I just want to say what everyone else here already mentioned, I watched ten videos and all of them good but felt like it was not enough to not doubt myself and go into the project with a little fear of messing up. Once I got to your video I clicked on it because of your awesome hair but then you started explaining the steps and I was hooked man. The detailed explanation, the camera angles, the re chalking of the things you already explained I came out knowing more out of your video than the ten others I had already watched. Thank you for doing us a great service and thank you for being awesome. You should definitely branch out to other social media sites if you aren’t already on them because you deserve followers and followers can definitely use a knowledgeable person like yourself to save some money in renovations or repairs. Thanks man and I appreciate the effort you put into the video.
@arielleon7236 Thank you for the kind words! Definitely one of my favorite comments of all time! Comments like these make all the work I put into these videos worth it. Good luck with your project!
Great job with your tutorial. Getting ready to install our first room. We had decided to go without the underlayment but changed our mind after watching this video.
You're a teacher ! Unlike any other videos I have watched so far on this subject. You explain the process so we learn while answering a viewer's possible questions . Special thanks to your videographer who did an awesome job to show the process explanatory. I truly appreciate it🙏
Excellent video! This guy is so good at what he does and not alone that but can express it in his videos. So precise and explicit that he makes the task of laying floors very doable to the DIY person. Well done to you, keep up the good work and thanks.
Best instructional floor video on yt. Explains everything and shows everything and explains why. Camera is clear and is on everything hes explaining Thank you. !!!!!
Spot on this, was installing a floor Tomorrow but not anymore, they are in a cold garage so will be bringing them in tomorrow and leaving them for a few days to adjust to their new environment, great tip, thank you!
I'm 71 and installing a vinyl plank flooring. I searched for many videos, and yours is the best. I have all the tools, except l have a plank cutter. I think I'll purchase the saw and a different heavier rubber mallet.
Thanks man! There are a good number of tips in here that really help, especially around the first few rows and adjustments before continuing on. Much appreciated!
@@TheCarpentryConsultant Thanks, much appreciated. I have a question already! In my excitement I put down rolled foam underlay in advance of the laminate arriving. I've since read that it should ideally be laid at a 90 degree angle to the direction of the laminate panels. I have laid it parallel - is this likely to cause issues? I still have plenty of time to amend if necessary.
@@pancakesgo7995 Good question, either way you lay the vapor barrier it still does it's job. Some people are adamant about one way or the other but honestly it can go either way.
Thanks for your comprehensive demonstration. As a newbie to floating timber flooring, I was really appreciative of all your very detailed instructions. Those tips make all the difference. To save time, money and anxiety, you REALLY don't want to have to learn these "on the job". Cheers from Australia!
Salute to you Sean. What a blessing you are for me with this video. Finally I'm able to follow thru on a dream of updating my floors. I live in an older home that I love. I'll be using a professional installer company.... prayerfully they will be as good as you. You've done a superb job in educating me....and I thank you. I'll be able to communicate with them and make sure they know that I know a little something. I won't feel like a novice....going into this venture blind. Again you are a blessing 🙌 for many. May God bless and shower you and yours with blessings....and the desires of your heart. You provide an awesome service. 😊❤
Man, I've been watching these vids left and right and by far this was the easiest to "get it"! Thanks! Me n my 14 n 15 yr old boys will be tackling their bedrooms and I will have them watch this vid as well! Thanks again!
@@TheCarpentryConsultant I have a question? If my hallway flooring is north and south should the bedroom be the same or can I go east n west in bedroom? Thanks again!
You spoke about laying a moisture barrier if the floor was uneven before laying the laminate flooring. Be aware and check the instructions in the flooring box, because so say not to use any barrier underneath as it can scrub the warranty. Its better to check the floor with a level (I like the three bubble with measurments on the side) and then use floor patch to level the subflooring before laying the laminate flooring. Your video was great and very helpful in putting down these wonderful floors!
Hi @renehorne5792 Yes, I did mention the vapor barrier detail as well as what to do if the floor has some dips in it. The vapor barrier I used is compatible with the flooring but, of course, you should always check the directions from the manufacturer before installing. Thanks for watching!
Whats impressive is the quality of your work as well as the presentation. You have a gift for teaching, and this is by far the best video I've seen for installation! Answered the key questions I couldn't find answers to. Thank you!!!!
Thank you so much for the kind words @thespiritualodyssey I really enjoy teaching and making these videos and comments like yours motivate me to keep going!
This video is simply awesome. It clears up many of the questions that I had, that other videos did not answer. What a find, I learned a lot. And thank you!!!
Excellent video, thank you! I’m about to lay the complete second floor. I intend to mix up the boards on the floor of each room beforehand to try and get a good match. I’m also a bit uncertain about how to handle the transition from one room to the next. My first thoughts are to have a solid wood strip separating each room, more or less in the middle of each doorway.
Hi @billfromgermany Good question! If all the rooms that you’re laying the floor in are on the same plane with no steps then you won’t need a transition piece separating the rooms. You just have to notch the flooring pieces that run into the door jambs. Thanks for watching!
Excellent step by step tutorial for DIYs, thank you Sean. I will keep following your detailed videos from now on.... looking forward to see Hard /Engineering wood installation videos and solutions to tricky door transitions
Awesome video, I’m ready to do my diy, every part of your video was precise, clear and the angle shot wow! Im about to binge watch your videos. Thank you so much for the video.
Very detailed and well executed work man! So what kind of flooring is that exactly? It looks like wood with a pass and the way it interlocks is prime! One little thing I noticed is you didn’t mention a control line or how it works. If someone is installing a floor next to a wall that isn’t straight or square with the rest of the room, then you’re going to be in trouble starting your first row pushed against the wall like that. Also floor joist have a play in which way they’re running by and how spaced they are… it ideal to have 16” joist gaps and you run your flooring by perpendicular to the way the joist are running. Thanks for the video and please tell me exactly my what flooring that is!
