MOTU M4 & M2 USB-C Audio Interfaces Overview
HTML-код
- Опубликовано: 15 окт 2024
- More videos like this MOTU audio interface overview 👉 • Studio & Recording Ove...
Shop for the MOTU M2 audio interface at Sweetwater 👉 www.sweetwater...
Shop for the MOTU M4 audio interface at Sweetwater 👉 www.sweetwater...
Looking for a high-quality audio interface that won’t break the bank? The MOTU M2 fits that description. These compact USB-C audio interfaces include ESS Sabre32 Ultra DAC technology for top-shelf sound, along with optimized drivers that yield impressive low-latency performance. Two great-sounding mic preamps include individual gain adjustment and phantom power, while 1-touch hardware monitoring ensures smooth tracking.
#Sweetwater #MOTU
The Zoom F8N Multitrack Field Recorder was used to record the audio in this video, and can be purchased here: www.sweetwater...
This guy gives the most efficient reviews. No messing around. Straight to the point in every feature.
Short story: I started looking for a new interface that wouldn’t break the bank about 2 months ago. When I saw the M4 on Sweetwater’s website I knew the search was over. Thank you Mitch & team for providing a solid overview video- even if I watched it after ordering ;)
When I was first getting into studios it was MOTU everything. Since then I have seen a lot of other companies build on massive PR campaigns and offer over hyped overpriced gear to pay for it.
I have used a few less expensive Audio Interfaces over the past few years just as a way to get my ideas recorded, and have been underwhelmed as everyone is selling the same thing with a different coat of paint.
The M2 is the best $150 interface by far. The ESS Sabre32 DACs are incredible! The headphone output is loud. The 5-pin MIDI connectors and the life saving Loopback feature put this interface so far ahead of the class it’s not even close. Long live MOTU!
I’ve owned the M4 for about 6 months now and it’s incredible. I can’t believe this interface sounds so good and has all these features for such a low price. The preamps are loud and clean. Loopback feature is super useful too.
How much did you pay ?
@@engincaglarofficial buy from thomann
@@apj.-.-.-.-.-.-.-119 thanks very much,
I bought one. On its way
Our local music shop loaned me an M4 because the Zen Go interface I bought was rattling inside like something lose.I loved my 'loaner' so much I bought a new one last week amazing sound quality,clear and rich!
I was going to pick up a Scarlett but now I'm going to get one of these because I see such positivity and support in the comments from the company that makes these. When people have issues and they voice them in the comment section they often reply themselves. In this day and age of Silent companies well that matters to me.
Bought the first unit that came into my local music store after checking every day for a month and it is absolutely fantastic !! Love using the loopback feature to sample into Maschine !!
👀
This thing kills all other audio interfaces on this price range... Im sold!
@German Bueso
Not really!!
New2day User what do you recommend is best for < $200?
@@new2dayuser151 What is better then? Motu M4 is slightly better than Focusrite Scarlett 4i4 in my opinion
@@ArtyShat You could go Lynx, powerfully tried and true interfaces!!
Let's see, go grab one of the RME HDSP interfaces, their Almighty as well as Lynx products!!
Let's go back in time, if their still around and supported, the heavenly Apollo Twin or the
Rockzilla Apogee Duet, Wow, mean stuff right there, brother!!!!! There's many more to mention, these will do for now!! Keep making music and have fun!!!!!
@@danielvelkovski3156 +;Behringer, check them out, depends on how many ins and outs you need
If they offered an M6, M8 or M10 in this format, I would consider buying it.
MixingGBP For that you might want to look at the Ultralite Mk4 or one of the 828ES interfaces
M6 Is Out Now.
Thanks for your review of the Motu M2! Question please. I recently bought the Focusrite Scarlett 4i4 3rd Gen audio mixer for $229. Do you think the comparable Motu M4 mixer for $219 is "better" than the the Scarlett 4i4 in terms of feature set and audio quality? The Scarlett 4i4 does have a Loopback feature via the Focusrite Control app so I don't know if that makes any difference to you (the Scarlett 2i2 doesn't have that, I don't think). Also the Scarlett 4i4 has the "Air" feature. Anyway, I'm within the return policy period for my Scarlett purchase so I can exchange for the Motu M2 or M4 units. But unfortunately, both of those Motu mixers are out of stock and back ordered everywhere, so maybe this is a moot point? I'm using the Shure SM58 mics and the Audio Technica AT2005 mics (both dynamic mics) so I don't know if that makes any difference. But I notice if I crank up the gain dial on the Scarlett 4i4 mixer to maximum, there is positively a noticeable humming/hissing background noise. If I crank up the gain dial to maximum on the Motu mixer, will it produce the same amount of background humming/hissing noise compared to the Scarlett mixer? Your thoughts on this?
