We have tilt wheel and telescopic steering in cars. They need telescopic handlebars built Factory on a bike. So you could just pull a knob and Slide the handlebars up and down to your desired location. It would solve the problem if they had Factory telescopic handlebars
Is there any input in regards to the change of handling (if any) of the motorcycle being that the helibars are raised up and pulled back for more of a comfortable riding position ?
I have these on my CBR600RR and I can say it has improved comfort. BUT they have affected the way I ride as well. The position of your elbows in full tuck is very uncomfortable because your forearms no longer lock into the channel on the tank. Cornering is much different now and I feel like I am sitting way higher up in the bike and have lost some confidence. Maybe I need to give them a little more time but that is my initial reaction.
Unfortunately, we do not have any HeliBars to fit your 2012 R6. Instead, I highly recommend riser clip-ons from Woodcraft. Your clamp size should be 50mm. You'll have to take measurements from your stock clip-ons to your fairings to gauge clearances. -DrewZilla *www.revzilla.com/motorcycle/woodcraft-riser-clip-ons-with-78-bars
07 R1 , most clip on replacements I have found do not accomodate the stock steering damper or the other bits that hang off the original clip ons can you help or suggest an alternative
Hi revzilla, I’m interested to get Helibars for rninet racer. But I can’t get any user reviews on how much improvement it gives when it comes to comfort. And also the difference compared to rninet pure regular bars difference in feel. Thank you
RevZilla thanks for the reply. Even not personal experience if Incase you guys heard any kind of feedback from customers or friends who had an experience thank you
Unfortunately, HeliBars does not make any system to fit the R15. However, you might be able to use riser clip-ons if you take proper measurements of the bike's cockpit. See the instructions on the page below. -DrewZilla *www.revzilla.com/motorcycle/woodcraft-riser-clip-ons-with-78-bars
There aren't any Helibars for the 06 ZX6R unfortunately. Instead, you might consider Woodcraft riser clip-ons. -DrewZilla *www.revzilla.com/motorcycle/woodcraft-riser-clip-ons-with-78-bars
so that's cool and all, but when I punch in my CBR500R it brings me back to the features page. So I manually went through every page of Heli bars on your site and didn't find the 500r. I know they make them for my bike. Do you guys sell them for the 500r? if so, can you get someone to fix the page please.
+Myztkl-Kev BOOM! Ask and ye shall receive. The page for the CBR500R is now live. Thanks for letting us know! -DrewZilla *www.revzilla.com/motorcycle/helibars-honda-cbr500r-2013-2016
I'd recommend Woodcraft Riser Clip-Ons. Take a look at the measuring guide linked on the product page to determine how much riser clearance your bike will allow. As for clip-on size, the 2004 CBR600RR would use 45mm diameter. -DrewZilla *www.revzilla.com/motorcycle/woodcraft-riser-clip-ons-with-78-bars
If you want your clip-ons to be higher, I'd recommend Woodcraft Riser Clip-Ons. You will need to follow their instructions to determine your clearance with the fairing, so that you find the appropriate riser height. -DrewZilla *www.revzilla.com/motorcycle/woodcraft-riser-clip-ons-with-78-bars *www.revzilla.com/assets/0001/4921/woodcraft_clip_ons.pdf *www.revzilla.com/assets/0001/4922/woodcraft_clip_ons.pdf
No, these are not available for the Ninja 300. You might consider Woodcraft instead. -DrewZilla *www.revzilla.com/motorcycle/woodcraft-clip-ons-with-risers-kawasaki-ninja-300-250r
Great video guys! just a quick question about the helibars, im a 6ft 2 110kg (240lbs) all australian man trying to fit on a tiny 1000cc jap superbike, i test rode the R1 and was in unbearable wrist pain from the low aggressive positioning of the bars which forced all my weight forward onto my wrists, braking just further added to the misery. It was so bad i couldnt get that bike back to the dealer quick enough. This broke my heart as i had my heart set on the new R1. So my question is, are helibars going to make a significant enough difference for a man of my height and weight to get me back onto my dream bike???