Hi @romanmorris6901. Thanks for the kind words. I'm glad you enjoyed it. Yes, I mention what to do about 3 or 4 rows in about what to do when pulling the rows away from the wall and shimming the space between the wall and the first row with shims. It's difficult to do while working just with the first row which is why I wait until 3 or 4 rows in when the group of flooring is more stable. If the wall that you're starting on is too wavy, then you're more than welcome to use the shims a little earlier than I did. As for the direction of the floor joists, I was installing over concrete so that didn't apply to my installation and it's difficult to address everyone's specific situation but to answer your question, no, the direction of the flooring joists below does not stipulate the direction of the direction of the floating floor. That rule applied back when they laid flooring directly on floor joists without a plywood subfloor. Now that we use subfloors, the flooring can be laid in any direction but usually running the length of the room is more common due to the fact that it makes the room look larger which I mention in the beginning of the video. I will look through my paperwork and find the exact name/brand of the flooring I used in the video. Thanks
I was subscribing the minute I saw the channel name because we Owens need to stick together hahahaha. Great video! This popped up on my feed at a perfect time! I am laying my first floor ever this weekend and you answered every question I had! Thanks!
Just saw this... I'm going to do my first try in about a week... Your video was very helpful add motivating as well.... Fingers crossed I do well the first try 😂
I saw you were at 996 and I know the feeling of being so close to 1,000 subs. I'm currently at 959 ahhh, so i subscribed to help you get there. Great job!! Thanks for sharing such great info.
Good instruction. There are a bunch of bad vids on RUclips for laminate -- guys installing it backwards, banging the joints together with a hammer, etc. Only comment would be the doubled up padding. I believe they recommend against using extra underlayment if your laminate has the attached because it creates extra movement in the joints. But overall very good detail vid
Thanks for the kind words @user-rv8zv7fl2s Yes, it’s true that too much padding under the flooring can create extra stress on the joints but there are a variety of thicknesses of vapor barriers and the built-in vapor barrier on the flooring that I installed paired with the thin vapor barrier I laid is a safe combo. Thanks for watching!
Thank you! I am doing my first project and this answers many questions and lots of tips, like starting with it against the wall so it doesn't slide around every where then adjust for spacing
Thank you for offering to answer question Sean! I bought my first home in Picture Rocks Tucson! I have laid 5,000 sq ft of flooring with my friend who just passed away. I helped cut, lay and tap. I am having trouble with understanding the measurements. You mentioned the 12 inch rule. How do I know how to start the second row third etc? You said never be less than 12 inches from the seems? How do I decide what size to start each row? How do I decide how much to measure the start of each row? You said we can use the last piece of the end of the row if it is bigger than 6 inches? Awesome broadcast! Glad I found you! Thank you!
Hi @cashvancarson9018 Thanks! The biggest thing to keep in mind with the size of the cut pieces when you're starting a new row is #1 - To make sure the cut piece isn't less than 8in. and #2 -Is to stagger the seams so they're more than 12in. apart from the previous row. You can use the scrap piece from the row you just laid if it works in conjunction with those two rules. If the scrap piece doesn't work with those two rules, you can either start with a full piece or cut a random size that does. I wouldn't overthink the exact size of the cut because there are a lot of sizes that would work for the row you're starting. I hope this helps and good luck with your project!
Not a problem!@@cashvancarson9018 You can either remove the existing baseboard and replace it with new baseboard when you're finished with the flooring or you can install a shoe moulding at the bottom of the baseboard when you're finished with the flooring so it covers the gap between the flooring the the baseboard.
Spot on, cheers. Its ages since I laid laminate and this video really helped plus you added some very useful pro tips that I will include. Respect. Jon
Does the “end” piece in the row have to be at least 8 inches as well? What if you’re starting a row where you’re going to have 2-3 inches gap at the end ? Thanks
Hi @jimeagle5509 The pieces at the end and beginning of a row technically shouldn't be less than 8 inches (some flooring brands require no less than 12 inches). It's easier to follow this rule when starting a row but sometimes you'll start a row with a larger piece but have to end with a small piece. It's not a big deal if they're are a couple rows with small pieces on the ends but try your best to calculate what pieces you're starting and ending with in a row so you can avoid the small pieces.
@@TheCarpentryConsultant Mine says 16 minimum length and at least 8 stagger. In your experience; how strict are those recommendations. It’s the Select Surfaces from Sam’s Club. Appreciate the videos and responses.
@@jimeagle5509 I recommend following the suggested spacing the best that you can but if you run into a certain section or two where you have to create a smaller piece that's less than the suggested spacing/size, it won't be a big deal. If you didn't follow the spacing at all throughout the entire process and every single cut and stagger joint was less than the suggested numbers, then over time your flooring has the potential to start pulling apart in high traffic areas.
Hi @eyes2see438 I am using a Diablo finish blade but you can use any brand blade you want. I recommend getting a finish blade with more teeth. The more teeth a blade has the smoother cut it will give. Let me know if you have any other questions!
Great video. I'm installing laminate where carpet use to be. Going from left to right I end up at the entry door and don't know how to fit that last piece under the door jam. Is there a way? Can I install right to left for this row?
Thanks @ookjai This may be difficult to explain without showing you in person but I’ll do my best. The flooring can be installed right to left if you have to but it’s a little more difficult to connect the pieces together but it can be done. If it’s an exterior door, you can cut the trim so the flooring runs under it and runs along the threshold. Then you can add a piece of quarter round trim that matches the color of the floor to hide the seam where the floor meets the threshold. If it’s an interior door, you can cut the trim so the flooring runs under it but since there is no threshold, you would have to cut the flooring so it butts up against the door jamb. I hope this helps but please feel free to ask if you have any more questions. Good luck!
Hi @monishajackson5019 Good question! Generally speaking, you can use a 3/8" spacer which would be ok with the majority of floating floors. Inside each box of flooring, there should be a paper with directions that will give you the recommend range of spacing needed for that specific flooring. Good luck with your project!
Hope all is well bro, I know you’re extremely busy with work and life, would you be able to tell me who makes the flooring and what’s the name of it? I really want to install in my home. That’s bro we appreciate you.