At this point, you're splitting hairs. The MOTU is a great interface, but so is the one you got. I think it is worth it for you to keep your Scarlett and start making music, rather than waiting a long time for something that's on backorder, because it *might* give you a slight edge. I am telling you right now that the difference you'll get is something that you won't be able to hear when you work with these. There are far more important upgrades you could do to your setup, rather than worrying about your interface, and that goes for everyone. Except f your interface is crap (but the Scarlett is most definitely not) As for your question regarding the hissing: Yes, any interface will be hissing if the gain is maxed out. At least for people like us, working from our bedroom. However, at max gain you will probably have more important issues. I doubt that your signal won't be clipping at that point
Was about to go with the focusrite Scarlett 2x12 but I think I just found my new audio interface
What is the best audio interface Motu m2 or Audient id14? Please help me to choose! 🙏
M2 for better DAC... ID4 for better pre.... M2 for overall performance including low latency
@@akashr1370 Thanks, I already bought the M2 a month ago
Great review and simple and straightforward explanation of the features. I have a couple of questions, though. I realise that this video was released more than two years ago, I just wondered if the MOTU M2 and M4 are supported on the latest M1 / Apple Silicon MacBooks yet (and by extension macOS Monterey)? Second question (and apologies if it's been covered elsewhere) the second pair of outputs 3 & 4, are these independent of the main outs 1 & 2 i.e not a duplicate? I have a use-case where I'd like to configure 3 and 4 as hardware effects sends out of my DAW (Reaper). Thanks in advance!
With these being USB audio class complaint that means they'll also work on Linux. I like being able to select phantom power on each channel.
Hey. Fancy seeing you here!
@@Podcastage Why hello there. Nice looking interfaces, aren't they.
Sir Nigel Cogs Gaming something tells me we’ll find out in a few hours. 😉
Does the software work on Linux too?
Will they work on Android?
Great, I just found my new USB audio interface.
check on the Tascam 102i, too ;-)
@@olafkliemt1145 m2 is still better
usb-c
Great review. I saw this when I ordered my M4 and my son bought the M2. We use GarageBand with these on our Macs and they work really well! Sorry I didn't do a review sooner!
I already have this interface but I watch these reviews to validate my purchases even more lol.
Many interfaces promise very low latency, but once you decrease the samples to anything lower than 128, many of them start acting up. There is no way to really know how low latency you really can get.
I know it depends on your computer, but a standard for an apples to apples comparison would be pretty cool.
Glenn Fricker from spectre sound studios compared 5 sub-$200 interfaces and showed first hand that some perform way better than others.
How does this compare to Audient and PreSonus?
Nice review and thanks for it! I have a question, on the M4 are the input 3 and 4 always linked as a stereo pair or could they be used as 2 separate mono input?
Hi, Paolo. Great question! You could use the M4 Line 3/4 inputs as mono or stereo. Let us know if we can help with anything else. Thanks!
Jason Filloramo, Sweetwater Sales Engineer, (800) 222-4700 ext. 1281, Jason_Filloramo@sweetwater.com
@@sweetwater thanks for the reply this is really helpful, I think I might go for this interface now
Buying one of these ASAP, nothing but great reviews, ratings and specs on this little gem.
Had my 2nd gen scarlet for about 5 years, still works fine but thinking about upgrading, hopefully this is a good replacement for it
what kind of headphones should I buy for these units? 32, 80 or 250 ohms? :)
Hello, Pablo! The headphone amp aboard the M4 and M2 interfaces will support 32 ohm and 80 ohm headphones no problem, but an additional higher gain headphone amp is recommended for 250 ohm headphones.
Thanks for the interest!
Cody Kraus, Sweetwater Sales Engineer, (800) 222-4700 ext. 1766, cody_kraus@sweetwater.com
I feel like Mitch, Don, and "the Brit guy" are my friends even though I never met them. ;)
Now, THAT'S a Review!!!!!
Is the input monitor mix worth the extra $70? Could't you add a gain plugin on the vocal track to adjust?
I don't know what audio interface you are using to record your videos but that blows everything else out of the water. One other thing is I wished to see the Motu 4 in action with different settings but I haven't.
Will this connect directly into my MacBook m1 2021 14inch ?
Hey there! Yes, any of those interfaces will certainly plug straight into your MacBook M1. The interface comes with a standard USB A cable, so you may have to get a USB C to USB C cable in order to properly connect into that newer Macbook.
I hope this helps!
Nick Pasquino, Sweetwater Sales Engineer, (800) 222-4700 ext. 3230, nick_pasquino@sweetwater.com
Finally Made in USA
I take it there is no independent hardware volume control for input 3&4 to the monitor output so you use it as a line and microphone standalone mixer?
the Loopback feature will save you US$99 for Loopback software to livestream or teleconferencing.
