John Deere 450C cold start/farm work
HTML-код
- Опубликовано: 8 сен 2024
- This is a 450c I purchased back in early fall. I paid $14,500 for it and shortly after I got it I fixed the winch. The grand total on the winch is about $1,300. All new parts are in it now. I’ve wanted a 450c for many years now since my dad sold his about 7 years ago. I wanted the C model because of the wet clutches. I hear they last for a long time versus the dry ones. This dozer is really handy for cleaning my property up. I bought property from an Amish man that select cut the timber and I’m cleaning his mess up. He sold me 13.323 acres for $26,000. This land borders my dads and I lived close to this property all my life so I really wanted it and made sure I got it. These small dozers have quite a bit of power and move great in the woods. Many of the loggers in this area love them compared to new dozers .Please like, share, and subscribe today!!!
John Deere 450C injector fix • 450C John Deere dozer ...
Grew up as a kid running one of those! My father was a contractor. Great machines for there size! Put a brush guard on the blade to protect the radiator! Also add side and rear brush screens to protect the operator! Enjoy your machine! God bless you and stay safe!
Yeah my dad had one also for almost 20 years. I do want to make several upgrades to it. First I want to fix the 6 way blade control. Has a lot of slop in it
Nice looking dozer. Makes me want to clean mine up. Love the 450c tractor.
yes them models are really damn good ones!
Nice dozer. Can't wait to see more videos of this thing working.
Thanks. I will get more. Need a better way of filming it. It’s hard to film with a camera and operate at the same time.
@@Paw95 you could get a GoPro and then get a head strap or chest mount
thanks again Preston.have a nice day stay save en warm. groeten:Peer.
Stay warm over there! We had snow the other day and it was awful lol
Nice Job Preston !!
Told Scott you need to take it down to the Peavine washouts and start fixing them . Glad you purchased it
Haha yes it could push the dirt back up the hill that’s for sure. It’s really fun to play on and very helpful around the house.
Just bought one last night. Excited to do some work with it
That’s great! I have a lot of fun with the one I have. I hope it works good for you.
Paw95 loving it so far! Runs like a top, got new rails and drive sprockets. And steer clutches.
I have a 350C. The tracks and track adjusters are in about the same condition as yours. When their extended that much susceptible to coming off. I'm replacing the front idlers. New adjuster pistons. Likely going to remove one link as well. Actually would have preferred a 450 but settled for the 350c.
Back in spring I called about a whole new Undercarriage from John Deere. They said ITR was a good brand and it was $10,000 for everything. I’m going to buy a little bit at a time. A new one will last me a long time as little as I use it.
Nice job Preston!
Thanks!!! I got laid off work for the winter again. Video making time again. Hope to get a Peavine stone train soon!!
I have same dozer. I bought it in 1988
I just love mine. It needs work here and there but still works great.
I have been looking at a couple of this dozer or very similiar. I have land at 7,500' its steep hills and valleys. Im wanting to make some trails and do some logging. Most of the people around me have tracked skid steers they work with, they just get very expensive very fast. Im not sure what kind of maintence abilities are required with the old machines.
On mine the biggest Job and most expensive was track replacement and that was almost $10,000. Most of the time I’m just changing filters for oil,air and fuel. Then some other small things. I did replace a head gasket one time but that was only $50 from John Deere. Wasn’t that hard of a job either. Skidsteers would be better in a way since you could do alot more with them. I really like this old dozer though.
@Paw95 one of them here says undercarriage is 75%, and is asking 25k, not sure if that sounds off. I'm also not sure if the dozer would have enough power to make roads at 7,500' in the side of a mountain. Thinner air effects power.
@@Mountaintoptractor 75% is really good. I’d look make sure frame isn’t broke or has loose bolts. People always liked to cut a bigger hole to get the starter out which is not a wise decision. Also if you look at one make sure it doesn’t have blow by. You can check that by letting it idle and loosen the oil cap and let it set there. If it blows it off then the engine is wore out. Check oil pressure for worn out engine also. Mine runs up near 40 when it’s hot almost 50 psi when it’s cold after first start up. Now at high altitudes I’m not so sure. I’m at 800-900 foot most of the time on mine and it has enough power to push trees over.
@Paw95 good to know thank you! I'm on the fence between the dozer or an old tree farmer skidder with a 353 Detroit, with 1600hrs on a rebuild of motor/winch, with new center pin. The dozer would be more useful but at 2.5x the price I have neighbors that have equipment as well they can help with the trail building stuff.
@@Mountaintoptractor very good! Helps to know people like that. I want a 353 to put in my old army truck that I have on this channel. Or a 4 bt Cummins.