Hi @@jaybanuelos3205 Sorry for the delay! Here are the flooring specs: Aquaseal Water Resistant LAM 24 Natural Hackberry 12mm with pad Good luck with the installation!
Thanks @jimeagle5509 Unfortunately, I don't have a flooring video for diagonal cuts but the process will be the same except for the 45 degree cuts at the end of each row. You need to start in a corner of the room and cut a 45 degree angle on each end of your first board with the groove side facing you. The long points of the 45 degree cuts will be on the groove side so when you lay your first piece in the corner it will look like a triangle. The long points of the first piece you cut will determine the short points of the second piece. For example, if the long points of the first piece are 12in., then the short points of the second piece will be 12in. Once you start that pattern, you keep building from there. I hope that helps!
@@TheCarpentryConsultant I have an angle in 1 corner. Should I start on the angle side of the room? This is what it sort of looks like on the one side: ______________ / / /
Hi@@jimeagle5509 It's difficult to tell without seeing it in person but if there's a weird angle in the room, I always start on the easier side first so when you get to the angled portion you can take your measurements off of the flooring you already laid which makes it much easier. I hope this helps.
Do you have a tutorial that explains/ shows the different types of laminate flooring. Some seem pretty thin and other hearty. Do each have a certain use? Where can they be installed?
@luisasipple9315 As of right now, I only have one flooring installation video but seeing how well it's doing has made me consider doing more. As far as different materials go, there are quite a lot to choose from. It's difficult to compare different flooring options without being in person but it may be a little easier for me in this capacity to talk about price ranges. You can tell a lot about the quality of the flooring by how much it costs because even the cheap flooring looks great online. The flooring that costs around $1 a square foot, as you can imagine, is made from MDF and the top laminate layer is very brittle so it should only be used, in my opinion, in storage closets and other low traffic areas. The quality becomes more suitable for high traffic areas when the price hits the $4 to $5 range. I always pick a water resistant/waterproof flooring no matter where it's being installed. I've found that it holds up well in a various amount of conditions (especially if you have dogs). I hope this helps!
Hi, 1 question: is it a must to cut the tongue of the shorter side of your beginning pieces that face the (shorter side).of the wall? I would just skip this step. I don't see where this would give any benefit. Some do it, some don't. 🤷🏻♀️
Hi @beataszendrey That’s a good question. By cutting the tongue off your starting piece, it gives that row a little more room to expand but it’s not absolutely necessary so you can do it whichever way you prefer. Thanks for watching!
@@TheCarpentryConsultant I see, thank you very much for your help, I think I leave them on, the temperature is not bad now, but yes it can still expand. I just read it online that in this case we have to measure the length (distance) from the tongue and not from the smaller part. 🤷🏻♀️ This video is far the best one in this topic.
Hi @Othmnmo Good question. Yes, it's a good idea to cut off the factory end of a piece when you start a row. I explain this further at the 4:48 mark in the video. Please let me know if you have any more questions.
what if the groove is facing away from you? can you still do it as it is just not ideal or will it create a problem down the road and you have to start over?
Hi @mackycuarts You might be able to buy them in a kit together but if you go to Home Depot or Lowe’s they’ll be right next to each other in the same isle.
@@TheCarpentryConsultant thank you so much. I have another question though, we're planning to change the carpeted floor of our 1998 bungalow home,. Which part of the house would be the best place to start laminating the floor? Is it from the bedroom or start from the main door?
@@mackycuarts As long as you lay the flooring from left to right and move backward as you lay the rows, you can start anywhere you would like. Personally, I like starting in the largest or most prominent room and working my way to the smaller areas of the house.
@@TheCarpentryConsultant the most left part of the house is the foyer then living room it's the longest side to run the planks but once you reach the kitchen, the toppest part would be the bedroom
I may have a dumb question here. Is there a chop saw or a miter saw? I’m trying to learn this stuff. I was going to buy a miter saw, I am guessing it allows you to cut in different angles compared to a straight chop saw. But I wasn’t sure. I saw your video and figured I’d ask you.
Hi @TheJamsherSingh That's not a dumb question at all. A lot of tool names can be confusing and there are a lot of slang names for tools, for example, "saw zaw" is slang for reciprocating saw but either one would work when referring to them. Chop saw and miter saw can mean the same thing but technically a chop saw can not cut angles. Chop saw: Chop saws are usually used when cutting metal studs with an abrasive metal cutting blade. They are restricted by only being able to make straight cuts and theoperation of the arm can only move up and down. Miter saw: Miter saws have a wood cutting blade and are able to cut angles on materials. This is the basic tool that you would need to cut and install trim. Radial Arm saw: Lumber yards, Home Depot, and Lowes still use this type of saw but very uncommon to own in your home unless you have a workshop. It cuts wood by sliding forward and backward and can cut through thicker and wider pieces of wood but it's restriction is that it cannot move up and down like a chop saw or miter saw. Compound Miter saw: This is the most common saw and it combines the abilities of a miter saw and radial arm saw allowing it to move up and down, slide forward and backward, and can cut miters. This is the saw I recommend getting. I hope this information helps and please don't hesitate on asking about tools or projects. There's no such thing as a dumb question. Thanks!
I have a question, if I was to do new flooring for a whole house, and the layout of the house is a long corridor with rooms coming off the corridor, would you start in the middle of the corridor then span out on either side from this crucial point? Taking into consideration measurements from mid corridor to furthest wall in the other rooms. Just wondering how you would get direction (along the corridor) spot on. Thank you
Hi @johnpasqua9416 Very good question! It's difficult to tell you exactly what section to start in without seeing the exact layout of your house but hopefully this helps... When I lay floors throughout the entire house, I like to start in the largest room first, working from left to right. By starting in the largest area, there are a lot more sections to measure off of to ensure that the flooring lines up with the layout of the house and lands correctly when you get to the other bedrooms. Please let me know if you have any other questions.
