Hi there, you saved me pulling my hair out. I got adjusting all the levels and didn't make sense. Thanks for getting me to reset and enter the set temperature with a quick push! Appreciated
Your explanation and the way you show how to connect circuit in your every video is OUTSTANDING AND INCREDIBLE,,,,,,,,,, Thank you very much for making the helping video 😊😊😊😊😊😊😀😀😀😀😄😄😄😄😇😇😇🤗🤗🤗
hi bro, you are the only one who explain in simple steps and in english. Ruquest you to kindly make one more video how to connect bulb (for incubator purpose) and with ac power supply.
Bro can you please suggest me that by using this kit can i control cooling tower fan by sensing water temperature..... Hope u'll give reply to my question thank u...
Thanks, I built a thermal electric refrigerator from a Peltier cooler and a Styrofoam box. I've got one of these thermostats included on it . I forgot how to use it.
I have a question, if I switch off the 12 volt adapter power connection after setting up the temperature adjustment. Then when once again switch on the power the temperature setting once again required for adjust or not? Please reply.
@KSY CREATIONS. Nice video and explainaton. I understood this module because of u. I want to use this in my celing fan .will the power supply be same or different.pls help me
can i use this module in audio power amplifier heat sink stage? if yes then when i switch off the amplifier each time the relay module get switched off so how it reminds its temperature in memory ?
I have mini incubator temp with Iam setting is not sfixing up -changes by itself after few seconds& work button some time s works off by itself what to do
I have a question. I have one of these that are very similar except the controll board is in a black box to protect. There are still 4 connectors-- but on the back and it goes like this from left to right: + - S1 S2. I assume S1 is like KO and S2 is like K1??? So I tried to figure out the connections but it fried the switch. Ordered a new one but I'm still confused. It is for a fan.
Thanks great project easy steps to follow. I just completed a HP 12V 750W power supply looking for something to fill the day this was perfect. Can you point me to the data as to how many 12V appurtenances are permitted ganged from the sensor??
Is there a part number for the entire device, or just a kit. Also, can it be adjusted from 68 C to 110 C for automatic transmission cooler with thermistor outside on piping? Thanks. I would like to get!
Bro, Can I connect a 220v bulb to the fan connection and control both the bulb and the fan at the same time? Please answer if I can do it or show me another way as to how we can do it. I need this setup for my egg incubator.
hiiii, i don't have any idea how to connect light and fan at the same time, but we can connect 220v bulb to relay, please follow the link ruclips.net/video/avBkPuIByZI/видео.html
How to connect cooling fan in STC 3028 controller in the position of humidity port. I want when increase the value of humidity (which is set by me) the fan should be on until the humidity value down
Very nice and helpful video.. But I have a question. If i connect a ac bulb or heater with this connection will the dc fan will burn out?? I mean what will i have to do to to run the heater or bulb beside this cooling system? Please reply.
I need little expert help. My AirConditioner outside has a heat sensor when outside temperature is above 35 C it cools alot below 35C everything is fine as per its compressors working . Is there any way i can fix the temperature of sensor no matter how hot outside it gives the inside system temperature of 34C fixed any way possible ?
Is it possible to Power the thermostat with 12v 606 transformer?? Is there any problem.I need thermostat to get 37.5v.Also I need to connect cooling fan.
this module works on 12v and output from the module is 12v, if overvoltage is connected module may damage. if you want 37.5v output, here is another way, ruclips.net/video/avBkPuIByZI/видео.html follow the video, in this video, I have used 220v, but instead of 220v you can connect 37.5v
Hi, as led is on but you cannot see anything on display, I think there is some problem in the module, better check once again all wires and connections.
@@KSYCREATIONS-sandeep-k hi thanks for your explanation.. Means using single power adaptor to activate fan and relay in one time? I found one video showing that, they use separate power adaptor.. One for fan and the other one for relay. What are different between that?
Hello Sir, Is it possible to connect incubator egg tray turner motor (220V / 2.5 r/min) with time setting duration 4hrs once (but my relay contains up to P6)
Fiiiiinalllllyyyy! Someone who's video actually shows how to connect all the positive and negative wires!!! Thanks!