So this will be powered by the ipad pro (USB-C) and function as expected? Or will it need an additional power source via a hub of some sort...
For iOS use, power is required via an adapter or hub. For iOS devices with a Lightning port, an Apple Lightning to USB3 Camera Adapter is required.
Is this good and compatible with gig performer,?
THANKS for this review!!!!!!
I'm thinking about replacing my "old" Motu audio express with the M4 model, would I have the same audio quality? Do these new devices use the same preamps (or even better)?
Hey, Michele! Great question! They are using their same fantastic preamps. However, their conversion has been improved, and, if I might add, they've done a fantastic job with it. I'd love to chat with you more to see if this is the right interface for you!
Rock on! 🎶🤘
Cassie O'Hanlon, Sweetwater Sales Engineer, (800) 222-4700 ext. 3020, cassie_ohanlon@sweetwater.com
@@sweetwater THANK YOU!!Ok,
I will buy the m4 to replace the audio express :)
Should i go for the m4 just for the direct monitoring mix knob?? Or can that thing be done in the software itself for the m2, I'm confused between m2 and m4,and the maybe the mix knob is the deciding factor,would love to know your opinion
Hi, Professor Lethal. Great question! The most significant difference between the two interfaces is the extra two inputs and outputs on the M4. The input/playback mix knob is a factor too, but not as important as the inputs/outputs.
Feel free to reach out with any other questions. Thanks!
Jason Filloramo, Sweetwater Sales Engineer, (800) 222-4700 ext. 1281, Jason_Filloramo@sweetwater.com
@@sweetwater thank you, gonna get the M4 now
awesome! i had a MK2 years ago, one of the only pieces of gear i regret having to sell. nice that i can get back into motu for short change. :D
U mean apollo twin?
My old M-Audio Delta series interface finally gave up the ghost so looking for something to replace it. With the M2 could I listen to RUclips vids and play along with a guitar running through a DAW at the same time?
Thanks for mentioning usb class compliant, I was wondering about that topic. That means this will work on Linux out of the box.
Hi friend, and what about Android devices?...
@@ferdearmas8732 Yes, should work with Android.
@@JonDisnard Thanks!.
Hi
I own M2 . I have Mac Mini M1 8gb ram , also have an external SSD the Samsung T 7 , can i install the Lite performer on my T 7 .
I know the question not about M2 , but this question is nowhere asked in any forums, see if you can help.😊
Which one do you think is best for MOTU M2or FOCUSRITE Scarlett 2i2 3 rd gen
Seems the MOTU is better.
How is the software bundle package on these interfaces?
I love my M2. I can record into my DAW with no latency and clear sound with no noise. The headphone output also has no latency and sounds super clear.
Are these like the 3rd generation Scarlett where they can go from USB-C to USB2?
Hi, Jason. Thanks for reaching out with your question. You are exactly right. They will operate in a USB 2 port at USB 2 speeds. If you have any other questions about this interface or anything else, let me know!
Riley Koenemann, Sweetwater Sales Engineer, (800) 222-4700 ext. 1226, Riley_Koenemann@sweetwater.com
Extremly good information. I wonder why not 3.5mm input jacks are available. The whole world of synths and external gear in the meanwhile is 3.5 mm stereo jack/plug oriented. I know this is an issue for 99% of all usb audio interfaces in the world until today in 2022 with the exception of the TX-6 from Teenage engineering which has 6 stereo, means 12 channels in a 3.5mm hw format.
M2 or Audient ID14? I will just want a nice DI input to record guitars without having a di box.
I'm wondering the same thing! Would use it to record vocals as well though.
Robin Keyaert I bought the Audient, havent arrived yet though. I believe it works well with both motu and audient
I have the same dillema. I just have bought ID14 and I'm thinking that maybe should replace it for Motu, which has better parameters (on paper) as well as Midi. For me the most important is quality of DAC, not sure which one has better conversion.
@@darekk7459 Motu seems to have better DAC, maybe you can try it. I'm happy with the ID14
Will the MOTU work with OS 10.9.5? Thats the deciding factor on whether or not I'll get it. Otherwise, I'll get the Audient ID14 because it supports 10.9.5.. Really wanted this interface too but don't think it supports my OS (I record my music on an older OS because quite a few of my really old plugins aren't supported by the latest OS).
Our driver for this device is suited for macOS 10.11 or higher. If you use USB Class-Compliancy for Mac, it should work on 10.9.5!
Thanks Mitch... but I really wanted to see the back panels:)
is there a way to monitor output 3-4 on the headphones on motu m4
Hello! Do you Guys think it’s compatible with iPad Pro 2018 equipped with USB c port ? Should I expect any issues? All the best.
