Это видео недоступно.
Сожалеем об этом.
Passat B6 with B7 Can Gateway Coding and installation list
HTML-код
- Опубликовано: 2 окт 2021
- In depth description of the features of the car listed in the can gateway. Car is a B6 Passat with most of the modules from B7 or similar. Thanks for watching and please help the channel grow by subscribing.
Hello I have a passat b6 with ACC radar on powertrain. I tried to retrofit 7n0 gateway but I get front assist and ACC cruise control faults. Do I need to disable ext can on gateway as my ACC is on Powertrain/relay?
You have very nice car and good informative videos! Subscribed :)
in the past I had a b6 and had to change the newer gateway because of GPS RNS 510 initially I had MFD2
How do do u know where u wire the clock to on the B6 illumination and power i can do just don't know where the wire goes to change the time on clock
If i ll choose battery regulator?!Shows the shock at start or the tension before starting the engine and after helping to see that generaypr works correctly!?Thanks
helló barátom segítséget kénék! hogy tudom ki kapcsolni a világítás hiba kódot ??mert a halogént le cseréltem led izzó ra és a műszerfalon hibát mutat. köszönöm /Passat b7 2012 2.0 diesel
Helló! Nem mindenki beszél magyarul :)
Azt csak VCP vel lehet, BCM kimenet kódolatlan.
Buna ziua am o întrebare ce modificări trebuie aduse unui B6 2010 Highline pentru lane assist și park assist
The B7 with a diesel engine and auxilary heating installed has 18 in the installation list. I have one myself and had to check 18 when switching to 7N0 BR. I had a 1K0 (7N0 GW before). Which Camera is installed in your passat at the moment ? Do you have 3AA, 3Q0 or even already 2Q0 ?
I think in my case because is from a 2014 B7 the climatronic box is probably different from some models,if is added aux heating i get module not found so is probably ecu controled in my case. camera is 3AA now because i didn't wanted to make a custom bracket. still have 3Q camera waiting to go in my cc 2011. thats next project. for health reasons i had to stop for a bit.
Update: fitted 3q camera since few months now and is better than the 3AA . Really good choice.
What is difference between 3aa and 3q?
I tried retrofitting xenons in my passat b6 bought the cables that are plug and play but now I don’t have high beams only dipped beams any idea?
If you bought aliexpress kit pin 14 on headlights is ground and you need to add the pin in the connector and connect to ground.
Cecm needs coding to be E version at least and coded to xenons.
Need to run the wire to rear level sensor as well.
Hello. Do You know Why in my Passat 2011 comfortline I dont have phone menu on MFD? I have rns 315 and I turned on Bluetooth via vcds. Everything Works fine but that Phone menu is not shown :/
Maybe not coded. Go to gateway with vcds and see installation list, add telephone if is not selected.
I have Passat B6 and I bought the cluster instrument of Passat CC 2010, I didn’t start the replacement yet i want to know is it plug and play or it needs more modifications which only workshop can do ?
If you have 2005-2007 cluster, the plug is different, you need an adapter and the can gateway upgrade to a 2008-2010 cc or b6
Hello, I have a Passat b7 gasoline, after retrofitted the can gateway I need to check battery regulator, but if I check I get module incorrectly coded on module 61, if i uncheck a get incorrectly code on module 19 , can you help me?
Well, you need to code the battery regulator after you add to installation list.
I have a 2013 Passat CC and i installed a MQB Steering wheel similiar to yours, but i cant get the steering wheels buttons to work. Paddle shifts works just fine, bu nothing from the buttons, how did you got them to work?
Look at the buttons on the wheel, make sure is the same layout. They are 2 kinds
What steering wheel do you have and whay gateway would i need
Check the other videos about steering wheel, all there
I put a gateway way with a different number and it's working fine without coding. Should I coding it??
see if you have anything missing in the instalation list, or any errors in the module. might be lucky to come from same spec car but still have to check coding.
@@lavianeverything thanks for your reply
@@lavianeverything from where can I get the Vcds coding.?? Can you help please?
I need help with steering collum Lock, after 7n0 Gateway.
good afternoon my friend, how are you?
I'm from Brazil and I have a 2012 tsi gasoline passat.
He started to get very light steering and lock the gear in one gear. an error appears with a spanner symbol. when the mechanic uses the scanner it shows solenoid sometimes it shows acc. do you have any ideas friend?
thanks
afonso
Mecatronics, send it to repair
thank you my friend
Hello bro, i have a passat b7 , after replace the can module, i already coding at the installation list, but the esp and abs is still on error . Could you provide some coding solution to activate the abs and the esp ? Thank you so much
Go to abs module and see what faults you have. How did you get the faults, how it happened? Surely something happened to get the faults, maybe you disconnected battery and it just needs basic settings?
@@lavianeverything it need basic setting, because i just replace the gateway module . And the fault code is incorrect coding. So i need a basic setting to activate the esp and abs .🥹
Hello sir i have a passat b6 2010 after replacing the cpu i have the "immobilizer active " alaram that won't go away
What do you mean CPU? Maybe ECU or CCM , if that’s the case then you need to pair it. Get a experienced person to do it I suggest.
@@lavianeverything i mean the car computer but apparently they didn't copy everything from the old one so they had to hack or something? In order for it to read the key
@@lavianeverything i meant ecu lol
@@slhedn6749 get the ecu coded , get data from old and copy to new.
@@lavianeverything it's burned they couldn't get it out