that my old ps3 launch edition I want to install 500gb drives and I would like to copy just the games, but I do not want to do it from the bluray unit. Can I just copy from one drive to another?
I did this upgrading to 1 TB from 320GB. I'm on rebug 4.84 cfw and cloned it using the hdd tool. I popped the new drive in and it says I only have 50 GB available outta 960 GB. Can you help me out with how to make the extra space useable?
HI, can you tell me why i try to Upgrade my Jail broken PS 3 Hard Drive i did fallow the way you show but after rebuilding data on the Hard Drive about 70% got error and corrupted what happen with ?
Hello, after the HDD copying process is completed, is the data in the first HDD to which we copied the data deleted at the end of the process, or does it remain intact so that we can use it as a backup in the future?
After the process is finished and I plug in the new hard drive I get "an error has occurred during the rebuild process" and have to format it and try again. This has happened twice now, how do I fix this? I'm using PS3Hen instead of Rebug if that's important.
am on rebug 4.84 REX tried this... everything went well until it reaches 93% while copying and then an error occurs. did it twice same error at 93% any help please thanks.
i have done this tutorial, just not sure if i am on CEX or DREX but after i used HDD Exchange Utility, the New Harddrive shows wrong information of available space...btw my OLD hdd is 160gb and upgrading to 250gb... thanks i you could help me
I have a HDD external dock with 2 slots. Can i just clone my internal ps3 HDD into a higher capacity one? Would that work and have the extra space visible to the ps3?
Once I finished upgrading the HDD, I didnt get the option or anything saying "rebuilding database" and its still showing as 500mb free (Which is wrong, I upgraded from a 40GB because it was full) any ideas?
Right Now I Have PS3 Slim And I Want To Upgrade It To 500gb From 111gb and I Didnt Buy The Usb To Adapter Thing Yet But Im Not Able To Find Debug For HDD Exchange Utility, I Am On Rebug 4.78, Please Help Me
Modzlink could you please make a video on how to install games without actually installing them through the game help and If I used my 1tb Hargrove from my laptop will that work on my cfw ps3
to backup games without you owning the games is piracy and modzlink doesnt promote that in any way. and i think installing a laptop hardrive should work the same way just format it i think. not sure though.
I have hdd from YLOD with old update from 2013 update phat ps3. bought another phat ps3 with 4.80 update. how can I swap my old ps3 hdd to current ps3?
with your video I was able to do something I've been wanting to do for a long time
I was able to cage my 500gb HDD to a 1t SSD thank you so much
Great tutorial, upgraded to a 1tb ssd fine but had a very slight issue after the restart. Controller turns on system but when it gets to the user selection screen the controller lights would constantly flash and not connect. I found a fix, turn the power off at the wall on the user selection screen. When I booted it back up the console complained about an improper shutdown, scanned for errors and when it came back on the controller now works fine from turning the console on.
All went well, thanks for the tutorial!!🤩 I did it with a Slim CFW 4.91 latest Evilnat CEX (activate first QA Flag, and debug settings) 👏👏👏
to get debug settings i have ti activate qa flag?
@@krisskashin CEX yes, that way you can activate debug settings.
@@luqui89 I activated qa flag but when i do buttoj combo it doesnt show up
@@krisskash you have to do the combo (L1+L2+R1+R2+DOWN+L3) when you are in network settings.
@@luqui89 yea that's what im trying
White version PS3 is beautyful
Hell yeah it is......might buy another PS3 and hack it using Hen this time
@@dablaccaiyan9152 hen sucks
@@nailozaz7596 how? cfw causes so many godamn errors
@@59spadesofalife52 get on dex lmfao
@@PraiseGod671 been on dex since I hacked it
If the option wasn’t in your settings and your on dex go to rebut toolbox (install it if you don’t have it) go to debug menu type and select CEX QA and then the option should be in your debug settings make sure your second hdd is formatted to fat32 before you transfer worked perfectly for me first try thank you!
you have any idea why it still wouldn't be working? my drive has been formatted to fat32, but every time I try the ps3 says build error and then asks to format the drive which ive done 2 times now
worked like a charm , 1tb sandisk SSD plus, latest REBUG ! THX !!!!!!!!