Hi @Rizzy12345Rocks Unfortunately, no I don't have a video that shows how to install laminate flooring on stairs. However, I do show at the end of this video how to install the nosing piece that would go on each tread. To install laminate flooring on stairs, you need to start by connecting two pieces together and rip it to the size of your riser. Glue the section of flooring to the riser. Repeat that step until every riser has a section of flooring. Next, connect two more pieces together and rip it to the size of the tread. Glue each section of flooring to the tread. Repeat that step until every tread has a section of flooring. Last, you have to cut a nosing piece for each tread and glue it to the front of each tread like shown in the video. Use painters tape to tape the nosing down until the glue is dry. I hope this helps!
Hi @afterstars Since it’s a click and lock flooring, if your sections get separated in one part and come back together in another, they should line up as long as all your joints are tight. I hope this helps!
Hi @emoryholmes4563 I would cut at least 12 inches off the first board so you have a larger piece when you get to the end. Let me know if you have any other questions and thanks for watching!
Thank you for the important details! Wonderful video. I'm a 70 year old woman who laid my own floor. Your help is greatly appreciated!!
Wow, you are awesome! I’m glad the video helped!!
This is the only instructional tape that I've only seen that is point on with the details needed for a begginer. This guy is a teacher!
Thanks! @user-us1nt3ro2k
I really appreciate that!
I have watched a few videos about installing laminate plank flooring and this guy has the best detail instructions.
Thanks @run2fire
I really appreciate it!
I just want to say what everyone else here already mentioned, I watched ten videos and all of them good but felt like it was not enough to not doubt myself and go into the project with a little fear of messing up. Once I got to your video I clicked on it because of your awesome hair but then you started explaining the steps and I was hooked man. The detailed explanation, the camera angles, the re chalking of the things you already explained I came out knowing more out of your video than the ten others I had already watched. Thank you for doing us a great service and thank you for being awesome. You should definitely branch out to other social media sites if you aren’t already on them because you deserve followers and followers can definitely use a knowledgeable person like yourself to save some money in renovations or repairs. Thanks man and I appreciate the effort you put into the video.
@arielleon7236 Thank you for the kind words! Definitely one of my favorite comments of all time! Comments like these make all the work I put into these videos worth it.
Good luck with your project!
Came for the hair stayed for the content
Lol what a great line!@@tcuster55
Thank you
Also clicked for hair. What a good cut can do!
Thank you!!@@lilywhiteman1806
Great job with your tutorial. Getting ready to install our first room. We had decided to go without the underlayment but changed our mind after watching this video.
Glad the video helped. Good luck with your project!
You're a teacher ! Unlike any other videos I have watched so far on this subject. You explain the process so we learn while answering a viewer's possible questions . Special thanks to your videographer who did an awesome job to show the process explanatory. I truly appreciate it🙏
Thanks! @earthgraduate726
I really appreciate it!
Excellent video! This guy is so good at what he does and not alone that but can express it in his videos. So precise and explicit that he makes the task of laying floors very doable to the DIY person. Well done to you, keep up the good work and thanks.
Thanks for the kind words! @timdaly8057
Best instructional floor video on yt. Explains everything and shows everything and explains why. Camera is clear and is on everything hes explaining
Thank you. !!!!!
Thanks @AnjelSnow I really appreciate the kind words!
I must have watched 10 videos before I found this one. Superior explanation with awesome camera angles Thank you very much!!!
Thanks @Nusremmus I'm glad the video was helpful!
The best video to date on how to lay flooring. Thank you for your professional advice and work. Awesome
Thanks! @johnpasqua9416
Spot on this, was installing a floor Tomorrow but not anymore, they are in a cold garage so will be bringing them in tomorrow and leaving them for a few days to adjust to their new environment, great tip, thank you!
Thanks @nathanleigh3486
I'm glad you enjoyed the video and good luck with your project!
Definitely the best RUclips video on this subject !! Really appreciate the close ups and the excellent narrative.
Thanks! @shanedeveley731
That really means a lot to me.
Thank you!
It's impossible to make video on this subject better than this! Thank you very much!
Thank you! @Wats3d
I’m glad it was helpful!
Probably the best informative video I've seen on RUclips for installing Laminate flooring. Great job👍
Thanks @jallen1 I really appreciate the kind words!
I'm 71 and installing a vinyl plank flooring. I searched for many videos, and yours is the best. I have all the tools, except l have a plank cutter. I think I'll purchase the saw and a different heavier rubber mallet.
Hi @gailpdevine
Thank you very much for the kind words!
Good luck with your project!
Very well detailed, and thanks we were having trouble with ending row and you introduced us to the pull bar!!!
Thanks! @gamefootageHDtest
I’m glad it was helpful!
Just want to say thank you man! This video was super helpful.
Just finished up my future daughter’s nursery.
Thanks! @scottsmith4075
I’m glad you enjoyed it and congratulations!!
Thanks man! There are a good number of tips in here that really help, especially around the first few rows and adjustments before continuing on. Much appreciated!
@jasont4860 Thank you, I really appreciate the kind words!
Laying laminate floor next week, watched a bunch of instructional videos and this is the best yet, thank you from the UK!
Thanks! @pancakesgo7995
Good luck with your project and please let me know if you have any questions!
@@TheCarpentryConsultant Thanks, much appreciated. I have a question already! In my excitement I put down rolled foam underlay in advance of the laminate arriving. I've since read that it should ideally be laid at a 90 degree angle to the direction of the laminate panels. I have laid it parallel - is this likely to cause issues? I still have plenty of time to amend if necessary.
@@pancakesgo7995
Good question, either way you lay the vapor barrier it still does it's job. Some people are adamant about one way or the other but honestly it can go either way.
@@TheCarpentryConsultant Great, thanks for putting my mind at rest 👍
Thanks for the important details about how to account for the tongue and groove when measuring. Very helpful video.
Hi @zendobrendo0001
Thanks, I’m glad you enjoyed it.