I don't believe we have HeliBars to fit the new R1. If they do make them, it might be enough to make a difference, but if you aren't riding on the track, you may want to consider the more upright MT-10 from Yamaha. -DrewZilla
Installed a HeliBar riser on my Honda Pan European. Easy to install and has really improved my riding position.
Excellent job explaining that they're a total solution package not just one piece of the puzzle!
Dude....i have a 16" beard, does this mean i can rebuild my engine on my R1?
We have tilt wheel and telescopic steering in cars. They need telescopic handlebars built Factory on a bike. So you could just pull a knob and Slide the handlebars up and down to your desired location. It would solve the problem if they had Factory telescopic handlebars
Interesting idea 👌
I need to find some kind of solution to my FTR Carbon and it's terrible bar geometry. I'd love even just basic clippies.
Is there any input in regards to the change of handling (if any) of the motorcycle being that the helibars are raised up and pulled back for more of a comfortable riding position ?
With less weight on the handlebars, the steering tends to feel a bit lighter. -DrewZilla
hope to find riser and bent over to the driver also for a vulcan S 650 . dealers ?
Does this fit for 2020 R6?
Hi! Is there an option for a 2018 Yamaha R6? Thx!
heli bar for vulcan S to bring it up and forward ?
I have these on my CBR600RR and I can say it has improved comfort. BUT they have affected the way I ride as well. The position of your elbows in full tuck is very uncomfortable because your forearms no longer lock into the channel on the tank. Cornering is much different now and I feel like I am sitting way higher up in the bike and have lost some confidence. Maybe I need to give them a little more time but that is my initial reaction.
Has anything changed in 5 months?
@@devinwile5063 I’ve gotten used to them and now can’t imagine riding without them. Lol. Rode my buddies cbr. Same generation and it felt weird.
@@EyeForKnowledge. Thanks for sharing!
@@EyeForKnowledge. valuable update thanks
Yea just gotta lean a little different cornering
Hi Revzilla Team, Do you guys have any handle bar raisers for CBR650R? I was not able to find any, pls advice. Thanks in advance.
I'd love to try a set on my Harley but at $695 I'll keep looking.
mchristr yess but... Would you really trust a $200 set of handlebars that are your only method of controlling the bike at 150+ mph?
some company needs to invent a conversion kit for sport bikes that lifts the handle bars way up like a cruiser bike.adjustable that goes up and down
Can I get helibars for a 2004 Yamaha r6??
i cant stand being layed down over the tank, so these help a alot.
I've been looking into getting clip-on risers for my 2012 r6, I've been a bit concerned with the compatibility. any help would be appreciated.
Unfortunately, we do not have any HeliBars to fit your 2012 R6. Instead, I highly recommend riser clip-ons from Woodcraft. Your clamp size should be 50mm. You'll have to take measurements from your stock clip-ons to your fairings to gauge clearances. -DrewZilla
*www.revzilla.com/motorcycle/woodcraft-riser-clip-ons-with-78-bars
Awesome, I appreciate your response. Thank you!
07 R1 , most clip on replacements I have found do not accomodate the stock steering damper or the other bits that hang off the original clip ons can you help or suggest an alternative
I have not been able to find an alternative option for you unfortunately. As you said, there's a lot of interference to try to account for. -DrewZilla
I need some for my gsxr 600 2007
Hi revzilla, I’m interested to get Helibars for rninet racer. But I can’t get any user reviews on how much improvement it gives when it comes to comfort. And also the difference compared to rninet pure regular bars difference in feel. Thank you
Unfortunately, we haven't used the specific HeliBars for your bike, so we cannot offer any personal experience either. -DrewZilla
RevZilla thanks for the reply. Even not personal experience if Incase you guys heard any kind of feedback from customers or friends who had an experience thank you
You might reach out to members of one of the R nineT online forums to see if any of them have some personal experience. All the best! -DrewZilla
Daytona675r?
I want to rise up my handle of my R15 V3 Indian Version.Please give me a helpful suggestion.
Unfortunately, HeliBars does not make any system to fit the R15. However, you might be able to use riser clip-ons if you take proper measurements of the bike's cockpit. See the instructions on the page below. -DrewZilla
*www.revzilla.com/motorcycle/woodcraft-riser-clip-ons-with-78-bars
Would love these for my CBR1000RR, but with exchange rate I'm looking at AUD$600 :(.