Thank you.
Yes, thank you so much for that one. Do you have one for the module with two displays?
@@brianwheeler1139 I use a 2 display unit. same hookup, works great.
Thanks for this! So much simpler than the complicated wiring diagrams I've found
Holy crap!!! After weeks of searching how to wire this up. You have offered the best and clearest instructions. Thank you!! Thank you very much!!!
welcome pre10der.......
Is same way , can I connect a bulb with module ??@@KSYCREATIONS-sandeep-k
@@motosurfers6946 hi, yes you can connect light as well in same way.
@@KSYCREATIONS-sandeep-k Thank You very much sir , you texted me back , have a great life ahead
indians are the best teachers thanks buddy
Hi there, you saved me pulling my hair out.
I got adjusting all the levels and didn't make sense.
Thanks for getting me to reset and enter the set temperature with a quick push! Appreciated
Your explanation and the way you show how to connect circuit in your every video is OUTSTANDING AND INCREDIBLE,,,,,,,,,, Thank you very much for making the helping video 😊😊😊😊😊😊😀😀😀😀😄😄😄😄😇😇😇🤗🤗🤗
does it work only 12 v battery or even work with 9 v battery
Thank you brother, after hours of trying.....only yours worked
Great video. I struggled all day to get my 12v working, now I know why it wouldn't work. Many sincere thanks.
thank you...........
hi bro, you are the only one who explain in simple steps and in english.
Ruquest you to kindly make one more video how to connect bulb (for incubator purpose) and with ac power supply.
hiii, thank you, I will definitely make another video...
Omg!!I thought it was an Big deal to make it..but u made it very simple..thq bro fr ur info!!
Please answer me set incubator in fan and bulb
Very easy and clear way of demonstrations 👍⭐⭐⭐⭐⭐
Great Video, Saved my skin as to how to wire the switch up.!!
Thank you! Absolutely no help elsewhere to figure out how these things are supposed to be wired!
Very good demo.i m your student.from Pakistan 😘
Brilliant and much appreciated for the concise demonstration Sandeep.
Thank you for a great, informative video on the W1209 type modules. Just what I needed!
😉👍
Simple and clear video good bro
Thank you for tutorial man!👍
Thanks, that's exactly what I was looking for
Bro can you please suggest me that by using this kit can i control cooling tower fan by sensing water temperature..... Hope u'll give reply to my question thank u...
Thank you sandeep. You're my life saver.
🤝👍
Thanks, I built a thermal electric refrigerator from a Peltier cooler and a Styrofoam box. I've got one of these thermostats included on it . I forgot how to use it.
Thank you, I've understand all.... the best video guide!!!!!!
Yeah really useful video was thinking what is this thermostat is now I got this
Thank you for your excellent detailed toturial !!!
I have a question, if I switch off the 12 volt adapter power connection after setting up the temperature adjustment. Then when once again switch on the power the temperature setting once again required for adjust or not? Please reply.
Hi, no need to adjust again, once you set the tempurature, module will store the settings.
@@KSYCREATIONS-sandeep-k thanks
@KSY CREATIONS. Nice video and explainaton. I understood this module because of u. I want to use this in my celing fan .will the power supply be same or different.pls help me
❤❤nice brother
muchísimas gracias por tu explicación, clara precisa y concisa
Қазақстаннан жалынды сəлем! Өзіме керекті мəліметті алдым. Рахмет ! 👍
😀👍
Привет. Если нужно подключить температурный регулятор xh-w3001 к реле, то на моем канале есть видео
Very nice video sir, thank you.🤩🤩😍😍
can i use this module in audio power amplifier heat sink stage? if yes then when i switch off the amplifier each time the relay module get switched off so how it reminds its temperature in memory ?
Hi, once you set the tempurature, it will be saved. No need to set each time.
@@KSYCREATIONS-sandeep-k ok, ty
sandeep,how do i use this w1209 with ramps ,or do i hv to use it as independent one
you are best brooo
Hiii, yours pleasure.....👍
Nice
Brother I want to run fan when temp below set point?