Thanks for your comprehensive demonstration. As a newbie to floating timber flooring, I was really appreciative of all your very detailed instructions. Those tips make all the difference. To save time, money and anxiety, you REALLY don't want to have to learn these "on the job". Cheers from Australia!
Thanks for the kind words @59markr ! I'm glad the video was helpful!
Superb video 👌🏼 Great instruction, close-ups and detailed explanation. Top notch! 👌🏼 Thank you 🙏🏼
Thanks! @andiknowles3440
I’m glad it was helpful.
About the clearest video. Great explanations. I especially like your approach for the first rows and will be using that.
@grangermacy Thank you and good luck with your project!
Salute to you Sean. What a blessing you are for me with this video. Finally I'm able to follow thru on a dream of updating my floors. I live in an older home that I love. I'll be using a professional installer company.... prayerfully they will be as good as you. You've done a superb job in educating me....and I thank you. I'll be able to communicate with them and make sure they know that I know a little something. I won't feel like a novice....going into this venture blind. Again you are a blessing 🙌 for many. May God bless and shower you and yours with blessings....and the desires of your heart. You provide an awesome service. 😊❤
@diannewelch5258 Thank you very much for the beautiful words! It really means a lot to me.
I'm sure they'll do an excellent job on your project!
Very thorough compared to some other videos. Thanks bro
Thanks @mikeallenfpv
I’m glad you enjoyed it
Man, I've been watching these vids left and right and by far this was the easiest to "get it"! Thanks! Me n my 14 n 15 yr old boys will be tackling their bedrooms and I will have them watch this vid as well! Thanks again!
Thank you! @enzomoya1689
I'm glad you enjoyed the video and good luck with your project!
@@TheCarpentryConsultant I have a question? If my hallway flooring is north and south should the bedroom be the same or can I go east n west in bedroom? Thanks again!
@@enzomoya1689 You can run the flooring either way but I would run it the same as your hallway.
Let me know if you have any other questions!
You spoke about laying a moisture barrier if the floor was uneven before laying the laminate flooring. Be aware and check the instructions in the flooring box, because so say not to use any barrier underneath as it can scrub the warranty. Its better to check the floor with a level (I like the three bubble with measurments on the side) and then use floor patch to level the subflooring before laying the laminate flooring. Your video was great and very helpful in putting down these wonderful floors!
Hi @renehorne5792
Yes, I did mention the vapor barrier detail as well as what to do if the floor has some dips in it. The vapor barrier I used is compatible with the flooring but, of course, you should always check the directions from the manufacturer before installing.
Thanks for watching!
Whats impressive is the quality of your work as well as the presentation. You have a gift for teaching, and this is by far the best video I've seen for installation! Answered the key questions I couldn't find answers to. Thank you!!!!
Thank you so much for the kind words @thespiritualodyssey I really enjoy teaching and making these videos and comments like yours motivate me to keep going!
This video is simply awesome. It clears up many of the questions that I had, that other videos did not answer. What a find, I learned a lot. And thank you!!!
Thanks @joemd7775
I really appreciate the kind words!
Excellent video, thank you! I’m about to lay the complete second floor. I intend to mix up the boards on the floor of each room beforehand to try and get a good match. I’m also a bit uncertain about how to handle the transition from one room to the next. My first thoughts are to have a solid wood strip separating each room, more or less in the middle of each doorway.
Hi @billfromgermany
Good question! If all the rooms that you’re laying the floor in are on the same plane with no steps then you won’t need a transition piece separating the rooms.
You just have to notch the flooring pieces that run into the door jambs.
Thanks for watching!
Thanks for all the tips and detailed explanations. :) I'm going to install laminate flooring in my entire home, so this video was very useful.
Thanks! @borislavborisov82
I’m glad it was helpful. Please let me know if you have any questions during the installation.
Good luck!
Got more distracted from the hot guy 😂 thank u from the UK! Great video
Haha, thank you! @gemmacook8652
Best instructional video ever... it was soo helpful! Thank you!
Thanks! @TheMagicTaco
I’m glad it was helpful!
Excellent step by step tutorial for DIYs, thank you Sean. I will keep following your detailed videos from now on.... looking forward to see Hard /Engineering wood installation videos and solutions to tricky door transitions
Thanks! @ahmedsoliman2204
More videos coming soon!!
Awesome video, I’m ready to do my diy, every part of your video was precise, clear and the angle shot wow! Im about to binge watch your videos. Thank you so much for the video.
Thanks! @monicasmith4820
I'm glad you enjoyed the video!!
Very detailed and well executed work man! So what kind of flooring is that exactly? It looks like wood with a pass and the way it interlocks is prime! One little thing I noticed is you didn’t mention a control line or how it works. If someone is installing a floor next to a wall that isn’t straight or square with the rest of the room, then you’re going to be in trouble starting your first row pushed against the wall like that. Also floor joist have a play in which way they’re running by and how spaced they are… it ideal to have 16” joist gaps and you run your flooring by perpendicular to the way the joist are running. Thanks for the video and please tell me exactly my what flooring that is!
Hi @romanmorris6901. Thanks for the kind words. I'm glad you enjoyed it.
Yes, I mention what to do about 3 or 4 rows in about what to do when pulling the rows away from the wall and shimming the space between the wall and the first row with shims. It's difficult to do while working just with the first row which is why I wait until 3 or 4 rows in when the group of flooring is more stable. If the wall that you're starting on is too wavy, then you're more than welcome to use the shims a little earlier than I did.
As for the direction of the floor joists, I was installing over concrete so that didn't apply to my installation and it's difficult to address everyone's specific situation but to answer your question, no, the direction of the flooring joists below does not stipulate the direction of the direction of the floating floor. That rule applied back when they laid flooring directly on floor joists without a plywood subfloor. Now that we use subfloors, the flooring can be laid in any direction but usually running the length of the room is more common due to the fact that it makes the room look larger which I mention in the beginning of the video.
I will look through my paperwork and find the exact name/brand of the flooring I used in the video.
Thanks
I was subscribing the minute I saw the channel name because we Owens need to stick together hahahaha. Great video! This popped up on my feed at a perfect time! I am laying my first floor ever this weekend and you answered every question I had! Thanks!
