Bought this +5 kit to see if I could install it, as easily as you did. Took a little bit for me to get the spring modification right, but i got it! Got 21 rounds to fit. Pretty stoked about getting my first drop-in modification done. Thank you for this video!
I'm really enjoying your videos. You are so informative. I've learned a lot. Perhaps you could do a video if you haven't already on MCK GEN 2 V. MICRO RONI, WITH GLOCK AND SAR being very similar in size. Thanks for great content!
So a cz mag will work but you need a sig p320 mag spring? I'm looking at getting one of these (I enjoy "budget" guns and love m taurus g2c).. between this and the canik , I hear the canik might be a slightly better choice, but this one just speaks to me lol . It looks pretty.. I already have a decent light/laser imgoing to swap out from taurus but a couple extra rounds would be nice. Just wondering how complicated it is.
As an owner of a SAR 9, I REALLY APPRECIATE your videos,very nice work.Could you please put a copy n paste of this part on my comment like you did on the strike+5 video comment section.Thank you.
Also I wanted to know your thoughts on the Sig p320 mag..its almost identical but the mag release is about a half inch lower than the Sar..do you think a new mag slot could be cut higher with a dremel?
Depends what you want, 1. High lumen big light rechargeable or battery operated 2. Small/ med size light rechargeable or battery operated. I would check the availability on holsters with lights for this gun first, if you are going to carry with light.
I make my own kydex holsters so I don’t have that problem, but that’s why I have learned how to make them because of the availability and a custom holster starts at $100.
A lot is going on with our 2A right, let me rephrase that most of our rights and moral have being stripped by the Gov. Its soooo ridiculous and childish. With everything going on companies are scare of manufacture new firearm products specially extended mags. Extended mags sales pretty good, specially when the gov try to ban them.
I don’t recommend it, died couple of time in the safe after fully charged. Sub Compact Tactical Rail Mount LED Flashlight Light 450 Lumen with Strobe for Pistol Handgun, Built-in Rechargeable Battery www.amazon.com/dp/B08M5XB6DW/ref=cm_sw_r_cp_api_glt_fabc_R7XZ6TY3XX91KGQRCH1R?_encoding=UTF8&psc=1
If it's 9mm then you can cut a slot on the p320 mag about a half inch higher than the slot on the SAR 9..then it will lock in just like a sar9 mag..use a Dremel cutting bit very carefully.
@@gunsrus777 hey bruv,do you have any 7.62×39 caliber guns?..if you do then I can send you a link to an ammo place in Texas that has the legendary 7.62 8M3 hollow point rounds,they are the ultimate defensive round for the AK47...the bullet shatters inside and dumps all the energy into the target..no over penetration..it causes MASSIVE wound cavities in the gel blocks..its very impressive ammo.
Here we go…. www.ebay.com/itm/SHIELD-ARMS-CZP10F-P09-Billet-6061-Alum-GREY-Grip-Extension-Magazine-Plate-Pad-/284245050592?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
If you using the spring that came with it, the spring needs to be modified. But if you using the OEM 17rd spring shouldn’t be any problem, but if you have problems with the factory spring, filled the sharp corners of the bottom of the follower ( the plastic peace that push the bullets) if you have grease apply a lil with your finger where the bottom of the mag met the new floor plate +5 and apply the same on the +5 where the floor plate where the plate meet the mag shell in the inside.
Bought this +5 kit to see if I could install it, as easily as you did. Took a little bit for me to get the spring modification right, but i got it! Got 21 rounds to fit. Pretty stoked about getting my first drop-in modification done. Thank you for this video!
Works flawlessly, I will be ordering another one for my second mag . Just haven't decided t go with the Red again or go black.
100rds no malfunctions.
