Can we all just take a second to appreciate how much work Bryan is putting in these videos? I mean the dude is literally giving us all this useful ass information for free. Bryan you're a G my guy!🙏🏽💯
just got a 2018 340, best car ive ever owned, came from a daytona charger, but this is the perfect channel i needed to find thank you, cant wait to stage 1
Thank you soooo much for this video... I'm was right in the middle of ordering and had questions and then I saw this video... THANK YOU! .... P.s. should of mentioned to use anti-seeze on the back of the spacer so it won't stick...
With the proper spacer, like 12mm, could you run a rear size 400M wheel up front so you can have a wider tire? And out of curiosity, could a 9.5 wide wheel fit up front, or would it rub on suspension and/or the wheel well liner?
What's the problem running 10mm all round? I have an f83 and would like a little poke. Its standard height and can't be lowered, so too much poke looks silly.
Is there anyway with the stud coversion to get a wheel locking lugnut or wheel locking stud ? i have wheel locks atm and i want spacers but i do also want to keep a lock on each wheel ??
What do you think about this fitment for bmw 330e m sport 2018 (f30) - - front 225/40/19 DOT 2019 - rear: 255/35/19 DOT 2020 - front: 8,5J ET23 - rear: 9,5J ET38 - Michelin Pilot Sport 4s i will appreciate your feedback, thank you.
Hey what’s up fellas just wanted to say keep up the good work I love your channel since I’ve been watching it for the past week I just had a question I wanted to put some staggered wheels on my 2015 three series 328I gt xdrive and I wanted to know the size tires I needed for these rims 20" STAGGERED RENNEN WHEELS CSL 7 SILVER WITH CHROME LIP RIMS
I have 2014 bmw 328i xdrive , is it safe to do this set up of spacers with new wheels ? New wheels , Apex Arc 8 Wheels 18x8.5 ET35 square set up , with tires 225/45 r18
I'm looking for wheel spacers for my 2015 335i, it has the stock 19s on it, will 10 front 12 back make it flush or do you think I should go with the 12/15?
With respect to clearance, not sure either. Scrub radius issues aside, I understand the thicker spacers cause cLearance issues. Can someone explain this one?
I’ve been having a hard time finding consistent info for the 400m specs. I have a 2018 340i xDrive - I’m fairly certain it’s a square 18x8 but still iffy on the offset. Is it safe to assume they’re +34?
The front tyre gap on my e60 is 15mm and the rear wheel gap to fender is 20mm. The rears are further in. What spacers would be best 5mm front and 15or 20mm rear? I want the rears to have more poke but not that it sticks out the fender arch like in your video. I want the rears to stick ot staggered compared to the fronts. Do I leave the 15mm gap at front and go for 15 or 20mm just on the rears? Let me know which ones you would go for to give it the desired look. I am on the original 17’s but lowered 30mm only. Please let me know
Hey was looking at putting spacers on my f30 but mine looks way lower than that car from factory would it catch on the side it’s 26.5 inches on the back from the ground and 27.1 inches on the front and 19 inch rims
For 4 spacers and stud conversion, it was $372 shipped (from Kies). Going to be money well spent. And, while I was ordering those, I decided to buy Bootmod3 from them too! Can't wait!!
Can we all just take a second to appreciate how much work Bryan is putting in these videos? I mean the dude is literally giving us all this useful ass information for free. Bryan you're a G my guy!🙏🏽💯
6:25 ///10: Front 12: Rear
8:08 ///12: Front 15: Rear
11:02 ///12: Front 18: Rear
We need more special guests like this! And the epic b roll was so good !!! Thanks for the shoutout!!!!!
Must have mud flaps 👌
Hey Tommy how can I order myself some of your worlds famous mud flaps?
I could definitely use some mud flaps as well, after going with a wider offset, my car always looks like I’ve been out mudding 😂
I have a 2016 340i sport line and I went 15 in the back 10 in the front, lowered on kw v3s. Fitment is pretty much perfect.
Those studs are a must-have!
Does putting on spacers cause the tires to wear faster?
can you add spacers on staggered wheels?
@@anthonypipia6990 yes
@@anthonypipia6990 yes you can
@@Benny-zo3qh no it doesn’t cause tire wear in fact gives you better handling
Well done guys.. spacers and longer studs have made all the difference in my F32.. all from Kies!!
Think I’ve watched all your videos in the last 6 months since I bought my f30, thank you 👍🏻
just got a 2018 340, best car ive ever owned, came from a daytona charger, but this is the perfect channel i needed to find thank you, cant wait to stage 1
BRYAN, PLEASE MAKE THE F30 SPA....... WAIT.... HELL YES!!!! THANKS BROTHER!!