It's definitely compatible! Check out this link for further information about setup and other recommendations.
motu.com/techsupport/technotes/m-series-ios-power
I'm having trouble with the Audient EVO 8. With WA-87 R2 LD condensor mic -- not getting full level even with preamp the maxed out The headphone level into my earbuds is low and the sound is full of hiss! Was thinking of returning for MOTU M2. Advice?
Wonder if it will work on a M1 MacBook Pro? As I understand, this can either be used for recording into a DAW or stand alone without the computer with an external USB C charger. What kind of power would the external charger require to use this stand alone? I wish they had built in the DC input for stand alone use into the unit itself so that one could have used it stand alone as well as keep a permanent connection to the DAW through the USB C port. Kind of like the MOTU 828MK3 Hybrid that I had some years back. This is the one of the main reasons preventing me from buying this. I do have Apogee Element 88 and 46 but those don't work with the M1 for now and the driver update is only expected in July-August from Apogee. Plus the Apogee Elements don't have a stand alone mode and have to be connected to the DAW always to get sound. That's one of the biggest drawbacks of the Apogee Element units in my view. What other dual purpose Audio Interfaces/ stand alone mixer combinations are available?
How would you say an audio interface like one of these compares to say, a zoom H5 or an H6? If you had to rank a MOTU M2 on a scale of 1-10, and then rank the H5, where would they be? I have a cheap behringer (~$90) at home but I find myself using the H5 for just about everything these days. However, I'm very new to this and don't know if that's silly or not.
MOTU 7, H5 5.
For a Neumann TLM-103, which is a better fit... Scarlett solo 3rd gen or Motu M2? Thanks!
good evening, may i know if your MOTU M4 audio interface device drivers work correctly on windows 10 64 bit? I read many complaints about windows drivers, why all this? why don't you make the drivers correct and stable for windows so you will have more sales about it?
I have all the confidence in our Windows drivers for the M2 and M4 product line. If were to run into trouble, our world-class tech support team is just a phone call away 👍
@@motuTV @motuTV
I have this same problem with windows 10 64 bit using the M2. When you turn it on and go to youtube the voices sound like the voices that you hear when you fast forward a video. You have to turn it off and then turn it on to get it to sound as it supposed to. Then on top of that sometimes while listening it will randomly start lagging and skipping when listening to audio. Also when i open my daw its keeps saying i need 2 outputs even though the interface is plugged in and installed as my source. So i end up having to turn off my computer and turn it back on and then it starts working after that. I called sweetwater and motu customer support and even though both were super friendly and helpful and both reinstalled drivers for me and did other techincal stuff but nothing worked. Its still doing it to this day. I've had this interface for a little over a year and hate i have to go through this. I love the interface but hate the functionality of it. If you can help me fix this I would be greatful
@@BlackGoldSoul If you haven't already, I suggest going through the steps in this link:
motu.com/techsupport/technotes/troubleshooting-windows-audio/
We have also released a new driver update - please make sure to download and install this when you have a moment:
motu.com/en-us/download-center/download/42
@@motuTV ok I will try this in the morning and I will update this if it works. Thanks!
@@motuTV I updated the drivers using the link you shared and its now working perfectly. I wanted to give it some time before I gave my update to make sure this would continue and everything seems to be working great and I no longer have those issues I spoke about in my comment. I really appreciate your help! Thank you again!
The price is great. Can the converters on these compete with a brand like Audient?
Only drawback with Audient is the LACK of a Midi Interface and 50% higher price.
@@LightWingStudios hi. Is the preamp quality better than Audient iD22 which I hear is pro quality.
@@upontheword632 they don't even say what type of preamp it is in the specs
@@LightWingStudios Do you think Audient will refresh their lineup as well?
@@tonylancer7367 i honestly see them updating ID22, 14 and 4, to usb-c... and having the current technology as the ID44
Just ordered one recently! Can't wait to get it
My iPad has only got a lighting port, will this unit work ok if I get a lighting to USB c cable...will it get enough power from the iPad ?
Hey, Stephen! The iPad can't power it if you plug it in directly, but you can using this adapter:
www.sweetwater.com/store/detail/LightCamUSB3--apple-lightning-to-usb-3-camera-adapter
If you have any questions, feel free to reach out. Thanks!
Connor Smith, Sweetwater Sales Engineer, (800) 222 4700 ext. 1793, connor_smith@sweetwater.com
When plugging in my SE2200 condensor mic and pressing V48, light goes out. Have tried different things, including switching out MOTU m4. Still no success.
How well does the M Series work with Logic Pro X...would you recommend it?