Why SSD you paid more money for no reason. The PS3 only has a SATA 1 controller. A SSD is SATA 3. So basically you are completely bottlenecking the SSD (you are getting the same speeds as the HDD)
@@User_1795 i know, but i have plenty of ssd around and well, the ps3 is moved a lot because the kids watch plenty of blurays . no moving parts no fear of headcrash
Thanks. I didn't even know this utility existed. I have done multiple hdd swaps and this was the easiest. Yesterday I upgraded 2 ps3 slims to ITB with this method.
Hey did ur hdd space remain the same or expanded?
@@OmgTheyKilledKenny101 expanded up to 1tb.
@@realwelder3529 thank you
Hello, after the HDD copying process is completed, is the data in the first HDD to which we copied the data deleted at the end of the process, or does it remain intact so that we can use it as a backup in the future?
@@FratKavakl-ru2jf it formats the original drive as part of the process, unfortunately.
Thanks, this worked perfectly. It took about 3-4 hours too transfer around 110gb of files too my new 1tb Hard Drive.
For anyone that gets a "Rebuild Error/Must format". I ending up selecting format. It keeps the CFW but deletes save data and installed pks/games.
Thank you for the great informative video ,. It works and is simple upgraded 160GB to 500GB PS3 cfw. Will easy upgrade to 1TB with no worries , thanks a 1,000000.
did you reinstall the cfw after you installed your new hdd?
I was happy that I didn't have much on my PS3 when I did this, it only took 2 hours to transfer everything
I have rebug lite 4.86.1 CEX and it worked perfect! i just enabled the debug settings under the network options because it was hidden with this combination (L1+R1+L2+R2+L3+Down arrow on keypad you should also have enabled Qa flag in the rebug toolbox menu or else it wont work) then i followed the procedure and everything went as shown on the video! thanks ModzLink :) , i also believe that if you get errors on the procedure then you propably have damaged hard disk (main or the exchange one) bad sectors or weak sectors or transfer errors issues , just before you start check your drives with Hdsentinel and do a short self test just for sure :D
QA flag is enabled for me and i cant get debug settings to appear
Thanks!
@@CY-187 try with different controller :P
hey i downloaded hdsentinel and the tests ran fine. I've done debug hdd utility twice already and keep coming up with "an error occurred during the copy operation 8001000b" right before the hdd copy finishes on the PS3. It would be 99% and the error pops up. Any tips?
Thank you! I got a error about 10% in the first time I tried but second time went through great:)
i don't have debug for HDD Exchange utility in my debug settings
it works perfectly, with cfw, i had to rebuild from safe mode, but that was it
Hidden Gems how do you do that
@@Thenormalguy_real_one you just long press the power button for 10 seconds and then again you press it for awhile. There are videos online i recommend you look on RUclips how to turn on ps3 on safe mode there is many videos
Hidden Gems okay thank you
I need to find out how to store the updates for iso based games on a NTFS flash drive I can put the game on the drive but the update is put into internal storage and my PS3 has flash memory so you can see the issue there
i wish i have watched this video before upgrade my hdd
i just brick my ps3 😩😩
Honstly I find using this method faster than the normal backup, reinstall os and restore thing.
I found this video's method the most detailed and simpliest way to upgrade the HDD of my PS3, so I've ordered a Seagate FireCuda SSHD 1TB drive and a SATA/USB adapter according to the video.
I had Rebug CFW 4.81.2 REX on my system and I couldn't find the Debug for HDD Exchange Utility for the first sight... After some research I figured I have to switch the Debug Menu type to CEX to make it available, so I was good to go, but after 2 hours of copying i've got the "error occurred during the copy operation (800100B)" message, so I've formatted the drive on my pc to FAT32 and tried again...same results, I tried it again thinking it might have been just some reading/writing error, but no luck after another 2 hours.
