Making a Simple Steel Gate
HTML-код
- Опубликовано: 10 фев 2025
- We are redoing our pool area and I wanted to make a simple metal gate for it. This was my second big welding project and went a lot faster than the first time a made a gate. I fabricated the frame, welded the sheet metal to the frame, then mounted it. The gate is finished with Penetrol to hopefully slow the appearance of rust. I also used a self-closing spring.
Wanna do this back at home. I have yet to buy the welding machine but, I need to do this. You made this easy to follow and copy.
Nice work! That turned out great!
You done great job there, l was a coded pipe welder years ago, l have just made a metal door for my shed similar to yrs, l used a Parweld XTS 143 inverter welding set using 2.5 Bohler rods, l also use it to do Tig welding. But yea, good work keep it up. 👍
Thanks!
Thank you for this video. Is all I wanted 👌👌👌👌👌
Good work
Good job
cool !!!
Nice work!
What thickness of sheet did you use?
Good Work.
Please tell about your welding machine and accessories,
Thanks
Great job I’m actually looking to make one for my dad just like that
What gauge sheet metal should I use for a gate ? Is 20 gauge ok ? Thank you
Amen
Interesting idea for welders. I'm a welder too. Like
I ALSO WANT TO LEARN WELDING.
Do it
Yes
Bom trabalho 👍
What sort of welding is this ?
Mig
@@mepro123 कितने रुपए का है
Good jobe sir very very nice vedio India
Is that a hot rolled or cold rolled sheet metal.
Hot hot hot!
With a mig we must go ahead no?
Avec un mig on n'est pas censé pousser la soudure et non pas tirer? Sjr les angles il descend c'est normal??
Yes, it’s a mig welder.
en théorie il faut uniquement pousser,
en pratique tant que tu fait pas dans la charpente métallique ou des pièces vraiment sensibles,
tu peut te permettre de tirer tant que tu assure une bonne pénétration yaura aucuns soucis
le problème c'est que t'aura une moin bonne protection gazeuse en tirant, donc plus de risques de soufflure etc et comme ton angle est pas le meme tu apporte ton metal différemment mais en général ca tient sans problèmes
apres la oui jai jamais vu des "montantes" tirées on voit pas les soudures de pret donc je peut pas trop mavancer mais en france dans bcp de boite on fait encore des descendantes alors que c'est plus pratiqué dans pas mal d'autres pays donc bon niveau soudure pas catho on peut pas trop trop parler...
Can't use mig welding with gas in windy conditions the gas needs to shield the weld.
How did you make The box for the door knob
I actually bought it. Search 'Gate Lock Box' on Amazon. $20.
What type of paint did you use? Glossy paint or chrome effect?
No paint. I used Penetrol.
That would be a great job for me to use my everlast mig welder on. Simple but effective gate.
Mark Stevansen wow, your just an everlasting lover. A shill maybe even, you must work in their pr department. I’m just saying that you love your everlast on almost every welding video under different names.
Another everLast spam
@@stevehall8227 Apparently the everLast in Not good enough to sell itself so they hire people to spam all the welding channels. Sad.
How thick is the steel plate?
16 gauge. Very happy with that thickness. Gate has seen heavy use and no dents or dings.
Te quedo muy bien. Disculpa me puedes decir que máquina soldadora tienes
Cool video, what kind of welder are you using? You using gas?
Thanks! Hobart Handler 190 and I'm using argon.
Vmaul20 what kind? Definitely not stick welding
Sweet, I use a Miller 180, I do the same stuff
@@mepro123 For mig mild steel you should be using CO2/Argon mx CO2 helps the arc be stable . Argon only is for TIG welding
I also a welder I like
why he is using square tubes for door and windows? where is the LTZ ??
LTZ?
Замок конечно оригинально...
What was the rod you use to help you weld the sheet metal
It was just a piece of round stock I had. Always helps me connect pieces when I've got a big gap.
sir hmare steel gate ka jo steel clip jo k dono gates ko bnd krne k bad lock krne se pehle lgate hai woh bhut hard ho gya hai war war hard ho jata hai kaise thik kiya jaye please btayiye..mene oil v lgaya lekin woh shi nhi ho rha
Why is the Handel so high
Minimum height for gates that open to pools. To prevent children from drowning.
Makes sense 👍
What kind of these welding machine...without using welding rod...i want to know more about these type of machine.
It is a Hobart Handler 190 MIG welder
@@mepro123 im from phillipines how much is the price of this machine..thanks in advance
Welder is about $700. You'll need gas and wire plus gloves and mask. Grand total is probably about $1000. Not sure how much shipping is in your case.
@@mepro123 how does it cost I am in kenya
hinges of that type on outside so security was not the reason for gate then
Security wasn't a huge priority. If you look closely, the hinges are oriented opposite from each other so you can't simply lift the gate up and move it.
The way I look at it, it would be much faster to just hop the fence than to disassemble the gate!
@@mepro123 what do you call that hinges? or can you send a link of a picture?
@@VirtualRonnie they are called barrel hinges.
Is Welding ka nam?
Mik welding he bhai
Co2, mag ,mig calling 3types name
I'm guessing 81in and 6 ft
Gate is about 4' wide and 6' tall
@@mepro123 Nice not to bad
от мастер👍
روعه 👍👍👍👍👍👍👍👏👏👏👏👏
مشاء الله عليك
Can I get the dimensions of the pipe and the overall door? Please it will help me so much
The square tubing is 1-1/2" 16 gauge. The sheet is also 16 gauge. Approximate dimensions are 44" x 70"
Magkano Labor po niyan?
its not squared...
On something like this, there is such a thing as close enough 😀
what gage is the sheet metal?
16
ماهر جدا
Is there any body who could drop a quick list of tools needed for this type of project tagging me (other than the tubing and an angle grinder) what type of welder (mig, spot, etc) I have no idea about welding, mig and spot could be the same type of welding machine (I’m completely new to this welding game) or link some other RUclips vids, thanks in advance for any help ❤️
Mig Welder. The hinges are called tube hinges. I used 16 gauge hot rolled steel (sheet metal) for the sheet.
So much noise with an angle grinder and no ear protection? Very bad for the ears.
I’ve got low profile muffs on. You can actually see them on the video thumbnail if you look closely.
Это где замки на уровне головы ставят?
Camera man verrrrrrrry bad Video is not current but nice work
Bad Work. without efficacity
Good Work.
Please tell about your welding machine and accessories,
Thanks