Definitely! The M2 and M4 are both great interfaces, especially for the price. They work really well with Logic and are also compatible with Big Sur and the new M1 Macs.
Let me know if you have any other questions!
Connor Smith, Sweetwater Sales Engineer, (800) 222-4700 ext. 1793, connor_smith@sweetwater.com
For my M2, when plugged into the 1L input (XLR or instrument cable), the left channel's audio is significantly higher than the right channel's audio, no matter if 1) MON is not pressed, 2) MON is pressed, or 3) MON is held so there's a blue bar. How do I fix this? I use a Mac fyi.
Hey Jeremy, if you're comparing Inputs 1 and 2 with the same source of audio, make sure that the Gain knobs (levels) are set equally. If this continues to happen, I suggest contacting our tech support team for further assistance.
motu.com/support
Motu vs Audient iD14 (I see that I'm not first asking for this). Can anyone say which one has better quality DA conversion? How they sound compared?
Motu by far: 120db dynamic range with ESS to the 1d14 116db dynamic range with BurBrown converters.
@@KeithMarvK Motu - 120 dB but iD14 is 114 dB un-weighted
and 117 dB A-weighted. I wonder if Motu's 120 is un-weighted
or A-weighted because Motu doesn't specify it.
@@darekk7459 companies usually boast the highest number. The higher number is always A-weighted since it deals with the range humans can hear the clearest. MOTU M4 unweighted is probably as low as the Audient's A- weighted figure.
I've had to send my iD14 back twice and now the first preamp died, which is how I ended up here. Needless to say I would recommend another brand.
@@SpeaksThruSong92 What you said,sadly. Our first iD14 was great,second iD14 and iD44 were junk. Sure got our attention,no longer fans. The M4's beat them on all fronts.
Just ordered an M2!
Hi, two questions: can the interface handle 600 ohms headphones?, and... does it has enough power for an sm7b mic?, thanks!
Hey, Gerardo! Great question! These are designed to handle professional level headphones, so they will certainly handle the ones you've described. It CAN handle an SM7B. However, it's not going to have as much gain as a Cloudlifter in the preamps, so while it will work, it will work better if you still use a Cloudlifter. I'd love to chat more about it. Give me a shout at the contact info below and we can discuss it further!
Rock on! 🎶🤘
Cassie O'Hanlon, Sweetwater Sales Engineer, (800) 222-4700 ext. 3020, cassie_ohanlon@sweetwater.com
@@sweetwater Cassie thanks for your kind attention. I hope to get in touch with you, I have other questions, greetings!
@@sweetwater hey Cassie I wrote you an e-mail regarding the Cloudlifter statement as I don't think it is neccessary based on numbers. Thanks for checking!
Could I go M2>USB hub (via USB C-3.0 cable)>iPad Pro? I'm trying to avoid a silly dongle as well as maintain power delivery to the iPad itself... Thanks!
Hey, Matt. Thanks for reaching out! In theory, there is no reason that shouldn't work. As long as the hub is a POWERED usb hub that can supply the needed electrical wattage output for the interface, you should be fine.
Mickey Cushing, Sweetwater Sales Engineer, (800) 222-4700 ext. 3024, Mickey_Cushing@Sweetwater.com
Can you use this on the 2020 ipad pro with two mics for a podcast?
Of course!
How is it possible that if we connect a MOTU M4 to a computer USB 2.0 (which supports 5 V of maximum voltate and 500 mA of maximum current) that we can power a phantom powered microphone of 48 Volts? How does MOTU from 5 V make 48 V phantom?
Think of voltage like you would water running through a pipe. If you constrict the hose, the water speed on the fat side is much slower than the water speed on the skinny side, even though the pressure on the fat side hasn't changed. But, the size of the stream on the skinny side is ...skinny. If you multiply the speed by the area, you have what amounts to power, and it's constant on both sides of the constriction. Likewise, voltage is like the area of the stream, and current is like the speed of the stream. By fiddling with circuits, you can make the voltage higher, but for the same power, the current will be lower. That's okay with a condenser mic, as it uses almost zero power. It just needs the voltage.
So what can I plug into the 3rd and 4th input on the m4? The idea would be to use two mics up front and two (acoustic) guitars through the back. Is that doable straight up with how the interface is set up? otherwise I think I saw a comment somewhere where you would just have to put another preamp between your instrument and that line in. Any info would be helpful!
Hi, Andy. Great question! The 3/4 inputs on the M4 are line level, meaning that the level on an acoustic guitar is going to be a little low going into them (depending on how hot the output on the acoustic guitar preamp is). Using a DI or preamp pedal before those inputs will help to solve this. Feel free to reach out if you would like to go into more detail on what is best for your needs. Thanks!