Then I just switched to 4.81.2 D-REX firmware following the instuctions of another modzlink video, but the same error occurred during the copying progress to the new drive.
So now I'm on 4.81.2 D-REX and I removed some stuff of the already small 120 GB initial hard drive to make it copy only like 69GB total, surprisingly the processing still took 2 hours and the result was the same error emssage.
In the end I just used the backup utility with a thumb drive which took only about 30 minutes, swapped the drives and I was ready to install the CFW on the new drive, but...
by some miracle the Rebug booted on and seems like all the 69 GB has been copied to the new hard drive, I have everything I had before with additional 880 GB space. Also I didn't have that Rebuilding data on the disk screen at all, nor the exchange completed or restart the system message, after the hard drive swap it looked like everything is great, no message indicating the hard drive has changed.
However after I've restarted the console a new message came up about corrupted files and telling me the storage must be formatted and all data will be deleted, so I still had to restore my backup from the thumbdrive.
geez what an unfortunate journey you had.
Im looking forward to doing this but I hope I dont run into this
Great 👍 finally got around to upgrading the drive. Perfect 🤩
Hello, after the HDD copying process is completed, is the data in the first HDD to which we copied the data deleted at the end of the process, or does it remain intact so that we can use it as a backup in the future?
much needed utility for jailbroken sets. PS3 discs are bluray which makes the game sizes huge. 250gb just doesn't cut it. And the drive is encrypted making cloning tools like Clonezilla and Macrium useless.
Thanks a lot for making life simple for us. Great tutorial 👌
Hey Modzlink, when you run the Debug for HDD Exchange Utility data transfer, is the PS3 on CEX or DEX?
Great tutorial!
CEX QA in the rebug settings makes the Debug HDD setting appear.
@@ReviewArchiveUSA420 thank you! i was wondering where that setting was.
@@EnTeeSea No problem
@@ReviewArchiveUSA420 Thanks - your comment really saved me a lot of time as I was using DEX
Okay ... since soooo many people have been reporting problems on a hard drive exchange on a 4.81.2 Rebug CFW ... I have now successfully exchanged 3 hard drives on this firmware. So I would like to post the steps I go through... If ModzLink doesn't care that is:
Note: each of these exchanges was performed on ReBug CFW 4.81.2 D-REX... if you're on straight Rebug CEX 4.81.2 I recommend updating to the DRex as you are able to change the target ID from CEX and DEX on the DRex version found on Rebugs website. I also used a radio shack branded USB 3.0 to Sata cable plugged directly into the new hard drive as seen on this video. The hard drive I chose for all 3 was Seagate 1TB SATA Laptop Hard drive powered by Barracuda(w/e the fk that is).. it was like 70$.. the adapter probably doesn't matter as to which one you use.
I turn on the PS3 and I go to Rebug toolbox to make sure that QA Toggle is enabled. I then go past system information all the way to the right to the last menu subheading and then all the way down to the very last option which should be "change ps3ID" and I select 84 CEX... I exit back to the xmb menu.
Then the procedure i have been using is pretty much the same as seen here in the video.. you go to debug settings under settings in the xmb menu as shown and then to HDD exchange. Follow the steps to physically replace the drive as shown in the video. I would however let the PS3 cool down for about an hour after copying the drive over before exchanging the hard drive. I then plug everything back up and turn it on.. it rebuilds the data and gets stuck at about 70% and then goes through, again, shown in this video.. but have patience it will go through. It will then restart and the first time your profiles load it will be a little laggy but it will go away once you go into your profiles and restart.. wallah.. everything is new again. Huge shoutout to ModzLink for this video and the inspiration to help people who were having probs on 4.81.2 Rebug..
+CDubs HasIt thanks for providing useful info
Grey Skies if it doesn't show up I would recommend updating to the newest drex. But that could also fuck up all your other stuff ...so you can do it a different way which may be easier for you.