@@anthonymckay9404 hey man I can’t find these where did you get them
www.ebay.com/itm/SHIELD-ARMS-fr-CZP10F-P09-Billet-6061-Alum-RED-Grip-Extension-Magazine-Plate-Pad-/283984767557?_trksid=p2349624.m46890.l49286
I'm really enjoying your videos. You are so informative. I've learned a lot. Perhaps you could do a video if you haven't already on MCK GEN 2 V. MICRO RONI, WITH GLOCK AND SAR being very similar in size. Thanks for great content!
Got it bro thank you so much
I have a Sar PT9 17rd mag.. will this fit.. and will the extended mag you made will it fit my Sar ST9?? Thx
Don’t know at this moment since I don’t own a ST9
@@gunsrus777 ok.. thx ima give it a try and fine out..
So a cz mag will work but you need a sig p320 mag spring? I'm looking at getting one of these (I enjoy "budget" guns and love m taurus g2c).. between this and the canik , I hear the canik might be a slightly better choice, but this one just speaks to me lol . It looks pretty.. I already have a decent light/laser imgoing to swap out from taurus but a couple extra rounds would be nice. Just wondering how complicated it is.
How much it be for you do one for my sar 9
So the strike industries plate will fit the sar9 magazine
The +5 from Strike Industries will fit. But need to trim the tabs a little.
As an owner of a SAR 9, I REALLY APPRECIATE your videos,very nice work.Could you please put a copy n paste of this part on my comment like you did on the strike+5 video comment section.Thank you.
Thanks for watching!!! here you go...I got it from eBay.
SHIELD ARMS fr CZP10F P09 Billet 6061 Alum RED Grip Extension Magazine Plate Pad
@@gunsrus777 Thank you very much Sir.
NP👍🏼
@@gunsrus777 I just bought the black one..did you see on the site that it uses a system with a pin instead of a screw?
Also I wanted to know your thoughts on the Sig p320 mag..its almost identical but the mag release is about a half inch lower than the Sar..do you think a new mag slot could be cut higher with a dremel?
Where did you purchase the light for it? And what brand of light it is?
www.opticsplanet.com/crimson-trace-tactical-weapon-flash-light-for-picatinny-or-similar-rail-equipped.html
Crimson Trace
Want to get a good laser/light combo for my SAR9. What do you recommend?
Depends what you want,
1. High lumen big light rechargeable or battery operated
2. Small/ med size light rechargeable or battery operated.
I would check the availability on holsters with lights for this gun first, if you are going to carry with light.
I make my own kydex holsters so I don’t have that problem, but that’s why I have learned how to make them because of the availability and a custom holster starts at $100.
m.olightstore.com/baldr-s.html
TACTICON FIREFLY Version 5
Can we get a link to purchase the plus 5 kit
www.ebay.com/itm/SHIELD-ARMS-CZP10F-P09-Billet-6061-Alum-GREY-Grip-Extension-Magazine-Plate-Pad-/284245050592?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
As per the beginning any mag ext foe the cz p10f or p09 will fit the sar9, is this correct?
That’s correct, the spring that comes with the mag extension won’t fit is different. You can order a Sig P320 spring from Taylorfreelance.com
Also the p320s extensions will fit and the spring will be the correct one.
@@gunsrus777 fit the sar9?
Can you please provide the link to buy the mag extension
www.ebay.com/itm/SHIELD-ARMS-CZP10F-P09-Billet-6061-Alum-GREY-Grip-Extension-Magazine-Plate-Pad-/284245050592?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
Hey bro will the CZ P10 mags will fit with not alterations to the magazine itself?
Sorry but don’t understand your question. Mags will fit to the magazines. Please re-frase the question.
Where do I order a plug5 clip for the sar9 at online ?
NOT suspicious that only very few companies make an extended mag for SAR ?
A lot is going on with our 2A right, let me rephrase that most of our rights and moral have being stripped by the Gov. Its soooo ridiculous and childish. With everything going on companies are scare of manufacture new firearm products specially extended mags. Extended mags sales pretty good, specially when the gov try to ban them.
just curious why you didn't purchase directly from shield arms ?