Josh got it haha
Finally! It was worth the wait!!
Super helpful! Been debating what size and this was a perfect video to compare them all
Just as I was googling this. The timing is impeccable!
Thank you guys so much for doing this!!! I honestly can't thank you enough. I'll be making my order asap!! 👍👍
That praying mantis needs to be part of the team now😂
Literally he was the star of this episode lmao
Watching your videos and getting ideas ready for my F30 build. Can’t wait to start vlogging in December and show you my build
My f32 is on hr super sport with b8 shocks. 442Ms. 12.5 F 20 R. Perfect fitment zero rubbing
These spacer guides are great man!
Best comparison shots of any related video. 10-12-15-18. Gonna try 18 for the rear of my F02
Bryan's flow is getting gnarly 👊 #teamlonghairdontcare
I'm still waiting for a G20 M340i spacer guide~~ Keep it up, man!
It's filmed and should be edited soon 👍🏼
That will go down as my fav video cuz of the mantis!!
I'll never forget the time Kies made a video just for me!!! 🤜💥🤛
Thank you soooo much for this video... I'm was right in the middle of ordering and had questions and then I saw this video... THANK YOU! .... P.s. should of mentioned to use anti-seeze on the back of the spacer so it won't stick...
Thank you so much! I was looking for low profile jack for DIY! Now I know what I need to buy!
i have learned so much from these vids man! thank you
That little guy has good taste 😌
Thanks josh whoever your are
👍😁
I have 10 in the fronts and 25 in the rear. Lowered with BC BR coilovers, -2.5 camber all round. Just sharing!
Link to lugs ? Or you running the conversion?
Love these spacers
Great video man...been looking for a good comparison video for 2 months... Id love to see same video on a w210 E55 AMG...
I was going to put
My 20 inch diablos on my 328I but here in Michigan streets is so bad I think I like 18 and 12 for my stock 18 inch rims. Thanks.
With the proper spacer, like 12mm, could you run a rear size 400M wheel up front so you can have a wider tire? And out of curiosity, could a 9.5 wide wheel fit up front, or would it rub on suspension and/or the wheel well liner?
And.... order placed!! 👍👍
Great video, great comparison.
What wheels are those that he put on at the end
I went with 15 f and 20 r plus lowering springs. 328i looks awesome
Are you AWD ?
xdrive?
What's the problem running 10mm all round? I have an f83 and would like a little poke. Its standard height and can't be lowered, so too much poke looks silly.
Hey great video. What happen to the link for the kid flaps?
Kies tell me what will be the best ET in the f30 M-package for 20 inch wheels?
What does a widening involve from the point of view of the stresses on the bearings?
Not enough to make a difference.
Would you recommend doing this over getting wider tires ?
How are the studs compared to bolts in the snow belt parts of the country?
Doesn't really matter where you're located it'll just always make taking the wheels on and off a million times easier
Speedy Gonz F22 my question concerns rust and the seizing of the nuts on the studs...
can you guys do a E90 guide?
What should I get for spacers if I was looking for perfect figment
I love the intro music! Who produced it?
I have staggered from factory. Rear tyres are 8.5 j and front is 8. Xdrive Would a 10mm in the rear and 12 in the front be OK?
I assume this would be pretty much the same for an F32.
I think I'll go on 12 front and 18 rear :D
Is there anyway with the stud coversion to get a wheel locking lugnut or wheel locking stud ? i have wheel locks atm and i want spacers but i do also want to keep a lock on each wheel ??
Can you have a staggered setup, 10mm front 12mm rear on an xDrive model ?
Yes
Whats the size of the black rims and the tires and the spacers? Thanks
I don't understand why running a 10 in the back is not safe; what clearance issues are there (that are not present with OEM)
yo bryan, witch size studs i need for a bmw f30 320d 2013.
grts from belgium
Same size. All are F30 so they are the same.
What do you think about this fitment for bmw 330e m sport 2018 (f30) -
- front 225/40/19 DOT 2019
- rear: 255/35/19 DOT 2020
- front: 8,5J ET23
- rear: 9,5J ET38
- Michelin Pilot Sport 4s
i will appreciate your feedback, thank you.
I run 15mm all around on my F22
I didn’t see the TLG mudflats
So, does the lug conversation kit change the wheels from being hub centric to lug centric?
No
What’s the potential risk/issue with doing 10mm in the rear?
Your wheel falling off?
