②wired to wireless settings for wireless nvr kit

Поделиться
HTML-код
  • Опубликовано: 2 авг 2016
  • wired to wireless ,take away switch
  • НаукаНаука

Комментарии • 22

  • @simplediagnostics
    @simplediagnostics 7 лет назад +1

    Hi,
    Does this work with only Hiseeu cameras or other brands as well?

  • @marianoezequiel2440
    @marianoezequiel2440 4 года назад +1

    After unplug the RJ45 from the Cameras the NVR desconnect the cameras. why ?

  • @allinonetelugu4404
    @allinonetelugu4404 6 лет назад

    sir should i buy hard disk spratly or will i get in the box of set, if i should buy please send me the details of the hard disk which i have to buy

  • @jfmogro
    @jfmogro 7 лет назад

    hye i have the same but the cameras have a duplicate ip :(

  • @donaldom9903
    @donaldom9903 6 лет назад +1

    Hi i have a similar system to this , just bought it off ebay, its a wi fi system with the same cameras, which can work wired,, my problem is,, one of the cameras need to be wired,, the nvr box has one space for internet connection,, my router has one spare place for another 1 lead,,,,, where do i plug the ethernet cable from my camera into, ??? thks

  • @johnmateus7289
    @johnmateus7289 6 лет назад

    I've installed this system at home and not happy with it. When tiring to see the recorded files, system is telling me that the HDDs is not found. Any body to help? Also is there any thing else that as to be setup on NVR.Regards

    • @joeydelmarsjr.646
      @joeydelmarsjr.646 5 лет назад

      lol it means it doesnt have a hard drive in it to use to record. if in fact it does have a hard drive then format it so it can be used. if it does not let you format then the drive is dead and you need to install a new 3.5in HD

  • @nfsmexico
    @nfsmexico 6 месяцев назад

    configure las camaras individualmente con la app EseeCloud, para poder utilizar repetidores wifi. El NVR reconoce todas las camaras con protocolo N1, pero muestra "error de contraseña" y nunca configure contraseña con la app EseeCloud, alguien sabe que contraseña asigna esta app a las camaras?

  • @darylhockin8088
    @darylhockin8088 3 месяца назад

    maybe if you spoke it would be ok

  • @giorgiograsso3592
    @giorgiograsso3592 7 лет назад

    Hi, it's possible connect 2 cameras wireless and 2 cameras wired?

    • @HiseeuOfficial
      @HiseeuOfficial  7 лет назад

      Dear, the kit's camera you can use two cameras connect with lan cable, two cameras use wifi , it is OK.

    • @sandyande
      @sandyande 7 лет назад

      Giorgio Grasso hi I'm trying to get 1 camera wired and 3 wireless can only get wireless to work not wired did you have any success cheers sandy

  • @jerrydriscoll4147
    @jerrydriscoll4147 7 лет назад

    I need some help hooking these up, can I email You?

  • @mrhfz8213
    @mrhfz8213 6 лет назад

    How to configure router for this situation

    • @HiseeuOfficial
      @HiseeuOfficial  6 лет назад

      no need configure route,just connect the NVR to router via LAN Cable

    • @joeydelmarsjr.646
      @joeydelmarsjr.646 5 лет назад

      @@HiseeuOfficial is that a special poe switch or just a standard switch or hub?

  • @BelleRuza
    @BelleRuza Год назад

    Não estou conseguindo conectar uma de cada vez!! Não tenho cabo de internet para conectar todas de uma vez!

    • @BelleRuza
      @BelleRuza Год назад

      Tem alguma dica para dar certo?

    • @HiseeuOfficial
      @HiseeuOfficial  Год назад

      Olá, pode fazê-lo através de wi-fi

    • @HiseeuOfficial
      @HiseeuOfficial  11 месяцев назад

      @@BelleRuza pls check the article:
      www.hiseeu.com/a/help/article/27652