Jason Filloramo, Sweetwater Sales Engineer, (800) 222-4700 ext. 1281, Jason_Filloramo@sweetwater.com
HI, The M4 has the "Input/Playback" mix knob, as the M2 doesn't have the knob, is it controlled/adjusted in software on your PC?
Hi, Stephen. Great question! Though the M2 does have input monitoring capabilities, it does not have the ability to blend the input signal with the DAW playback like the M4. More on that here:
ruclips.net/video/GnvfNx2TGFs/видео.html
Thanks for the interest!
Cody Kraus, Sweetwater Sales Engineer, (800) 222-4700 ext. 1766, cody_kraus@sweetwater.com
I had the same question, thank you for asking and thanks Sweetwater for answering. 🙌🏼
Great video, I am interested in the MOTU M4, but how do I connect 2 mics + 2 instruments (input 1-4) at the same time?
Hello, Michael. Thanks for reaching out, it's Mickey from Sweetwater! The MOTU M4 has two mic or instrument level inputs on the front, and two line level inputs on the back. If you are using a keyboard, synth, or drum machine, you should be able to connect without preamplification. Alternatively, you can use a two channel mics preamp and connect their line level outputs to the back of the M4 to get two additional channels of mic or instrument input. Give us a call with any questions!
Mickey Cushing, Sweetwater Sales Engineer, (800) 222-4700 ext. 3024, Mickey_Cushing@Sweetwater.com
@@sweetwater Thanks for the help, Mickey! I am not in the US though. Do you have an intl number?
Can't get rid of jittering audio in monitors after some usage.
Do you really need the mix knob on the M4 to hear currently recorded DAW tracks while you are adding new ones?
Not necessarily if you're monitoring an input signal through your DAW. The mix knob blends the direct input signal vs computer audio if you were monitoring the input using the MON buttons
The input-monitor knob, Is It possible to control on the m2 via software?
Hey, Georgia! I'm not certain I 100% understand the question, but I definitely want to get you some answers. Are you asking whether or not you can use software to control the parameters (like gain control, output volume, etc) on the hardware? Give me a shout at the contact info below and we can discuss your needs further.
Rock on! 🎶🤘
Cassie O'Hanlon, Sweetwater Sales Engineer, (800) 222-4700 ext. 3020, cassie_ohanlon@sweetwater.com
@@sweetwater I think the question is do the pots/encoders have hard stops, and if so, are they motor controlled by the DAW. Or do the pots/encoders lack hard stops, so are free to turn any number of times? This would negate the need to motor control the knobs.
Hi there ! I see that in the package a USB-C to USB-A cable is included. And I am wondering if I could use a USB-C to USB-C cable to use this sound card ? Since I would like to free up a USB-A port on my laptop when using this. Thanks !
Hey there! Great question! This will absolutely work USB-C to USB-C, so you should have no problems there! I'd love to chat more about your setup if you'd like to give me a shout at the contact info below.
Rock on! 🎶🤘
Cassie O'Hanlon, Sweetwater Sales Engineer, (800) 222-4700 ext. 3020, cassie_ohanlon@sweetwater.com
I know these are desktop interfaces but I would love to get my M4 into my rack.
Can i connect the m4 to the American Audio DB display mkII?
Sure can!
Hey there! Will this interface work correctly and offer all its low latency advantages with the Acoustica Mixcraft DAW? Thanks!!!
Absolutely! With our M Series drivers installed for these devices, both deliver an ultra-low, class-leading speed of 2.5 ms Round Trip Latency (at 96 kHz with a 32 sample buffer). You'll be able to use this in Mixcraft no problem.
@@motuTVAwesome! Me want one soooooo bad! Any way to buy these in Mexico? Was thinking of buying through sweetwater, but not sure if they will ship internationally in these times of madness. Thank you for responding and congrats on this amazing amazing unit. Regards!
@@dantearturorodriguezcamach2613 This may be helpful to you!
motu.com/other/distributors.html
Is there advantage for using an interface simply for monitoring my edits’ audio (through headphones)? I don’t have a need for recording through it, just yet anyway. LoL Glad I found this option to consider before making a purchase.
Hi, Jeff! Thanks for your interest. Although interfaces like these are primarily used for recording, there would be a couple benefits to using one purely for monitoring and editing: the digital-to-analog conversion is likely to be higher quality than your computer's built-in sound card, and the headphone amp built into the interface is also probably more powerful than the headphone jack on your computer. The output level meter might also be useful to make sure you are not clipping at all. Hope this helps a bit, and feel free to contact me directly with any further questions!
Caleb Lowrey, Sweetwater Sales Engineer, (800) 222-4700 ext. 1620, caleb_lowrey@sweetwater.com
which one is better : id14 vs m4?