Go to back up utility and make a backup to a USB external hard drive.
Synchronize trophies with the server. If you care about this.
Remove and exchange internal hard drive.
Keep the Internet disabled beyond this point.
Make sure you have your current custom firmware or higher on a USB drive in the right hand USB socket. Plug in your controller to the other socket.
Boot your PS3 into restore/recovery/safe mode. Not hard to do. Many tutorials on how to do this. A matter of pressing the power button a number of times.
Hit restore. It'll want to install firmware. Make sure you install firmware from the USB drive with your firmware on it. Follow on screen instructions until you get back to main PS3/Rebug menu, plug your external drive back into the right hand USB socket and go to settings and back to back up settings. Hit restore from back up and select your back up. It'll do its thing and restart. And there ya go.
But you do need to make absolutely sure QA is toggled either way. You can do this in Rebug toolbox.
Is it very important to swith to 84 CEX if currently in DEX?
shukran bro
@@captawesome11 I'm new to ps3 jailbreaks and ps3 modding in general, my console came with a 100gb internal hdd, which is garbage, i'm in the process of upgrading to a 500 as its all i have lyinga round. What i have done so far is in RebugToolbox turn Q/A toggle to enable, change ps3ID to CEX 84, then somewhere else in rebug toolbox there was a option called DebugMenu type, i just changed it to CEX also, and now the Debug HDD Utility Exchange shows up, right now its cloning to the new drive. Hopefully i wont experience any errors...
I have the latest rebug d-Rex installed and I can not find the HD exchange utility is it only in the older rebugs?
The Video, I have looking for. Thank you, I will try it tomorrow. chance my 80gb HDD to 1TB SSD 😊
Perfect!! great video very easy to follow!
you're the best modzlink
Im going to try this, this weekend seems simple will try a 1TB
Perfect tutorial, this helped me very quickly.
Hello, after the HDD copying process is completed, is the data in the first HDD to which we copied the data deleted at the end of the process, or does it remain intact so that we can use it as a backup in the future?
Great video just what I was looking for
my debug for hdd exchange was not there at 1st and im on cfw rebug cex 4.81.2 all i did was go to rebug tool book, xmb to debug then go back to xmb then debug settings and there it is .
I'm new to ps3 jailbreaks and ps3 modding in general, my console came with a 100gb internal hdd, which is garbage, i'm in the process of upgrading to a 500 as its all i have lyinga round. What i have done so far is in RebugToolbox turn Q/A toggle to enable, change ps3ID to CEX 84, then somewhere else in rebug toolbox there was a option called DebugMenu type, i just changed it to CEX also, and now the Debug HDD Utility Exchange shows up, right now its cloning to the new drive. Hopefully i wont experience any errors...
People dont do this. You're risking a YLOD here and it takes a very long time! Just use HDClone to create a bit-by-bit copy of your ps3 hdd to a bigger (possibly faster) hdd.
How could it cause YLOD?
Don't fool people.
HD clone is on PS3 or PC?
Thanks works for me great video!
Are you sure this method isn't exclusive to same-sized HDD?
Source: www.reddit.com/r/ps3homebrew/wiki/new_hdd
Edit: just tested and he is right, worked like a charm. Waaay easier than the wiki page I posted, but It is still worth giving it a read.
So i can upgrade to a larger SSD?
@@YoungCatracho I really don't remember man, sorry
I don't have that setting in my debug settings I am on 4.78 kernel CEX target DEX
Don’t have that setting either, can’t find any solutions to it unfortunately.
worked like a charm brotha
I also got a black screen, it doesn't even start to copy stuff to the new HDD, can you please help us? :)
Should I downgrade to 3.55 as you explain in your 4.75.1 video? I am currently on 4.78.1
Thanks in advance!
Very informative video!
Can I have a question?
The process is same with old phat model - NAND system?
And before transfer hdd need to be formated at any system like fat32,ntsc....?