Hi where can I find this extension??
www.ebay.com/itm/SHIELD-ARMS-CZP10F-P09-Billet-6061-Alum-GREY-Grip-Extension-Magazine-Plate-Pad-/284245050592?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
How did you get the spring to change shape to fit
Where can I buy one??
eBay $39.95, SHIELD ARMS fr CZP10F P09 Billet 6061 Alum RED Grip Extension Magazine Plate Pad
Can I put a 30 round on my sar 9
Yes
Where can I get a 30 for my sar 9
@@jojobooming8566 u found one,
@@gunsrus777 where? Which one I can’t find aby
Where did you get the flashlight attachment v
I don’t recommend it, died couple of time in the safe after fully charged.
Sub Compact Tactical Rail Mount LED Flashlight Light 450 Lumen with Strobe for Pistol Handgun, Built-in Rechargeable Battery www.amazon.com/dp/B08M5XB6DW/ref=cm_sw_r_cp_api_glt_fabc_R7XZ6TY3XX91KGQRCH1R?_encoding=UTF8&psc=1
V?
Does anyone know where I can find a threaded barrel for the sar9
SARUSA ... $100 for threaded barrel... Thread Size M 13.5x1 LEFT
Nice!!!👍🏼
@@Juno_Beach thank you very much
Hey I forgot to mention everyone HKParts (Utah) has a $30 micro comp that fits SAR 9 threaded barrel
can you please SLOWLY repeat those model numbers ?
Is There Anyway To Make The P320 Clip Snap In?
I don’t know, I have a p320 but is .40 s&w so the mag won’t fit anyways.
If it's 9mm then you can cut a slot on the p320 mag about a half inch higher than the slot on the SAR 9..then it will lock in just like a sar9 mag..use a Dremel cutting bit very carefully.
Good to know, Thanks
@@gunsrus777 hey bruv,do you have any 7.62×39 caliber guns?..if you do then I can send you a link to an ammo place in Texas that has the legendary 7.62 8M3 hollow point rounds,they are the ultimate defensive round for the AK47...the bullet shatters inside and dumps all the energy into the target..no over penetration..it causes MASSIVE wound cavities in the gel blocks..its very impressive ammo.
@@jameslevolo8791 🤗
Where can I get one
Here we go….
www.ebay.com/itm/SHIELD-ARMS-CZP10F-P09-Billet-6061-Alum-GREY-Grip-Extension-Magazine-Plate-Pad-/284245050592?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
@@gunsrus777 thank you kindly
🦾
Where can I get one from
www.ebay.com/itm/SHIELD-ARMS-CZP10F-P09-Billet-6061-Alum-GREY-Grip-Extension-Magazine-Plate-Pad-/284245050592?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
Will this fit st9
Don't think so bro
Ok well I’m like the others patiently waiting for them to release mags and other goodies
@@mizznaynay2000 same it'll come around eventually
@@mizznaynay2000 same im waiting on a 30 mag to come out
Can only get 19 in☹️ otherwise the bullets jam up or won't go in
which spring you r using? the factory or the one came with the +5?
If you using the spring that came with it, the spring needs to be modified. But if you using the OEM 17rd spring shouldn’t be any problem, but if you have problems with the factory spring, filled the sharp corners of the bottom of the follower ( the plastic peace that push the bullets) if you have grease apply a lil with your finger where the bottom of the mag met the new floor plate +5 and apply the same on the +5 where the floor plate where the plate meet the mag shell in the inside.
4:45
4:07
Tried everything now the bullet wont even get in the chamber now, fit 22 but slide won't close and bullet jams
I only got 19 rounds to fit.
??
Went back and corrected something I got 21 in now one short.
@@anthonymckay9404 what spring are you using?
I used the spring that came with it. But I do have the SAR 9X mags which are marked 17 rounds
BZ09