Hi Brian could you tell me what the dimensions ie. Size Width and offset of the black wheels you installed on this video? Like the fitment
Hey what’s up fellas just wanted to say keep up the good work I love your channel since I’ve been watching it for the past week I just had a question I wanted to put some staggered wheels on my 2015 three series 328I gt xdrive and I wanted to know the size tires I needed for these rims 20" STAGGERED RENNEN WHEELS CSL 7 SILVER WITH CHROME LIP RIMS
I have 2014 bmw 328i xdrive , is it safe to do this set up of spacers with new wheels ?
New wheels , Apex Arc 8
Wheels 18x8.5 ET35 square set up , with tires
225/45 r18
Do you have the exact link to the wheel studs and spacers please, I don’t see them in your website ?
They come sunken in because in Germany sometimes you need to equip your car with snow chains, so the wheels further in accommodates for that.
i have 10mm F&R on my F32
I'm looking for wheel spacers for my 2015 335i, it has the stock 19s on it, will 10 front 12 back make it flush or do you think I should go with the 12/15?
I have 12/15 on mine and its flush
top video thanks love the wheels
Those curb rash tho Brian!
Why not 10mm in back ? If stock wheels offset is lets say 37 and with a 10mm spacer is 27. What clearance issue will it have?
With respect to clearance, not sure either. Scrub radius issues aside, I understand the thicker spacers cause cLearance issues. Can someone explain this one?
Do you need an alignment after putting spacers?
What are those rims ?
I’ve been having a hard time finding consistent info for the 400m specs. I have a 2018 340i xDrive - I’m fairly certain it’s a square 18x8 but still iffy on the offset. Is it safe to assume they’re +34?
I had the HR 13mm spacers and yea they wasn’t fun to remove after a year
Had to remove my HR 13mm today...what a pain in the a##.
@@Verknechter Mounted with grease ?
Best recommendation for xdrive ?
The front tyre gap on my e60 is 15mm and the rear wheel gap to fender is 20mm. The rears are further in. What spacers would be best 5mm front and 15or 20mm rear? I want the rears to have more poke but not that it sticks out the fender arch like in your video. I want the rears to stick ot staggered compared to the fronts. Do I leave the 15mm gap at front and go for 15 or 20mm just on the rears? Let me know which ones you would go for to give it the desired look. I am on the original 17’s but lowered 30mm only. Please let me know
Contemplating if I want to do 12F/15R or 12F/18R... My only concern is if the 18R would rub on my car with 403m on H&R super sports
Hey was looking at putting spacers on my f30 but mine looks way lower than that car from factory would it catch on the side it’s 26.5 inches on the back from the ground and 27.1 inches on the front and 19 inch rims
hi f30 320i XDRIVE possible to instal spacers? thank you
Can you send me a link for the mud guards please
Which spacer size would be the best for an 323i e46 where the wheels come out just a tiny bit past the body.
But what if I want to use j8.5 et35 and j10 et25 R19 tires/wheels!?!?
What wheels are those on the blue car intro?
Great tips! I Have F10 M sport , I agree, 12mm rear is safe but definitely want to go 15 mm
Why are 10 bad for the back? But 15 are okay? 15mm is larger
@@TwinsTubeTV beats me, dawg
I think always first lowering and then see if you want Some spacers
Why's that? I'm thinking of doing the opposite
what can happen if the bolt of the rear toe arm is tightened with a torque more than 100 nm ?!
What would be recommended for good setup on an xdrive 435? Looking for the 18mm R and 12mm F look. Would it be the same or is the spacing different?
Did you do ?
Wow! Thanks josh! 😂 I’ll go 10s and 12s
Bryan what about thoes stock rims ? I need them
I have 19 so I will take your advice with 12/18 and lower the car thank you
thank you so much!
I don't get why 10 mm in the rear is bad? Like how does 2 mm difference with the 12 mm make it safer?
What about 5mm front and rear !?
One thing about spacer or different offset to make tyre poke the car tend to drive weird not very enjoyable well my own experience anyway...
Crazy that BBS is filing Bankruptcy
Doesn't really mean anything, though... It's the 3rd time they've done it in 13 years. Just filing for protection.
Dude! You been working out?
Why not 10 on the back???
Instantly reduces horsepower by 40%
This dude bouta have me spending hella money when i get rid of this 3 series for a new 440i🤦🏽♂️😂
"Here I am. Send me." !
Hi is there a number where I can call and ask someone questions. I bought bmw rims but they don’t fit
Need the right spacers and some help if possible
Are spacers necessary?.
How do they help?
Mainly fitment purposes and no they are not needed
Link to studs?
I find the studs with Blue LocTite back out at 25 with the lug nut. At least one per wheel will back out.
Anyone else?
How much does this cost ?
For 4 spacers and stud conversion, it was $372 shipped (from Kies). Going to be money well spent. And, while I was ordering those, I decided to buy Bootmod3 from them too! Can't wait!!