유영훈Younghoon did you ever get this question answered? Outside of RUclips. I’m still looking for an answer to that same question too
Does M4 work with 2018-2019 iPad Air or iPad Pro (both assuming camera connection kit) since the USB is supplying the power? ⎋ or is a powered hub required (which kind of defeats the purpose of using a USB powered device).
it does not work with iPad! (directly) from the product web site: "iOS compatible (with adapter kit and powered USB hub)"
@Dr. Conflict why is it 'obvious' that it needs a powered hub? the videos say only "you can plug it into an ios device" or "it is compatible with an ios device". and adding a hub to an ipad to plug into the interface is a significant requirement both in terms of cost and setup.
For iOS use, power is required via an adapter or hub. For iOS devices with a Lightning port, an Apple Lightning to USB3 Camera Adapter is required.
motu.com/techsupport/technotes/m-series-ios-power
@@motuTV thanks for the answer!
2.5ms of latency round-trip, but at what settings? What is the sample rate for that latency result?
96khz at 32 samples per buffer
Is this Motu M4 better than Scarlett 3rd gen?
Yes, anything is better than everything made by Focusrite. Go read all of their reviews especially starting with the 2i2 first gen. People spent lots of time and money getting them and spending days trying to get it to work but it's just garbage then the 2nd gen, garbage and so on
@@nukpruf9501 for now maybe, they just bought Adam Audio, so hopefully, their products will be improved down the line...
@@nukpruf9501 no any problems with Solo 2th Gen under MAC.
@@nukpruf9501 Except Focusrites higher end Pro Audio products from its Pro division. I stopped buying Focusrites "Prosumer" stuff. The Pro stuff is way better as I bought the Classix ISA pre amp. Other than that I use a Motu 828ES as my main converter.
Do the 1/4 inch line-ins go straight to converters (no preamp circuit)? It has RCA outs...forgive my inexperience with these, can, say an FMR RNC get patched into this interface?
Hello! Thank you for your interest! The M4 has a pair of line inputs that would go straight to the converters on the back of the unit, as well as some 1/4 inch line outputs that would be perfect for patching in an FMR RNC! If you've got other questions on how these awesome new MOTU interfaces will work in your studio, feel free to give us a call!
Justin Sunday, Sweetwater Sales Engineer, (800) 222-4700 ext. 1966, Justin_Sunday@Sweetwater.com
Will the loopback function offer the output of a 2ch downmix of the computer (coming in through USB) and the other channels (coming in through XLR)? Or do I have to mix them in the DAW software?
Hey, Christopher! You have the option of mixing those tracks in a DAW, but you don't have to. You can mix with live inputs and disk tracks if you so choose inside of your DAW. I'd love to chat with you more about the process if you'd like to give me a shout at the contact info below.
Rock on! 🎶🤘
Cassie O'Hanlon, Sweetwater Sales Engineer, (800) 222-4700 ext. 3020, cassie_ohanlon@sweetwater.com
@@sweetwaterThis is honestly amazing customer service.
Is this capable of amplifying the output on 250 ohm headphones like beyerdynamic 770 pro ?
Hey, Hrishikesh! Thanks for your interest. These MOTU interfaces are definitely capable of powering the DT770 Pro headphones. The headphone amp is surprisingly powerful given that it’s a bus powered interface.
If you have any other questions just let me know, hopefully this helped!
Connor Smith, Sweetwater Sales Engineer, (800) 222-4700 ext. 1793, connor_smith@sweetwater.com
@@sweetwater Thanks
I really need to know where i can find something to explain how i can update the firmware on my motu M4, because the software they provide on their website does not detect my motu m4, only the basic quality software under motu m series, and with that software you do not have the firmware update option.
IS this usbc or usb a??? So if I use usbc to usbc, it should be decreased latency?
Thanks for reaching out! The interface has a USB-C connector and uses the USB 2.0 protocol. Because it's utilizing 2.0, it won't necessarily have any increased or decreased latency when using it with a USB-C or USB-A computer. If you have any other questions feel free to contact me!
Connor Smith, Sweetwater Sales Engineer (800) 222-4700 ext. 1793, connor_smith@sweetwater.com
I've just bought the m4 and for 2 days now I can't get it to work. When I play back music from my daw or RUclips on the headphones and it all sounds like it's going through tonnes of reverb and flange and I can't hear anything clearly. I'm using windows 11 and have installed the latest firmware. I've tried all the buffer settings and other things too but still can't get it to work. I did notice though when I playback the windows test sounds, they played back perfectly and clear.
Any ideas anyone?
