Weird Powerdisc & Ecodisc setup + Epic Lutz lifts
HTML-код
- Опубликовано: 8 фев 2017
- Filmed with LiftSurfingGermany
Please note: Please don't attempt to copy what you see in this video without understanding of how to do it safely. I don't mean to sound bossy or tell people what to do. I just don't want people to get hurt. Just from watching my videos will not give you all the knowledge required to safely enter lift shafts. 
Развлечения
That weird KONE you spotted is called a "MaxiSpace"
It has a 6:1, 8:1 or 10:1 roping ratio, without counterweight.
If you encounter those, make sure you keep tension on the ropes. they are very strong, but easily damaged. If there is slack on the cables, and they snag somewhere you could damage them.
And trust me, the last you want to do as a technician is to replace those ropes, which could be easily 300 meters long (1 cable). and, they have to be replaced all at once.
you are also lucky these ones don't have a DOM security system, that activates when you open the door with a key. otherwise, you need to reset the system with a very annoying procedure. keep this in mind.
I don't know how I managed to find this channel; but I feel like I'm watching a Cbeebies educational tv show but the subject matter is on illegally trespassing a building; and talking about stuff a child would never understand with the occassional comments about prostitues; drug dealing and chav's. This... this is amazing.
This is one of the best comments I have ever had!
Lilliannette
U can surf a lift
I love how that lift says 'hello' on start up 🙂
Those old Klutz (that may be wrong) are awesome.
Great tram footage.
The cables are flimsy because they don't need to be particularly thick. KONE MiniSpace employs 8:1 roping. That's how they get away with not having a counterweight. Without counterweight, the elevator (or lift, or whatever the stupid word you use to name a hoisting apparatus) "freefalls" downwards.
Think you mean MaxiSpace there. MiniSpace is a MMR traction.
Zurich is crammed of Schindler m-series lifts. tell me should you ever wanna come by!
cool powerdisc and ecodise beno
Hi Beno,
Do you know why powerdiscs have buffers on top of the cars? I've never seen anything like this before.
Here in Brazil, we don't find many kone's, i like them a lot.
I thought it was because they free fall upwards, but they don't. It must be for if a fault causes to to overrun. Normally lifts are limited with how high they can go because the counterweight hits the buffer.
That's because there is limited space on the top of the car. it keeps the technician alive in case things go wrong. Because, as Beno said, there is no counterweight to buffer out and limit the upwards travel.
Awesome video!! Look at that powerdic motor! I was thinking it was bigger than that! What does the repeater board do? What components are on it?
powerdisc.
Sam Sitar Missing capital letter, full stop unnecessary. ••pukes••
The repeater board is for the technician to program the elevator's parameters. It also has input for the weighing device, and other components. Usually, when this board is present, the main CPU board has no numeric display or buttons.
repeater board does the exact same thing that a wifi repeater does - it extends the range (in other words, via some cables, you have access to the main controller without having to enter the shaft. instead of using the controls on the main controller, you can control it from a distance. that's what a repeater board does.
So yes only counterweight lifts will only free fall downwards
what outis
was it was it
every video you show configuring and surfing lifts, how did you get allowence?
do you really think he is allowed to do this? hahaah
Dont have brains. Making dangerous actions
rokade9
_Do you prefer hydraulics or tractions?'_
Karol Juszczak all
@@xavier6130 i prefer both
1:45 loud vf drive
That bus was a MAN bus wasn’t it
I could tell I ride one everyday and recognise the articulation
The ones we have here are
28.310 busses
otis destroyed that modded elevator. pvta has some bendy buses.
Why they are rare? Is it because they are new? Or too expensive for owners to install it?
powerdiscs are very very loud, that is a reason to not choose it for most building owners.
Because they're indeed noisy. They are designed to replace an existing elevator and get the maximum car space in an existing shaft. (hence the name MaxiSpace) because there's no space needed for a counterweight. But, they're fragile. there are a couple of pulleys down in the pit, so once you have a bit of water in there, all the pulleys need to be replaced, because the bearings will break when submerged in water.
Kone yessssssssss
Are you a lift tech Ben?
EdgyNumber1 He isn’t
Location?
Undisclosed
Why are the subtitles DUTCH
XDXDXD
Will you stop commenting with everything with XD at the end
At 2:90 That relay sounded bad...
2:20
Kone power disksssssss
hi beno you are the best left suffer in the world I really want to meet you one day please reply to this comment
best lift company - Lelliac
worst lift company- gernenic (not stannah and oakland)
Oakland is crap
No, the best lift company is Schindler (or some other big elevator company), not Lelliac.