Haha @SeanInAlaska that's awesome!! I'm glad you enjoyed the video and good luck with your project!
Love the flooring. I'm almost done my own bedroom I have 1 more coat of mud I had redrywalled it can't wait to be finished.
Thanks! @Thebarrioboy2009gma
Thanks for watching and good luck with your project!
Master of your craft, thank you sir for educating.
Thank you @5dc61
I really appreciate it.
Great tips ! I'm gonna follow this method , Thank you . Well Done !!
Thank you! Glad it was helpful! @guitarfool3881
Just saw this... I'm going to do my first try in about a week... Your video was very helpful add motivating as well.... Fingers crossed I do well the first try 😂
Thanks!! @jcynavarro
Good luck with your project!!
I saw you were at 996 and I know the feeling of being so close to 1,000 subs. I'm currently at 959 ahhh, so i subscribed to help you get there. Great job!! Thanks for sharing such great info.
Thank you!! I'm hoping to make it to 1,000 by midnight. So close!
@@TheCarpentryConsultant that would be freaking awesome!!! I'll share it with some people to try to help 😁
Woohoo your 1 away 😁😁
@@EpiphanyCreations Just made it!!
@@TheCarpentryConsultant congrats, that is freaking awesome!! And you only have like 13 videos 😲 I have over 200 and still haven't hit it haha
Great detail in your demonstration. For a first time DIYer, your video definitely helped me with my doubts. Thanks 👍🏻
Thanks @peterperillo I'm glad you enjoyed the video!
Finally someone that plays decent music
Thanks @punxnotdead3873 🎸
Good instruction. There are a bunch of bad vids on RUclips for laminate -- guys installing it backwards, banging the joints together with a hammer, etc. Only comment would be the doubled up padding. I believe they recommend against using extra underlayment if your laminate has the attached because it creates extra movement in the joints. But overall very good detail vid
Thanks for the kind words @user-rv8zv7fl2s
Yes, it’s true that too much padding under the flooring can create extra stress on the joints but there are a variety of thicknesses of vapor barriers and the built-in vapor barrier on the flooring that I installed paired with the thin vapor barrier I laid is a safe combo.
Thanks for watching!
Great tutorial. Thanks for all the detailed sections
Thank you @luisasipple9315
I really appreciate it!
Thank you! I am doing my first project and this answers many questions and lots of tips, like starting with it against the wall so it doesn't slide around every where then adjust for spacing
Hey @matthewmason9273 thank you! Good luck with your project!
By far the most professional and helpful video on the subject. Excellent work!!!
Thanks @syoung6126 I really appreciate it!!
Absolutely solid video, very well explained. Thanks so much!
Thanks @andrewdwillis6
I really appreciate it!
Thank you for offering to answer question Sean! I bought my first home in Picture Rocks Tucson! I have laid 5,000 sq ft of flooring with my friend who just passed away. I helped cut, lay and tap. I am having trouble with understanding the measurements. You mentioned the 12 inch rule. How do I know how to start the second row third etc? You said never be less than 12 inches from the seems? How do I decide what size to start each row? How do I decide how much to measure the start of each row? You said we can use the last piece of the end of the row if it is bigger than 6 inches? Awesome broadcast! Glad I found you! Thank you!
Hi @cashvancarson9018
Thanks! The biggest thing to keep in mind with the size of the cut pieces when you're starting a new row is #1 - To make sure the cut piece isn't less than 8in. and #2 -Is to stagger the seams so they're more than 12in. apart from the previous row.
You can use the scrap piece from the row you just laid if it works in conjunction with those two rules. If the scrap piece doesn't work with those two rules, you can either start with a full piece or cut a random size that does.
I wouldn't overthink the exact size of the cut because there are a lot of sizes that would work for the row you're starting.
I hope this helps and good luck with your project!
Sean! Thank you again! Do I have to remove the baseboard?
Not a problem!@@cashvancarson9018
You can either remove the existing baseboard and replace it with new baseboard when you're finished with the flooring or you can install a shoe moulding at the bottom of the baseboard when you're finished with the flooring so it covers the gap between the flooring the the baseboard.
This is a perfectly explained video.
Thank you @user-ze6do7kf4e
This is a fully detailed video. Well done.
Thanks! @speedyswoodshop
Dude this is the best video! So clear and easy to understand. Exactly what I needed. Thank you and I subscribed.
Thanks @JoseHernandez-gz2um
I really appreciate it!!
Thank you for making this video. How exactly did you attach the riser? Did you glue that piece as well like you did the bull nose?
Hi @billhelmken5483
Yes, I glued the riser on.
I’m glad you enjoyed it!
Dude. I enjoyed your video and I learn a lot from it. Great job!!!
Thanks @SuperLeroy85
I really appreciate it!
That was pretty informative. Nice job.
@jamesalston8134
Thank you, I’m glad you enjoyed it.
The best teacher ever😊🙏🙏
Thanks! @wilbervelasco5841
I really appreciate that!!
Spot on, cheers. Its ages since I laid laminate and this video really helped plus you added some very useful pro tips that I will include. Respect. Jon
Thanks @jonmelkay I'm glad the video helped you!
Very nice video. Love the details great work.
Thanks! @TheJamsherSingh
Does the “end” piece in the row have to be at least 8 inches as well? What if you’re starting a row where you’re going to have 2-3 inches gap at the end ?
Thanks
Hi @jimeagle5509
The pieces at the end and beginning of a row technically shouldn't be less than 8 inches (some flooring brands require no less than 12 inches).
It's easier to follow this rule when starting a row but sometimes you'll start a row with a larger piece but have to end with a small piece. It's not a big deal if they're are a couple rows with small pieces on the ends but try your best to calculate what pieces you're starting and ending with in a row so you can avoid the small pieces.
@@TheCarpentryConsultant Mine says 16 minimum length and at least 8 stagger. In your experience; how strict are those recommendations. It’s the Select Surfaces from Sam’s Club. Appreciate the videos and responses.
