Thank you for the information. I was connecting usb from remote to micro usb on the aircraft. Didn’t know I had to use adapter to connect to micro USB port on controller. Thanks for taking the extra step to help the universally challenged.
When I turn on the handset and craft on my phantom 4pro + it won’t allow me to fly. When I press GO FLY nothing happens. I presumed firmware needed updating but can’t find how to do that. No message comes up on screen telling me so. Can you help. Don’t know how to get out of this
I have the same problem, did you try updating the controller, lots of people have this problem but nobody comes back and explains the solution. Did you get the video fixed??
Hello all well and good would like to know about the update of Phantom 4 Pro v01.03.0418 second comments this knocking down the drones wanted to know if it is true and if you have any information on this. Thank you in advance, I await your response.
Can I ask you to delve into your wealth of knowledge to solve a problem I have with my P4P+? Every time I turn on the controller a message pops up asking me to calibrate the compass in the controller and there's a picture of a figure 8 procedure. I have tried it with the controller horizontal to the ground, sideways & even upside down, all to no avail. Any idea what to try next & will it affect the flight characteristics? Cheers
Marionville Multirotors Thank you for the reply, I managed to sort it out. I have another question if I could impose once more... The default RTH altitude setting is 30m, I prefer it higher but it seems no matter what number one enters, there is no enter/save/ok button, so it defaults back to 30m when the unit is switched off. Am I missing something, is there anyway to save the desired altitude? Cheers...
it's was but found out ricc I needed to use OTG as I was USB rc to micro USB P4P but now I micro USB rc to OTG adaptor to micro USB P4P I couldn't find a video with p4p+ with rc built in screen thanks ricc I didn't realise was u 👍
Become a Patreon of my channel and support me to keep the videos coming.
www.patreon.com/marionvillemultirotors
Thank you for the information. I was connecting usb from remote to micro usb on the aircraft. Didn’t know I had to use adapter to connect to micro USB port on controller. Thanks for taking the extra step to help the universally challenged.
ToNY Vix your welcome.
Thanks RIC for your uploads . Very helpful to a newbie like me ✌✌
When I turn on the handset and craft on my phantom 4pro + it won’t allow me to fly. When I press GO FLY nothing happens. I presumed firmware needed updating but can’t find how to do that. No message comes up on screen telling me so. Can you help. Don’t know how to get out of this
great info, thanks...
Metal Propeller Mount Connectors for DJI Phantom 4, good or bad idea?
Deff a bad idea. never use any third part parts on DJI craft. Metal adaptor will ware the props very quickly so its a deff no.
I did the updates but now my camera not working.keep say no signal on top left corner
Mine doing the exact same thing.
I have the same problem, did you try updating the controller, lots of people have this problem but nobody comes back and explains the solution. Did you get the video fixed??
Hello all well and good would like to know about the update of Phantom 4 Pro v01.03.0418 second comments this knocking down the drones wanted to know if it is true and if you have any information on this.
Thank you in advance, I await your response.
What to do for extra batteries
Can I ask you to delve into your wealth of knowledge to solve a problem I have with my P4P+?
Every time I turn on the controller a message pops up asking me to calibrate the compass in the controller and there's a picture of a figure 8 procedure. I have tried it with the controller horizontal to the ground, sideways & even upside down, all to no avail. Any idea what to try next & will it affect the flight characteristics?
Cheers
Andy G I haven't come across this before.
Marionville Multirotors Thank you for the reply, I managed to sort it out.
I have another question if I could impose once more... The default RTH altitude setting is 30m, I prefer it higher but it seems no matter what number one enters, there is no enter/save/ok button, so it defaults back to 30m when the unit is switched off. Am I missing something, is there anyway to save the desired altitude?
Cheers...
Andy G once entered that should be you. Auto saves the value you enter.
Mine is doing the same thing at every start up.Pro plus.
Greetings to all, control plus can be changed to Spanish ??
Sorry I’m not sure.
how do I update NFZ for Phantom 4 pro plus
If your connected to the internet it should pop up when you switch on the screen.
it's was but found out ricc I needed to use OTG
as I was USB rc to micro USB P4P
but now I micro USB rc to OTG adaptor to micro USB P4P I couldn't find a video with p4p+ with rc built in screen thanks ricc I didn't realise was u 👍
How to update extra batteries?
Vishal Chandora just insert each batter and it will go through a short update.
plus
I did that update.now my camera image is not working.keep showing the no signal sign at the top left corner
Junior Folkes is it a Pro or Pro Plus.
Same problem for me. Pro Plus. Any solution? It also keeps telling me to update even though I already updated it...
Did you find a solution to this?? Just got my pro+ and having this issue... Thanks!
Did you find a solution to this?? Just got my pro+ and having this issue... Thanks!
Mine is a pro plus and no camera now.