Then setting will be what
Sir Can i run 3, 12 volt cpu fan in parellel with this temperature cotroller
Thank you soo much for this review
THANKS FOR THE VIDEO MY FRIEND .....VERY HELPFUL
Do you know how to connect a 12v DC fan with Selec TC303 temperature controller??
Super explained bro
Just what I was looking for! Thanks.!
hiiiiii, your pleasure................
Thank you. Very well explained.
Hey Sandeep can you suggest a case for the same
I have mini incubator temp with Iam setting is not sfixing up -changes by itself after few seconds& work button some time s works off by itself what to do
Hi, there might be any problem with the module.........
@@KSYCREATIONS-sandeep-k
Thankyou Sir,Is that repairable or should I buy new one
No it's not repairable.
Awesome, thank you very much.
Very helpful, thank you so much!
Thank you very much! This was very clearly exlpained and very useful.
Thank you ........
Excellent. Also let's know how to connect the bulb with fan to use in incubator. Thanks.
I have a question. I have one of these that are very similar except the controll board is in a black box to protect. There are still 4 connectors-- but on the back and it goes like this from left to right:
+ - S1 S2.
I assume S1 is like KO and S2 is like K1???
So I tried to figure out the connections but it fried the switch. Ordered a new one but I'm still confused. It is for a fan.
Can I connect 4 fans and 2 cooling pads at a time ?
Woow nice instructions..thank alot bro...bro would you please show us how to connect thermometer ; electric bulds with Ac fan at the same time
Thank you. I know how these things work :)
Can we connect both dc fan and bulb for incubator pls reply
Hi, we can connect only 1, either light or fan.
If we connect both fan and light then what is going to happen and can u make video on how to make incubator pls
If we connect both together, fan and light will work together, on and off same time.
Sir which size dc fan should i use in incubator ( in Inches)
can be use this w1209 in usa ?
Hiii, Yes you can use, it's available In usa
How can I connect electric bulb in the same control for heating in an egg incubator, ?
Thanks great project easy steps to follow. I just completed a HP 12V 750W power supply looking for something to fill the day this was perfect.
Can you point me to the data as to how many 12V appurtenances are permitted ganged from the sensor??
hey can i use this on my bike .. i just purchased it
Mantap... Im from Indonesia
Thank you very helpful 🙏🏻
Will this work for a heating element, or will it draw too much voltage from the thermal-relay setup and make it shut off due to undervoltage?
I guess I could just try. :D
Awesome very, very informative. Thank you so much for this.
Can i use this thermostat to turn on and off a 12v Peltier cooler instead of a fan?
Hiiii, you can use.....
@@KSYCREATIONS-sandeep-k awesome thank you and great video! 👍
@KSY CREATIONS can i get DC and AC output same time with w1209?
Thenkyou sandeep sar
Is there a part number for the entire device, or just a kit. Also, can it be adjusted from 68 C to 110 C for automatic transmission cooler with thermistor outside on piping? Thanks. I would like to get!
thank you for your information
Can I put two sixty watts bulb in the incubator
Bro, Can I connect a 220v bulb to the fan connection and control both the bulb and the fan at the same time? Please answer if I can do it or show me another way as to how we can do it. I need this setup for my egg incubator.
hiiii, i don't have any idea how to connect light and fan at the same time, but we can connect 220v bulb to relay, please follow the link ruclips.net/video/avBkPuIByZI/видео.html
@@KSYCREATIONS-sandeep-k OK Bro, Thank you. FYI, the I button video is not the video you mentioned about in this video.
What type of wire do you use? What thickness?
Hi, you can use normal wires, it doesn't required specific gauge wires, as it is running on 12v
Excellent video
How to connect cooling fan in STC 3028 controller in the position of humidity port. I want when increase the value of humidity (which is set by me) the fan should be on until the humidity value down
Can the thermostat sensor wire be extended If so will the accuracy change ?
Perfect video!! Thanks Well explain!
thank you. can I use my 5v usb fan on this thermostat?