Nice dozer. Careful pulling logs like that putting it in gear and dragging them. I did that and took out the final drive bearings. Supposedly you're supposed to Free Wheel going forward and then winch them to you
Jacob Bradburn so winch while going forward? Never thought about that really.
No, drive the machine forward while the winch is in neutral or free spool, then winter load to you when you park. I have a td8 international and I normally pull forward 25 to 40 ft and then winch my load to me. Basically inchworm
thatwas a graet job to repaire the buldozer Preston,motor sounds for 100% oke.mabey you find some gold,lol. thanks for the video ,greetz:Peer. and proost. Amstel Bier.
Haha I hope you are staying warm over there. I need to send a card back out for you!!!
@@Paw95 Ha Preston.yes i have to send 3 postcards to the USA. i have seen mutch snow in Ohio on Railstream live.and NY.Waldwick. stay save and warm to Preston.greetz:Peer.
Crack the throttle open for cold start. I have never used ether on my 450C.
I tried this on mine and it didn’t do anything different. What I did do was added an external block heater. So that really helped out big time.
What year is your machine? I have the same exact model and I can’t find a serial number look up anywhere on the internet. I paid 20,000 for mine. I overpaid but it has had two owners and was stored under cover it’s whole life. It was so clean I had to buy it. No issues so far🤞
They are great machines. Unfortunately mine didn’t have the tag either. I had to find one similar with the serial numbers. So I’m not sure of the year really.
take off back plate under cab should have numbers
I have the 6410. Would love that hydraulic blade.
that blade makes life a lot easier cutting grade. I would like to upgrade to a 450G someday. the G models are better.
Just wondering
Since you have the dozer why don't you work on the drainage problem you have around your garage ?
I would do that but i actually dont own that land right there.
👍
I see on google map how mutch forest is removed.lol.
The state forest around here is being cut all up it’s awful looking. Like it was bombed out
i think that the dynamo/alternator not loading up..
ha Preston,did you make new videos lately? lol. have a nice weekend en stay save.grettz:Peer. cheers!!!!!!
Paw you did a ton on work on this, cutting trees moving them must-have taken a week. So is that a spring fead pond or does the water come from a creek. I see there is a pipe coming from under the road there not much water coming out of it. I bet there is a ton of fish in that pond going to be nice when you get it filled up
It’s got 4 small streams that feed it. Not much water runs down them until it rains some. That pond is loaded down with fish also!!
What model winch will work on that?? I have a dozer and wanted a winch for it !! Its same model machine
It’s a 3325 I think. I’d have to look in my papers tomorrow.
Do you know anybody selling a 350C or a 450C JD dozer
I have saw a few on facebook for sale today. they are in ohio. I don't know anyone selling any right now.
Nice 450C! I am hoping to get 12-15k for mine. I pulled it out of a pasture from a gentlemen who wanted it gone about a year ago. I am currently "going through" it now before I put it up for sale. Does yours have the "airesearch" turbo on it?
It has a turbo on it. I couldn’t tell you what kind it is though because I don’t know much about Diesel engines yet.
Subbed Awesome dozer we have a 450c also it’s been great!!! Had it since 1991 lol. 👀@ hour account when you have a chance
Thanks!!! I have no idea on hours. The meter is missing. Was missing when I purchased it.
I need one like your for pulling logs on my 34 acres in WV. Nice dozer, is it for sale?
Tim Giles no I’m going to hold onto this one. It’s been pretty difficult to find a decent one around here. I’m from around Portsmouth Ohio.
@@Paw95 Nice machine. I'm up here in Newark, Ohio but I need it at my property in WV.
@@timgiles9413 Did you every get a dozer, I'm looking for a 350C or a 450C
@@robertgilbert6939 No, not yet. The one I was going to buy, the guy backed out as I had the money in my hand. It was his Dads and he just couldn't part with it. It's all in Gods timing.
Hey buddy saw a video of you unboxing some m2 ball couple years ago would you help a fellow out seriously got m1 no ammo
you can see on google map wat you have done with this John Deere,realy,go and see on google map.you wil be suprised,lol.
Haha I was on it today lol. I’ve been super busy here at home and work. Will try and make some more videos as soon as possible.
@@Paw95 hoi Preston,oke,wel i wait en see those videos coming,have a nice day.greetz:Peer. its today here F75/c25.
Dude, just watched your ruger mark Iv video where you are shooting the water and since you had the comments disabled I decided to catch up with you here. Very bad decision you made by doing that. It’s people like you that hurt the gun community! You should take that video down. G the hose bullets could richochet across that water and hurt someone !!