Which is Best for poetry motu m2 or Audient id4
For poetry? Just get a USB mic and plug it into your computer. A Yeti would be more than enough
Does the M2 and M4 work in fl studio? fl studio 12 to be precise
Thanks for your interest! The M2 and the M4 should work just fine with FL Studio 12, so long as the system you are running it on meets the specs required for the Motu to operate (OSX 10.11 or higher, or Windows 7 or higher). If you've got any other questions on how to use these interfaces with your setup, feel free to give us a call!
Justin Sunday, Sweetwater Sales Engineer, (800) 222-4700 ext. 1966, Justin_Sunday@Sweetwater.com
@@sweetwater does it work with 32 bit DAW?
How about the A/D side? ESS Sabre32 Ultra as well? Pre's usable?
Hi friends from Sweetwater, can i use with Android 10 devices like Xiaomi phones?. Thanks!.
Did you ever figure this out? I am interested in a low cost solution that I can pop into my guitar case (or tie to it) for fun on the road, that can double as a more serious solution at home.
@@eventhisidistaken Just take IK Multimedia iRig 2
Motu M4 work in GarageBand ?
can these drive 250 ohm headphones tho??
Hey, EddieTaco. The MOTU M2 and M4 do have a very good built in headphone amp. They can easily drive the 250 ohm headphones and they will still have a very solid level. The headphone amp on the interface is 190mW at 55 ohms and is pretty substantial for a smaller bus powered interface.
Thanks,
Grant Embury, Sweetwater Sales Engineer, (800) 222-4700 ext. 1647, Grant_embury@Sweetwater.com
@@sweetwater thanks! Will picking this up real soon and test out the dt 990 pros !
The links to the interfaces in your shop don't seem to work :(
same here
Works now.
Would this be a good first audio interface??
Hey, Giovone! Either of these would be a great starting point for a recording setup. We just need to make sure it has the right inputs and outputs for what you want to accomplish. Feel free to reach out if I can help. Thanks for your question!
Connor Smith, Sweetwater Sales Engineer, (800) 222 4700 ext. 1793, connor_smith@sweetwater.com
What is being monitored on headphones on the m4? Is it out 1-2 or 3-4 or is it switchable?
Out 1-2, not switchable
@@motuTV So I guess out 3-4 could be used to process audio through outboard, and recorded back in via the line ins?
Yay for the software improvement!!🤘🏻
Are they battery powered and rechargeable
They are not - just USB powered.
Would I be able to plug this into an iPad (with lightning connection w/USB Camera dongle) and record a live stream from Skype and my own out of XLR mic on 2 separate tracks?
Hello, Peter! Although the M4 is compatible with iOS, what you're looking to do is different. Give us a call to talk about the correct rig in more detail. Thanks for the interest!
Jorge Padilla, Sweetwater Sales Engineer, (800) 222-4700 ext. 1731, Jorge Padilla@sweetwater.com
Question about the M4: How do I regulate the gain for the two line input channels on the back? I only see knobs to regulate gain for the two combination inputs, but not for the two line ins in the back...
Hi, thanks for your interest! The line inputs on the M4 do not have any gain controls. You would control the level from the sound source you have plugged into them, i.e. a keyboard or mixer with line-level outputs. For more details and specs, you can check out MOTU's user guide at this link:
cdn-data.motu.com/manuals/usb-c-audio/M_Series_User_Guide.pdf
Hope this helps, and feel free to reach out to me directly with further questions!
Caleb Lowrey, Sweetwater Sales Engineer, (800) 222-4700 ext. 1620, caleb_lowrey@sweetwater.com
@@sweetwater Thanks for the input!
In that case, I'd need a different interface. My issue is, I'm trying to connect two guitars, a bass and a mic at the same time, and all those instruments have different pre-amps installed (some active and passive pick-ups on the guitars) so they all need different gain settings and monitoring in the interface... I was hoping I could use the M4 for it because the specs are legendary ;)
Is there a comparable device out there you know of that could do this job? I'm not aware if Motu produces something with 4 inputs that each have gain monitoring, which is a pity...
Something like the Scarlett 18i8 perhaps?
@@Chretze Hey Chretze, thanks for the reply. I got your email as well and I'm sending a more detailed response there, too. The short answer is: anytime you're connecting a guitar or bass directly to your interface, you really want to use an input that's designed for an instrument-level signal. However, it is possible to use external preamps or DI's to get an instrument or mic into a line-level input. The 18i8 is a good option, but it also just has two instrument level inputs - the other two preamps are mic/line only and don't have the correct impedance for guitars. We'll pick this up over email! Thanks again!
Caleb Lowrey, Sweetwater Sales Engineer, (800) 222-4700 ext. 1620, caleb_lowrey@sweetwater.com
Hi Mitch how ya doing? long time no see! Great video well explained! The only thing wrong? next time give the product a quick wipe down to get all the styrofoam and dust off. "Presentation is everything" or so I'm told lol :)