@@jimeagle5509 I recommend following the suggested spacing the best that you can but if you run into a certain section or two where you have to create a smaller piece that's less than the suggested spacing/size, it won't be a big deal. If you didn't follow the spacing at all throughout the entire process and every single cut and stagger joint was less than the suggested numbers, then over time your flooring has the potential to start pulling apart in high traffic areas.
Thank you for every single detail
Thanks for watching @fookwengyong5011
I'm glad you enjoyed it
What kind of blade did you purchase for your chopsaw? I have a Dewalt.
Hi @eyes2see438
I am using a Diablo finish blade but you can use any brand blade you want. I recommend getting a finish blade with more teeth. The more teeth a blade has the smoother cut it will give.
Let me know if you have any other questions!
Appreciate the walk through bro!
Thanks @JakeStowers
I’m glad you enjoyed it!
Very well explained.. Thankyou
Thanks @benjibob4662
I’m glad you enjoyed it
This was the best EVER ! Thanks
Thanks! @jameshair4082
I’m glad you enjoyed it!
Nice tunes, good install! Who did that ink work? They did a good job too!
Thanks! @SidemenFishing
Her name is Nikki from Working Class Art in Branchburg, NJ. She’s very talented!
Great information and very helpful.
Thanks @kenw305
I'm glad it was helpful!
Excellent. I am 73 and I am going for it, only 1,000 sq ft, 6 rooms.
@davidlis6709 Awesome, good luck!!
Let me know if you have any questions.
Thank you for your teaching
I’m glad it was helpful! @gussmaa4430
Great video. I'm installing laminate where carpet use to be. Going from left to right I end up at the entry door and don't know how to fit that last piece under the door jam. Is there a way? Can I install right to left for this row?
Thanks @ookjai
This may be difficult to explain without showing you in person but I’ll do my best.
The flooring can be installed right to left if you have to but it’s a little more difficult to connect the pieces together but it can be done.
If it’s an exterior door, you can cut the trim so the flooring runs under it and runs along the threshold. Then you can add a piece of quarter round trim that matches the color of the floor to hide the seam where the floor meets the threshold.
If it’s an interior door, you can cut the trim so the flooring runs under it but since there is no threshold, you would have to cut the flooring so it butts up against the door jamb.
I hope this helps but please feel free to ask if you have any more questions.
Good luck!
Such a great breakdown
Thank you so much
Thanks @abmargol123 I'm glad it helped!
What floors were these? They were exactly what I’m looking for, for my man cave
Hi @chasewatson1505
I’ll look through my paperwork and see if I can find the exact model number for you.
How do you know what size spacer to use? We are in Houston Texas. Some times it’s hot and sometimes it’s cool.
Hi @monishajackson5019
Good question! Generally speaking, you can use a 3/8" spacer which would be ok with the majority of floating floors.
Inside each box of flooring, there should be a paper with directions that will give you the recommend range of spacing needed for that specific flooring.
Good luck with your project!
Some times it's in the pot nine days old
Great video. Very helpful
Thanks! @TheNewYorkTony
Great vid brother!! Quick question, what kind of flooring is that and who makes it?
Thanks! @jaybanuelos3205
I’ll look back at my records and see what the name of it is.
Hope all is well bro, I know you’re extremely busy with work and life, would you be able to tell me who makes the flooring and what’s the name of it? I really want to install in my home. That’s bro we appreciate you.
Hi @@jaybanuelos3205
Sorry for the delay! Here are the flooring specs:
Aquaseal Water Resistant LAM 24 Natural Hackberry 12mm with pad
Good luck with the installation!
Thanks. Very detailed and helpful video
Thanks, I'm glad it helped! @scottmattock4084
Great video. Do you have a laminate install video with slanted/diagonal cuts…?
Thanks @jimeagle5509
Unfortunately, I don't have a flooring video for diagonal cuts but the process will be the same except for the 45 degree cuts at the end of each row.
You need to start in a corner of the room and cut a 45 degree angle on each end of your first board with the groove side facing you.
The long points of the 45 degree cuts will be on the groove side so when you lay your first piece in the corner it will look like a triangle.
The long points of the first piece you cut will determine the short points of the second piece. For example, if the long points of the first piece are 12in., then the short points of the second piece will be 12in.
Once you start that pattern, you keep building from there.
I hope that helps!
@@TheCarpentryConsultant I have an angle in 1 corner. Should I start on the angle side of the room? This is what it sort of looks like on the one side:
______________
/
/
/
Hi@@jimeagle5509
It's difficult to tell without seeing it in person but if there's a weird angle in the room, I always start on the easier side first so when you get to the angled portion you can take your measurements off of the flooring you already laid which makes it much easier.
I hope this helps.
Do you have a tutorial that explains/ shows the different types of laminate flooring. Some seem pretty thin and other hearty. Do each have a certain use? Where can they be installed?
@luisasipple9315
As of right now, I only have one flooring installation video but seeing how well it's doing has made me consider doing more. As far as different materials go, there are quite a lot to choose from. It's difficult to compare different flooring options without being in person but it may be a little easier for me in this capacity to talk about price ranges. You can tell a lot about the quality of the flooring by how much it costs because even the cheap flooring looks great online.
The flooring that costs around $1 a square foot, as you can imagine, is made from MDF and the top laminate layer is very brittle so it should only be used, in my opinion, in storage closets and other low traffic areas.
The quality becomes more suitable for high traffic areas when the price hits the $4 to $5 range. I always pick a water resistant/waterproof flooring no matter where it's being installed. I've found that it holds up well in a various amount of conditions (especially if you have dogs).
I hope this helps!
Very well explained thank you!!!!
Thank you @HaniBee0
I'm glad you enjoyed the video!
Hi, 1 question: is it a must to cut the tongue of the shorter side of your beginning pieces that face the (shorter side).of the wall? I would just skip this step. I don't see where this would give any benefit. Some do it, some don't. 🤷🏻♀️
Hi @beataszendrey
That’s a good question. By cutting the tongue off your starting piece, it gives that row a little more room to expand but it’s not absolutely necessary so you can do it whichever way you prefer.
