@@hyperdashgarage I bought mine with the nibbi intake included. Unless there is a few different intakes. It just seemed it didn't want to fit without hitting the motor. Ill give it another shot. Is there a specific nibbi manifold? Looks like there are a couple different available. Thanks!
@hyperdashgarage You may have already figured this out but just in case I thought I would post it here for anyone else. The Maddogs run out of fuel at wide open throttle due to the vacuum operated fuel pump. When at wot the engine has very little vacuum so the pump doesn't send enough fuel when you need it most. The same reason cars have a vacuum canister to operate the brake booster.
Wheres part 1? Did you need an adapter flange or were you able to just use the nibbi intake to mount it? Mine seems to not fit.
You need the nibbi intake to make the nibbi carb to fit because the carb will not fit with the stock intake
@@hyperdashgarage I bought mine with the nibbi intake included. Unless there is a few different intakes. It just seemed it didn't want to fit without hitting the motor. Ill give it another shot. Is there a specific nibbi manifold? Looks like there are a couple different available. Thanks!
@@tiredofinsanity NIBBI RACING PARTS Replacement... www.amazon.com/dp/B01MDUXULG?ref=ppx_pop_mob_ap_share
This is the one I used
@hyperdashmotorbikes4417 that's the one I have. Thank you so much!
@hyperdashgarage
You may have already figured this out but just in case I thought I would post it here for anyone else.
The Maddogs run out of fuel at wide open throttle due to the vacuum operated fuel pump. When at wot the engine has very little vacuum so the pump doesn't send enough fuel when you need it most. The same reason cars have a vacuum canister to operate the brake booster.
Man I really want one but I got zero knowledge on shit like this hahaha
35 145 is my set up. I have a 28mm nibbi and I'm running 80mph
A lot of other things done to your bike also right?
what was the top speed with the new carb?
I can hit around 60 much easier and faster now… it feels like that’s the max for the bike right now
Why the aftermarket throttle cable? Because of the new carb?
Because the stock cable is not compatible with slide carbs
Thinking about grabbing the nibbi carb setup, what kind of cable am I looking for since it’s a slide carb? 🤘🏻
@@claytondubich8161 you want the nibbi throttle cable
Stock motor?
Stock motor with bolt ons
@@hyperdashgarage are you running pwk oko carb or a nibbi?
Nibbi but I also have an oko in my garage I’m gonna use in the future
@HyperDash MotorBikes when you ran the oko did you change the jets and stuff
You have to change jets or at least tune the carb almost every time you upgrade it