Going to upgrade mine, did you find the answer for this?
@@FruitVideos yes.. Process is same
I done it
@@michaeljijus980 Thanks, so I formatted to ntfs, I plan to leave it doing it's thing over night tonight.
I'm getting the same fault as KyleCFW. The PS3 did not reboot to ''Copying'' and I've got no signal on the tv? Though its still running. I had to shut everything down and restart my ps3 in safe mode. Luckily its still working ok.
for hard drive 1tb what are the features ?, measurements are 2.5' 9.5 mm ? sata 3 is compatible ? 7200 is good? , how much cashe memory ?, hdd usb 3.0 is compatible to put it internally? the best brands? thanks anyway
hi, just to speed things up a bit, can we remove both hard drives and use the sata station to do a direct copy and paste with the help using a PC ?
so i have a Fat CFW evilnat 4.91.2 model, it has a 60 gb disk and i want to upgrade it, the HDD has 0 stuff in it besides a virtual memory card for a ps1 game, i have read that replacing the HDD wont delete the CFW but, do i must backup the original drive? it doesnt have anything, is there something that it is supposed to backup thats completely necessary for a correct upgrade? its a NAND system
can i just not get my ofw hard drive and stick it in my jb ps3?
i tried to upgrade from 320 gb to 1 TB and when I try to runn the process it says that there is not enough space on the disk... what should i Do?
Delete something that you don't care about 🤣
gotta love when you're trying to upgrade to an ssd with less space than the hard drive and it says there isnt enough space
Don't upgrade to SSD. Your just paying more money for no reason. The PS3 is SATA 1. A SSD is SATA 3. You are completely bottlenecking the SSD at 150mb/s. You can get a 1TB HDD for like as low as $20-$35
@@User_1795 the superslim is sata 2. 300mbps. Worth upgrading
@@thennekcdcdthennek6417 I didn't know that... Interesting.
Very helpful turtorial
Where did you get that beautiful white shell man? Is that a Japan console?
You can get one here: amzn.to/2AkZGax
awesome bro love the vid
Glad it helped you out. You may also want to consider trying out the brave web browser every download helps the channel and it's much better for your privacy.
brave.com/mod553
my 320GB HDD is so fkin slow, i need to upgrade it to 500GB SSHD
You guys just swap the new Hdd card and boot the ps3 in safe MOde , and choose format ps3 , and thats all , the ps3 will format the new Hdd card , and u can choose to update if u want to but be careful if you have a JAILBREAK PS3 !
this with ps3 is freaking awsome
I get error occured during copy operation, about half way the the transfe, happened twice now, anyone know what it is?
Hey, I had a question about when copying the to the new hard drive. I keep getting an error around 93%. It says "An error occurred during the copying operation." (02005120) Thanks.
Did u ever figure this out mate? Mine gets a error a 93% too
Do I need to format the new drive first before I copy over data from the new drive or does the hdd exchange utility do it automatically?
Hey there I was checking out your videos .. I wanted to ask about JB PS3's is the same as an XBox 360 JTAG"d meaning able to do the same things ?? If so i was checking out your website consoles for sale. Im very interested do I have an option of mailing you my unit and having it Mod'd ?
when will you have more 3.55 ofws available ? and I purchased a cid from your website
I keep getting error code during copying process
I can't imagine how long copying a 1TB drive would take.
Just use clonezilla at that point.
17h did it take for a 1tb to a 1tb ssd
@@ModzLink I know this is old, but can you just use cloning software to do this?
Modzlink can I change my old hardrive and put it on my new PS3
I have a problem. I booted up my ps3 and I hooked up an external hdd and my ps3 froze up. Now it keeps wanting to fix corrupted data over and over again. Went into safe mode and still didn't fix it. I've got another hdd coming this weekend and was wondering if reinstalling my CFW after installing hdd would that automatically format the hdd to fat32 or do I have to do it manually? Or would that even fix my problem? Would I have to restore my ps3 and lose CFW?