Are there any helibar options for a 2006 zx6r? I’ve tried on the site and came up with nothing
There aren't any Helibars for the 06 ZX6R unfortunately. Instead, you might consider Woodcraft riser clip-ons. -DrewZilla
*www.revzilla.com/motorcycle/woodcraft-riser-clip-ons-with-78-bars
is there an option for my 2001 Yamaha yzf 600 r
No, HeliBars does not make a version for your bike. -DrewZilla
Are there raisers for the ZX 6R
yes
@@sir.636 ty
so that's cool and all, but when I punch in my CBR500R it brings me back to the features page. So I manually went through every page of Heli bars on your site and didn't find the 500r. I know they make them for my bike. Do you guys sell them for the 500r? if so, can you get someone to fix the page please.
+Myztkl-Kev BOOM! Ask and ye shall receive. The page for the CBR500R is now live. Thanks for letting us know! -DrewZilla
*www.revzilla.com/motorcycle/helibars-honda-cbr500r-2013-2016
+RevZilla awesome, thanks much!
Looking at these for my 2012 cbr 1000rr are they compatible?
HeliBars does make some for your bike, but we don't currently carry them. You'd have to get them from HeliBars directly. -DrewZilla
RevZilla thank you very much sir
You're welcome!
Any suggestions for 2004 honda cbr600rr to raise handle bars?
I'd recommend Woodcraft Riser Clip-Ons. Take a look at the measuring guide linked on the product page to determine how much riser clearance your bike will allow. As for clip-on size, the 2004 CBR600RR would use 45mm diameter. -DrewZilla
*www.revzilla.com/motorcycle/woodcraft-riser-clip-ons-with-78-bars
I knows it's a old post but, does anyone know what kind of icon jacket that is in the background
That's the now-discontinued Icon Overlord Prime Leather Jacket. -DrewZilla
Dear sir... any option for r15 v3...
Unfortunately, it seems HeliBars does not make any options for the R15 v3. -DrewZilla
Get yourself a set of ConvertiBAR Fully Adjustable Clip-on Bar Risers
Do they have an option for 2016 Zx6r ? I can't find it
Unfortunately, I'm also not seeing an option for your bike. -TeamZilla Chris
For R15 is that suitable ...?
Currently there is no option for the R15. I apologize for the inconvenience. -DrewZilla
Option for rc390 ? Ktm ?
No, there are currently no options for KTM. -DrewZilla
😂🤣
Any suggestions for an 2007 R6?
If you want your clip-ons to be higher, I'd recommend Woodcraft Riser Clip-Ons. You will need to follow their instructions to determine your clearance with the fairing, so that you find the appropriate riser height. -DrewZilla
*www.revzilla.com/motorcycle/woodcraft-riser-clip-ons-with-78-bars
*www.revzilla.com/assets/0001/4921/woodcraft_clip_ons.pdf
*www.revzilla.com/assets/0001/4922/woodcraft_clip_ons.pdf
please give an option for yamaha R15(Indian model)
Unfortunately, there is no option for that bike. -DrewZilla
Motorhead! 🤘🏻
Any chance these are available for the Kawasaki Ninja 300? 2018?
No, these are not available for the Ninja 300. You might consider Woodcraft instead. -DrewZilla
*www.revzilla.com/motorcycle/woodcraft-clip-ons-with-risers-kawasaki-ninja-300-250r
Great video guys! just a quick question about the helibars, im a 6ft 2 110kg (240lbs) all australian man trying to fit on a tiny 1000cc jap superbike, i test rode the R1 and was in unbearable wrist pain from the low aggressive positioning of the bars which forced all my weight forward onto my wrists, braking just further added to the misery. It was so bad i couldnt get that bike back to the dealer quick enough. This broke my heart as i had my heart set on the new R1.
So my question is, are helibars going to make a significant enough difference for a man of my height and weight to get me back onto my dream bike???
I don't believe we have HeliBars to fit the new R1. If they do make them, it might be enough to make a difference, but if you aren't riding on the track, you may want to consider the more upright MT-10 from Yamaha. -DrewZilla
Always love a Lemmy review.
Show us!!!!