Is it possible to increase the length of a sensitive wire with a regular copper wire?
Very nice and helpful video.. But I have a question. If i connect a ac bulb or heater with this connection will the dc fan will burn out?? I mean what will i have to do to to run the heater or bulb beside this cooling system? Please reply.
Tnx sir..you are the answer of my confusion..
What is the use of P1 to P7.. appreciated if you explain each setting just like this way..
Awesome video in great detail, thanks!
Hii, thank you..
Sir, can I use 12 volt 2 amp transformer
Hiii, if the transformer produce dc power u can use , this module works on dc power.
Sir how many AMP we are use
I need little expert help.
My AirConditioner outside has a heat sensor when outside temperature is above 35 C it cools alot below 35C everything is fine as per its compressors working .
Is there any way i can fix the temperature of sensor no matter how hot outside it gives the inside system temperature of 34C fixed any way possible ?
hiii, I am sorry to say that it is not possible because everything is controlled by a microprocessor, it runs as it is programmed.
Thank you so much bro ❤
Hello, what kind adapter i need? I know 12DCV but aper? 0,5A, 1A, 5A or 10A, how much A i need for 3 PC fan arctic F12? Thanks
Hi, you can use 1 amp adapter.
@@KSYCREATIONS-sandeep-k Thank you !
can i use mobile charger....? hope u will reply....
Hi, module works on 12v, module cannot be operated on mobile charger, as mobile charger is around 5v.
@@KSYCREATIONS-sandeep-k u got a new subscriber........ lv u
Hello sir will you tell me minimum n maximum Ahm for this module
Hi, maximum of 240V AC at 5A or 14V DC at 10A.
@@KSYCREATIONS-sandeep-k thanks a lot sir
Kya mein 20volt laptop ka charge se work karega?
System on and off at 2 minute gap.. Is it good or fast cut off for system?
Great bro...thanks..
you have connected a fan can we connect a Bulb with it??? Because a 100 watt bulb needs more power.. kindly reply and guide
hiii, yes we can connect a 100 watts bulb to this module, but the connection will slightly different ....
@@KSYCREATIONS-sandeep-k then we shall not be able to give it power supply with a charger.. what else can we use??
ruclips.net/video/avBkPuIByZI/видео.html this might be useful for you
Thanks for the video, help me setup a pc fan!!
Very good video...
Hi Sandeep I have some doubts about some other module plz tell me how should I contact you
Is it possible to Power the thermostat with 12v 606 transformer?? Is there any problem.I need thermostat to get 37.5v.Also I need to connect cooling fan.
this module works on 12v and output from the module is 12v, if overvoltage is connected module may damage. if you want 37.5v output, here is another way, ruclips.net/video/avBkPuIByZI/видео.html follow the video, in this video, I have used 220v, but instead of 220v you can connect 37.5v
My module does not show anything on the display. The led is on when I supply 12volt 5amp thru input terminal. Any idea why is it so.
Hi, as led is on but you cannot see anything on display, I think there is some problem in the module, better check once again all wires and connections.
May i know what is main purpose to have jumpe line (white cable)?
Hiii, the main purpose to jump a wire is to activate the relay, without that relay won't receive power...
@@KSYCREATIONS-sandeep-k hi thanks for your explanation.. Means using single power adaptor to activate fan and relay in one time? I found one video showing that, they use separate power adaptor.. One for fan and the other one for relay. What are different between that?
Hai can you help?
@@syekhroyl5580 hiii, ya sure how can I help you ???
@@KSYCREATIONS-sandeep-k can you refer my question one day ago?
And can we connect a bulb to thermostat as how u arranged instead of that fan
Yes off course you can connect a 12v bulb in place of fan.
Brother, At 1:51, why do we need to connect k1 and 12v positvie using a small wire strip? what would happen if we don't connect it?
hiii, if we do not connect the wire, the relay will not activate...
Hello Sir,
Is it possible to connect incubator egg tray turner motor (220V / 2.5 r/min) with time setting duration 4hrs once (but my relay contains up to P6)
is possible to connect 2 Fans like this
Can i attach 5bulbs to this