Great. Can i swap Jailbroked HDD by regular one and just use whenever i'll need it? Will JB HDD stil functional after swap?
I have given PS3 Slim with some games installed on it already. Firmware version shows 4.76. So i'm assuming it's a moded PS3 but i couldn't find any CF or MultiMan installed on it. How i know you can't insall games on HDD with Official Firmware.
Any idea? Thanks.
Cant
An error occured during the copy operation (8001002F)
ı did all the steps same way. when ı try to start ps3 new hdd it give error. an error occured during the rebuild operation.the system storage must be formatted. all data on the system will be deleted during formatting. do you want format? please help me what can ı do
I have the same issue, +ModzLink are you around to give us a hand with this please?
So what I did was a mix between the following:
To add context: I upgraded from 160Gb HDD to 1TB 7200RPM HDD on Rebug 4.81 DEX.
- community.eu.playstation.com/t5/PS3-Support/Error-at-70-of-rebuild-process-when-adding-1tb-hdd-to-12gb-super/td-p/17599604
And,
-www.ps3hax.net/showthread.php?t=99082
The steps:
1) Enter Safe mode: "(Hold down the power button on the console waiting for the first beep, then keep it depressed until the console switches off completely. Remove your finger from the button.
Then, hold down again, wait 5(ish) seconds for the console to beep, then wait 2 further seconds for two successive beeps. After the second beep, take your finger off the power button)"
2) Select first option 3 and then 4.
Quoting Playerkp420: "Option 3. Restore File System and Option 4. Rebuild Database, will not format the HDD. But after choosing Option 3. it is normal for the PS3 to say something is corrupt then restore the file system. Even if nothing is corrupt. It does the thing like when the ps3 wasn't shut off correctly, but nothing should get formatted. If you cancel it after starting though, it will probably want u to format."
However when I go to check the free space it still says the same amount as on the previous HDD, 122GB/931GB, and it should be something like 893GB/931GB, what can I do for it to be detected properly?
To fix the incorrect free space shown which was apparently because it had all of its space unallocated and when restoring it only allocated 160gb as per previous HDD since it couldn't perform the rebuild successfully, I formatted the HDD, it kept the CFW and it now shows the correct amount of space however the data was deleted. To recover the data I restored it from a backup I did as a failsafe. So I didn't have to reinstall CFW with pendrive but had to follow some steps from this other guide:
ruclips.net/video/HyjXR9GMjfw/видео.html
Now it does say 828GB/931GB which is what is expected from a 1TB HDD.
For the trophies I backed up the whole "dev_hdd0\home" which includes the "Trophy" folder via FTP and sent it back to the new HDD the same way.
@@nicolasbuitrago8484 hey can you help me,? I installed a 500gb drive and it says only 20gb available obviously it’s unallocated how do I format it without losing my cfw?
Still works in 2024!
Hello, after the HDD copying process is completed, is the data in the first HDD to which we copied the data deleted at the end of the process, or does it remain intact so that we can use it as a backup in the future?
I have 4 ps3 which 2 are jailbroken already with many games on each. My question is that my old ps3 launch edition I want to install 500gb drives and I would like to copy just the games, but I do not want to do it from the bluray unit. Can I just copy from one drive to another?
I did this upgrading to 1 TB from 320GB. I'm on rebug 4.84 cfw and cloned it using the hdd tool. I popped the new drive in and it says I only have 50 GB available outta 960 GB. Can you help me out with how to make the extra space useable?
Did u find a solution
HI, can you tell me why i try to Upgrade my Jail broken PS 3 Hard Drive i did fallow the way you show but after rebuilding data on the Hard Drive about 70% got error and corrupted what happen with ?
good job i did that too like you did it work good
and soon i will shipping my ps3 to you to unbrick ok
i have your website will let you know when :)
Hello, after the HDD copying process is completed, is the data in the first HDD to which we copied the data deleted at the end of the process, or does it remain intact so that we can use it as a backup in the future?
