Bro my bike only 5 month old 1300 km In 80km facing havy wobbling And stock tayer in CEAT tyre Today i visited show room they told that well Spocket problem is this Then i go to a lock shop and adjust my weels in 700 rps But still facing same issue plz give me a suggestion. Inspiring your video I am using zana's engines cashgad Someone told that zainaz engine crash guard is the problem Is it any reality Please give me a good suggestion
I dont think so zana crash gaurd is the problem i still use it and no wobbling.. Check tyres if there are wear and tear, if the bike has fallen..sometimes even that can be problem coz tcone settings would have disturbed. Since it is just 1300km u should not be facing this problem. I believe service centre guys should fix this. It will be minor one
i own GT 650 , 8 months old - 4700 driven , I'm facing death wobble between 80-100kmph , i have not mis handled or rash driven , im basically a calm driver. more over as its 8 month old bike CEAT tyres have installed from showroom. before this a bike had fallen side my side , i have checked the fork oil and kept company recommended air pressure, Stock tyres but still wobbles a lot is it the issue of cone set ?( because the is only pending that i haven't checked) any solution for this ?? even any viewers can also help me out ??
Hi, I have CEAT tyres installed (which are in store tyres, there when I bought) on my Interceptor, but I've started experiencing mild wobbling at 6500 kilometers. Now, at around 8000 kilometers, the wobbling has become quite heavy, especially at speeds between 60-70 kilometers per hour. Last month, I drove my vehicle for around 20 kilometers on off-road mountain roads, which were full of stones. I'm concerned if this off-road drive might have caused any damage to my suspension or rims. Any advice or insights on this issue would be greatly appreciated.
Please check any wear and tare on ur tyres or rims there might be small bends (as u said could be because of off roading u did) Also check the front suspension .. and tcone settings… That should be the only reason.. until unless ur bike has fallen ..
You should not be using ralco tyres there not for interceptor 650 It is p rated tyre means max u can do 150kmph u should always choose h rated tyres for twins as they can handle 210kmph speed.
I noticed wobbling today, I open RUclips and this is what comes on my feed. Thanks for the info tho. I think I'll check with the wheel alignment.
RUclips is listening to you 😂😂..
Hope the wobbling goes off
I have changed to ceat and the issue appears at 100kmph. It was at 70-80kmph previously
Both tyres? Try to check the tcone settings..
do you have spokes or alloy rim?
I found it pretty helpful, thank you so much ♥️
🙏🏼👍🏻
With ceat tyres also it’s wobbling…2022 may model
Yes it is
Sir check your wheel alignment and tcone settings.
Should not be anything major
Mine july, wobble starts at 80kmph
same
do you have spokes or alloy rim?
Bro.what is tcone setting?
Allignment done
Fork bearing checked
Fork oil checked
I think i will change tyre from ceat to mrf
Please let me know if it fixed.
First change it to mrf
do you have spokes or alloy rim?
use apollo alpha tyres..it is better..i have shifted to them and now zero wobbling
Can you tell me the size of these tyres? Are they same dimensions as the stock? And how much do they cost?
Bar end mirror info please and how did you install it on Interceptor's handle bar
These are jawa 42 bike one.. got it from olx for 1k and direct fit to interceptor 650
Reviews on their field of view? And are there any vibrations above 100?
No not really… they are stable
Mine is wobbling afer 80kmph.using ceat zoom tyres.Did u do any wheel balancing?
Yes I had dont it, check ur wheel balancing and tcone settings…
do you have spokes or alloy rim?
Bro my bike only 5 month old 1300 km
In 80km facing havy wobbling
And stock tayer in CEAT tyre
Today i visited show room they told that well Spocket problem is this
Then i go to a lock shop and adjust my weels in 700 rps
But still facing same issue plz give me a suggestion. Inspiring your video I am using zana's engines cashgad
Someone told that zainaz engine crash guard is the problem
Is it any reality
Please give me a good suggestion
I dont think so zana crash gaurd is the problem i still use it and no wobbling..
Check tyres if there are wear and tear, if the bike has fallen..sometimes even that can be problem coz tcone settings would have disturbed. Since it is just 1300km u should not be facing this problem.
I believe service centre guys should fix this.
It will be minor one
@@shaik_rides ❤️❤️❤️
do you have spokes or alloy rim?
i own GT 650 , 8 months old - 4700 driven , I'm facing death wobble between 80-100kmph , i have not mis handled or rash driven , im basically a calm driver. more over as its 8 month old bike CEAT tyres have installed from showroom.
before this a bike had fallen side my side , i have checked the fork oil and kept company recommended air pressure, Stock tyres but still wobbles a lot
is it the issue of cone set ?( because the is only pending that i haven't checked)
any solution for this ?? even any viewers can also help me out ??
May be may not be,,, if u have not checked it please check.. it might be small adjustments here n there n itshould fix the issue
do you have spokes or alloy rim?
Reduce front air pressure by 2 psi- it gets sloved.
Ok never thought about it, will try to implement that:.
🙏
Price of front ceat tyre ? How much did it cost?
Close to 2.5k I believe
Hi,
I have CEAT tyres installed (which are in store tyres, there when I bought) on my Interceptor, but I've started experiencing mild wobbling at 6500 kilometers. Now, at around 8000 kilometers, the wobbling has become quite heavy, especially at speeds between 60-70 kilometers per hour.
Last month, I drove my vehicle for around 20 kilometers on off-road mountain roads, which were full of stones. I'm concerned if this off-road drive might have caused any damage to my suspension or rims.
Any advice or insights on this issue would be greatly appreciated.
Please check any wear and tare on ur tyres or rims there might be small bends (as u said could be because of off roading u did)
Also check the front suspension .. and tcone settings…
That should be the only reason.. until unless ur bike has fallen ..
do you have spokes or alloy rim?
I already ahe ceat tyres den to its happening machine is telling change the tyres
No, please check wheel alignment of the front wheel, there might be small bends or front forks oil might be less. Please Check on that
With ralco tyres its still wobbling...viciously.
You should not be using ralco tyres there not for interceptor 650
It is p rated tyre means max u can do 150kmph u should always choose h rated tyres for twins as they can handle 210kmph speed.
Me watching it having ceat tyres on my INT 650 and looking for a fix 😂
Same here 😂
Ha ha good one, check for tcone settings it may help fixing👍
Same… wobbling with ceat at 5K
Same wobbling with ceat also
There must be wear and tear…in your tyre..
do you have spokes or alloy rim?
MRF wobbles the most !!!!!!!
Wheel aligment for 90% rider
True…
Bro its a Bike 😂 not vehicle 😂
😂true
Brother is video se pese mile tumhe ?
No bro… this is not promotional video..
this is informational video that can help people.
All bull sheet talk my interceptor bs6 woobling issue starts from after 140km....otherwise no woobling issue at all
Happy to know that u dont face wobbling issues … it doesnt mean others dont…
@@shaik_rides their luck does not fabour