Thanks for watching!
@@TheCarpentryConsultant I see, thank you very much for your help, I think I leave them on, the temperature is not bad now, but yes it can still expand. I just read it online that in this case we have to measure the length (distance) from the tongue and not from the smaller part. 🤷🏻♀️ This video is far the best one in this topic.
Do I still need to expansion gap even though I am installing laminate in the summer. Or doesn’t matter the weather?
Good question! @Othmnmo
You should always have an expansion gap no matter what season you’re installing the flooring.
Do we have to cut any the groove and the tongue against the wall?
Hi @Othmnmo
Good question. Yes, it's a good idea to cut off the factory end of a piece when you start a row. I explain this further at the 4:48 mark in the video.
Please let me know if you have any more questions.
what if the groove is facing away from you? can you still do it as it is just not ideal or will it create a problem down the road and you have to start over?
The pull bar and the block, do you have to buy them separately? Thanks
Hi @mackycuarts
You might be able to buy them in a kit together but if you go to Home Depot or Lowe’s they’ll be right next to each other in the same isle.
@@TheCarpentryConsultant thank you so much.
I have another question though, we're planning to change the carpeted floor of our 1998 bungalow home,. Which part of the house would be the best place to start laminating the floor? Is it from the bedroom or start from the main door?
@@mackycuarts As long as you lay the flooring from left to right and move backward as you lay the rows, you can start anywhere you would like.
Personally, I like starting in the largest or most prominent room and working my way to the smaller areas of the house.
@@TheCarpentryConsultant the most left part of the house is the foyer then living room it's the longest side to run the planks but once you reach the kitchen, the toppest part would be the bedroom
Awesome video.
Great video! Thank you.
Thanks @nancygarciacamacho8531
I'm glad you enjoyed it!
I may have a dumb question here. Is there a chop saw or a miter saw? I’m trying to learn this stuff. I was going to buy a miter saw, I am guessing it allows you to cut in different angles compared to a straight chop saw. But I wasn’t sure. I saw your video and figured I’d ask you.
Hi @TheJamsherSingh
That's not a dumb question at all. A lot of tool names can be confusing and there are a lot of slang names for tools, for example, "saw zaw" is slang for reciprocating saw but either one would work when referring to them.
Chop saw and miter saw can mean the same thing but technically a chop saw can not cut angles.
Chop saw:
Chop saws are usually used when cutting metal studs with an abrasive metal cutting blade. They are restricted by only being able to make straight cuts and theoperation of the arm can only move up and down.
Miter saw:
Miter saws have a wood cutting blade and are able to cut angles on materials. This is the basic tool that you would need to cut and install trim.
Radial Arm saw:
Lumber yards, Home Depot, and Lowes still use this type of saw but very uncommon to own in your home unless you have a workshop. It cuts wood by sliding forward and backward and can cut through thicker and wider pieces of wood but it's restriction is that it cannot move up and down like a chop saw or miter saw.
Compound Miter saw:
This is the most common saw and it combines the abilities of a miter saw and radial arm saw allowing it to move up and down, slide forward and backward, and can cut miters. This is the saw I recommend getting.
I hope this information helps and please don't hesitate on asking about tools or projects. There's no such thing as a dumb question.
Thanks!
I have a question, if I was to do new flooring for a whole house, and the layout of the house is a long corridor with rooms coming off the corridor, would you start in the middle of the corridor then span out on either side from this crucial point? Taking into consideration measurements from mid corridor to furthest wall in the other rooms. Just wondering how you would get direction (along the corridor) spot on. Thank you
Hi @johnpasqua9416
Very good question! It's difficult to tell you exactly what section to start in without seeing the exact layout of your house but hopefully this helps...
When I lay floors throughout the entire house, I like to start in the largest room first, working from left to right. By starting in the largest area, there are a lot more sections to measure off of to ensure that the flooring lines up with the layout of the house and lands correctly when you get to the other bedrooms.
Please let me know if you have any other questions.
Super nice video! Thanks
Thanks @dougmacfarlane2671
I'm glad you enjoyed it!
Do you have any vids with doing stairs? I ot mine to do but am a bit timid and worry I may mess it up. Thanks
Hi @Rizzy12345Rocks
Unfortunately, no I don't have a video that shows how to install laminate flooring on stairs.
However, I do show at the end of this video how to install the nosing piece that would go on each tread.
To install laminate flooring on stairs, you need to start by connecting two pieces together and rip it to the size of your riser. Glue the section of flooring to the riser. Repeat that step until every riser has a section of flooring.
Next, connect two more pieces together and rip it to the size of the tread. Glue each section of flooring to the tread. Repeat that step until every tread has a section of flooring.
Last, you have to cut a nosing piece for each tread and glue it to the front of each tread like shown in the video. Use painters tape to tape the nosing down until the glue is dry.
I hope this helps!
Can I get this guy come and do my floors?????
Very helpful! Thx so much 😊
Thanks @Meli0710
I'm glad the video was helpful!
Thank you for this.
I’m glad it was helpful! @rannuon8370
What happens when you’re doing an entire first floor and you run into an area where rooms join? The boards won’t line up
Hi @afterstars
Since it’s a click and lock flooring, if your sections get separated in one part and come back together in another, they should line up as long as all your joints are tight.
I hope this helps!
I have the same flooring, however, 5 full planks get me to the other end, but I’m 3 1/8” short how do you add the additional 3”?
Hi @emoryholmes4563
I would cut at least 12 inches off the first board so you have a larger piece when you get to the end.
Let me know if you have any other questions and thanks for watching!
amazing. Thank you .. truly...
I’m glad it was helpful!
THANKS! it does help a lot! I have a zoo at home
You're welcome!
Very nice work
Thanks! @Sony72604
I’m glad you enjoyed it!
thanks you very much muchas gracias SUSCRIBED
🤘metal intro !