If I dont want too keep anything from old hdd, could I just insert the new hdd? Would I lose the cfw?
+Ion Ostafi no just reinstall your current firmware and use rebug toolbox to enable the qa flags
+Ion Ostafi no just reinstall your current firmware and use rebug toolbox to enable the qa flags
@@ModzLink rebug toolbox. Where do you get that?
worked perfectly!
After the process is finished and I plug in the new hard drive I get "an error has occurred during the rebuild process" and have to format it and try again. This has happened twice now, how do I fix this? I'm using PS3Hen instead of Rebug if that's important.
am on rebug 4.84 REX
tried this... everything went well until it reaches 93% while copying and then an error occurs. did it twice same error at 93% any help please thanks.
Your new hard drive could have bad sectors had the same issue until i changed the hdd
LOL in your video you have a ANKER sata adapter but your link in description leads to a UNITEK sata adapter THAT COST TWICE AS MUCH WITH SAME FEATURES
hey can you please upload a video of how to clone a ps3 hdd with Linux?
Awesome 👍
im on rebug firmware 4.75. and can not find "DEBUG FOR HDD EXCHANGE UTILITY"
HELP!
Me too
I get a error 8001002b every time close to the end of it and its annoying because it take like 4 or 5 hours to even get that far
I can replace 320 gb (slim ofw) to my ps3 fat 40 gb (cfw)?
im on rebug firmware 4.75.3 and can not find "DEBUG FOR HDD EXCHANGE UTILITY"
any help guys?
i have done this tutorial, just not sure if i am on CEX or DREX but after i used HDD Exchange Utility, the New Harddrive shows wrong information of available space...btw my OLD hdd is 160gb and upgrading to 250gb... thanks i you could help me
Can you do a giveaway soon?
I have a HDD external dock with 2 slots. Can i just clone my internal ps3 HDD into a higher capacity one? Would that work and have the extra space visible to the ps3?
So i did clone the hdd to a bigger one but the free space is the same as the old one :( What the hell :((((
The data on the ps3 HDD is encrypted and will clone it exactly the same. External cloning dock is only good for replacing HDD with 1 of the same size
I don't gave debug setting with Evilnat, what do I do?
Once I finished upgrading the HDD, I didnt get the option or anything saying "rebuilding database" and its still showing as 500mb free (Which is wrong, I upgraded from a 40GB because it was full) any ideas?
This guy is best much
I have windows PC, 2 usb 3.0 Hdd enclosure, and partedmagic usb flashdrive. Can I just use them to clone to larger hdd and then resize the partition?
Right Now I Have PS3 Slim And I Want To Upgrade It To 500gb From 111gb and I Didnt Buy The Usb To Adapter Thing Yet But Im Not Able To Find Debug For HDD Exchange Utility, I Am On Rebug 4.78, Please Help Me
Nevermind, I Was Messing Around With Rebug Toolbox And All I Had To Do Was Set The Debug Settings To Cex QA
Tx...now I need games to fill it!
can u send me the link of the website you download your games from pls ?
does the drive need to be fat32 or ntfs is fine? will it convert it by itself?
Also curious about this
Modzlink could you please make a video on how to install games without actually installing them through the game help and If I used my 1tb Hargrove from my laptop will that work on my cfw ps3
to backup games without you owning the games is piracy and modzlink doesnt promote that in any way. and i think installing a laptop hardrive should work the same way just format it i think. not sure though.
Can i just install a new HD instead of the copying?Also with an new update.
Ok, but I'm still having problems finding debug settings on Rebug 4.82! Plz, anyone help?
me too!!
Did you enable rebug as debug settings
It’s works no problem
I have hdd from YLOD with old update from 2013 update phat ps3. bought another phat ps3 with 4.80 update. how can I swap my old ps3 hdd to current ps3?
How long does it take to load up after you see the rebug sign?
hey I have a jailbroken ps3 but I don't like the shell his much would it cost to send it to you and you customize the shell